/[mdap]/README
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Annotation of /README

Parent Directory Parent Directory | Revision Log Revision Log


Revision 42 - (hide annotations)
Fri Nov 16 13:04:56 2007 UTC (13 years ago) by dpavlin
File size: 1017 byte(s)
 r46@brr:  dpavlin | 2007-11-16 14:04:52 +0100
 setup network on eth1, 10.0.0.0/8

1 dpavlin 35 Small experimental setup to enable MDAP update of ants (MDAP capable devices)
2    
3     Written by Dobrica Pavlinusic <dpavlin@rot13.org>
4    
5 dpavlin 42 Your CPE firmware images goes to /srv/tftp/
6    
7     ^^ Setup upsing stand-alone services
8    
9     Install udhcpd and tftpd-hpa and run network-setup.sh script to start all required services.
10    
11     ^^ Setup using inetd
12    
13     Install tftpd and dhcpd, this setup is depriciated, but still useful
14    
15 dpavlin 35 ^ setup tftp /etc/inetd.conf
16    
17     tftp dgram udp wait nobody /usr/sbin/tcpd /usr/sbin/in.tftpd /srv/tftp
18    
19     ^ setup dhcpd /etc/dhcpd.conf
20    
21     option subnet-mask 255.255.255.0;
22     default-lease-time 300;
23     max-lease-time 600;
24     dynamic-bootp-lease-length 300;
25    
26     authoritative;
27     allow bootp;
28    
29     subnet 192.168.1.0 netmask 255.255.255.0 {
30     range dynamic-bootp 192.168.1.101 192.168.1.250;
31     }
32    
33     Special care should be taken with dhcpd server. It complains about unknown IP classes and doesn't
34     start. Also, there is intentional very small limit on IP lease time which should plenty enough
35     for ants to reflash because it takes ~ 3 min at most.
36 dpavlin 42

  ViewVC Help
Powered by ViewVC 1.1.26