src/include/tulipreg.h

/*  GXemul: $Id: tulipreg.h,v 1.3 2005/10/27 14:01:15 debug Exp $  */
/*  $NetBSD: tulipreg.h,v 1.31 2005/06/23 23:51:42 rpaulo Exp $  */

#ifndef __volatile
#define __volatile
#endif

/*-
 * Copyright (c) 1999, 2000 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
 * NASA Ames Research Center.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by the NetBSD
 *      Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _DEV_IC_TULIPREG_H_
#define _DEV_IC_TULIPREG_H_

/*
 * Register description for the Digital Semiconductor ``Tulip'' (21x4x)
 * Ethernet controller family, and a variety of clone chips, including:
 *
 *      - Macronix 98713, 98713A, 98715, 98715A, 98725 (PMAC):
 *
 *        These chips are fairly straight-forward Tulip clones.
 *        The 98713 is a very close 21140A clone.  It has GPR
 *        and MII media, and a GPIO facility, and uses the ISV
 *        SROM format (or, at least, should, because of the GPIO
 *        facility).  The 98713A has MII, no GPIO facility, and
 *        an internal NWay block.  The 98715, 98715A, and 98725
 *        have only GPR media and the NWay block.  The 98715,
 *        98715A, and 98725 support power management.
 *
 *        The 98715AEC adds 802.3x flow Frame based Flow Control to the
 *        98715A.
 *
 *      - Lite-On 82C115 (PNIC II):
 *
 *        A clone of the Macronix MX98725, with the following differences:
 *
 *              - Wake-On-LAN support
 *              - 128-bit multicast hash table rather than the
 *                standard 512-bit hash table
 *              - 802.3x flow control
 *
 *      - Lite-On 82C168, 82C169 (PNIC):
 *
 *        Pretty close, with only a few minor differences:
 *
 *              - EEPROM is accessed completely differently.
 *              - MII is accessed completely differently.
 *              - No SIO facility (due to the above two differences).
 *              - GPIO interface is different than the 21140's.
 *              - Boards that lack PHYs use the internal NWay block
 *                and transceiver.
 *
 *      - Winbond 89C840F
 *
 *        Less similar, but still roughly compatible (enough so
 *        that the driver can be adapted, at least):
 *
 *              - Registers lack the pad word between them.
 *              - Instead of a setup frame, there are two station
 *                address registers and two multicast hash table
 *                registers (64-bit multicast hash table).
 *              - Only supported media interface is MII-over-SIO.
 *              - Different OPMODE register bits for various things
 *                (mostly media related).
 *
 *      - ADMtek AL981
 *
 *        Another pretty-close clone:
 *
 *              - Wake-On-LAN support
 *              - Instead of a setup frame, there are two station
 *                address registers and two multicast hash table
 *                registers (64-bit multicast hash table).
 *              - 802.3x flow control
 *              - Only supported media interface is built-in PHY
 *                which is accessed through a set of special registers.
 *              - Not all registers have the pad word between them,
 *                but luckily, there are all AL981-specific registers,
 *                so this is easy to deal with.
 *
 *      - ADMtek AN983 and AN985
 *
 *        Similar to the ADMtek AL981, but with a few differences.
 *
 *      - Xircom X3201-3
 *
 *        CardBus 21143 clone, with a few differences:
 *
 *              - No MicroWire SROM; Ethernet address must come
 *                from CIS.
 *              - Transmit buffers must also be 32-bit aligned.
 *              - The BUSMODE_SWR bit is not self-clearing.
 *              - Must include FS|LS in setup packet descriptor.
 *              - SIA is not 21143-like, and all media attachments
 *                are MII-on-SIO.
 *
 *      - Davicom DM9102 and DM9102A
 *
 *        Pretty similar to the 21140A, with a few differences:
 *
 *              - Wake-On-LAN support
 *              - DM9102 has built-in 10/100 PHY on MII interface.
 *              - DM9102A has built-in 10/100 PHY on MII interface,
 *                as well as a HomePNA 1 PHY on an alternate MII
 *                interface (selected by clearing OPMODE_PS).
 *              - The chip has a bug in the transmit DMA logic,
 *                requiring that the packet be comprised of only
 *                one DMA segment.
 *              - The bus interface is buggy, and the BUSMODE register
 *                must be initialized to 0.
 *              - There seems to be an interrupt logic bug, requiring
 *                that interrupts be disabled on the chip during the
 *                interrupt handler.
 *      
 *      - ASIX AX88140
 *      
 *        21433 clone with a few differences:
 *
 *              - Specific broadcast bit in the OPMODE register.
 *              - Transmit buffer must be 32-bit aligned.
 *              - The BUSMODE_SWR bit is not self-clearing.
 *              - External 10BaseT PHY or 10/100 MII.
 *
 * Some of the clone chips have different registers, and some have
 * different bits in the same registers. These will be denoted by
 * PMAC, PNICII, PNIC, DM, WINB, ADM and AX in the register/bit names.
 */

/*
 * Tulip buffer descriptor.  Must be 4-byte aligned.
 *
 * Note for receive descriptors, the byte count fields must
 * be a multiple of 4.
 */
struct tulip_desc {
        __volatile u_int32_t td_status;   /* Status */
        __volatile u_int32_t td_ctl;      /* Control and Byte Counts */
        __volatile u_int32_t td_bufaddr1; /* Buffer Address 1 */
        __volatile u_int32_t td_bufaddr2; /* Buffer Address 2 */
};

/*
 * Descriptor Status bits common to transmit and receive.
 */
#define TDSTAT_OWN      0x80000000      /* Tulip owns descriptor */
#define TDSTAT_ES       0x00008000      /* Error Summary */

/*
 * Descriptor Status bits for Receive Descriptor.
 */
#define TDSTAT_Rx_FF    0x40000000      /* Filtering Fail */
#define TDSTAT_WINB_Rx_RCMP 0x40000000  /* Receive Complete */
#define TDSTAT_Rx_FL    0x3fff0000      /* Frame Length including CRC */
#define TDSTAT_Rx_DE    0x00004000      /* Descriptor Error */
#define TDSTAT_Rx_DT    0x00003000      /* Data Type */
#define TDSTAT_Rx_RF    0x00000800      /* Runt Frame */
#define TDSTAT_Rx_MF    0x00000400      /* Multicast Frame */
#define TDSTAT_Rx_FS    0x00000200      /* First Descriptor */
#define TDSTAT_Rx_LS    0x00000100      /* Last Descriptor */
#define TDSTAT_Rx_TL    0x00000080      /* Frame Too Long */
#define TDSTAT_Rx_CS    0x00000040      /* Collision Seen */
#define TDSTAT_Rx_RT    0x00000020      /* Frame Type */
#define TDSTAT_Rx_RW    0x00000010      /* Receive Watchdog */
#define TDSTAT_Rx_RE    0x00000008      /* Report on MII Error */
#define TDSTAT_Rx_DB    0x00000004      /* Dribbling Bit */
#define TDSTAT_Rx_CE    0x00000002      /* CRC Error */
#define TDSTAT_Rx_ZER   0x00000001      /* Zero (always 0) */

#define TDSTAT_Rx_LENGTH(x)     (((x) & TDSTAT_Rx_FL) >> 16)

#define TDSTAT_Rx_DT_SR 0x00000000      /* Serial Received Frame */
#define TDSTAT_Rx_DT_IL 0x00001000      /* Internal Loopback Frame */
#define TDSTAT_Rx_DT_EL 0x00002000      /* External Loopback Frame */
#define TDSTAT_Rx_DT_r  0x00003000      /* Reserved */

/*
 * Descriptor Status bits for Transmit Descriptor.
 */
#define TDSTAT_WINB_Tx_TE 0x00008000    /* Transmit Error */
#define TDSTAT_Tx_TO    0x00004000      /* Transmit Jabber Timeout */
#define TDSTAT_Tx_LO    0x00000800      /* Loss of Carrier */
#define TDSTAT_Tx_NC    0x00000400      /* No Carrier */
#define TDSTAT_Tx_LC    0x00000200      /* Late Collision */
#define TDSTAT_Tx_EC    0x00000100      /* Excessive Collisions */
#define TDSTAT_Tx_HF    0x00000080      /* Heartbeat Fail */
#define TDSTAT_Tx_CC    0x00000078      /* Collision Count */
#define TDSTAT_Tx_LF    0x00000004      /* Link Fail */
#define TDSTAT_Tx_UF    0x00000002      /* Underflow Error */
#define TDSTAT_Tx_DE    0x00000001      /* Deferred */

#define TDSTAT_Tx_COLLISIONS(x) (((x) & TDSTAT_Tx_CC) >> 3)

/*
 * Descriptor Control bits common to transmit and receive.
 */
#define TDCTL_SIZE1     0x000007ff      /* Size of buffer 1 */
#define TDCTL_SIZE1_SHIFT 0

#define TDCTL_SIZE2     0x003ff800      /* Size of buffer 2 */
#define TDCTL_SIZE2_SHIFT 11

#define TDCTL_ER        0x02000000      /* End of Ring */
#define TDCTL_CH        0x01000000      /* Second Address Chained */

/*
 * Descriptor Control bits for Transmit Descriptor.
 */
#define TDCTL_Tx_IC     0x80000000      /* Interrupt on Completion */
#define TDCTL_Tx_LS     0x40000000      /* Last Segment */
#define TDCTL_Tx_FS     0x20000000      /* First Segment */
#define TDCTL_Tx_FT1    0x10000000      /* Filtering Type 1 */
#define TDCTL_Tx_SET    0x08000000      /* Setup Packet */
#define TDCTL_Tx_AC     0x04000000      /* Add CRC Disable */
#define TDCTL_Tx_DPD    0x00800000      /* Disabled Padding */
#define TDCTL_Tx_FT0    0x00400000      /* Filtering Type 0 */

