/[dynamips]/upstream/dynamips-0.2.6-RC4/dev_c3725_iofpga.c
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Contents of /upstream/dynamips-0.2.6-RC4/dev_c3725_iofpga.c

Parent Directory Parent Directory | Revision Log Revision Log


Revision 5 - (show annotations)
Sat Oct 6 16:08:03 2007 UTC (16 years, 5 months ago) by dpavlin
File MIME type: text/plain
File size: 9153 byte(s)
dynamips-0.2.6-RC4

1 /*
2 * Cisco 3725 simulation platform.
3 * Copyright (c) 2006 Christophe Fillot (cf@utc.fr)
4 *
5 * This is very similar to c2691.
6 */
7
8 #include <stdio.h>
9 #include <stdlib.h>
10 #include <string.h>
11 #include <unistd.h>
12 #include <sys/types.h>
13 #include <termios.h>
14 #include <fcntl.h>
15 #include <pthread.h>
16
17 #include "ptask.h"
18 #include "mips64.h"
19 #include "dynamips.h"
20 #include "memory.h"
21 #include "device.h"
22 #include "dev_vtty.h"
23 #include "nmc93c46.h"
24 #include "dev_c3725.h"
25
26 /* Debugging flags */
27 #define DEBUG_UNKNOWN 1
28 #define DEBUG_ACCESS 0
29
30 /* Definitions for Mainboard EEPROM */
31 #define EEPROM_MB_DOUT 3
32 #define EEPROM_MB_DIN 2
33 #define EEPROM_MB_CLK 1
34 #define EEPROM_MB_CS 0
35
36 /* Definitions for Network Modules EEPROM */
37 #define EEPROM_NM_DOUT 7
38 #define EEPROM_NM_DIN 6
39 #define EEPROM_NM_CLK 2
40 #define EEPROM_NM_CS 4
41
42 #define C3725_NET_IRQ_CLEARING_DELAY 16
43
44 /* IO FPGA structure */
45 struct iofpga_data {
46 vm_obj_t vm_obj;
47 struct vdevice dev;
48 c3725_t *router;
49
50 /*
51 * Used to introduce a "delay" before clearing the network interrupt
52 * on 3620/3640 platforms. Added due to a packet loss when using an
53 * Ethernet NM on these platforms.
54 *
55 * Anyway, we should rely on the device information with appropriate IRQ
56 * routing.
57 */
58 int net_irq_clearing_count;
59
60 /* Interrupt mask*/
61 m_uint16_t intr_mask;
62 };
63
64 /* Mainboard EEPROM definition */
65 static const struct nmc93c46_eeprom_def eeprom_mb_def = {
66 EEPROM_MB_CLK, EEPROM_MB_CS,
67 EEPROM_MB_DIN, EEPROM_MB_DOUT,
68 };
69
70 /* Mainboard EEPROM */
71 static const struct nmc93c46_group eeprom_mb_group = {
72 1, 0, "Mainboard EEPROM", 0, { &eeprom_mb_def },
73 };
74
75 /* NM EEPROM definition */
76 static const struct nmc93c46_eeprom_def eeprom_nm_def = {
77 EEPROM_NM_CLK, EEPROM_NM_CS,
78 EEPROM_NM_DIN, EEPROM_NM_DOUT,
79 };
80
81 /* NM EEPROM */
82 static const struct nmc93c46_group eeprom_nm_group = {
83 1, 0, "NM EEPROM", 0, { &eeprom_nm_def },
84 };
85
86 /*
87 * dev_c3725_iofpga_access()
88 */
89 static void *
90 dev_c3725_iofpga_access(cpu_mips_t *cpu,struct vdevice *dev,
91 m_uint32_t offset,u_int op_size,u_int op_type,
92 m_uint64_t *data)
93 {
94 struct iofpga_data *d = dev->priv_data;
95
96 if (op_type == MTS_READ)
97 *data = 0x0;
98
99 #if DEBUG_ACCESS
100 if (op_type == MTS_READ) {
101 cpu_log(cpu,"IO_FPGA","reading reg 0x%x at pc=0x%llx (size=%u)\n",
102 offset,cpu->pc,op_size);
103 } else {
104 cpu_log(cpu,"IO_FPGA",
105 "writing reg 0x%x at pc=0x%llx, data=0x%llx (size=%u)\n",
106 offset,cpu->pc,*data,op_size);
107 }
108 #endif
109
110 switch(offset) {
111 /*
112 * Platform type ?
