upstream/2.1.0/ChangeLog

#========================================================================
#
# ChangeLog - change log for BackupPC.
#
# DESCRIPTION
#   Revision history for BackupPC, detailing significant changes between
#   versions, most recent first.
#
# AUTHOR
#   Craig Barratt  <cbarratt@users.sourceforge.net>
#
#========================================================================
#
# Version 2.1.0, released 20 Jun 2004.
#
# See http://backuppc.sourceforge.net.
#
#========================================================================

#------------------------------------------------------------------------
# Version 2.1.0, 20 Jun 2004
#------------------------------------------------------------------------

* Added Dutch translation from Lieven Bridts, with tweaks from
  Guus Houtzager.

* Added PC-specific config file read in CGI/Archive.pm.  Patch
  from Pete Wenzel.

* Added non-zero exit code to BackupPC_zcat when uncompress fails.
  Patch from Pete Wenzel.

* Cosmetic changes to PC Summary and Log file language strings from
  Pete Wenzel.

* BackupPC::Lib tries to be more careful when renaming the backups
  file to backups.old.  There have been reports of backups being
  empty, perhaps when the BackupPC data file system fills up.
  Now backups is not renamed to backups.old if backups is empty.

* BackupPC now closes stderr and stdout before renaming and
  re-opening the log file.

* Pre/post backup/restore/archive commands now correctly set
  "type" to either incr/full/restore/archive, and now cmdType
  is the type of Pre/post backup/restore/archive command.

* BackupPC_archive correctly terminates archive processes on
  alarm or cancel.

* Updates to BackupPC_stnd.css with absolute font sizes instead
  of relative.

* BackupPC_dump now makes sure that the $Conf{FullAgeMax} check
  also ensures the full backup is older than the maximum age
  expected from $Conf{FullPeriod}.

#------------------------------------------------------------------------
# Version 2.1.0beta2pl1, 30 May 2004
#------------------------------------------------------------------------

* Fixed bug in rsync checksum caching code in BackupPC::Xfer::RsyncDigest.

* BackupPC_zipCreate now ensures the earliest mtime is 1/1/1980,
  since zip file formats don't support earlier dates.  Reported
  by Dan Niles.

* CGI restore via zip and tar now makes sure stderr is ignored
  when BackupPC_tarCreate and BackupPC_zipCreate are run.
  Previously any stderr output would get mixed in the archive,
  corrupting it.  Reported by Dan Niles.

#------------------------------------------------------------------------
# Version 2.1.0beta2, 23 May 2004
#------------------------------------------------------------------------

* $Conf{BackupFilesOnly} and $Conf{BackupFilesExclude} now apply
  to every share, rather than just the first, in the case where
  they are arrays and there are multiple shares.  Suggested
  by Andy Evans.

* On the phase 2 retry pass with rsync, verify the cached checksums
  if checksum caching is turned on.  This will catch the case of
  cached checksums being incorrectly appended to the compressed
  pool file.  Added new config parameter $Conf{RsyncCsumCacheVerifyProb}
  so that cached checksums are verified with a selectable probability.
  Also, increased File::RsyncP version number to 0.51.

* configure.pl now supports an optional batch mode.  Command-line
  options are used to specify all the information that configure.pl
  needs.  This is useful for building auto-install packages.
  Also, configure.pl now includes pod documentation, so you can do
  "perldoc configure.pl" to see all the command-line options.
  Suggested, tested and tweaked by Stuart Herbert for possible
  Gentoo inclusion.

* At each wakeup, clients are now queued based on how old the most
  recent backup is.  Clients with errors are queued first, with
  the oldest error times going first.  The rest of the clients are
  queued next, with the clients with the oldest backup going first.
  Previously the clients were simply queued in alphabetic order.
  Suggested by Mike Trisko and Tony Nelson.

* Added config parameter $Conf{PartialAgeMax} that controls whether
  partials are saved at all, and if so, whether the partial will be
  ignored at the next full backup if it is too old.

* BackupPC_tarExtract now allows empty archives without reporting
  an error.  Reported by Don Silvia.

* Removed Browse Backups link from Nav Bar in Archive Info display.
  Reported by Ralph Paßgang.

* Fixed documentation display for regular users.  Reported by Ralph Paßgang.

* Status and PC Summary now work for regular users and only show
  that user's hosts.  Server general status information only appears
  for admins.  Suggested by Ralph Paßgang.

* Moved the last three navigation-bar links (docs, FAQ and SF) to
  a new config parameter $Conf{CgiNavBarLinks}.  This allows
  these links to be locally configured.  Based on a patch
  submitted by Ralph Paßgang.

* Allow the navigation bar search box to be disabled by
  setting $Conf{CgiSearchBoxEnable} to 0.  Based on a patch
  submitted by Ralph Paßgang.

* Updates to de.pm from Ralph Paßgang.

* Made the BackupPC icon a link to the SF BackupPC project page.

