src/devices/bus_pci.c

/*
 *  Copyright (C) 2004-2006  Anders Gavare.  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions are met:
 *
 *  1. Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *  2. Redistributions in binary form must reproduce the above copyright  
 *     notice, this list of conditions and the following disclaimer in the 
 *     documentation and/or other materials provided with the distribution.
 *  3. The name of the author may not be used to endorse or promote products
 *     derived from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 *  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 *  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE   
 *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 *  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 *  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 *  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 *  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 *  SUCH DAMAGE.
 *   
 *
 *  $Id: bus_pci.c,v 1.65 2006/05/10 03:32:32 debug Exp $
 *  
 *  Generic PCI bus framework. This is not a normal "device", but is used by
 *  individual PCI controllers and devices.
 *
 *  See NetBSD's pcidevs.h for more PCI vendor and device identifiers.
 *
 *  TODO:
 *
 *      x) Allow guest OSes to do runtime address fixups (i.e. actually
 *         move a device from one address to another).
 *
 *      x) Generalize the PCI and legacy ISA interrupt routing stuff.
 *
 *      x) Make sure that pci_little_endian is used correctly everywhere.
 */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#define BUS_PCI_C

#include "bus_pci.h"
#include "cpu.h"
#include "device.h"
#include "devices.h"
#include "diskimage.h"
#include "machine.h"
#include "memory.h"
#include "misc.h"

extern int verbose;


#ifdef UNSTABLE_DEVEL
#define debug fatal
#endif


/*
 *  bus_pci_decompose_1():
 *
 *  Helper function for decomposing Mechanism 1 tags.
 */
void bus_pci_decompose_1(uint32_t t, int *bus, int *dev, int *func, int *reg)
{
        *bus  = (t >> 16) & 0xff;
        *dev  = (t >> 11) & 0x1f;
        *func = (t >>  8) &  0x7;
        *reg  =  t        & 0xff;

        /*  Warn about unaligned register access:  */
        if (t & 3)
                fatal("[ bus_pci_decompose_1: WARNING: reg = 0x%02x ]\n",
                    t & 0xff);
}


/*
 *  bus_pci_data_access():
 *
 *  Reads from or writes to the PCI configuration registers of a device.
 */
void bus_pci_data_access(struct cpu *cpu, struct pci_data *pci_data,
        uint64_t *data, int len, int writeflag)
{
        struct pci_device *dev;
        unsigned char *cfg_base;
        uint64_t x, idata = *data;
        int i;

        /*  Scan through the list of pci_device entries.  */
        dev = pci_data->first_device;
        while (dev != NULL) {
                if (dev->bus      == pci_data->cur_bus &&
                    dev->function == pci_data->cur_func &&
                    dev->device   == pci_data->cur_device)
                        break;
                dev = dev->next;
        }

        /*  No device? Then return emptiness.  */
        if (dev == NULL) {
                if (writeflag == MEM_READ) {
                        if (pci_data->cur_reg == 0)
                                *data = -1;
                        else
                                *data = 0;
                } else {
                        fatal("[ bus_pci_data_access(): write to non-existant"
                            " device? ]\n");
                }
                return;
        }

        /*  Return normal config data, or length data?  */
        if (pci_data->last_was_write_ffffffff &&
            pci_data->cur_reg >= PCI_MAPREG_START &&
            pci_data->cur_reg <= PCI_MAPREG_END - 4)
                cfg_base = dev->cfg_mem_size;
        else
                cfg_base = dev->cfg_mem;

        /*  Read data as little-endian:  */
        x = 0;
        for (i=len-1; i>=0; i--) {
                int ofs = pci_data->cur_reg + i;
                x <<= 8;
                x |= cfg_base[ofs & (PCI_CFG_MEM_SIZE - 1)];
        }

