Annotation of /sourceforge.net/trunk/rdesktop/configure

#!/bin/sh
#
# rdesktop: A Remote Desktop Protocol client
# configure script
# Copyright (C) Matthew Chapman 1999-2002
#

echo "rdesktop build configuration script"
echo

echo "# Generated by $0 $*" >Makeconf


# Process command line options

cflags='-DKEYMAP_PATH=\"$(KEYMAP_PATH)\"'
ldflags=''
rpath=

for arg in $*; do
optarg=`echo $arg | sed 's/[-a-z]*=//'`
case $arg in
  --prefix=*)
    echo "prefix      = $optarg" >>Makeconf
    ;;
  --exec-prefix=*)
    echo "exec_prefix = $optarg" >>Makeconf
    ;;
  --bindir=*)
    echo "bindir      = $optarg" >>Makeconf
    ;;
  --mandir=*)
    echo "mandir      = $optarg" >>Makeconf
    ;;
  --sharedir=*)
    echo "datadir     = $optarg" >>Makeconf
    ;;
  --with-x*)
    extraxdir=$optarg
    ;;
  --with-openssl*)
    extrassldir=$optarg
    ;;
  --without-openssl*)
    withoutopenssl=yes
    ;;
  --with-egd-socket=*)
    extraegdpath=$optarg
    ;;
  --with-libvncserver)
    withvncserver=yes
    ;;
  --with-libvncserver-config=*)
    vncserverconfig=$optarg
    ;;
  --with-debug)
    cflags="$cflags -g -DWITH_DEBUG"
    ;;
  --with-debug-kbd)
    cflags="$cflags -g -DWITH_DEBUG_KBD"
    ;;
  --with-debug-rdp5)
    cflags="$cflags -g -DWITH_DEBUG_RDP5"
    ;;
  --with-debug-clipboard)
    cflags="$cflags -g -DWITH_DEBUG_CLIPBOARD"
    ;;
  --without-debug*)
    ;;
  --with-ipv6)
    cflags="$cflags -DIPv6"
    ;;
  *)
    echo "Target directories:"
    echo " --prefix=PREFIX         location for architecture-independent files"
    echo " --exec-prefix=EPREFIX   location for architecture-dependent files"
    echo " --bindir=BINDIR         location for program binaries [EPREFIX/bin]"
    echo " --mandir=MANDIR         location for man pages [PREFIX/man]"
    echo " --sharedir=SHAREDIR     location for architecture-independent shared files [PREFIX/share/rdesktop]"
    echo
    echo "Build configuration:"
    echo " --with-x=DIR            look for X Window System at DIR/include, DIR/lib"
    echo " --with-openssl=DIR      look for OpenSSL at DIR/include, DIR/lib"
    #echo " --without-openssl       use in-tree crypto, even if OpenSSL is available"
    echo " --with-egd-socket=PATH  look for Entropy Gathering Daemon socket at PATH"
    echo " --with-libvncserver     make rdp2vnc"
    echo " --with-libvncserver-config=CMD"
    echo "                         use CMD as libvncserver-config"
    echo " --with-debug            enable protocol debugging output"
    echo " --with-debug-kbd        enable debugging of keyboard handling"
    echo " --with-debug-rdp5       enable debugging of RDP5 code"
    echo " --with-debug-clipboard  enable debugging of clipboard code"
    echo " --with-ipv6             enable support for IPv6"
    echo
    rm -f Makeconf
    exit 1
    ;;
esac
done


# Find compiler

compilers="$CC gcc cc"

for compiler in $compilers; do
    if [ -x "`which $compiler`" ]; then
        cc=$compiler
        break
    fi
done

if [ -z "$cc" ]; then
    echo "ERROR: could not find a C compiler (tried: $compilers)"
    echo "You probably want to install gcc"
    exit 1
fi

echo "CC          = $cc" >>Makeconf

if $cc -v 2>&1 |grep '^gcc' >/dev/null; then
    cflags="$cflags -Wall -O2"
else
    cflags="$cflags -O"
fi