#------------------------------------------------------------------------
# Version 2.1.0beta1, 4 Apr 2004
#------------------------------------------------------------------------

* The CSS definition has been removed from the config.pl file and
  is now a separate file, BackupPC_stnd.css.  A new config variable,
  $Conf{CgiCSSFile}, gives the name of the CSS file to use.
  Suggested by Ender Mathias.

* Fixed the filling of the host name select box for admins.
  The default $Conf{CgiNavBarAdminAllHosts} is now 1.
  Reported by Doug Lytle.

* Cleaned up warning message for restore using rsync when checksum
  caching is on, but when file didn't have cached checksums.

* Fixed BackupPC_archiveHost to support par2 (par2cmdline).
  Patch submitted by Jaco Bongers and adapted by Josh Marshall.

* Improved stat() usage in BackupPC_nightly, plus some other cleanup,
  giving a significant performance improvement.  Patch submitted by
  Wayne Scott.

* Allow several BackupPC_nightly processes to run in parallel based
  on new $Conf{BackupPCNightlyJobs} setting.  This speeds up the
  traversal of the pool, reducing the overall run time for
  BackupPC_nightly.

* Allow BackupPC_nightly to split the pool traversal across several
  nightly runs.  This improves the running time per night, at the expense
  of a slight increase in disk storage as unused pool files might not
  be deleted for a couple of days.  Controller by new config setting
  $Conf{BackupPCNightlyPeriod}.

#------------------------------------------------------------------------
# Version 2.1.0beta0, 20 Mar 2004
#------------------------------------------------------------------------

* A failed full dump is now saved as a partial (incomplete) dump,
  provided it includes some files.  This can be used for browsing,
  restoring etc, and will also form the basis of resuming full
  dumps.  Only one partial is kept, and it is removed as soon
  as a successful full (or a new partial) is done.

* Added support for resuming a full dump for rsync.  The partial
  full is kept, and to resume an incremental is done against the
  partial, and a full is done for the rest.

* Added support for Rsync checksum caching.  Rsync checksum are
  appended to the compressed pool files.  This means that block
  and file checksums do not need to be recomputed on the server
  when using rsync.  Requires a patch to rsync to support fixed
  checksum seeds.  This patch is included in the cygwin-rsyncd
  release on http://backuppc.sourceforge.net.

* Major addition of Archive feature from Josh Marshall.  Special
  clients can be configured to be archive targets (eg: tape drives,
  CD-R).  Any subset of the backup clients can be selected and tar
  archives are created, optionally compressed and split and written
  to the output device.  Logs are maintained and are browsable.

* Major changes from Ryan Kucera to add style sheets to the CGI
  interface, allowing easy customization.  Added new icons and
  BackupPC logo.  Numerous navigation improvements.

* Added directory history display to BackupPC_Admin, allowing the
  user to quickly see which files changed between backups on a
  per-directory basis.

* Added exponential expiry option for full dumps.  This allows you
  to specify
  
   - how many fulls to keep at intervals of $Conf{FullPeriod}, followed by
   - how many fulls to keep at intervals of 2 * $Conf{FullPeriod},
   - how many fulls to keep at intervals of 4 * $Conf{FullPeriod},
   - how many fulls to keep at intervals of 8 * $Conf{FullPeriod},
   - how many fulls to keep at intervals of 16 * $Conf{FullPeriod},

  and so on.  This allows you, for example, to keep 4 weekly fulls,
  followed by 6 fulls every 4 weeks (approx 1 month) and 2 fulls at
  16 weeks, for roughly 1 year of history.  This works by deleting
  every other full as each expiry boundary is crossed.  Suggested
  by David Cramblett.

* Added Italian language translation it.pm from Lorenzo Cappelletti.

* Major updates to language files for new features and tags changes.
  Updated makeDist to do pedantic consistency checking of language
  files.

* Addition of administration options from Paul Lukins.  Initial
  page allows server to be started/stopped/reloaded.  This still
  needs some i18n work.  Currently the server start/stop is
  commented out.

* Split BackupPC_Admin into a set of modules, one for each major action.
  Each action is now a seperate module in lib/BackupPC/CGI.

* Allow the blackout period begin/end to span midnight.  Adapted
  from patch submitted by David Smith.

* Allow multiple blackout periods, with new config variable
  $Conf{BlackoutPeriods} that replaces the old variables
  $Conf{BlackoutHourBegin}, $Conf{BlackoutHourEnd}, and
  $Conf{BlackoutWeekDays}.  Based on patch submitted by
  Lorenzo Cappelletti.

* Disabled alarms after forks to avoid timeouts in children that
  do not reset their alarm.  Prompted by ideas from James Leu.

* Added options for block size, buffer size and share wild-card to
  BackupPC_tarCreate.  Also added negative backup number options
  that are relative to the last (so -1 is the last), suggested by
  William McKee and Carl Soderstrom.

* The "Wrong user" message in BackupPC::Lib now goes to stderr, so that
  the user is more likely to see the error with BackupPC_tarCreate.
  Reported by Paul Fox.