/*
 * The Tulip filter is programmed by "transmitting" a Setup Packet
 * (indicated by TDCTL_Tx_SET).  The filtering type is indicated
 * as follows:
 *
 *      FT1     FT0     Description
 *      ---     ---     -----------
 *      0       0       Perfect Filtering: The Tulip interprets the
 *                      descriptor buffer as a table of 16 MAC addresses
 *                      that the Tulip should receive.
 *
 *      0       1       Hash Filtering: The Tulip interprets the
 *                      descriptor buffer as a 512-bit hash table
 *                      plus one perfect address.  If the incoming
 *                      address is Multicast, the hash table filters
 *                      the address, else the address is filtered by
 *                      the perfect address.
 *
 *      1       0       Inverse Filtering: Like Perfect Filtering, except
 *                      the table is addresses that the Tulip does NOT
 *                      receive.
 *
 *      1       1       Hash-only Filtering: Like Hash Filtering, but
 *                      physical addresses are matched by the hash table
 *                      as well, and not by matching a single perfect
 *                      address.
 *
 * A Setup Packet must always be 192 bytes long.  The Tulip can store
 * 16 MAC addresses.  If not all 16 are specified in Perfect Filtering
 * or Inverse Filtering mode,  then unused entries should duplicate
 * one of the valid entries.
 */
#define TDCTL_Tx_FT_PERFECT     0
#define TDCTL_Tx_FT_HASH        TDCTL_Tx_FT0
#define TDCTL_Tx_FT_INVERSE     TDCTL_Tx_FT1
#define TDCTL_Tx_FT_HASHONLY    (TDCTL_Tx_FT1|TDCTL_Tx_FT0)

#define TULIP_SETUP_PACKET_LEN  192
#define TULIP_MAXADDRS          16
#define TULIP_MCHASHSIZE        512
#define TULIP_PNICII_HASHSIZE   128

/*
 * Maximum size of a Tulip Ethernet Address ROM or SROM.
 */
#define TULIP_ROM_SIZE(bits)    (2 << (bits))
#define TULIP_MAX_ROM_SIZE      512

/*
 * Format of the standard Tulip SROM information:
 *
 *      Byte offset     Size    Usage
 *      0               18      reserved
 *      18              1       SROM Format Version
 *      19              1       Chip Count
 *      20              6       IEEE Network Address
 *      26              1       Chip 0 Device Number
 *      27              2       Chip 0 Info Leaf Offset
 *      29              1       Chip 1 Device Number
 *      30              2       Chip 1 Info Leaf Offset
 *      32              1       Chip 2 Device Number
 *      33              2       Chip 2 Info Leaf Offset
 *      ...             1       Chip n Device Number
 *      ...             2       Chip n Info Leaf Offset
 *      ...             ...     ...
 *      Chip Info Leaf Information
 *      ...
 *      ...
 *      ...
 *      126             2       CRC32 checksum
 */
#define TULIP_ROM_SROM_FORMAT_VERION            18              /* B */
#define TULIP_ROM_CHIP_COUNT                    19              /* B */
#define TULIP_ROM_IEEE_NETWORK_ADDRESS          20
#define TULIP_ROM_CHIPn_DEVICE_NUMBER(n)        (26 + ((n) * 3))/* B */
#define TULIP_ROM_CHIPn_INFO_LEAF_OFFSET(n)     (27 + ((n) * 3))/* W */
#define TULIP_ROM_CRC32_CHECKSUM                126             /* W */
#define TULIP_ROM_CRC32_CHECKSUM1               94              /* W */

#define TULIP_ROM_IL_SELECT_CONN_TYPE           0               /* W */
#define TULIP_ROM_IL_MEDIA_COUNT                2               /* B */
#define TULIP_ROM_IL_MEDIAn_BLOCK_BASE          3

#define SELECT_CONN_TYPE_TP             0x0000
#define SELECT_CONN_TYPE_BNC            0x0001
#define SELECT_CONN_TYPE_AUI            0x0002
#define SELECT_CONN_TYPE_100TX          0x0003
#define SELECT_CONN_TYPE_100T4          0x0006
#define SELECT_CONN_TYPE_100FX          0x0007
#define SELECT_CONN_TYPE MII_10T        0x0009
#define SELECT_CONN_TYPE_MII_100TX      0x000d
#define SELECT_CONN_TYPE_MII_100T4      0x000f
#define SELECT_CONN_TYPE_MII_100FX      0x0010
#define SELECT_CONN_TYPE_TP_AUTONEG     0x0100
#define SELECT_CONN_TYPE_TP_FDX         0x0204
#define SELECT_CONN_TYPE_MII_10T_FDX    0x020a
#define SELECT_CONN_TYPE_100TX_FDX      0x020e
#define SELECT_CONN_TYPE_MII_100TX_FDX  0x0211
#define SELECT_CONN_TYPE_TP_NOLINKPASS  0x0400
#define SELECT_CONN_TYPE_ASENSE         0x0800
#define SELECT_CONN_TYPE_ASENSE_POWERUP 0x8800
#define SELECT_CONN_TYPE_ASENSE_AUTONEG 0x0900

#define TULIP_ROM_MB_MEDIA_CODE         0x3f
#define TULIP_ROM_MB_MEDIA_TP           0x00
#define TULIP_ROM_MB_MEDIA_BNC          0x01
#define TULIP_ROM_MB_MEDIA_AUI          0x02
#define TULIP_ROM_MB_MEDIA_100TX        0x03
#define TULIP_ROM_MB_MEDIA_TP_FDX       0x04
#define TULIP_ROM_MB_MEDIA_100TX_FDX    0x05
#define TULIP_ROM_MB_MEDIA_100T4        0x06
#define TULIP_ROM_MB_MEDIA_100FX        0x07
#define TULIP_ROM_MB_MEDIA_100FX_FDX    0x08

#define TULIP_ROM_MB_EXT                0x40

#define TULIP_ROM_MB_CSR13              1                       /* W */
#define TULIP_ROM_MB_CSR14              3                       /* W */
#define TULIP_ROM_MB_CSR15              5                       /* W */

#define TULIP_ROM_MB_SIZE(mc)           (((mc) & TULIP_ROM_MB_EXT) ? 7 : 1)

#define TULIP_ROM_MB_NOINDICATOR        0x8000
#define TULIP_ROM_MB_DEFAULT            0x4000
#define TULIP_ROM_MB_POLARITY           0x0080
#define TULIP_ROM_MB_OPMODE(x)          (((x) & 0x71) << 18)
#define TULIP_ROM_MB_BITPOS(x)          (1 << (((x) & 0x0e) >> 1))

#define TULIP_ROM_MB_21140_GPR          0       /* 21140[A] GPR block */
#define TULIP_ROM_MB_21140_MII          1       /* 21140[A] MII block */
#define TULIP_ROM_MB_21142_SIA          2       /* 2114[23] SIA block */
#define TULIP_ROM_MB_21142_MII          3       /* 2114[23] MII block */
#define TULIP_ROM_MB_21143_SYM          4       /* 21143 SYM block */
#define TULIP_ROM_MB_21143_RESET        5       /* 21143 reset block */

#define TULIP_ROM_GETW(data, off) ((uint32_t)(data)[(off)] |            \
                                   (uint32_t)((data)[(off) + 1]) << 8)

/*
 * Tulip control registers.
 */

#define TULIP_CSR0      0x00
#define TULIP_CSR1      0x08
#define TULIP_CSR2      0x10
#define TULIP_CSR3      0x18
#define TULIP_CSR4      0x20
#define TULIP_CSR5      0x28
#define TULIP_CSR6      0x30
#define TULIP_CSR7      0x38
#define TULIP_CSR8      0x40
#define TULIP_CSR9      0x48
#define TULIP_CSR10     0x50
#define TULIP_CSR11     0x58
#define TULIP_CSR12     0x60
#define TULIP_CSR13     0x68
#define TULIP_CSR14     0x70
#define TULIP_CSR15     0x78
#define TULIP_CSR16     0x80
#define TULIP_CSR17     0x88
#define TULIP_CSR18     0x90
#define TULIP_CSR19     0x98
#define TULIP_CSR20     0xa0
#define TULIP_CSR21     0xa8
#define TULIP_CSR22     0xb0
#define TULIP_CSR23     0xb8
#define TULIP_CSR24     0xc0
#define TULIP_CSR25     0xc8
#define TULIP_CSR26     0xd0
#define TULIP_CSR27     0xd8
#define TULIP_CSR28     0xe0
#define TULIP_CSR29     0xe8
#define TULIP_CSR30     0xf0
#define TULIP_CSR31     0xf8

#define TULIP_CSR_INDEX(csr)    ((csr) >> 3)