# Find install program

if [ -z "$INSTALL" ]; then
    # Want BSD install
    if [ -x /usr/ucb/installbsd ]; then
        INSTALL=/usr/ucb/installbsd
    elif [ -x /usr/ucb/install ]; then
        INSTALL=/usr/ucb/install
    else
        INSTALL=install
    fi
fi

echo "INSTALL     = $INSTALL" >>Makeconf


# Find X installation

xdirs="$extraxdir /usr/X11R6 /usr/X11 /usr/openwin /usr /usr/local/X11R6 /usr/local/X11 /usr/local"

for dir in $xdirs; do
    if [ -f $dir/include/X11/Xlib.h ]; then
        xdir=$dir
        break
    fi
done

if [ -z "$xdir" ]; then
    echo "ERROR: could not find X Window System headers"
    echo "(searched for include/X11/Xlib.h in: $xdirs)"

    # additional helpful information for Linux users
    if [ -f /etc/redhat-release ]; then
      echo You probably need to install the XFree86-devel package
    elif [ -f /etc/debian_version ]; then
      echo You probably need to install the xlibs-dev package
    fi
    exit 1
fi

echo "X Window System:"
echo "  includes  $xdir/include"
echo "  libraries $xdir/lib"
echo

if [ $xdir != "/usr" ]; then
    cflags="$cflags -I$xdir/include"
    ldflags="$ldflags -L$xdir/lib"
    rpath="$rpath:$xdir/lib"
fi

ldflags="$ldflags"
targets="$targets rdesktop"

#withoutopenssl not currently supported
#if [ -z "$withoutopenssl" ]; then
    # Find OpenSSL installation if available
    ssldirs="$extrassldir /usr/openssl /usr/ssl /usr /usr/local/openssl /usr/local/ssl /usr/local"
    
    for dir in $ssldirs; do
        if [ -f $dir/include/openssl/rc4.h ]; then
            ssldir=$dir
            break
        fi
    done
    
    if [ -z "$ssldir" ]; then
        echo "ERROR: could not find OpenSSL headers"
        echo "(searched for include/openssl/rc4.h in: $ssldirs)"
        # additional helpful information for Linux users
        if [ -f /etc/redhat-release ]; then
            echo You probably need to install the openssl-devel package
        elif [ -f /etc/debian_version ]; then
            echo You probably need to install the libssl-dev package
        fi
        exit 1
    else
        echo "OpenSSL:"
        echo "  includes  $ssldir/include"
        echo "  libraries $ssldir/lib"
        echo
    
        echo "CRYPTOBJ    =" >>Makeconf
    
        if [ $ssldir != "/usr" ]; then
            cflags="$cflags -I$ssldir/include"
            ldflags="$ldflags -L$ssldir/lib"
            rpath="$rpath:$ssldir/lib"
        fi
    
        cflags="$cflags -DWITH_OPENSSL"
        ldflags="$ldflags -lcrypto"
    fi
#fi
    
if [ ! -z "$withvncserver" ]; then
    if [ -z "$vncserverconfig" ]; then
        vncserverconfig=libvncserver-config
    fi

    echo "VNCINC=`$vncserverconfig --cflags`" >> Makeconf
    echo "LDVNC=`$vncserverconfig --libs`" >> Makeconf
    echo "CCLD=`$vncserverconfig --link`" >> Makeconf
    echo >> Makeconf
    targets="$targets rdp2vnc"

    echo "Found libvncserver: Building rdp2vnc"
fi


# Find EGD socket if we don't have /dev/urandom or /dev/random

if [ ! -c /dev/random -a ! -c /dev/urandom ]; then
    egdpaths="$extraegdpath /var/run/egd-pool /dev/egd-pool /etc/egd-pool /etc/entropy"

    for path in $egdpaths; do
        # -e isn't portable, so we use -r
        if [ -r $path ]; then
            egdpath=$path
            break
        fi
    done

    if [ -z "$egdpath" ]; then
        echo "WARNING: could not find /dev/urandom, /dev/random or Entropy Gathering Daemon (EGD) socket"
        echo "(searched: $egdpaths)"
        echo "Session keys may be less secure; installing a system randomness source is recommended."
        echo
    else
        echo "Entropy Gathering Daemon (EGD):"
        echo "  socket    $egdpath"
        echo
        cflags="$cflags -DEGD_SOCKET=\\\"$egdpath\\\""
    fi
fi

# Check for OSS sound support

if [ -f /usr/include/sys/soundcard.h ]; then
    echo Sound support enabled: Open Sound System
    echo
    echo "SOUNDOBJ    = rdpsnd.o rdpsnd_oss.o" >>Makeconf
    cflags="$cflags -DWITH_RDPSND"
elif [ -f /usr/include/sys/audioio.h ]; then
    echo Sound support enabled: Sun/BSD
    echo
    echo "SOUNDOBJ    = rdpsnd.o rdpsnd_sun.o" >>Makeconf
    cflags="$cflags -DWITH_RDPSND"
else
    echo "WARNING: sound support disabled (no /usr/include/sys/soundcard.h or /usr/include/sys/audioio.h)"
    echo "Currently supported systems are Open Sound System and Sun"
    echo
fi