* Add creation of per-PC directory in BackupPC/CGI/Restore.pm in
  case it doesn't already exist.

* Added -q -x to all ssh commands in conf/config.pl.  Suggested by
  SI Reasoning and Niranjan Ghate.

* Changed restore code so that option #1 (direct restore) can be
  disabled if the restore command is undefined.  Disabling direct
  restore is necessary if the share is read-only.  Suggested by
  Rich B from SAIC.

* Changed regexp in lib/BackupPC/Smb.pm to allow numbers with both
  a decimal point or comma for international versions of Samba.
  Patch submitted by Frank Gard.

* Browsing and directory history now sort the files in a
  case-insensitive manner.

* Changed exec() syntax to allow executing commands whose path
  contains spaces.

* BackupPC_dump no longer removes backups if $Conf{FullKeepCnt}
  is zero or undefined.  The protects the existing backups in the
  case of a bad config.pl file.  Suggested by Christian Warden.

* Swapped the Server and Hosts sections on the Nav bar.  Moved the
  host search text box to the top of the hosts section.  This was
  done to move the variable-length part of the Nav bar (when all
  hosts are displayed) to the bottom.

* Fixed a bug in tar restore related to how the common prefix path is
  removed.  Now ensure that the common path is at a directory boundary.
  Reported by Patrick Neuner.

* Added --chuid ${USER} to init.d/src/gentoo-backuppc.  Suggested by
  SI Reasoning, Pascal Pochol, Michael Evanoff and others.

* Added Suse notes to init.d/README from Bruno Vernay.

* Added Apache 2 documentation fix from Michael Tuzi.

#------------------------------------------------------------------------
# Version 2.0.2, 6 Oct 2003
#------------------------------------------------------------------------

* Fixed stupid last-minute change in octal size conversion in
  Backup_tarExtract.

#-----------------------------------------------------------------------
# Version 2.0.1, 5 Oct 2003
#------------------------------------------------------------------------

* Fixed handling of >= 8GB files in BackupPC_tarExtract and >= 4GB
  files in BackupPC_tarCreate.

* Removed smbclient size repair in BackupPC_tarExtract for files
  between 2GB and 4GB.  This means that BackupPC_tarExtract 2.0.1
  doesn't behave the same as 2.0.0 for file sizes between 2GB and 4GB
  extacted using smbclient 2.2.x.  If you have problems backing up
  files whose size is between 2GB and 4GB using smbclient 2.2.x
  you should upgrade smbclient to 3.0, since it now generates
  correct file sizes.

* Replace PingClientPath with PingPath in configure.pl.

* Removed -T (taint mode) on binaries installed in configure.pl.

* Added support for smbclient from samba version 3.0.0.

* Fixed $Conf{HardLinkMax} limit check in BackupPC::Lib; reported
  by Ross Skaliotis.

* In BackupPC_Admin, default REMOTE_USER to $Conf{BackupPCUser}
  if it is not defined.  This allows the CGI interface to work
  when AdminUsers = '*'.  Reported by Quentin Arce.

* For SMB, code that detected files with a read-locked region (eg:
  outlook .pst files), removed them and then tried to link with an
  earlier version was broken.  This code missed a step of mangling
  the file names.  This is now fixed.  Reported by Pierre Bourgin.

* A backup of a share that has zero files is now considered
  fatal. This is used to catch miscellaneous Xfer errors that
  result in no files being backed up.  A new config parameter
  $Conf{BackupZeroFilesIsFatal} (defaults to 1) and can be set to
  zero to turn off this check.  Suggested by Guillaume Filion.
  Additional change: this check only applies to a full dump.

* SMB: now detect NT_STATUS_ACCESS_DENIED on entire share or BackupFilesOnly
  (also ERRDOS - ERRnoaccess (Access denied.) for older versions of
  smbclient.)  Suggested by Guillaume Filion.

* SMB: now detects "tree connect failed: NT_STATUS_BAD_NETWORK_NAME" and
  the dump is considered failed.

* Rsync: Previously BackupFilesOnly = '/' did --include '/' --exclude '/*',
  which just included the '/' directory and nothing below.  Now it
  does just --include '/', which should include everything.
  Reported by denon.

* Add hostError to DumpPostUserCmd variable substitutions for both dump
  and restore.

* Verbose output in Lib.pm goes to STDERR, not STDOUT.  This now
  makes BackupPC_dump -v work better.

* Don't allow browsing with ".." in directory in case a user tries
  to trick BackupPC_Admin into displaying directories outside where
  they are allowed.

* Required File::RsyncP version is now 0.44, since File::RsyncP 0.44
  fixes large file (>2GB) bugs.  Large file bugs reported by Steve
  Waltner.

#------------------------------------------------------------------------
# Version 2.0.0, 14 Jun 2003
#------------------------------------------------------------------------

* Minor tweaks to disable utf8 on utf8-capable machines (eg: RH8+).
  Added "no utf8" to all programs, and added binmode() to relevant
  file handles.