/* CSR0 - Bus Mode */
#define CSR_BUSMODE             TULIP_CSR0
#define BUSMODE_SWR             0x00000001      /* software reset */
#define BUSMODE_BAR             0x00000002      /* bus arbitration */
#define BUSMODE_DSL             0x0000007c      /* descriptor skip length */
#define BUSMODE_BLE             0x00000080      /* big endian */
                                                /* programmable burst length */
#define BUSMODE_PBL_DEFAULT     0x00000000      /*     default value */
#define BUSMODE_PBL_1LW         0x00000100      /*     1 longword */
#define BUSMODE_PBL_2LW         0x00000200      /*     2 longwords */
#define BUSMODE_PBL_4LW         0x00000400      /*     4 longwords */
#define BUSMODE_PBL_8LW         0x00000800      /*     8 longwords */
#define BUSMODE_PBL_16LW        0x00001000      /*    16 longwords */
#define BUSMODE_PBL_32LW        0x00002000      /*    32 longwords */
                                                /* cache alignment */
#define BUSMODE_CAL_NONE        0x00000000      /*     no alignment */
#define BUSMODE_CAL_8LW         0x00004000      /*     8 longwords */
#define BUSMODE_CAL_16LW        0x00008000      /*    16 longwords */
#define BUSMODE_CAL_32LW        0x0000c000      /*    32 longwords */
#define BUSMODE_DAS             0x00010000      /* diagnostic address space */
                                                /*   must be zero on most */
                                                /* transmit auto-poll */
                /*
                 * Transmit auto-polling not supported on:
                 *      Winbond 89C040F
                 *      Xircom X3201-3
                 *      Davicom DM9102 (buggy BUSMODE register)
                 *      ASIX AX88140
                 */
#define BUSMODE_TAP_NONE        0x00000000      /*     no auto-polling */
#define BUSMODE_TAP_200us       0x00020000      /*   200 uS */
#define BUSMODE_TAP_800us       0x00040000      /*   400 uS */
#define BUSMODE_TAP_1_6ms       0x00060000      /*   1.6 mS */
#define BUSMODE_TAP_12_8us      0x00080000      /*  12.8 uS (21041+) */
#define BUSMODE_TAP_25_6us      0x000a0000      /*  25.6 uS (21041+) */
#define BUSMODE_TAP_51_2us      0x000c0000      /*  51.2 uS (21041+) */
#define BUSMODE_TAP_102_4us     0x000e0000      /* 102.4 uS (21041+) */
#define BUSMODE_DBO             0x00100000      /* desc-only b/e (21041+) */
#define BUSMODE_RME             0x00200000      /* rd/mult enab (21140+) */
#define BUSMODE_WINB_WAIT       0x00200000      /* wait state insertion */
#define BUSMODE_RLE             0x00800000      /* rd/line enab (21140+) */
#define BUSMODE_WLE             0x01000000      /* wt/line enab (21140+) */
#define BUSMODE_PNIC_MBO        0x04000000      /* magic `must be one' bit */
                                                /*    on Lite-On PNIC */


/* CSR1 - Transmit Poll Demand */
#define CSR_TXPOLL              TULIP_CSR1
#define TXPOLL_TPD              0x00000001      /* transmit poll demand */


/* CSR2 - Receive Poll Demand */
#define CSR_RXPOLL              TULIP_CSR2
#define RXPOLL_RPD              0x00000001      /* receive poll demand */


/* CSR3 - Receive List Base Address */
#define CSR_RXLIST              TULIP_CSR3

/* CSR4 - Transmit List Base Address */
#define CSR_TXLIST              TULIP_CSR4

/* CSR5 - Status */
#define CSR_STATUS              TULIP_CSR5
#define STATUS_TI               0x00000001      /* transmit interrupt */
#define STATUS_TPS              0x00000002      /* transmit process stopped */
#define STATUS_TU               0x00000004      /* transmit buffer unavail */
#define STATUS_TJT              0x00000008      /* transmit jabber timeout */
#define STATUS_WINB_REI         0x00000008      /* receive early interrupt */
#define STATUS_LNPANC           0x00000010      /* link pass (21041) */
#define STATUS_WINB_RERR        0x00000010      /* receive error */
#define STATUS_UNF              0x00000020      /* transmit underflow */
#define STATUS_RI               0x00000040      /* receive interrupt */
#define STATUS_RU               0x00000080      /* receive buffer unavail */
#define STATUS_RPS              0x00000100      /* receive process stopped */
#define STATUS_RWT              0x00000200      /* receive watchdog timeout */
#define STATUS_AT               0x00000400      /* SIA AUI/TP pin changed
                                                   (21040) */
#define STATUS_ETI              0x00000400      /* early transmit interrupt
                                                   (21142/PMAC/Winbond) */
#define STATUS_FD               0x00000800      /* full duplex short frame
                                                   received (21040) */
#define STATUS_TM               0x00000800      /* timer expired (21041) */
#define STATUS_LNF              0x00001000      /* link fail (21040) */
#define STATUS_SE               0x00002000      /* system error */
#define STATUS_ER               0x00004000      /* early receive (21041) */
#define STATUS_AIS              0x00008000      /* abnormal interrupt summary */
#define STATUS_NIS              0x00010000      /* normal interrupt summary */
#define STATUS_RS               0x000e0000      /* receive process state */
#define STATUS_RS_STOPPED       0x00000000      /* Stopped */
#define STATUS_RS_FETCH         0x00020000      /* Running - fetch receive
                                                   descriptor */
#define STATUS_RS_CHECK         0x00040000      /* Running - check for end
                                                   of receive */
#define STATUS_RS_WAIT          0x00060000      /* Running - wait for packet */
#define STATUS_RS_SUSPENDED     0x00080000      /* Suspended */
#define STATUS_RS_CLOSE         0x000a0000      /* Running - close receive
                                                   descriptor */
#define STATUS_RS_FLUSH         0x000c0000      /* Running - flush current
                                                   frame from FIFO */
#define STATUS_RS_QUEUE         0x000e0000      /* Running - queue current
                                                   frame from FIFO into
                                                   buffer */
#define STATUS_DM_RS_STOPPED    0x00000000      /* Stopped */
#define STATUS_DM_RS_FETCH      0x00020000      /* Running - fetch receive
                                                   descriptor */
#define STATUS_DM_RS_WAIT       0x00040000      /* Running - wait for packet */
#define STATUS_DM_RS_QUEUE      0x00060000      /* Running - queue current
                                                   frame from FIFO into
                                                   buffer */
#define STATUS_DM_RS_CLOSE_OWN  0x00080000      /* Running - close receive
                                                   descriptor, clear own */
#define STATUS_DM_RS_CLOSE_ST   0x000a0000      /* Running - close receive
                                                   descriptor, write status */
#define STATUS_DM_RS_SUSPENDED  0x000c0000      /* Suspended */
#define STATUS_DM_RS_FLUSH      0x000e0000      /* Running - flush current
                                                   frame from FIFO */
#define STATUS_TS               0x00700000      /* transmit process state */
#define STATUS_TS_STOPPED       0x00000000      /* Stopped */
#define STATUS_TS_FETCH         0x00100000      /* Running - fetch transmit
                                                   descriptor */
#define STATUS_TS_WAIT          0x00200000      /* Running - wait for end
                                                   of transmission */
#define STATUS_TS_READING       0x00300000      /* Running - read buffer from
                                                   memory and queue into
                                                   FIFO */
#define STATUS_TS_RESERVED      0x00400000      /* RESERVED */
#define STATUS_TS_SETUP         0x00500000      /* Running - Setup packet */
#define STATUS_TS_SUSPENDED     0x00600000      /* Suspended */
#define STATUS_TS_CLOSE         0x00700000      /* Running - close transmit
                                                   descriptor */
#define STATUS_DM_TS_STOPPED    0x00000000      /* Stopped */
#define STATUS_DM_TS_FETCH      0x00100000      /* Running - fetch transmit
                                                   descriptor */
#define STATUS_DM_TS_SETUP      0x00200000      /* Running - Setup packet */
#define STATUS_DM_TS_READING    0x00300000      /* Running - read buffer from
                                                   memory and queue into
                                                   FIFO */
#define STATUS_DM_TS_CLOSE_OWN  0x00400000      /* Running - close transmit
                                                   descriptor, clear own */
#define STATUS_DM_TS_WAIT       0x00500000      /* Running - wait for end
                                                   of transmission */
#define STATUS_DM_TS_CLOSE_ST   0x00600000      /* Running - close transmit
                                                   descriptor, write status */
#define STATUS_DM_TS_SUSPENDED  0x00700000      /* Suspended */
#define STATUS_EB               0x03800000      /* error bits */
#define STATUS_EB_PARITY        0x00000000      /* parity errror */
#define STATUS_EB_MABT          0x00800000      /* master abort */
#define STATUS_EB_TABT          0x01000000      /* target abort */
#define STATUS_GPPI             0x04000000      /* GPIO interrupt (21142) */
#define STATUS_PNIC_TXABORT     0x04000000      /* transmit aborted */
#define STATUS_LC               0x08000000      /* 100baseTX link change
                                                   (21142/PMAC) */
#define STATUS_PMAC_WKUPI       0x10000000      /* wake up event */
#define STATUS_X3201_PMEIS      0x10000000      /* power management event
                                                   interrupt summary */
#define STATUS_X3201_SFIS       0x80000000      /* second function (Modem)
                                                   interrupt status */