113 * 0x04 and 0x05 seem to work.
114 */
115 case 0x36:
116 if (op_type == MTS_READ)
117 *data = 0x04 << 5;
118 break;
119
120 /* Mainboard EEPROM */
121 case 0x0e:
122 if (op_type == MTS_WRITE)
123 nmc93c46_write(&d->router->mb_eeprom_group,(u_int)(*data));
124 else
125 *data = nmc93c46_read(&d->router->mb_eeprom_group);
126 break;
127
128 case 0x12:
129 /*
130 * Bit 0: 1=No WIC in slot 0 ?
131 * Bit 1: 1=No WIC in slot 1 ?
132 * Bit 2: 1=No WIC in slot 2 ?
133 */
134 if (op_type == MTS_READ)
135 *data = 0x0007;
136 break;
137
138 case 0x14:
139 if (op_type == MTS_READ)
140 *data = 0xFFFF;
141 break;
142
143 case 0x18:
144 if (op_type == MTS_READ)
145 *data = 0xFFFF;
146 break;
147
148 /* wic/vwic related */
149 case 0x40:
150 if (op_type == MTS_READ)
151 *data = 0x0004;
152 break;
153
154 /* WIC related: 16-bit data */
155 case 0x42:
156 break;
157
158 /* NM Slot 1 EEPROM */
159 case 0x44:
160 if (op_type == MTS_WRITE)
161 nmc93c46_write(&d->router->nm_eeprom_group[0],(u_int)(*data));
162 else
163 *data = nmc93c46_read(&d->router->nm_eeprom_group[0]);
164 break;
165
166 /* NM Slot 2 EEPROM */
167 case 0x46:
168 if (op_type == MTS_WRITE)
169 nmc93c46_write(&d->router->nm_eeprom_group[1],(u_int)(*data));
170 else
171 *data = nmc93c46_read(&d->router->nm_eeprom_group[1]);
172 break;
173
174 /* AIM EEPROM #0 */
175 case 0x48:
176 if (op_type == MTS_READ)
177 *data = 0xFFFF;
178 break;
179
180 /* AIM EEPROM #1 */
181 case 0x4a:
182 if (op_type == MTS_READ)
183 *data = 0xFFFF;
184 break;
185
186 /*
187 * NM Presence.
188 *
189 * Bit 7: 0=NM present in slot 1.
190 * Bit 11: 0=NM present in slot 2.
191 * Other bits unknown.
192 */
193 case 0x20:
194 if (op_type == MTS_READ) {
195 *data = 0xFFFF;
196
197 if (c3725_nm_check_eeprom(d->router,1))
198 *data &= ~0x0008;
199
200 if (c3725_nm_check_eeprom(d->router,2))
201 *data &= ~0x0800;
202 }
203 break;
204
205 /* ??? */
206 case 0x24:
207 break;
208
209 /* Intr Mask (sh platform) */
210 case 0x30:
211 if (op_type == MTS_READ)
212 *data = d->intr_mask;
213 else
214 d->intr_mask = *data;
215 break;
216
217 /*
218 * Network interrupt status.
219 *
220 * Bit 0: 0 = GT96100 Ethernet ports.
221 * Other bits unknown.
222 */
223 case 0x26:
224 if (op_type == MTS_READ)
225 *data = 0xFFFE;
226 break;
227
228 /*
229 * Network interrupt status.
230 *
231 * Bit 0: 0 = NM in Slot 1.
232 * Bit 8: 0 = NM in Slot 2.
233 * Other bits unknown.
234 */
235 case 0x28:
236 if (op_type == MTS_READ) {
237 *data = 0xFFEE;
238
239 if (++d->net_irq_clearing_count == C3725_NET_IRQ_CLEARING_DELAY) {
240 vm_clear_irq(d->router->vm,C3725_NETIO_IRQ);
241 d->net_irq_clearing_count = 0;
242 }
243 }
244 break;
245
246 case 0x2c:
247 if (op_type == MTS_READ)
248 *data = 0xFFFF;
249 break;
250
251 /* OIR interrupt but not supported (IRQ 6) */
252 case 0x2e:
253 if (op_type == MTS_READ)
254 *data = 0xFFFF;
255 break;
256
257 /*
258 * Environmental monitor, determined with "sh env all".