#------------------------------------------------------------------------
# Version 2.0.0beta3, 1 Jun 2003
#------------------------------------------------------------------------

* Several improvements to restore: cancel now reports the correct
  message and cleans up correctly.

* Rsync with whitespace and wildcard excludes fixed by replacing
  argList with argList+ in config.pl plus a fix to Lib.pm for
  shell escaping array arguments.

* Fixed rsync restore for character and block special devices
  (major and minor device numbers weren't correctly restored).

* Fixed typo in bin/BackupPC_restore (XferLOG -> RestoreLOG).

* (Re)-fixed "Bad command" in log file when restore via tar or zip
  file download is done.

* Added untaint to exec in Lib.pm to avoid tainted errors.

* Applied additional tweak to hilight patch from Tim Demarest.

* $Conf{CgiAdminUsers} = '*' now allows privileged even with REMOTE_USER
  not set.

* Don't display RsyncdPasswd when displaying config.pl files.

* Replace pipe with socketpair in bin/BackupPC_dump and bin/BackupPC_restore,
  which increases typical buffering from 4K to 16K-64K.  This improves the
  performance.

* Add check on $ENV{LANG} setting do configure.pl: if LANG includes utf
  then a warning is printed.

#------------------------------------------------------------------------
# Version 2.0.0beta2, 11 May 2003
#------------------------------------------------------------------------

* Added German translation, provided by Manfred Herrmann.

* Fixed large-file problem with rsync, reported by Manfred Herrmann.

* Fixed zip and tar file download from CGI under mod_perl.  Reported
  by Pierre Bourgin and Paul Lukins.

* Fixed directory browsing and top-level directory browsing in 2.0.0beta0.
  Reported by several users.

* Added -v option to BackupPC_dump for verbose output (useful when
  you run the command manually).  Added messages for all exits.

* If nmblookup returns multiple IP addresses, NetBiosHostIPFind()
  now returns the first IP address that matches the subnet mask.
  Suggested by Tim Demarest.

* Fixed BackupPC::View so the top-level directory is handled correctly.
  This allows the top-level share/directory to be restored via the
  CGI interface.  Reported by several users.

* Fixed RsyncFileIO failures on certain large files by replacing seek()
  with sysseek().  Reported by Manfred Herrmann.

* Added configurable highlighting of PC status in the CGI summary
  screen; submitted by Tim Demarest.

* Fixed command queue CGI display; submitted by Tim Demarest.

* BackupPC_trashClean now logs an error if it can't remove all the
  trash and then goes back to sleep, rather than continually trying.

* Moved correct user (uid) check into BackupPC::Lib so that all
  applications do a user check if $Cong{BackupPCUserVerify} is
  set.  The avoids the risk of manually running BackupPC_dump as
  the wrong user.

* Loss of blackout now applies to "host not found" as well as no ping.
  Reported by Dale Renton.

* "Host not found" is now treated in a similar manner to "no ping".

* Added suse-linux init.d script from Leon Letto.

* Added Gentoo linux init.d script from Tim Demarest.

* Applied additional i18n strings from GFK and the translation team.

* Fixed option parsing so that getopts errors are reported and we exit.

* Changed reporting of Xfer PIDs so that rsync cancel works correctly.

#------------------------------------------------------------------------
# Version 2.0.0beta1, 30 Mar 2003
#------------------------------------------------------------------------

* Added Spanish translation es.pm from Javier Gonzalez.

* Fixed CGI browse navigation bug that causes BackupPC_Admin to wedge
  when directories were selected in a certain order.

* Fixed BackupPC::PoolWrite so that it can recover when the initial
  file size is wrong.  This is needed since rsync could write a file
  whose size is different from the initial size returned in the
  file list when that file is updated while rsync is running.

* Added binmode(STDIN) to BackupPC_tarExtract, suggested by Pat LoPresti
  to fix a problem a RedHat8 with perl 5.8.0.  It's unclear why this
  helps, but it should be benign.  See:
    http://sourceforge.net/mailarchive/forum.php?thread_id=1853018&forum_id=503

#------------------------------------------------------------------------
# Version 2.0.0beta0, 23 Feb 2003
#------------------------------------------------------------------------

* Support for rsync and rsyncd backup and restore.  Changes to
  BackupPC_dump, BackupPC_restore, and new modules BackupPC::Xfer::Rsync
  and BackupPC::Xfer::RsyncFileIO.

* Added internationalization (i18n) code from Xavier Nicollet,
  with additions from Guillaume Filion.  Voila!  BackupPC_Admin
  now supports English and French, and adding more languages is
  now easy.  New config paramater $Conf{Language} sets the language.

* Added optional user-defined pre/post dump/restore commands, allowing
  things like database shutdown/startup for dumps.

* Changed the way hosts are found.

* Added $Conf{ClientNameAlias}, which allows the name of the physical
  client machine to be set.  This allows several different backup
  "hosts" to all refer to the same physical machine, which is
  convenient if several different types of data need to be backed
  up, or if different parameters are needed for different parts of
  the host.