/* CSR6 - Operation Mode */
#define CSR_OPMODE              TULIP_CSR6
#define OPMODE_HP               0x00000001      /* hash/perfect mode (ro) */
#define OPMODE_SR               0x00000002      /* start receive */
#define OPMODE_HO               0x00000004      /* hash only mode (ro) */
#define OPMODE_PB               0x00000008      /* pass bad frames */
#define OPMODE_WINB_APP         0x00000008      /* accept all physcal packet */
#define OPMODE_IF               0x00000010      /* inverse filter mode (ro) */
#define OPMODE_WINB_AMP         0x00000010      /* accept multicast packet */
#define OPMODE_SB               0x00000020      /* start backoff counter */
#define OPMODE_WINB_ABP         0x00000020      /* accept broadcast packet */
#define OPMODE_PR               0x00000040      /* promiscuous mode */
#define OPMODE_WINB_ARP         0x00000040      /* accept runt packet */
#define OPMODE_PM               0x00000080      /* pass all multicast */
#define OPMODE_WINB_AEP         0x00000080      /* accept error packet */
#define OPMODE_FKD              0x00000100      /* flaky oscillator disable */
#define OPMODE_AX_RB            0x00000100      /* recieve broadcast packets */
#define OPMODE_FD               0x00000200      /* full-duplex mode */
#define OPMODE_OM               0x00000c00      /* operating mode */
#define OPMODE_OM_NORMAL        0x00000000      /*     normal mode */
#define OPMODE_OM_INTLOOP       0x00000400      /*     internal loopback */
#define OPMODE_OM_EXTLOOP       0x00000800      /*     external loopback */
#define OPMODE_FC               0x00001000      /* force collision */
#define OPMODE_ST               0x00002000      /* start transmitter */
#define OPMODE_TR               0x0000c000      /* threshold control */
#define OPMODE_TR_72            0x00000000      /*     72 bytes */
#define OPMODE_TR_96            0x00004000      /*     96 bytes */
#define OPMODE_TR_128           0x00008000      /*    128 bytes */
#define OPMODE_TR_160           0x0000c000      /*    160 bytes */
#define OPMODE_WINB_TTH         0x001fc000      /* transmit threshold */
#define OPMODE_WINB_TTH_SHIFT   14
#define OPMODE_BP               0x00010000      /* backpressure enable */
#define OPMODE_CA               0x00020000      /* capture effect enable */
#define OPMODE_PNIC_TBEN        0x00020000      /* Tx backoff offset enable */
        /*
         * On Davicom DM9102, OPMODE_PS and OPMODE_HBD must
         * always be set.
         */
#define OPMODE_PS               0x00040000      /* port select:
                                                   1 = MII/SYM, 0 = SRL
                                                   (21140) */
#define OPMODE_HBD              0x00080000      /* heartbeat disable:
                                                   set in MII/SYM 100mbps,
                                                   set according to PHY
                                                   in MII 10mbps mode
                                                   (21140) */
#define OPMODE_PNIC_IT          0x00100000      /* immediate transmit */
#define OPMODE_SF               0x00200000      /* store and forward mode
                                                   (21140) */
#define OPMODE_WINB_REIT        0x1fe00000      /* receive eartly intr thresh */
#define OPMODE_WINB_REIT_SHIFT  21
#define OPMODE_TTM              0x00400000      /* Transmit Threshold Mode:
                                                   1 = 10mbps, 0 = 100mbps
                                                   (21140) */
#define OPMODE_PCS              0x00800000      /* PCS function (21140) */
#define OPMODE_SCR              0x01000000      /* scrambler mode (21140) */
#define OPMODE_MBO              0x02000000      /* must be one (21140,
                                                   DM9102) */
#define OPMODE_IDAMSB           0x04000000      /* ignore dest addr MSB
                                                   (21142) */
#define OPMODE_PNIC_DRC         0x20000000      /* don't include CRC in Rx
                                                   frames (PNIC) */
#define OPMODE_WINB_FES         0x20000000      /* fast ethernet select */
#define OPMODE_RA               0x40000000      /* receive all (21140) */
#define OPMODE_PNIC_EED         0x40000000      /* 1 == ext, 0 == int ENDEC
                                                   (PNIC) */
#define OPMODE_WINB_TEIO        0x40000000      /* transmit early intr on */
#define OPMODE_SC               0x80000000      /* special capture effect
                                                   enable (21041+) */
#define OPMODE_WINB_REIO        0x80000000      /* receive early intr on */

/* Shorthand for media-related OPMODE bits */
#define OPMODE_MEDIA_BITS       (OPMODE_FD|OPMODE_PS|OPMODE_TTM|OPMODE_PCS|OPMODE_SCR)

/* CSR7 - Interrupt Enable */
#define CSR_INTEN               TULIP_CSR7
        /* See bits for CSR5 -- Status */


/* CSR8 - Missed Frames */
#define CSR_MISSED              TULIP_CSR8
#define MISSED_MFC              0x0000ffff      /* missed packet count */
#define MISSED_MFO              0x00010000      /* missed packet count
                                                   overflowed */
#define MISSED_FOC              0x0ffe0000      /* fifo overflow counter
                                                   (21140) */
#define MISSED_OCO              0x10000000      /* overflow counter overflowed
                                                   (21140) */

#define MISSED_GETMFC(x)        ((x) & MISSED_MFC)
#define MISSED_GETFOC(x)        (((x) & MISSED_FOC) >> 17)


/* CSR9 - MII, SROM, Boot ROM, Ethernet Address ROM register. */
#define CSR_MIIROM              TULIP_CSR9
#define MIIROM_DATA             0x000000ff      /* byte of data from
                                                   Ethernet Address ROM
                                                   (21040), byte of data
                                                   to/from Boot ROM (21041+) */
#define MIIROM_SROMCS           0x00000001      /* SROM chip select */
#define MIIROM_SROMSK           0x00000002      /* SROM clock */
#define MIIROM_SROMDI           0x00000004      /* SROM data in (to) */
#define MIIROM_SROMDO           0x00000008      /* SROM data out (from) */
#define MIIROM_REG              0x00000400      /* external register select */
#define MIIROM_SR               0x00000800      /* SROM select */
#define MIIROM_BR               0x00001000      /* boot ROM select */
#define MIIROM_WR               0x00002000      /* write to boot ROM */
#define MIIROM_RD               0x00004000      /* read from boot ROM */
#define MIIROM_MOD              0x00008000      /* mode select (ro) (21041) */
#define MIIROM_MDC              0x00010000      /* MII clock */
#define MIIROM_MDO              0x00020000      /* MII data out */
#define MIIROM_MIIDIR           0x00040000      /* MII direction mode
                                                   1 = PHY in read,
                                                   0 = PHY in write */
#define MIIROM_MDI              0x00080000      /* MII data in */
#define MIIROM_DN               0x80000000      /* data not valid (21040) */

#define MIIROM_PMAC_LED0SEL     0x10000000      /* 0 == LED0 activity (def)
                                                   1 == LED0 speed */
#define MIIROM_PMAC_LED1SEL     0x20000000      /* 0 == LED1 link (def)
                                                   1 == LED1 link/act */
#define MIIROM_PMAC_LED2SEL     0x40000000      /* 0 == LED2 speed (def)
                                                   1 == LED2 collision */
#define MIIROM_PMAC_LED3SEL     0x80000000      /* 0 == LED3 receive (def)
                                                   1 == LED3 full duplex */

        /* SROM opcodes */
#define TULIP_SROM_OPC_ERASE    0x04
#define TULIP_SROM_OPC_WRITE    0x05
#define TULIP_SROM_OPC_READ     0x06

        /* The Lite-On PNIC does this completely differently */
#define PNIC_MIIROM_DATA        0x0000ffff      /* mask of data bits ??? */
#define PNIC_MIIROM_BUSY        0x80000000      /* EEPROM is busy */


/* CSR10 - Boot ROM address register (21041+). */
#define CSR_ROMADDR             TULIP_CSR10
#define ROMADDR_MASK            0x000003ff      /* boot rom address */


/* CSR11 - General Purpose Timer (21041+). */
#define CSR_GPT                 TULIP_CSR11
#define GPT_VALUE               0x0000ffff      /* timer value */
#define GPT_CON                 0x00010000      /* continuous mode */
        /* 21143-PD and 21143-TD Interrupt Mitigation bits */
#define GPT_NRX                 0x000e0000      /* number of Rx packets */
#define GPT_RXT                 0x00f00000      /* Rx timer */
#define GPT_NTX                 0x07000000      /* number of Tx packets */
#define GPT_TXT                 0x78000000      /* Tx timer */
#define GPT_CYCLE               0x80000000      /* cycle size */


/* CSR12 - SIA Status Register. */
#define CSR_SIASTAT             TULIP_CSR12
#define SIASTAT_PAUI            0x00000001      /* pin AUI/TP indication
                                                   (21040) */
#define SIASTAT_MRA             0x00000001      /* MII receive activity
                                                   (21142) */
#define SIASTAT_NCR             0x00000002      /* network connection error */
#define SIASTAT_LS100           0x00000002      /* 100baseT link status
                                                   0 == pass (21142) */
#define SIASTAT_LKF             0x00000004      /* link fail status */
#define SIASTAT_LS10            0x00000004      /* 10baseT link status
                                                   0 == pass (21142) */
#define SIASTAT_APS             0x00000008      /* auto polarity status */
#define SIASTAT_DSD             0x00000010      /* PLL self test done */
#define SIASTAT_DSP             0x00000020      /* PLL self test pass */
#define SIASTAT_DAZ             0x00000040      /* PLL all zero */
#define SIASTAT_DAO             0x00000080      /* PLL all one */
#define SIASTAT_SRA             0x00000100      /* selected port receive
                                                   activity (21041) */
#define SIASTAT_ARA             0x00000100      /* AUI receive activity
                                                   (21142) */
#define SIASTAT_NRA             0x00000200      /* non-selected port
                                                   receive activity (21041) */
#define SIASTAT_TRA             0x00000200      /* 10base-T receive activity
                                                   (21142) */
#define SIASTAT_NSN             0x00000400      /* non-stable NLPs detected
                                                   (21041) */
#define SIASTAT_TRF             0x00000800      /* transmit remote fault
                                                   (21041) */
#define SIASTAT_ANS             0x00007000      /* autonegotiation state
                                                   (21041) */
#define SIASTAT_ANS_DIS         0x00000000      /*     disabled */
#define SIASTAT_ANS_TXDIS       0x00001000      /*     transmit disabled */
#define SIASTAT_ANS_START       0x00001000      /*     (MX98715AEC) */
#define SIASTAT_ANS_ABD         0x00002000      /*     ability detect */
#define SIASTAT_ANS_ACKD        0x00003000      /*     acknowledge detect */
#define SIASTAT_ANS_ACKC        0x00004000      /*     complete acknowledge */
#define SIASTAT_ANS_FLPGOOD     0x00005000      /*     FLP link good */
#define SIASTAT_ANS_LINKCHECK   0x00006000      /*     link check */
#define SIASTAT_LPN             0x00008000      /* link partner negotiable
                                                   (21041) */
#define SIASTAT_LPC             0xffff0000      /* link partner code word */

#define SIASTAT_GETLPC(x)       (((x) & SIASTAT_LPC) >> 16)