# Platform-specific options

# strip leading colon from rpath
rpath=`echo $rpath |sed 's/^://'`

case `uname -s` in
  SunOS)
    ldflags="$ldflags -lsocket -lnsl -R$rpath"
    ;;
  OSF1)
    ldflags="$ldflags -Wl,-rpath,$rpath"
    ;;
  HP-UX)
    cflags="$cflags -D_XOPEN_SOURCE_EXTENDED"
    ;;
esac


echo "CFLAGS      = $cflags" >>Makeconf
echo "LDFLAGS     = $ldflags" >>Makeconf
echo "TARGETS     = $targets" >>Makeconf

echo "configure complete - now run make"

1	matty	30	#!/bin/sh
2			#
3			# rdesktop: A Remote Desktop Protocol client
4			# configure script
5	matthewc	207	# Copyright (C) Matthew Chapman 1999-2002
6	matty	30	#
7
8	matthewc	202	echo "rdesktop build configuration script"
9			echo
10
11	matty	30	echo "# Generated by $0 $*" >Makeconf
12
13	matthewc	156
14	matthewc	189	# Process command line options
15	matthewc	156
16	matthewc	298	cflags='-DKEYMAP_PATH=\"$(KEYMAP_PATH)\"'
17			ldflags=''
18	matthewc	221	rpath=
19	matthewc	156
20	matty	30	for arg in $*; do
21	matthewc	220	optarg=`echo $arg \| sed 's/[-a-z]*=//'`
22	matty	30	case $arg in
23			--prefix=*)
24	matthewc	156	echo "prefix = $optarg" >>Makeconf
25	matty	30	;;
26			--exec-prefix=*)
27	matthewc	156	echo "exec_prefix = $optarg" >>Makeconf
28	matty	30	;;
29			--bindir=*)
30	matthewc	156	echo "bindir = $optarg" >>Makeconf
31	matty	30	;;
32			--mandir=*)
33	matthewc	156	echo "mandir = $optarg" >>Makeconf
34	matty	30	;;
35	astrand	98	--sharedir=*)
36	matthewc	156	echo "datadir = $optarg" >>Makeconf
37	astrand	98	;;
38	matthewc	220	--with-x*)
39			extraxdir=$optarg
40			;;
41	matty	32	--with-openssl*)
42	matthewc	220	extrassldir=$optarg
43	matty	32	;;
44			--without-openssl*)
45	astrand	267	withoutopenssl=yes
46	matty	32	;;
47	matthewc	220	--with-egd-socket=*)
48			extraegdpath=$optarg
49			;;
50	astrand	333	--with-libvncserver)
51			withvncserver=yes
52			;;
53			--with-libvncserver-config=*)
54			vncserverconfig=$optarg
55			;;
56	astrand	63	--with-debug)
57	matthewc	189	cflags="$cflags -g -DWITH_DEBUG"
58	matty	30	;;
59	astrand	63	--with-debug-kbd)
60	matthewc	189	cflags="$cflags -g -DWITH_DEBUG_KBD"
61	astrand	63	;;
62	forsberg	341	--with-debug-rdp5)
63			cflags="$cflags -g -DWITH_DEBUG_RDP5"
64			;;
65	forsberg	403	--with-debug-clipboard)
66			cflags="$cflags -g -DWITH_DEBUG_CLIPBOARD"
67			;;
68	matty	30	--without-debug*)
69			;;
70	stargo	605	--with-ipv6)
71			cflags="$cflags -DIPv6"
72			;;
73	matty	30	*)
74			echo "Target directories:"
75	matthewc	220	echo " --prefix=PREFIX location for architecture-independent files"
76			echo " --exec-prefix=EPREFIX location for architecture-dependent files"
77			echo " --bindir=BINDIR location for program binaries [EPREFIX/bin]"
78			echo " --mandir=MANDIR location for man pages [PREFIX/man]"
79			echo " --sharedir=SHAREDIR location for architecture-independent shared files [PREFIX/share/rdesktop]"
80	matty	30	echo
81			echo "Build configuration:"
82	matthewc	220	echo " --with-x=DIR look for X Window System at DIR/include, DIR/lib"
83			echo " --with-openssl=DIR look for OpenSSL at DIR/include, DIR/lib"
84	matthewc	523	#echo " --without-openssl use in-tree crypto, even if OpenSSL is available"
85	matthewc	220	echo " --with-egd-socket=PATH look for Entropy Gathering Daemon socket at PATH"
86	astrand	333	echo " --with-libvncserver make rdp2vnc"