* Replaced $Conf{PingArgs} with $Conf{PingCmd}, added $Conf{DfCmd},
  $Conf{NmbLookupCmd} allowing all these commands to be fully
  configured.  Also, all commands can also now be fragments of
  perl code.

* Moved all smbclient commands into the config.pl file so the specific
  arguments can be customized.  New config parameters are
  $Conf{SmbClientFullCmd}, $Conf{SmbClientIncrCmd} and
  $Conf{SmbClientRestoreCmd}.

* Added new BackupPC::View module that creates views of backups
  (handling merging etc).  Updated BackupPC_Admin, BackupPC_zipCreate
  and BackupPC_tarCreate to use BackupPC::View.  This removes lots
  of merging and mangling code from the higher-level code.

* Added code from Toby Johnson that allows additional users to be
  specified in the hosts file; these users can also view/start/stop
  and restore backups for that host.  Also added a new config
  setting $Conf{CgiNavBarAdminAllHosts} that allows all hosts to
  be listed in the left nav bar for admins.

* Added $Conf{HardLinkMax} (default 31999) which sets the limit on
  the maximum number of hardlinks per file in the pool.  If a file
  ever gets to this number of links a new pool file is created to
  handle additional links.

* Added $Conf{PerlModuleLoad}, which allows optional additional perl
  modules to be loaded.

* Added $Conf{EMailUserDestDomain} and other EMail config settings to
  allow language-specific default messages to be overridden.

* Added BPC_FTYPE_DELETED to lib/BackupPC/Attrib.pm, allowing deleted
  files to be represented in the attrib file correctly.

* Added support for environment variable BPC_SMB_PASSWD, which is the
  client's smb password.  This overrides the old environment variable
  PASSWD.

* Added taint cleanup for perl5.8 to lib/BackupPC/Lib.pm.

* Changed $tar_unpack_header format in BackupPC_tarExtract to correctly
  handle files with trailing spaces.

* Added catching of SIG_PIPE to BackupPC_dump, and changed catch_signal
  to ignore multiple signals of the same type.

* Added reporting of the largest number of hardlinks in the pool to the
  log file.

* Adding reporting of syntax errors in the per-PC config.pl file.

* Updated BackupPC_sendEmail to handle language-specific email messages.

* Allow client (host) names to contain spaces.  Spaces in host names
  need to be escaped via "\" in the hosts file.  The user of spaces in
  host names is discouraged, but they should work.  One feature that
  doesn't work with host names that contain spaces is the highlighting
  of that name in the log file display in the CGI interface.  There are
  no plans to fix this.

* Renamed $Conf{SmbClientTimeout} to $Conf{ClientTimeout}.

* Fixed all open() calls to use 3 argument form to fix handling of file
  names with trailing whitespace.  Also fixed CGI interface so these
  file names are displayed correctly.

* Fixed new 2.0.0 CGI navigation bug that causes the top-level directory
  to have a URL "&share=//boot&dir=" instead of "&share=/boot&dir=/".
  Reported by Pascal Schelcher.  Fixed similar problem reported by
  Doug Lytle.

* Added "PerlTaintCheck On" to the mod_perl section in the docs,
  suggested by Tim Demarest.

#------------------------------------------------------------------------
# Version 1.5.0, 2 Aug 2002
#------------------------------------------------------------------------

* Changed conf/config.pl so that $Conf{TarIncrArgs} uses the --newer
  option instead of --newer-mtime.  Also removed --atime-preserve from
  $Conf{TarClientCmd}.  This makes the default settings work better
  with tripwire.

* Fixed configure.pl so it correctly detects a running BackupPC <= v1.4.0
  so it can correctly warn the user to stop it before upgrading.  Reported
  by David Holland.

* Added missing ";" to entity escape in EscapeHTML in BackupPC_Admin.
  Reported by Guillaume Filion.

* Added LDAP setup to documentation from David Holland.

* Tar.pm now adds a "." to file paths that start with "/", so that all
  tar paths are relative.  From Ludovic Drolez.

#------------------------------------------------------------------------
# Version 1.5.0beta0, 30 Jun 2002
#------------------------------------------------------------------------

* A full set of restore options is now supported, including direct
  restore via smbclient or tar or downloading a zip or tar file.

* Major additions to CGI script to support better directory navigation,
  restore features and mod_perl.  Also, file downloads from the CGI
  interface now correctly preserve the file name and provide the
  correct Content-Type for the most common types of files.  Improved
  directory navigation was contributed by Ryan Kucera.

* New script BackupPC_zipCreate (contributed by Guillaume Filion) is the
  zip analog of BackupPC_tarCreate.  BackupPC_zipCreate can be used to
  create a zip archive of any portion of a backup.

* Substantial additions to BackupPC_tarCreate to support restore,
  including modifying path names, handling hardlinks, fixing
  support of old backups without attributes (pre-v1.4.0).  Plus
  BackupPC_tarCreate is now an offical part of the release.
  (Lack of support for hardlinks was reported by John Stanley.)