        /*  Register write:  */
        if (writeflag == MEM_WRITE) {
                debug("[ bus_pci: write to PCI DATA: data = 0x%08llx ]\n",
                    (long long)idata);
                if (idata == 0xffffffffULL &&
                    pci_data->cur_reg >= PCI_MAPREG_START &&
                    pci_data->cur_reg <= PCI_MAPREG_END - 4) {
                        pci_data->last_was_write_ffffffff = 1;
                        return;
                }
                /*  Writes are not really supported yet:  */
                if (idata != x) {
                        debug("[ bus_pci: write to PCI DATA: data = 0x%08llx"
                            " differs from current value 0x%08llx; NOT YET"
                            " SUPPORTED. bus %i, device %i, function %i (%s)"
                            " register 0x%02x ]\n", (long long)idata,
                            (long long)x, pci_data->cur_bus,
                            pci_data->cur_device, pci_data->cur_func,
                            dev->name, pci_data->cur_reg);
                }
                return;
        }

        /*  Register read:  */
        *data = x;

        pci_data->last_was_write_ffffffff = 0;

        debug("[ bus_pci: read from PCI DATA, bus %i, device "
            "%i, function %i (%s) register 0x%02x: (len=%i) 0x%08lx ]\n",
            pci_data->cur_bus, pci_data->cur_device, pci_data->cur_func,
            dev->name, pci_data->cur_reg, len, (long)*data);
}


/*
 *  bus_pci_setaddr():
 *
 *  Sets the address in preparation for a PCI register transfer.
 */
void bus_pci_setaddr(struct cpu *cpu, struct pci_data *pci_data,
        int bus, int device, int function, int reg)
{
        if (cpu == NULL || pci_data == NULL) {
                fatal("bus_pci_setaddr(): NULL ptr\n");
                exit(1);
        }

        pci_data->cur_bus = bus;
        pci_data->cur_device = device;
        pci_data->cur_func = function;
        pci_data->cur_reg = reg;
}


/*
 *  bus_pci_add():
 *
 *  Add a PCI device to a bus_pci device.
 */
void bus_pci_add(struct machine *machine, struct pci_data *pci_data,
        struct memory *mem, int bus, int device, int function,
        const char *name)
{
        struct pci_device *pd;
        int ofs;
        void (*init)(struct machine *, struct memory *, struct pci_device *);

        if (pci_data == NULL) {
                fatal("bus_pci_add(): pci_data == NULL!\n");
                exit(1);
        }

        /*  Find the PCI device:  */
        init = pci_lookup_initf(name);

        /*  Make sure this bus/device/function number isn't already in use:  */
        pd = pci_data->first_device;
        while (pd != NULL) {
                if (pd->bus == bus && pd->device == device &&
                    pd->function == function) {
                        fatal("bus_pci_add(): (bus %i, device %i, function"
                            " %i) already in use\n", bus, device, function);
                        exit(1);
                }
                pd = pd->next;
        }

        pd = malloc(sizeof(struct pci_device));
        if (pd == NULL) {
                fprintf(stderr, "out of memory\n");
                exit(1);
        }

        memset(pd, 0, sizeof(struct pci_device));

        /*  Add the new device first in the PCI bus' chain:  */
        pd->next = pci_data->first_device;
        pci_data->first_device = pd;

        pd->pcibus   = pci_data;
        pd->name     = strdup(name);
        pd->bus      = bus;
        pd->device   = device;
        pd->function = function;

        /*
         *  Initialize with some default values:
         *
         *  TODO:  The command status register is best to set up per device.
         *  The size registers should also be set up on a per-device basis.
         */
        PCI_SET_DATA(PCI_COMMAND_STATUS_REG,
            PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE);
        for (ofs = PCI_MAPREG_START; ofs < PCI_MAPREG_END; ofs += 4)
                PCI_SET_DATA_SIZE(ofs, 0x00100000 - 1);

        if (init == NULL) {
                fatal("No init function for PCI device \"%s\"?\n", name);
                exit(1);
        }

        /*  Call the PCI device' init function:  */
        init(machine, mem, pd);
}


/*
 *  allocate_device_space():
 *
 *  Used by glue code (see below) to allocate space for a PCI device.
 *
 *  The returned values in portp and memp are the actual (emulated) addresses
 *  that the device should use. (Normally only one of these is actually used.)
 *
 *  TODO: PCI irqs?
 */
static void allocate_device_space(struct pci_device *pd,
        uint64_t portsize, uint64_t memsize,
        uint64_t *portp, uint64_t *memp)
{
        uint64_t port, mem;