259 *
260 * Bit 0: 1 = Fan Error
261 * Bit 1: 1 = Fan Error
262 * Bit 2: 1 = Over-temperature
263 * Bit 3: ???
264 * Bit 4: 0 = RPS present.
265 * Bit 5: 0 = Input Voltage status failure.
266 * Bit 6: 1 = Thermal status failure.
267 * Bit 7: 1 = DC Output Voltage status failure.
268 */
269 case 0x3a:
270 if (op_type == MTS_READ)
271 *data = 0x0020;
272 break;
273
274 /*
275 * Bit 0: Slot0 Compact Flash presence.
276 * Bit 1: System Compact Flash presence.
277 */
278 case 0x3c:
279 if (op_type == MTS_READ) {
280 *data = 0xFFFF;
281
282 /* System Flash ? */
283 if (cpu->vm->pcmcia_disk_size[0])
284 *data &= ~0x02;
285
286 /* Slot0 Flash ? */
287 if (cpu->vm->pcmcia_disk_size[1])
288 *data &= ~0x01;
289 }
290 break;
291
292 #if DEBUG_UNKNOWN
293 default:
294 if (op_type == MTS_READ) {
295 cpu_log(cpu,"IO_FPGA",
296 "read from unknown addr 0x%x, pc=0x%llx (size=%u)\n",
297 offset,cpu->pc,op_size);
298 } else {
299 cpu_log(cpu,"IO_FPGA",
300 "write to unknown addr 0x%x, value=0x%llx, "
301 "pc=0x%llx (size=%u)\n",offset,*data,cpu->pc,op_size);
302 }
303 #endif
304 }
305
306 return NULL;
307 }
308
309 /* Initialize EEPROM groups */
310 void c3725_init_eeprom_groups(c3725_t *router)
311 {
312 /* Initialize Mainboard EEPROM */
313 router->mb_eeprom_group = eeprom_mb_group;
314 router->mb_eeprom_group.eeprom[0] = &router->mb_eeprom;
315 router->mb_eeprom.data = NULL;
316 router->mb_eeprom.len = 0;
317
318 /* EEPROM for NM slot 1 */
319 router->nm_eeprom_group[0] = eeprom_nm_group;
320 router->nm_eeprom_group[0].eeprom[0] = &router->nm_bay[1].eeprom;
321
322 /* EEPROM for NM slot 2 */
323 router->nm_eeprom_group[1] = eeprom_nm_group;
324 router->nm_eeprom_group[1].eeprom[0] = &router->nm_bay[2].eeprom;
325 }
326
327 /* Shutdown the IO FPGA device */
328 void dev_c3725_iofpga_shutdown(vm_instance_t *vm,struct iofpga_data *d)
329 {
330 if (d != NULL) {
331 /* Remove the device */
332 dev_remove(vm,&d->dev);
333
334 /* Free the structure itself */
335 free(d);
336 }
337 }
338
339 /*
340 * dev_c3725_iofpga_init()
341 */
342 int dev_c3725_iofpga_init(c3725_t *router,m_uint64_t paddr,m_uint32_t len)
343 {
344 vm_instance_t *vm = router->vm;
345 struct iofpga_data *d;
346
347 /* Allocate private data structure */
348 if (!(d = malloc(sizeof(*d)))) {
349 fprintf(stderr,"IO_FPGA: out of memory\n");
350 return(-1);
351 }
352
353 memset(d,0,sizeof(*d));
354 d->router = router;
355
356 vm_object_init(&d->vm_obj);
357 d->vm_obj.name = "io_fpga";
358 d->vm_obj.data = d;
359 d->vm_obj.shutdown = (vm_shutdown_t)dev_c3725_iofpga_shutdown;
360
361 /* Set device properties */
362 dev_init(&d->dev);
363 d->dev.name = "io_fpga";
364 d->dev.phys_addr = paddr;
365 d->dev.phys_len = len;
366 d->dev.priv_data = d;
367 d->dev.handler = dev_c3725_iofpga_access;
368
369 /* Map this device to the VM */
370 vm_bind_device(router->vm,&d->dev);
371 vm_object_add(vm,&d->vm_obj);
372 return(0);
373 }

  ViewVC Help
Powered by ViewVC 1.1.26