* BackupPC_tarExtract now supports hardlinks and fixed pooling of
  attribute files.

* A unix domain socket is now used for communication between the CGI
  interface and BackupPC.  The original TCP socket is optional.  Sockets
  are correctly re-initialized if config.pl is updated with new socket
  settings.

* For improved security messages over the unix or TCP socket are protected
  via an MD5 digest based on a shared secret, a sequence number, a time
  stamp and a unique per-connection number.

* Additions to configure.pl to support install of directory navigation
  images.

* Fixed case where $Conf{BackupFilesOnly} or $Conf{BackupFilesExclude}
  were set to a single string or list (in v1.4.0 only the case of
  hash worked correctly).  Reported by Phillip Bertolus.

* Fixed case of $Conf{BackoutGoodCnt} == 0.  This setting now makes the
  client always subject to blackout, matching the comments in config.pl.
  Also fixed handling of $Conf{BackoutGoodCnt} < 0 in the CGI script
  reported by Pascal Schelcher.

* Fixed byte and file totals for tar backups, reported by several users.

* Fixed --newer-mtime date/timestamp format to make it ISO 8601 compliant,
  suggested by Erminio Baranzini.

* Fixed handling of $Conf{BackupFilesOnly} in BackupPC::Xfer::Tar.pm, as
  well as shell escaping of tar arguments.

* Fixed entity encoding of 8-bit characters in the CGI interface.

* Added optional CGI headers in $Conf{CgiHeaders} that by default
  is set to a no-cache pragma.  Suggested by Benno Zuure.

#------------------------------------------------------------------------
# Version 1.4.0, 16 Mar 2002
#------------------------------------------------------------------------

* BackupPC now supports tar (in addition to smb) for extracting host    
  data.  This is the most convenient option for linux/unix hosts.
  Tar can be configured to run over ssh, rsh or to backup a local
  nfs mount from the host.

* Support for special files, including symbolic links, fifo, character
  and block device files has been added, so that all native linux/unix
  file types can be correctly backed up when using tar transport.
  Special files are all stored as regular files and the type attributes
  are used to remember the original file type.

* All unix file attributes are now saved (and pooled when possible).
  This includes user and group ownership, permissions, and modification
  time.  Smbclient also does a reasonable job of emulating unix 
  permissions (such as mtime), and these attributes get saved too.

* The new default is to not fill incremental dumps.  configure.pl
  automatically sets $Conf{IncrFill} to 0.  The default was 1
  (incrementals were filled with hardlinks).  Since the CGI
  script does filling at browsing time, there is no need to
  fill incremental dumps.

* Backup file names are now stored in "mangled" form. Each node of a
  path is preceded by "f", and special characters (\n, \r, % and /) are
  URI-encoded as "%xx", where xx is the ascii character's hex value. So
  c:/craig/example.txt is now stored as fc/fcraig/fexample.txt. This
  was done mainly so meta-data could be stored alongside the backup
  files without name collisions.  In particular, the attributes for the
  files in a directory are stored in a file called "attrib", and
  mangling avoids file name collisions (I discarded the idea of having
  a duplicate directory tree for every backup just to store the
  attributes). Other meta-data (eg: rsync checksums) could be stored in
  file names preceded by, eg, "c".  There are two other benefits to
  mangling: the share name might contain "/" (eg: "/home/craig" for tar
  transport), and I wanted that represented as a single level in the
  storage tree.  Secondly, as files are written to NewFileList for later
  processing by BackupPC_link, embedded newlines in the file's path
  will cause problems which are avoided by mangling.

  The CGI script undoes the mangling, so it is invisibe to the user.
  Of course, old (unmangled) backups are still supported by the CGI
  interface.

* Various changes to the CGI interface, BackupPC_Admin:

  + Added button that allows users to manually start a full dump in
    addition to the existing incremental dump.

  + Added display of file attributes when browsing backups.

  + Added an optional holdoff time specified by the user when canceling
    a backup. BackupPC will not attempt any new backups for at least the
    specified time. This holdoff time can be changed whether or not a
    backup is running.

  + Added supports for file mangling, and correct merging of unfilled
    backups from mangled or unmangled (and compressed or uncompressed)
    fulls when browsing or restoring.

  + Only displays a "Start Incr Backup" button if there are already some
    backups.

  + For DHCP hosts, when a user tries to manually start a backup, add
    a check for the netbios name of both the host the request came
    from (REMOTE_ADDR) and the last known DHCP address for that host
    to see if either address matches the host. If not, an error
    message is display. The previous behavior was that only requests
    from the client itself succeeded, and requests from other machines
    quietly failed.

* Changed the version numbering to X.Y.Z, instead of X.0Y. This release
  is 1.4.0. The first digit is for major new releases, the middle digit
  is for significant feature releases and improvements, and the last
  digit is for bug fixes. You should think of the old 1.00, 1.01, 1.02
  and 1.03 as 1.0.0, ..., 1.3.0.