/* CSR13 - SIA Connectivity Register. */
#define CSR_SIACONN             TULIP_CSR13
#define SIACONN_SRL             0x00000001      /* SIA reset
                                                   (0 == reset) */
#define SIACONN_PS              0x00000002      /* pin AUI/TP selection
                                                   (21040) */
#define SIACONN_CAC             0x00000004      /* CSR autoconfiguration */
#define SIACONN_AUI             0x00000008      /* select AUI (0 = TP) */
#define SIACONN_EDP             0x00000010      /* SIA PLL external input
                                                   enable (21040) */
#define SIACONN_ENI             0x00000020      /* encoder input multiplexer
                                                   (21040) */
#define SIACONN_SIM             0x00000040      /* serial interface input
                                                   multiplexer (21040) */
#define SIACONN_ASE             0x00000080      /* APLL start enable
                                                   (21040) */
#define SIACONN_SEL             0x00000f00      /* external port output
                                                   multiplexer select
                                                   (21040) */
#define SIACONN_IE              0x00001000      /* input enable (21040) */
#define SIACONN_OE1_3           0x00002000      /* output enable 1, 3
                                                   (21040) */
#define SIACONN_OE2_4           0x00004000      /* output enable 2, 4
                                                   (21040) */
#define SIACONN_OE5_6_7         0x00008000      /* output enable 5, 6, 7
                                                   (21040) */
#define SIACONN_SDM             0x0000ef00      /* SIA diagnostic mode;
                                                   always set to this value
                                                   for normal operation
                                                   (21041) */


/* CSR14 - SIA Transmit Receive Register. */
#define CSR_SIATXRX             TULIP_CSR14
#define SIATXRX_ECEN            0x00000001      /* encoder enable */
#define SIATXRX_LBK             0x00000002      /* loopback enable */
#define SIATXRX_DREN            0x00000004      /* driver enable */
#define SIATXRX_LSE             0x00000008      /* link pulse send enable */
#define SIATXRX_CPEN            0x00000030      /* compensation enable */
#define SIATXRX_CPEN_DIS0       0x00000000      /*     disabled */
#define SIATXRX_CPEN_DIS1       0x00000010      /*     disabled */
#define SIATXRX_CPEN_HIGHPWR    0x00000020      /*     high power */
#define SIATXRX_CPEN_NORMAL     0x00000030      /*     normal */
#define SIATXRX_MBO             0x00000040      /* must be one (21041 pass 2) */
#define SIATXRX_TH              0x00000040      /* 10baseT HDX enable (21142) */
#define SIATXRX_ANE             0x00000080      /* autonegotiation enable
                                                   (21041/21142) */
#define SIATXRX_RSQ             0x00000100      /* receive squelch enable */
#define SIATXRX_CSQ             0x00000200      /* collision squelch enable */
#define SIATXRX_CLD             0x00000400      /* collision detect enable */
#define SIATXRX_SQE             0x00000800      /* signal quality generation
                                                   enable */
#define SIATXRX_LTE             0x00001000      /* link test enable */
#define SIATXRX_APE             0x00002000      /* auto-polarity enable */
#define SIATXRX_SPP             0x00004000      /* set polarity plus */
#define SIATXRX_TAS             0x00008000      /* 10base-T/AUI autosensing
                                                   enable (21041/21142) */
#define SIATXRX_THX             0x00010000      /* 100baseTX-HDX (21142) */
#define SIATXRX_TXF             0x00020000      /* 100baseTX-FDX (21142) */
#define SIATXRX_T4              0x00040000      /* 100baseT4 (21142) */


/* CSR15 - SIA General Register. */
#define CSR_SIAGEN              TULIP_CSR15
#define SIAGEN_JBD              0x00000001      /* jabber disable */
#define SIAGEN_HUJ              0x00000002      /* host unjab */
#define SIAGEN_JCK              0x00000004      /* jabber clock */
#define SIAGEN_ABM              0x00000008      /* BNC select (21041) */
#define SIAGEN_RWD              0x00000010      /* receive watchdog disable */
#define SIAGEN_RWR              0x00000020      /* receive watchdog release */
#define SIAGEN_LE1              0x00000040      /* LED 1 enable (21041) */
#define SIAGEN_LV1              0x00000080      /* LED 1 value (21041) */
#define SIAGEN_TSCK             0x00000100      /* test clock */
#define SIAGEN_FUSQ             0x00000200      /* force unsquelch */
#define SIAGEN_FLF              0x00000400      /* force link fail */
#define SIAGEN_LSD              0x00000800      /* LED stretch disable
                                                   (21041) */
#define SIAGEN_LEE              0x00000800      /* Link extend enable (21142) */
#define SIAGEN_DPST             0x00001000      /* PLL self-test start */
#define SIAGEN_FRL              0x00002000      /* force receiver low */
#define SIAGEN_LE2              0x00004000      /* LED 2 enable (21041) */
#define SIAGEN_RMP              0x00004000      /* received magic packet
                                                   (21143) */
#define SIAGEN_LV2              0x00008000      /* LED 2 value (21041) */
#define SIAGEN_HCKR             0x00008000      /* hacker (21143) */
#define SIAGEN_MD               0x000f0000      /* general purpose mode/data */
#define SIAGEN_LGS0             0x00100000      /* LED/GEP 0 select */
#define SIAGEN_LGS1             0x00200000      /* LED/GEP 1 select */
#define SIAGEN_LGS2             0x00400000      /* LED/GEP 2 select */
#define SIAGEN_LGS3             0x00800000      /* LED/GEP 3 select */
#define SIAGEN_GEI0             0x01000000      /* GEP pin 0 intr enable */
#define SIAGEN_GEI1             0x02000000      /* GEP pin 1 intr enable */
#define SIAGEN_RME              0x04000000      /* receive match enable */
#define SIAGEN_CWE              0x08000000      /* control write enable */
#define SIAGEN_GI0              0x10000000      /* GEP pin 0 interrupt */
#define SIAGEN_GI1              0x20000000      /* GEP pin 1 interrupt */
#define SIAGEN_RMI              0x40000000      /* receive match interrupt */


/* CSR12 - General Purpose Port (21140+). */
#define CSR_GPP                 TULIP_CSR12
#define GPP_MD                  0x000000ff      /* general purpose mode/data */
#define GPP_GPC                 0x00000100      /* general purpose control */
#define GPP_PNIC_GPD            0x0000000f      /* general purpose data */
#define GPP_PNIC_GPC            0x000000f0      /* general purpose control */

#define GPP_PNIC_IN(x)          (1 << (x))
#define GPP_PNIC_OUT(x, on)     (((on) << (x)) | (1 << ((x) + 4)))

/*
 * The Lite-On PNIC manual recommends the following for the General Purpose
 * I/O pins:
 *
 *      0       Speed Relay             1 == 100mbps
 *      1       100mbps loopback        1 == loopback
 *      2       BNC DC-DC converter     1 == select BNC
 *      3       Link 100                1 == 100baseTX link status
 */
#define GPP_PNIC_PIN_SPEED_RLY  0
#define GPP_PNIC_PIN_100M_LPKB  1
#define GPP_PNIC_PIN_BNC_XMER   2
#define GPP_PNIC_PIN_LNK100X    3

/*
 * Definitions used for the SMC 9332DST (21140) board.
 */
#define GPP_SMC9332DST_PINS     0x3f    /* General Purpose Pin directions */
#define GPP_SMC9332DST_OK10     0x80    /* 10 Mb/sec Signal Detect gep<7> */
#define GPP_SMC9332DST_OK100    0x40    /* 100 Mb/sec Signal Detect gep<6> */
#define GPP_SMC9332DST_INIT     0x09    /* No loopback --- point-to-point */

/*
 * Definitions used for the Cogent EM1x0 (21140) board.
 */
#define GPP_COGENT_EM1x0_PINS   0x3f    /* General Purpose Pin directions */
#define GPP_COGENT_EM1x0_INIT   0x09    /* No loopback --- point-to-point */


/*
 * Digital Semiconductor 21040 registers.
 */

/* CSR11 - Full Duplex Register */
#define CSR_21040_FDX           TULIP_CSR11
#define FDX21040_FDXACV         0x0000ffff      /* full duplex
                                                   autoconfiguration value */


/* SIA configuration for 10base-T (from the 21040 manual) */
#define SIACONN_21040_10BASET   0x0000ef01
#define SIATXRX_21040_10BASET   0x0000ffff
#define SIAGEN_21040_10BASET    0x00000000


/* SIA configuration for 10base-T full-duplex (from the 21040 manual) */
#define SIACONN_21040_10BASET_FDX 0x0000ef01
#define SIATXRX_21040_10BASET_FDX 0x0000fffd
#define SIAGEN_21040_10BASET_FDX  0x00000000


/* SIA configuration for 10base-5 (from the 21040 manual) */
#define SIACONN_21040_AUI       0x0000ef09
#define SIATXRX_21040_AUI       0x00000705
#define SIAGEN_21040_AUI        0x00000006


/* SIA configuration for External SIA (from the 21040 manual) */
#define SIACONN_21040_EXTSIA    0x00003041
#define SIATXRX_21040_EXTSIA    0x00000000
#define SIAGEN_21040_EXTSIA     0x00000006


/*
 * Digital Semiconductor 21041 registers.
 */

/* SIA configuration for 10base-T (from the 21041 manual) */
#define SIACONN_21041_10BASET   0x0000ef01
#define SIATXRX_21041_10BASET   0x0000ff3f
#define SIAGEN_21041_10BASET    0x00000000

#define SIACONN_21041P2_10BASET SIACONN_21041_10BASET
#define SIATXRX_21041P2_10BASET 0x0000ffff
#define SIAGEN_21041P2_10BASET  SIAGEN_21041_10BASET


/* SIA configuration for 10base-T full-duplex (from the 21041 manual) */
#define SIACONN_21041_10BASET_FDX   0x0000ef01
#define SIATXRX_21041_10BASET_FDX   0x0000ff3d
#define SIAGEN_21041_10BASET_FDX    0x00000000