        /*  Calculate an aligned starting port:  */
        port = pd->pcibus->cur_pci_portbase;
        if (portsize != 0) {
                port = ((port - 1) | (portsize - 1)) + 1;
                pd->pcibus->cur_pci_portbase = port;
                PCI_SET_DATA(PCI_MAPREG_START + pd->cur_mapreg_offset,
                    port | PCI_MAPREG_TYPE_IO);
                PCI_SET_DATA_SIZE(PCI_MAPREG_START + pd->cur_mapreg_offset,
                    ((portsize - 1) & ~0xf) | 0xd);
                pd->cur_mapreg_offset += sizeof(uint32_t);
        }

        /*  Calculate an aligned starting memory location:  */
        mem = pd->pcibus->cur_pci_membase;
        if (memsize != 0) {
                mem = ((mem - 1) | (memsize - 1)) + 1;
                pd->pcibus->cur_pci_membase = mem;
                PCI_SET_DATA(PCI_MAPREG_START + pd->cur_mapreg_offset, mem);
                PCI_SET_DATA_SIZE(PCI_MAPREG_START + pd->cur_mapreg_offset,
                    ((memsize - 1) & ~0xf) | 0x0);
                pd->cur_mapreg_offset += sizeof(uint32_t);
        }

        *portp = port + pd->pcibus->pci_actual_io_offset;
        *memp  = mem  + pd->pcibus->pci_actual_mem_offset;

        if (verbose >= 2) {
                debug("pci device '%s' at", pd->name);
                if (portsize != 0)
                        debug(" port 0x%llx-0x%llx", (long long)pd->pcibus->
                            cur_pci_portbase, (long long)(pd->pcibus->
                            cur_pci_portbase + portsize - 1));
                if (memsize != 0)
                        debug(" mem 0x%llx-0x%llx", (long long)pd->pcibus->
                            cur_pci_membase, (long long)(pd->pcibus->
                            cur_pci_membase + memsize - 1));
                debug("\n");
        }

        pd->pcibus->cur_pci_portbase += portsize;
        pd->pcibus->cur_pci_membase += memsize;
}


static void bus_pci_debug_dump__2(struct pci_device *pd)
{
        if (pd == NULL)
                return;
        bus_pci_debug_dump__2(pd->next);
        debug("bus %3i, dev %2i, func %i: %s\n",
            pd->bus, pd->device, pd->function, pd->name);
}


/*
 *  bus_pci_debug_dump():
 *
 *  Lists the attached PCI devices (in reverse).
 */
void bus_pci_debug_dump(void *extra)
{
        struct pci_data *d = (struct pci_data *) extra;
        int iadd = DEBUG_INDENTATION;

        debug("pci:\n");
        debug_indentation(iadd);

        if (d->first_device == NULL)
                debug("no devices!\n");
        else
                bus_pci_debug_dump__2(d->first_device);

        debug_indentation(-iadd);
}


/*
 *  bus_pci_init():
 *
 *  This doesn't register a device, but instead returns a pointer to a struct
 *  which should be passed to other bus_pci functions when accessing the bus.
 *
 *  irq_nr is the (optional) IRQ nr that this PCI bus interrupts at.
 *
 *  pci_portbase, pci_membase, and pci_irqbase are the port, memory, and
 *  interrupt bases for PCI devices (as found in the configuration registers).
 *
 *  pci_actual_io_offset and pci_actual_mem_offset are the offset from
 *  the values in the configuration registers to the actual (emulated) device.
 *
 *  isa_portbase, isa_membase, and isa_irqbase are the port, memory, and
 *  interrupt bases for legacy ISA devices.
 */
struct pci_data *bus_pci_init(struct machine *machine, int irq_nr,
        uint64_t pci_actual_io_offset, uint64_t pci_actual_mem_offset,
        uint64_t pci_portbase, uint64_t pci_membase, int pci_irqbase,
        uint64_t isa_portbase, uint64_t isa_membase, int isa_irqbase)
{
        struct pci_data *d;

        d = malloc(sizeof(struct pci_data));
        if (d == NULL) {
                fprintf(stderr, "out of memory\n");
                exit(1);
        }
        memset(d, 0, sizeof(struct pci_data));
        d->irq_nr                = irq_nr;
        d->pci_actual_io_offset  = pci_actual_io_offset;
        d->pci_actual_mem_offset = pci_actual_mem_offset;
        d->pci_portbase          = pci_portbase;
        d->pci_membase           = pci_membase;
        d->pci_irqbase           = pci_irqbase;
        d->isa_portbase          = isa_portbase;
        d->isa_membase           = isa_membase;
        d->isa_irqbase           = isa_irqbase;