* BackupPC and the CGI script BackupPC_Admin now check that the effective
  user id is correct to avoid accidentally launching BackupPC as the
  wrong user or detecting CGI configuration problems.  This behavior
  can be turned off using the $Conf{BackupPCUserVerify} option.

* In numerous places changed "Smb" to "Xfer" (eg: log file names) to
  support generic names for both smb and tar transport methods.  The
  CGI script checks for old names for backward compatibility.

* Major changed to Backup_dump to support new tar transport.  All transport
  specific code moved into BackupPC::Xfer::Smb and BackupPC::Xfer::Tar
  objects.

* Added workaround for a bug in Samba's smbclient for files between 2GB
  and 4GB.  The file size in the tar header is incorrect.  This allows
  files up to 4GB to work with smbclient, rather than 2GB.  To support
  files larger than 2GB you must make sure perl is compiled with the
  uselargefiles option (use "perl -V | egrep largefiles" to check) and
  the pool directory must be on a file system that supports large files.

* Moved the pool writing code into a module BackupPC::PoolWrite.  This
  allows the clever file pool checking (digest, uncompressing, comparing
  etc with minimum disk IO) to be used easily in multiple places (eg: it
  is now used for writing attribute files so they can be pooled).

* Changed MD5 to Digest::MD5 to avoid use of the depreceated MD5 module.

* Shortened default $Conf{MyPath} so that perl's taint mode is more likely
  to be happy.  The old $Conf{MyPath} contained /usr/local/bin, which
  on one user's machine was world writable and perl -T correctly
  complained about it.

* Fixed ping command options in Lib.pm so that it works on OpenBSD.
  Thanks to Kyle Amon for sending the fix.  Decided to move the
  ping options from Lib.pm into config.pl (as $Conf{PingArgs}) and
  now configure.pl tries to come up with a sensible default based on
  the OS.

* Fixed argument checking in BackupPC_tarExtract to allow '$' in the
  share name (eg: C$).  Thanks to Jules Agee for this fix.  Also
  changed the default config.pl so that single quotes are used
  everywhere so that people don't get tripped up putting '$' inside
  double-quoted strings.

#------------------------------------------------------------------------
# Version 1.03, 9 Dec 2001
#------------------------------------------------------------------------

* BackupPC now has full support for compression.  There are now two
  pool areas, the original pool for uncompressed files, and cpool for
  compressed files. The compression is done by Compress::Zlib.
  Compression reduces the pool disk usage by around 40%, although your
  mileage may vary.  Compression is optional and can also be specified on
  a per-PC basis (although this will cost more pool storage since many
  backup files will have to be stored in both compressed and
  uncompressed forms.

* A new script, BackupPC_compressPool, can be run to compress the entire
  pool.  This is used once to migrate all the pool data from uncompressed
  to compressed on existing installations.  Read the documentation
  (Installing BackupPC/Compressing an existing pool) before running
  BackupPC_compressPool!

  Alternatively, compression can simply be turned on and all new backups
  will be compressed. Both old (uncompressed) and new (compressed)
  backups can be browsed and viewed. Eventually, the old backups will
  expire and all the pool data will be compressed.  However, until the
  old backups expire, this approach could require 60% or more additional
  pool storage space to store both uncompressed and compressed versions
  of the backup files.

* Significant improvements to the cgi interface, BackupPC_Admin:

    - much better layout navigation
    - handles compressed backup files and compressed log files
    - handles unfilled incremental dumps
    - better backup directory browsing navigation
    - reports compression statistics
    - $Conf{CgiDateFormatMMDD} allows you to set date format (MM/DD or DD/MM)
    - Additional customization with $Conf{CgiHeaderFontType},
      $Conf{CgiHeaderFontSize}, $Conf{CgiNavBarBgColor}, and
      $Conf{CgiHeaderBgColor}.

* Eliminated BackupPC_queueAll.  BackupPC directly reads the hosts
  file and queues the PCs itself.  Like config.pl, BackupPC will
  re-read the hosts file on each wakeup if its modification time
  changes, or upon a SIGHUP.  This also makes for better behavior
  when adding a host: if you add hosts, simply send a SIGHUP to
  BackupPC or wait for the next wakeup.

* BackupPC_dump now compresses the SmbLOG file if compression is enabled.

* BackupPC_dump keeps track of compressed file sizes so that compression
  statistics can be reported by the cgi interface.

* Aging of old log files now handles compressed log files (.z extension).

* Added configuration option $Conf{IncrFill} to specify whether
  incremental dumps should be filled in.  Old behavior was that
  filling was on.  Now it's optional.  See config.pl for more
  details.

* BackupPC_nightly now cleans and generates statistics for both
  the uncompressed pool and compressed pool (cpool).

* Added new utility script BackupPC_zcat that can be used to
  uncompresses BackupPC files.

* configure.pl offers various options related to compression,
  depending upon whether this is a new install or upgrade,
  and whether or not Compress::Zlib is installed.

