/[mdap]/README
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Contents of /README

Parent Directory Parent Directory | Revision Log Revision Log


Revision 42 - (show annotations)
Fri Nov 16 13:04:56 2007 UTC (16 years, 4 months ago) by dpavlin
File size: 1017 byte(s)
 r46@brr:  dpavlin | 2007-11-16 14:04:52 +0100
 setup network on eth1, 10.0.0.0/8

1 Small experimental setup to enable MDAP update of ants (MDAP capable devices)
2
3 Written by Dobrica Pavlinusic <dpavlin@rot13.org>
4
5 Your CPE firmware images goes to /srv/tftp/
6
7 ^^ Setup upsing stand-alone services
8
9 Install udhcpd and tftpd-hpa and run network-setup.sh script to start all required services.
10
11 ^^ Setup using inetd
12
13 Install tftpd and dhcpd, this setup is depriciated, but still useful
14
15 ^ setup tftp /etc/inetd.conf
16
17 tftp dgram udp wait nobody /usr/sbin/tcpd /usr/sbin/in.tftpd /srv/tftp
18
19 ^ setup dhcpd /etc/dhcpd.conf
20
21 option subnet-mask 255.255.255.0;
22 default-lease-time 300;
23 max-lease-time 600;
24 dynamic-bootp-lease-length 300;
25
26 authoritative;
27 allow bootp;
28
29 subnet 192.168.1.0 netmask 255.255.255.0 {
30 range dynamic-bootp 192.168.1.101 192.168.1.250;
31 }
32
33 Special care should be taken with dhcpd server. It complains about unknown IP classes and doesn't
34 start. Also, there is intentional very small limit on IP lease time which should plenty enough
35 for ants to reflash because it takes ~ 3 min at most.
36

  ViewVC Help
Powered by ViewVC 1.1.26