/[mdap]/README
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Contents of /README

Parent Directory Parent Directory | Revision Log Revision Log


Revision 54 - (show annotations)
Fri Nov 16 17:45:22 2007 UTC (11 years, 4 months ago) by dpavlin
File size: 1238 byte(s)
 r68@brr:  dpavlin | 2007-11-16 18:45:16 +0100
 move tweaks of addressing

1 Small experimental setup to enable MDAP update of ants (MDAP capable devices)
2
3 Written by Dobrica Pavlinusic <dpavlin@rot13.org>
4
5 Your CPE firmware images goes to /srv/tftp/
6
7 This documents assumes that you want following network configuration:
8
9 eth0 192.168.1.0 255.255.255.0 internet connection
10 eth1 10.0.0.100 10.255.255.255 CPEs are connected to this interface
11
12 ^^ Setup upsing stand-alone services
13
14 Install udhcpd and tftpd-hpa and run network-setup.sh script to start all required services.
15
16 ^^ Setup using inetd
17
18 Install tftpd and dhcpd, this setup is depriciated, but still useful
19
20 ^ setup tftp /etc/inetd.conf
21
22 tftp dgram udp wait nobody /usr/sbin/tcpd /usr/sbin/in.tftpd /srv/tftp
23
24 ^ setup dhcpd /etc/dhcpd.conf
25
26 option subnet-mask 255.0.0.0;
27 default-lease-time 300;
28 max-lease-time 600;
29 dynamic-bootp-lease-length 300;
30
31 authoritative;
32 allow bootp;
33
34 subnet 192.168.1.0 netmask 255.255.255.0 {
35 }
36
37 subnet 10.0.0.0 netmask 255.0.0.0 {
38 range dynamic-bootp 10.0.1.1 10.0.1.254;
39 }
40
41
42 Special care should be taken with dhcpd server. It complains about unknown IP classes and doesn't
43 start. Also, there is intentional very small limit on IP lease time which should plenty enough
44 for ants to reflash because it takes ~ 3 min at most.
45

  ViewVC Help
Powered by ViewVC 1.1.26