* configure.pl now makes a backup copy of config.pl before
  config.pl is updated.

* added three new fields to the backups file to handle optional
  filling and compression stats.

* Added -e option to BackupPC_dump.  BackupPC now invokes BackupPC_dump -e
  on each dhcp host once each night to verify that very old backups are
  expired.  This ensures that very old backups are expired even if
  the dhcp host has not been on the network for a long time.

* fixed bug in BackupPC::FileZIO.pm that required Compress::Zlib,
  even if compression was off.  Thanks to Steve Holmes for reporting
  this.

* fixed bug that caused a BackupPC queue to get blocked when a backup
  cancel attempt was made during the BackupPC_link phase.

#------------------------------------------------------------------------
# Version 1.02, 28 Oct 2001.
#------------------------------------------------------------------------

* Added new script BackupPC_tarExtract to extract the smbclient tar
  archive. This reduces disk writes by perhaps 90-95% and disk reads by
  50%. Previously, tar was used to extract and write everything to disk.
  Then BackupPC_dump would read enough of each file to compute the MD5
  digest, and then compare the full file with candidate pool files.  So
  for each 1MB file that matches a single file in the pool, there would
  be 1MB of disk writes and 2MB of disk reads (to compare two 1MB files).

  BackupPC_tarExtract instead extracts the archive using a 1MB memory
  buffer.  This allows the MD5 digest to be computed without touching the
  disk.  Next, any potential pool file compares are done by comparing the
  pool file against the incoming tar data in memory, which only requires
  the pool file to be read.  So for each 1MB file that matches a single
  file in the pool, there are now no disk writes, and only 1MB of reads.
  BackupPC_tarExtract handles arbitrary size files and repeated
  potential pool matches.  If the incoming file doesn't match the pool
  then it is written to disk (once the pool is mature this happens maybe
  5-10% of the time).

* Substantial changes to BackupPC_dump:

    + BackupPC_tarExtract is now used in place of tar.

    + BackupPC_dump now reads the output from both smbclient and
      BackupPC_tarExtract and merges them into SmbLOG.

    + Named pipes are no longer used to connect smbclient to tar
      (now BackupPC_tarExtract).  Regular pipes are used instead.
      This avoids the need to system mknod or mkfifo.

    + Locked files on the client that can't be read by smbclient
      previously were filled with 0x0 bytes by smbclient, meaning
      tar extracted a useless file filled with 0x0 bytes.  Now,
      BackupPC_dump watches the output of smbclient and removes
      any files that smbclient couldn't read.  This avoids storing
      useless files.  It tries to replace such files with a hard link
      to a previous dump.  These actions appear in the log file.

* added new module lib/BackupPC/FileZIO.pm. This handles pool file
  I/O and is used by BackupPC_tarExtract.  BackupPC::FileIO supports
  reading and writing compressed and regular files and provides all the
  hooks for compression support in BackupPC (should be supported in next
  version). BackupPC::FileIO also does efficient writing of files that
  contain leading 0x0 bytes (by seeking past the 0x0 bytes). This is
  helpful when smbclient reads a locked file, and it fills the tar
  output with a file of the correct size but all 0x0.  Such files will be
  later removed by BackupPC_dump.  But in the meantime, BackupPC::FileIO
  writes such files efficiently (as sparse files), meaning just a few
  blocks of disk space will be needed even if the file is large.

* alive/dead counting for blackout now works correctly for DHCP hosts.

* BackupPC resets activeJob on startup, to fix bug when BackupPC was
  killed and restarted with backups running.

* added extra non blocking select() in BackupPC to make sure the socket
  reads don't block.

* BackupPC avoids queuing multiple BackupPC_queueAll's on the CmdQueue.

* Updated BackupPC_sendEmail to correctly parse the locked file
  error from 2.2.1a smbclient, so that missing Outlook file emails
  can be correctly sent.

* Changed HostInfoRead() in lib/BackupPC/Lib.pm to lowercase the
  hostname read from the hosts file.

* BackupPC_Admin provides general summary when the host name is empty.

* configure.pl (and BackupPC) now requires perl 5.6.0 or later.

* configure.pl complains if BackupPC is already running, reminding you
  to stop it before upgrading.

* updated documentation, and fixed auto-insertion of config.pl into
  BackupPC.pod (previously the last config parameter was left out of
  BackupPC.pod).

#------------------------------------------------------------------------
# Version 1.01, 30 Sep 2001
#------------------------------------------------------------------------

* Documentation cleanup in README, doc/BackupPC.pod, conf/config.pl.

* BackupPC_sendMail now reads the optional per-PC config file, allowing
  email configuration parameters to be set on a per-PC basis.

* Removed the unused 4096-length MD5 digest code in lib/BackupPC/Lib.pm.

#------------------------------------------------------------------------
# Version 1.00, 21 Sep 2001
#------------------------------------------------------------------------

* Initial release of BackupPC on sourceforge.net.