#define SIACONN_21041P2_10BASET_FDX SIACONN_21041_10BASET_FDX
#define SIATXRX_21041P2_10BASET_FDX 0x0000ffff
#define SIAGEN_21041P2_10BASET_FDX  SIAGEN_21041_10BASET_FDX


/* SIA configuration for 10base-5 (from the 21041 manual) */
#define SIACONN_21041_AUI       0x0000ef09
#define SIATXRX_21041_AUI       0x0000f73d
#define SIAGEN_21041_AUI        0x0000000e

#define SIACONN_21041P2_AUI     SIACONN_21041_AUI
#define SIATXRX_21041P2_AUI     0x0000f7fd
#define SIAGEN_21041P2_AUI      SIAGEN_21041_AUI


/* SIA configuration for 10base-2 (from the 21041 manual) */
#define SIACONN_21041_BNC       0x0000ef09
#define SIATXRX_21041_BNC       0x0000f73d
#define SIAGEN_21041_BNC        0x00000006

#define SIACONN_21041P2_BNC     SIACONN_21041_BNC
#define SIATXRX_21041P2_BNC     0x0000f7fd
#define SIAGEN_21041P2_BNC      SIAGEN_21041_BNC


/*
 * Digital Semiconductor 21142/21143 registers.
 */

/* SIA configuration for 10baseT (from the 21143 manual) */
#define SIACONN_21142_10BASET   0x00000001
#define SIATXRX_21142_10BASET   0x00007f3f
#define SIAGEN_21142_10BASET    0x00000008


/* SIA configuration for 10baseT full-duplex (from the 21143 manual) */
#define SIACONN_21142_10BASET_FDX   0x00000001
#define SIATXRX_21142_10BASET_FDX   0x00007f3d
#define SIAGEN_21142_10BASET_FDX    0x00000008


/* SIA configuration for 10base5 (from the 21143 manual) */
#define SIACONN_21142_AUI       0x00000009
#define SIATXRX_21142_AUI       0x00004705
#define SIAGEN_21142_AUI        0x0000000e


/* SIA configuration for 10base2 (from the 21143 manual) */
#define SIACONN_21142_BNC       0x00000009
#define SIATXRX_21142_BNC       0x00004705
#define SIAGEN_21142_BNC        0x00000006


/*
 * Lite-On 82C168/82C169 registers.
 */

/* ENDEC General Register */
#define CSR_PNIC_ENDEC          0x78
#define PNIC_ENDEC_JDIS         0x00000001      /* jabber disable */

/* SROM Power Register */
#define CSR_PNIC_SROMPWR        0x90
#define PNIC_SROMPWR_MRLE       0x00000001      /* Memory-Read-Line enable */
#define PNIC_SROMPWR_CB         0x00000002      /* cache boundary alignment
                                                   burst type; 1 == burst to
                                                   boundary, 0 == single-cycle
                                                   to boundary */

/* SROM Control Register */
#define CSR_PNIC_SROMCTL        0x98
#define PNIC_SROMCTL_addr       0x0000003f      /* mask of address bits */
/* XXX THESE ARE WRONG ACCORDING TO THE MANUAL! */
#define PNIC_SROMCTL_READ       0x00000600      /* read command */

/* MII Access Register */
#define CSR_PNIC_MII            0xa0
#define PNIC_MII_DATA           0x0000ffff      /* mask of data bits */
#define PNIC_MII_REG            0x007c0000      /* register mask */
#define PNIC_MII_REGSHIFT       18
#define PNIC_MII_PHY            0x0f800000      /* phy mask */
#define PNIC_MII_PHYSHIFT       23
#define PNIC_MII_OPCODE         0x30000000      /* opcode mask */
#define PNIC_MII_RESERVED       0x00020000      /* must be one/must be zero;
                                                   2 bits are described here */
#define PNIC_MII_MBO            0x40000000      /* must be one */
#define PNIC_MII_BUSY           0x80000000      /* MII is busy */

#define PNIC_MII_WRITE          0x10000000      /* write PHY command */
#define PNIC_MII_READ           0x20000000      /* read PHY command */

/* NWAY Register */
#define CSR_PNIC_NWAY           0xb8
#define PNIC_NWAY_RS            0x00000001      /* reset NWay block */
#define PNIC_NWAY_PD            0x00000002      /* power down NWay block */
#define PNIC_NWAY_BX            0x00000004      /* bypass transceiver */
#define PNIC_NWAY_LC            0x00000008      /* AUI low current mode */
#define PNIC_NWAY_UV            0x00000010      /* low squelch voltage */
#define PNIC_NWAY_DX            0x00000020      /* disable TP pol. correction */
#define PNIC_NWAY_TW            0x00000040      /* select TP (0 == AUI) */
#define PNIC_NWAY_AF            0x00000080      /* AUI full/half step input
                                                   voltage */
#define PNIC_NWAY_FD            0x00000100      /* full duplex mode */
#define PNIC_NWAY_DL            0x00000200      /* disable link integrity
                                                   test */
#define PNIC_NWAY_DM            0x00000400      /* disable AUI/TP autodetect */
#define PNIC_NWAY_100           0x00000800      /* 1 == 100mbps, 0 == 10mbps */
#define PNIC_NWAY_NW            0x00001000      /* enable NWay block */
#define PNIC_NWAY_CAP10T        0x00002000      /* adv. 10baseT */
#define PNIC_NWAY_CAP10TFDX     0x00004000      /* adv. 10baseT-FDX */
#define PNIC_NWAY_CAP100TXFDX   0x00008000      /* adv. 100baseTX-FDX */
#define PNIC_NWAY_CAP100TX      0x00010000      /* adv. 100baseTX */
#define PNIC_NWAY_CAP100T4      0x00020000      /* adv. 100base-T4 */
#define PNIC_NWAY_RN            0x02000000      /* re-negotiate enable */
#define PNIC_NWAY_RF            0x04000000      /* remote fault detected */
#define PNIC_NWAY_LPAR10T       0x08000000      /* link part. 10baseT */
#define PNIC_NWAY_LPAR10TFDX    0x10000000      /* link part. 10baseT-FDX */
#define PNIC_NWAY_LPAR100TXFDX  0x20000000      /* link part. 100baseTX-FDX */
#define PNIC_NWAY_LPAR100TX     0x40000000      /* link part. 100baseTX */
#define PNIC_NWAY_LPAR100T4     0x80000000      /* link part. 100base-T4 */
#define PNIC_NWAY_LPAR_MASK     0xf8000000


/*
 * Macronix 98713, 98713A, 98715, 98715A, 98715AEC, 98725, and
 * Lite-On 82C115 registers.
 */

        /*
         * Note, the MX98713 is very Tulip-like:
         *
         *      CSR12           General Purpose Port (like 21140)
         *      CSR13           reserved
         *      CSR14           reserved
         *      CSR15           Watchdog Timer (like 21140)
         *
         * The Macronix CSR12, CSR13, CSR14, and CSR15 exist only
         * on the MX98713A and higher.
         */

/* CSR12 - 10base-T Status Port (similar to SIASTAT) */
        /* See SIASTAT 21142/21143 bits */
#define CSR_PMAC_10TSTAT           TULIP_CSR12
#define PMAC_SIASTAT_MASK       (SIASTAT_LS100|SIASTAT_LS10|            \
                                 SIASTAT_APS|SIASTAT_TRF|SIASTAT_ANS|   \
                                 SIASTAT_LPN|SIASTAT_LPC)


/* CSR13 - NWAY Reset Register */
#define CSR_PMAC_NWAYRESET      TULIP_CSR13
        /* See SIACONN 21142/21143 bits */
#define PMAC_SIACONN_MASK       (SIACONN_SRL)
#define PMAC_NWAYRESET_100TXRESET 0x00000002    /* 100base PMD reset */


/* CSR14 - 10base-T Control Port */
#define CSR_PMAC_10TCTL         TULIP_CSR14
        /* See SIATXRX 21142/21143 bits */
#define PMAC_SIATXRX_MASK       (SIATXRX_LBK|SIATXRX_DREN|SIATXRX_TH|   \
                                 SIATXRX_ANE|SIATXRX_RSQ|SIATXRX_LTE|   \
                                 SIATXRX_THX|SIATXRX_TXF|SIATXRX_T4)


/* CSR15 - Watchdog Timer Register */
        /* MX98713: see 21140 CSR15 */
        /* others: see SIAGEN 21142/21143 bits */
#define PMAC_SIAGEN_MASK        (SIAGEN_JBD|SIAGEN_HUJ|SIAGEN_JCK|      \
                                 SIAGEN_RWD|SIAGEN_RWR)


/* CSR16 - Test Operation Register (a.k.a. Magic Packet Register) */
#define CSR_PMAC_TOR            TULIP_CSR16
#define PMAC_TOR_98713          0x0F370000
#define PMAC_TOR_98715          0x0B3C0000


/* CSR20 - NWAY Status */
#define CSR_PMAC_NWAYSTAT       TULIP_CSR20
        /*
         * Note: the MX98715A manual claims that EQTEST and PCITEST
         * must be set to 1 by software for normal operation, but
         * this does not appear to be necessary.  This is probably
         * one of the things that frobbing the Test Operation Register
         * does.
         *
         * MX98715AEC uses this register for Auto Compensation.
         * CSR20<14> and CSR20<9> are called DS130 and DS120
         */
#define PMAC_NWAYSTAT_DS120     0x00000200      /* Auto-compensation circ */
#define PMAC_NWAYSTAT_DS130     0x00004000      /* Auto-compensation circ */
#define PMAC_NWAYSTAT_EQTEST    0x00001000      /* EQ test */
#define PMAC_NWAYSTAT_PCITEST   0x00010000      /* PCI test */
#define PMAC_NWAYSTAT_10TXH     0x08000000      /* 10t accepted */
#define PMAC_NWAYSTAT_10TXF     0x10000000      /* 10t-fdx accepted */
#define PMAC_NWAYSTAT_100TXH    0x20000000      /* 100tx accepted */
#define PMAC_NWAYSTAT_100TXF    0x40000000      /* 100tx-fdx accepted */
#define PMAC_NWAYSTAT_T4        0x80000000      /* 100t4 accepted */