87			echo " --with-libvncserver-config=CMD"
88			echo " use CMD as libvncserver-config"
89	matthewc	220	echo " --with-debug enable protocol debugging output"
90			echo " --with-debug-kbd enable debugging of keyboard handling"
91	forsberg	403	echo " --with-debug-rdp5 enable debugging of RDP5 code"
92			echo " --with-debug-clipboard enable debugging of clipboard code"
93	stargo	605	echo " --with-ipv6 enable support for IPv6"
94	matty	30	echo
95			rm -f Makeconf
96			exit 1
97			;;
98			esac
99			done
100
101	matthewc	189
102	matthewc	258	# Find compiler
103
104			compilers="$CC gcc cc"
105
106			for compiler in $compilers; do
107			if [ -x "`which $compiler`" ]; then
108			cc=$compiler
109			break
110			fi
111			done
112
113			if [ -z "$cc" ]; then
114			echo "ERROR: could not find a C compiler (tried: $compilers)"
115			echo "You probably want to install gcc"
116			exit 1
117			fi
118
119			echo "CC = $cc" >>Makeconf
120
121			if $cc -v 2>&1 \|grep '^gcc' >/dev/null; then
122			cflags="$cflags -Wall -O2"
123			else
124			cflags="$cflags -O"
125			fi
126
127
128	matthewc	515	# Find install program
129
130			if [ -z "$INSTALL" ]; then
131			# Want BSD install
132			if [ -x /usr/ucb/installbsd ]; then
133			INSTALL=/usr/ucb/installbsd
134			elif [ -x /usr/ucb/install ]; then
135			INSTALL=/usr/ucb/install
136			else
137			INSTALL=install
138			fi
139			fi
140
141			echo "INSTALL = $INSTALL" >>Makeconf
142
143
144	matthewc	189	# Find X installation
145
146	matthewc	220	xdirs="$extraxdir /usr/X11R6 /usr/X11 /usr/openwin /usr /usr/local/X11R6 /usr/local/X11 /usr/local"
147	matthewc	189
148			for dir in $xdirs; do
149			if [ -f $dir/include/X11/Xlib.h ]; then
150			xdir=$dir
151			break
152			fi
153			done
154
155			if [ -z "$xdir" ]; then
156			echo "ERROR: could not find X Window System headers"
157	matthewc	220	echo "(searched for include/X11/Xlib.h in: $xdirs)"
158	matthewc	189
159			# additional helpful information for Linux users
160	matthewc	451	if [ -f /etc/redhat-release ]; then
161	matthewc	189	echo You probably need to install the XFree86-devel package
162			elif [ -f /etc/debian_version ]; then
163			echo You probably need to install the xlibs-dev package
164			fi
165			exit 1
166			fi
167
168	matthewc	202	echo "X Window System:"
169			echo " includes $xdir/include"
170			echo " libraries $xdir/lib"
171			echo
172
173	matthewc	189	if [ $xdir != "/usr" ]; then
174			cflags="$cflags -I$xdir/include"
175			ldflags="$ldflags -L$xdir/lib"
176	matthewc	221	rpath="$rpath:$xdir/lib"
177	matthewc	189	fi
178
179	astrand	333	ldflags="$ldflags"
180			targets="$targets rdesktop"
181	matthewc	189
182	matthewc	523	#withoutopenssl not currently supported
183			#if [ -z "$withoutopenssl" ]; then
184	astrand	267	# Find OpenSSL installation if available
185			ssldirs="$extrassldir /usr/openssl /usr/ssl /usr /usr/local/openssl /usr/local/ssl /usr/local"
186
187			for dir in $ssldirs; do
188			if [ -f $dir/include/openssl/rc4.h ]; then
189			ssldir=$dir
190			break
191			fi
192			done
193
194			if [ -z "$ssldir" ]; then
195	matthewc	523	echo "ERROR: could not find OpenSSL headers"
196			echo "(searched for include/openssl/rc4.h in: $ssldirs)"
197			# additional helpful information for Linux users
198			if [ -f /etc/redhat-release ]; then
199			echo You probably need to install the openssl-devel package