/* CSR21 - Flow Control Register */
#define CSR_PNICII_FLOWCTL      TULIP_CSR21
#define PNICII_FLOWCTL_WKFCATEN 0x00000010      /* enable wake-up frame
                                                   catenation feature */
#define PNICII_FLOWCTL_NFCE     0x00000020      /* accept flow control result
                                                   from NWay */
#define PNICII_FLOWCTL_FCTH0    0x00000040      /* rx flow control thresh 0 */
#define PNICII_FLOWCTL_FCTH1    0x00000080      /* rx flow control thresh 1 */
#define PNICII_FLOWCTL_REJECTFC 0x00000100      /* abort rx flow control */
#define PNICII_FLOWCTL_STOPTX   0x00000200      /* tx flow stopped */
#define PNICII_FLOWCTL_RUFCEN   0x00000400      /* send flow control when
                                                   RU interrupt occurs */
#define PNICII_FLOWCTL_RXFCEN   0x00000800      /* rx flow control enable */
#define PNICII_FLOWCTL_TXFCEN   0x00001000      /* tx flow control enable */
#define PNICII_FLOWCTL_RESTOP   0x00002000      /* restop mode */
#define PNICII_FLOWCTL_RESTART  0x00004000      /* restart mode */
#define PNICII_FLOWCTL_TEST     0x00008000      /* test flow control timer */
#define PNICII_FLOWCTL_TMVAL    0xffff0000      /* timer value in flow
                                                   control frame */

#define PNICII_FLOWCTL_TH_512   (PNICII_FLOWCTL_FCTH0|PNICII_FLOWCTL_FCTH1)
#define PNICII_FLOWCTL_TH_256   (PNICII_FLOWCTL_FCTH1)
#define PNICII_FLOWCTL_TH_128   (PNICII_FLOWCTL_FCTH0)
#define PNICII_FLOWCTL_TH_OVFLW (0)


/* CSR22 - MAC ID Byte 3-0 Register */
#define CSR_PNICII_MACID0       TULIP_CSR22
#define PNICII_MACID_1          0       /* shift */
#define PNICII_MACID_0          8       /* shift */
#define PNICII_MACID_3          16      /* shift */
#define PNICII_MACID_2          24      /* shift */


/* CSR23 - Magic ID Byte 5,4/MACID Byte 5,4 Register */
#define PNICII_MACID_5          0       /* shift */
#define PNICII_MACID_4          8       /* shift */
#define PNICII_MAGID_5          16      /* shift */
#define PNICII_MAGIC_4          24      /* shift */


/* CSR24 - Magic ID Byte 3-0 Register */
#define PNICII_MAGID_1          0       /* shift */
#define PNICII_MAGID_0          8       /* shift */
#define PNICII_MAGID_3          16      /* shift */
#define PNICII_MAGID_2          24      /* shift */


/* CSR25 - CSR28 - Filter Byte Mask Registers */
#define CSR_PNICII_MASK0        TULIP_CSR25

#define CSR_PNICII_MASK1        TULIP_CSR26

#define CSR_PNICII_MASK2        TULIP_CSR27

#define CSR_PNICII_MASK3        TULIP_CSR28


/* CSR29 - Filter Offset Register */
#define CSR_PNICII_FILOFF       TULIP_CSR29
#define PNICII_FILOFF_PAT0      0x0000007f      /* pattern 0 offset */
#define PNICII_FILOFF_EN0       0x00000080      /* enable pattern 0 */
#define PNICII_FILOFF_PAT1      0x00007f00      /* pattern 1 offset */
#define PNICII_FILOFF_EN1       0x00008000      /* enable pattern 1 */
#define PNICII_FILOFF_PAT2      0x007f0000      /* pattern 2 offset */
#define PNICII_FILOFF_EN2       0x00800000      /* enable pattern 2 */
#define PNICII_FILOFF_PAT3      0x7f000000      /* pattern 3 offset */
#define PNICII_FILOFF_EN3       0x80000000      /* enable pattern 3 */


/* CSR30 - Filter 1 and 0 CRC-16 Register */
#define CSR_PNICII_FIL01        TULIP_CSR30
#define PNICII_FIL01_CRC0       0x0000ffff      /* CRC-16 of pattern 0 */
#define PNICII_FIL01_CRC1       0xffff0000      /* CRC-16 of pattern 1 */


/* CSR31 = Filter 3 and 2 CRC-16 Register */
#define CSR_PNICII_FIL23        TULIP_CSR31
#define PNICII_FIL23_CRC2       0x0000ffff      /* CRC-16 of pattern 2 */
#define PNICII_FIL23_CRC3       0xffff0000      /* CRC-16 of pattern 3 */


/*
 * Winbond 89C840F registers.
 */

/* CSR12 - Current Receive Descriptor Register */
#define CSR_WINB_CRDAR          TULIP_CSR12


/* CSR13 - Current Receive Buffer Register */
#define CSR_WINB_CCRBAR         TULIP_CSR13


/* CSR14 - Multicast Address Register 0 */
#define CSR_WINB_CMA0           TULIP_CSR14


/* CSR15 - Multicast Address Register 1 */
#define CSR_WINB_CMA1           TULIP_CSR15


/* CSR16 - Physical Address Register 0 */
#define CSR_WINB_CPA0           TULIP_CSR16


/* CSR17 - Physical Address Register 1 */
#define CSR_WINB_CPA1           TULIP_CSR17


/* CSR18 - Boot ROM Size Register */
#define CSR_WINB_CBRCR          TULIP_CSR18
#define WINB_CBRCR_NONE         0x00000000      /* no boot rom */
                        /*      0x00000001         also no boot rom */
#define WINB_CBRCR_8K           0x00000002      /* 8k */
#define WINB_CBRCR_16K          0x00000003      /* 16k */
#define WINB_CBRCR_32K          0x00000004      /* 32k */
#define WINB_CBRCR_64K          0x00000005      /* 64k */
#define WINB_CBRCR_128K         0x00000006      /* 128k */
#define WINB_CBRCR_256K         0x00000007


/* CSR19 - Current Transmit Descriptor Register */
#define CSR_WINB_CTDAR          TULIP_CSR19


/* CSR20 - Current Transmit Buffer Register */
#define CSR_WINB_CTBAR          TULIP_CSR20


/*
 * ADMtek AL981 registers
 *
 * We define these as strict byte offsets into PCI space, since
 * not all of them have consistent access rules.
 */

/* CSR13 - Wake-up Control/Status Register */
#define CSR_ADM_WCSR            0x68
#define ADM_WCSR_LSC            0x00000001      /* link status changed */
#define ADM_WCSR_MPR            0x00000002      /* magic packet received */
#define ADM_WCSR_WFR            0x00000004      /* wake up frame received */
#define ADM_WCSR_LSCE           0x00000100      /* link status changed en. */
#define ADM_WCSR_MPRE           0x00000200      /* magic packet receive en. */
#define ADM_WCSR_WFRE           0x00000400      /* wake up frame receive en. */
#define ADM_WCSR_LINKON         0x00010000      /* link-on detect en. */
#define ADM_WCSR_LINKOFF        0x00020000      /* link-off detect en. */
#define ADM_WCSR_WP5E           0x02000000      /* wake up pat. 5 en. */
#define ADM_WCSR_WP4E           0x04000000      /* wake up pat. 4 en. */
#define ADM_WCSR_WP3E           0x08000000      /* wake up pat. 3 en. */
#define ADM_WCSR_WP2E           0x10000000      /* wake up pat. 2 en. */
#define ADM_WCSR_WP1E           0x20000000      /* wake up pat. 1 en. */
#define ADM_WCSR_CRCT           0x40000000      /* CRC-16 type:
                                                   0 == 0000 initial
                                                   1 == ffff initial */


/* CSR14 - Wake-up Pattern Data Register */
#define CSR_ADM_WPDR            0x70

        /*
         * 25 consecutive longword writes are issued to WPDR to
         * program the wake-up pattern filter.  The data written
         * is as follows:
         *
         *      XXX
         */


/* CSR15 - see 21140 CSR15 (Watchdog Timer) */


/* CSR16 - Assistant CSR5 (Status Register 2) */
#define CSR_ADM_ASR             0x80
                                                /* 0 - 14: same as CSR5 */
#define ADM_ASR_AAISS           0x00080000      /* added abnormal int. sum. */
#define ADM_ASR_ANISS           0x00010000      /* added normal int. sum. */
                                                /* XXX Receive state */
                                                /* XXX Transmit state */
#define ADM_ASR_BET             0x03800000      /* bus error type */
#define ADM_ASR_BET_PERR        0x00000000      /*   parity error */
#define ADM_ASR_BET_MABT        0x00800000      /*   master abort */
#define ADM_ASR_BET_TABT        0x01000000      /*   target abort */
#define ADM_ASR_PFR             0x04000000      /* PAUSE frame received */
#define ADM_ASR_TDIS            0x10000000      /* transmit def. int. status */
#define ADM_ASR_XIS             0x20000000      /* xcvr int. status */
#define ADM_ASR_REIS            0x40000000      /* receive early int. status */
#define ADM_ASR_TEIS            0x80000000      /* transmit early int. status */


/* CSR17 - Assistant CSR7 (Interrupt Enable Register 2) */
#define CSR_ADM_AIE             0x84
        /* See CSR16 for valid bits */


/* CSR18 - Command Register */
#define CSR_ADM_CR              0x88
#define ADM_CR_ATUR             0x00000001      /* auto. tx underrun recover */
#define ADM_CR_SINT             0x00000002      /* software interrupt */
#define ADM_CR_DRT              0x0000000c      /* drain receive threshold */
#define ADM_CR_DRT_8LW          0x00000000      /*   8 longwords */
#define ADM_CR_DRT_16LW         0x00000004      /*   16 longwords */
#define ADM_CR_DRT_SF           0x00000008      /*   store-and-forward */
#define ADM_CR_RTE              0x00000010      /* receive threshold enable */
#define ADM_CR_PAUSE            0x00000020      /* enable PAUSE function */
#define ADM_CR_RWP              0x00000040      /* reset wake-up pattern
                                                   data register pointer */
        /* 16 - 31 are automatically recalled from the EEPROM */
#define ADM_CR_WOL              0x00040000      /* wake-on-lan enable */
#define ADM_CR_PM               0x00080000      /* power management enable */
#define ADM_CR_RFS              0x00600000      /* Receive FIFO size */
#define ADM_CR_RFS_1K           0x00600000      /*   1K FIFO */
#define ADM_CR_RFS_2K           0x00400000      /*   2K FIFO */
#define ADM_CR_LEDMODE          0x00800000      /* LED mode */
#define ADM_CR_AUXCL            0x30000000      /* aux current load */
#define ADM_CR_D3CS             0x80000000      /* D3 cold wake up enable */


/* CSR19 - PCI bus performance counter */
#define CSR_ADM_PCIC            0x8c
#define ADM_PCIC_DWCNT          0x000000ff      /* double-word count of
                                                   last bus-master
                                                   transaction */
#define ADM_PCIC_CLKCNT         0xffff0000      /* number of PCI clocks
                                                   between read request
                                                   and access completed */

/* CSR20 - Power Management Control/Status Register */
#define CSR_ADM_PMCSR           0x90
        /*
         * This register is also mapped into the PCI configuration
         * space as the PMCSR.
         */


/* CSR23 - Transmit Burst Count/Time Out Register */
#define CSR_ADM_TXBR            0x9c
#define ADM_TXBR_TTO            0x00000fff      /* transmit timeout */
#define ADM_TXBR_TBCNT          0x001f0000      /* transmit burst count */


/* CSR24 - Flash ROM Port Register */
#define CSR_ADM_FROM            0xa0
#define ADM_FROM_DATA           0x000000ff      /* data to/from Flash */
#define ADM_FROM_ADDR           0x01ffff00      /* Flash address */
#define ADM_FROM_ADDR_SHIFT     8
#define ADM_FROM_WEN            0x04000000      /* write enable */
#define ADM_FROM_REN            0x08000000      /* read enable */
#define ADM_FROM_bra16on        0x80000000      /* pin 87 is brA16, else
                                                   pin 87 is fd/col LED pin */


/* CSR25 - Physical Address Register 0 */
#define CSR_ADM_PAR0            0xa4


/* CSR26 - Physical Address Register 1 */
#define CSR_ADM_PAR1            0xa8


/* CSR27 - Multicast Address Register 0 */
#define CSR_ADM_MAR0            0xac


/* CSR28 - Multicast Address Register 1 */
#define CSR_ADM_MAR1            0xb0


/* Internal PHY registers are mapped here (lower 16 bits valid) */

#define CSR_ADM_BMCR            0xb4
#define CSR_ADM_BMSR            0xb8
#define CSR_ADM_PHYIDR1         0xbc
#define CSR_ADM_PHYIDR2         0xc0
#define CSR_ADM_ANAR            0xc4
#define CSR_ADM_ANLPAR          0xc8
#define CSR_ADM_ANER            0xcc

/* XCVR Mode Control Register */
#define CSR_ADM_XMC             0xd0
#define ADM_XMC_LD              0x00000800      /* long distance mode
                                                   (low squelch enable) */


/* XCVR Configuration Information and Interrupt Status Register */
#define CSR_ADM_XCIIS           0xd4
#define ADM_XCIIS_REF           0x0001          /* 64 error packets received */
#define ADM_XCIIS_ANPR          0x0002          /* autoneg page received */
#define ADM_XCIIS_PDF           0x0004          /* parallel detection fault */
#define ADM_XCIIS_ANAR          0x0008          /* autoneg ACK */
#define ADM_XCIIS_LS            0x0010          /* link status (1 == fail) */
#define ADM_XCIIS_RFD           0x0020          /* remote fault */
#define ADM_XCIIS_ANC           0x0040          /* autoneg completed */
#define ADM_XCIIS_PAUSE         0x0080          /* PAUSE enabled */
#define ADM_XCIIS_DUPLEX        0x0100          /* full duplex */
#define ADM_XCIIS_SPEED         0x0200          /* 100Mb/s */


/* XCVR Interrupt Enable Register */
#define CSR_ADM_XIE             0xd8
        /* Bits are as for XCIIS */


/* XCVR 100baseTX PHY Control/Status Register */
#define CSR_ADM_100CTR          0xdc
#define ADM_100CTR_DISCRM       0x0001          /* disable scrambler */
#define ADM_100CTR_DISMLT       0x0002          /* disable MLT3 ENDEC */
#define ADM_100CTR_CMODE        0x001c          /* current operating mode */
#define ADM_100CTR_CMODE_AUTO   0x0000          /*   in autoneg */
#define ADM_100CTR_CMODE_10     0x0004          /*   10baseT */
#define ADM_100CTR_CMODE_100    0x0008          /*   100baseTX */
                        /*      0x000c               reserved */
                        /*      0x0010               reserved */
#define ADM_100CTR_CMODE_10FD   0x0014          /*   10baseT-FDX */
#define ADM_100CTR_CMODE_100FD  0x0018          /*   100baseTX-FDX */
#define ADM_100CTR_CMODE_ISO    0x001c          /*   isolated */
#define ADM_100CTR_ISOTX        0x0020          /* transmit isolation */
#define ADM_100CTR_ENRZI        0x0080          /* enable NRZ <> NRZI conv. */
#define ADM_100CTR_ENDCR        0x0100          /* enable DC restoration */
#define ADM_100CTR_ENRLB        0x0200          /* enable remote loopback */
#define ADM_100CTR_RXVPP        0x0800          /* peak Rx voltage:
                                                   0 == 1.0 VPP
                                                   1 == 1.4 VPP */
#define ADM_100CTR_ANC          0x1000          /* autoneg completed */
#define ADM_100CTR_DISRER       0x2000          /* disable Rx error counter */

/* Operation Mode Register (AN983) */
#define CSR_ADM983_OPMODE       0xfc
#define ADM983_OPMODE_SPEED     0x80000000      /* 1 == 100, 0 == 10 */
#define ADM983_OPMODE_FD        0x40000000      /* 1 == fd, 0 == hd */
#define ADM983_OPMODE_LINK      0x20000000      /* 1 == link, 0 == no link */
#define ADM983_OPMODE_EERLOD    0x04000000      /* reload from EEPROM */
#define ADM983_OPMODE_SingleChip 0x00000007     /* single-chip mode */
#define ADM983_OPMODE_MacOnly    0x00000004     /* MAC-only mode */

/*
 * Xircom X3201-3 registers
 */

/* Power Management Register */
#define CSR_X3201_PMR           TULIP_CSR16
#define X3201_PMR_EDINT         0x0000000f      /* energy detect interval */
#define X3201_PMR_EDEN          0x00000100      /* energy detect enable */
#define X3201_PMR_MPEN          0x00000200      /* magic packet enable */
#define X3201_PMR_WOLEN         0x00000400      /* Wake On Lan enable */
#define X3201_PMR_PMGP0EN       0x00001000      /* GP0 change enable */
#define X3201_PMR_PMLCEN        0x00002000      /* link change enable */
#define X3201_PMR_WOLTMEN       0x00008000      /* WOL template mem enable */
#define X3201_PMR_EP            0x00010000      /* energy present */
#define X3201_PMR_LP            0x00200000      /* link present */
#define X3201_PMR_EDES          0x01000000      /* ED event status */
#define X3201_PMR_MPES          0x02000000      /* MP event status */
#define X3201_PMR_WOLES         0x04000000      /* WOL event status */
#define X3201_PMR_WOLPS         0x08000000      /* WOL process status */
#define X3201_PMR_GP0ES         0x10000000      /* GP0 event status */
#define X3201_PMR_LCES          0x20000000      /* LC event status */

/*
 * Davicom DM9102 registers.
 */

/* PHY Status Register */
#define CSR_DM_PHYSTAT          TULIP_CSR12
#define DM_PHYSTAT_10           0x00000001      /* 10Mb/s */
#define DM_PHYSTAT_100          0x00000002      /* 100Mb/s */
#define DM_PHYSTAT_FDX          0x00000004      /* full-duplex */
#define DM_PHYSTAT_LINK         0x00000008      /* link up */
#define DM_PHYSTAT_RXLOCK       0x00000010      /* RX-lock */
#define DM_PHYSTAT_SIGNAL       0x00000020      /* signal detection */
#define DM_PHYSTAT_UTPSIG       0x00000040      /* UTP SIG */
#define DM_PHYSTAT_GPED         0x00000080      /* general PHY reset control */
#define DM_PHYSTAT_GEPC         0x00000100      /* GPED bits control */


/* Sample Frame Access Register */
#define CSR_DM_SFAR             TULIP_CSR13


/* Sample Frame Data Register */
#define CSR_DM_SFDR             TULIP_CSR14
        /* See 21143 SIAGEN register */

/*
 * ASIX AX88140A and AX88141 registers.
 */

/* CSR13 - Filtering Index */
#define CSR_AX_FILTIDX          TULIP_CSR13

/* CSR14 - Filtering data */
#define CSR_AX_FILTDATA         TULIP_CSR14

/* Filtering Index values */
#define AX_FILTIDX_PAR0         0x00000000
#define AX_FILTIDX_PAR1         0x00000001
#define AX_FILTIDX_MAR0         0x00000002
#define AX_FILTIDX_MAR1         0x00000003

#endif /* _DEV_IC_TULIPREG_H_ */