200			elif [ -f /etc/debian_version ]; then
201			echo You probably need to install the libssl-dev package
202			fi
203			exit 1
204	astrand	267	else
205			echo "OpenSSL:"
206			echo " includes $ssldir/include"
207			echo " libraries $ssldir/lib"
208			echo
209
210			echo "CRYPTOBJ =" >>Makeconf
211
212			if [ $ssldir != "/usr" ]; then
213			cflags="$cflags -I$ssldir/include"
214			ldflags="$ldflags -L$ssldir/lib"
215			rpath="$rpath:$ssldir/lib"
216			fi
217
218			cflags="$cflags -DWITH_OPENSSL"
219			ldflags="$ldflags -lcrypto"
220	matthewc	189	fi
221	matthewc	523	#fi
222	astrand	267
223	astrand	333	if [ ! -z "$withvncserver" ]; then
224			if [ -z "$vncserverconfig" ]; then
225			vncserverconfig=libvncserver-config
226			fi
227	matthewc	189
228	astrand	333	echo "VNCINC=`$vncserverconfig --cflags`" >> Makeconf
229			echo "LDVNC=`$vncserverconfig --libs`" >> Makeconf
230			echo "CCLD=`$vncserverconfig --link`" >> Makeconf
231			echo >> Makeconf
232			targets="$targets rdp2vnc"
233
234			echo "Found libvncserver: Building rdp2vnc"
235			fi
236
237
238	matthewc	220	# Find EGD socket if we don't have /dev/urandom or /dev/random
239	matthewc	221
240	matthewc	220	if [ ! -c /dev/random -a ! -c /dev/urandom ]; then
241			egdpaths="$extraegdpath /var/run/egd-pool /dev/egd-pool /etc/egd-pool /etc/entropy"
242
243			for path in $egdpaths; do
244			# -e isn't portable, so we use -r
245			if [ -r $path ]; then
246			egdpath=$path
247			break
248			fi
249			done
250
251			if [ -z "$egdpath" ]; then
252			echo "WARNING: could not find /dev/urandom, /dev/random or Entropy Gathering Daemon (EGD) socket"
253			echo "(searched: $egdpaths)"
254			echo "Session keys may be less secure; installing a system randomness source is recommended."
255			echo
256			else
257			echo "Entropy Gathering Daemon (EGD):"
258			echo " socket $egdpath"
259			echo
260			cflags="$cflags -DEGD_SOCKET=\\\"$egdpath\\\""
261			fi
262			fi
263
264	matthewc	474	# Check for OSS sound support
265	matthewc	221
266	matthewc	474	if [ -f /usr/include/sys/soundcard.h ]; then
267			echo Sound support enabled: Open Sound System
268			echo
269			echo "SOUNDOBJ = rdpsnd.o rdpsnd_oss.o" >>Makeconf
270			cflags="$cflags -DWITH_RDPSND"
271	matthewc	477	elif [ -f /usr/include/sys/audioio.h ]; then
272	stargo	560	echo Sound support enabled: Sun/BSD
273	matthewc	476	echo
274			echo "SOUNDOBJ = rdpsnd.o rdpsnd_sun.o" >>Makeconf
275			cflags="$cflags -DWITH_RDPSND"
276	matthewc	474	else
277	stargo	603	echo "WARNING: sound support disabled (no /usr/include/sys/soundcard.h or /usr/include/sys/audioio.h)"
278	matthewc	476	echo "Currently supported systems are Open Sound System and Sun"
279	matthewc	474	echo
280			fi
281
282
283	matthewc	221	# Platform-specific options
284
285			# strip leading colon from rpath
286			rpath=`echo $rpath \|sed 's/^://'`
287
288			case `uname -s` in
289			SunOS)
290			ldflags="$ldflags -lsocket -lnsl -R$rpath"
291			;;
292			OSF1)
293			ldflags="$ldflags -Wl,-rpath,$rpath"
294			;;
295	matthewc	536	HP-UX)
296			cflags="$cflags -D_XOPEN_SOURCE_EXTENDED"
297			;;
298	matthewc	221	esac
299
300
301	matthewc	298	echo "CFLAGS = $cflags" >>Makeconf
302			echo "LDFLAGS = $ldflags" >>Makeconf
303	astrand	333	echo "TARGETS = $targets" >>Makeconf
304	matthewc	189
305	matty	30	echo "configure complete - now run make"
306	matthewc	221