        /*  Register the bus:  */
        machine_bus_register(machine, "pci", bus_pci_debug_dump, d);

        /*  Assume that the first 64KB could be used by legacy ISA devices:  */
        d->cur_pci_portbase = d->pci_portbase + 0x10000;
        d->cur_pci_membase  = d->pci_membase + 0x10000;

        return d;
}


/******************************************************************************
 *                                                                            *
 *  The following is glue code for PCI controllers and devices. The glue      *
 *  code does the minimal stuff necessary to get an emulated OS to detect     *
 *  the device (i.e. set up PCI configuration registers), and then if         *
 *  necessary adds a "normal" device.                                         *
 *                                                                            *
 ******************************************************************************/


/*
 *  Integraphics Systems "igsfb" Framebuffer (graphics) card.
 *
 *  TODO
 */

#define PCI_VENDOR_INTEGRAPHICS         0x10ea

PCIINIT(igsfb)
{
        PCI_SET_DATA(PCI_ID_REG,
            PCI_ID_CODE(PCI_VENDOR_INTEGRAPHICS, 0x2010));

        PCI_SET_DATA(PCI_CLASS_REG,
            PCI_CLASS_CODE(PCI_CLASS_DISPLAY,
            PCI_SUBCLASS_DISPLAY_VGA, 0) + 0x01);

        /*  TODO  */
        PCI_SET_DATA(0x10, 0x08000000);

        dev_vga_init(machine, mem, pd->pcibus->isa_membase + 0xa0000,
            0x88800000 + 0x3c0, machine->machine_name);
}


/*
 *  S3 ViRGE graphics.
 *
 *  TODO: Only emulates a standard VGA card, so far.
 */

#define PCI_VENDOR_S3                   0x5333
#define PCI_PRODUCT_S3_VIRGE            0x5631
#define PCI_PRODUCT_S3_VIRGE_DX         0x8a01

PCIINIT(s3_virge)
{
        PCI_SET_DATA(PCI_ID_REG,
            PCI_ID_CODE(PCI_VENDOR_S3, PCI_PRODUCT_S3_VIRGE_DX));

        PCI_SET_DATA(PCI_CLASS_REG,
            PCI_CLASS_CODE(PCI_CLASS_DISPLAY,
            PCI_SUBCLASS_DISPLAY_VGA, 0) + 0x01);

        dev_vga_init(machine, mem, pd->pcibus->isa_membase + 0xa0000,
            pd->pcibus->isa_portbase + 0x3c0, machine->machine_name);
}


/*
 *  Acer Labs M5229 PCI-IDE (UDMA) controller.
 *  Acer Labs M1543 PCI->ISA bridge.
 */

#define PCI_VENDOR_ALI                  0x10b9
#define PCI_PRODUCT_ALI_M1543           0x1533  /*  NOTE: not 1543  */
#define PCI_PRODUCT_ALI_M5229           0x5229

PCIINIT(ali_m1543)
{
        PCI_SET_DATA(PCI_ID_REG,
            PCI_ID_CODE(PCI_VENDOR_ALI, PCI_PRODUCT_ALI_M1543));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_ISA, 0) + 0xc3);

        PCI_SET_DATA(PCI_BHLC_REG,
            PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0));

        /*  Linux uses these to detect which IRQ the IDE controller uses:  */
        PCI_SET_DATA(0x44, 0x0000000e);
        PCI_SET_DATA(0x58, 0x00000003);
}

PCIINIT(ali_m5229)
{
        char tmpstr[300];

        PCI_SET_DATA(PCI_ID_REG,
            PCI_ID_CODE(PCI_VENDOR_ALI, PCI_PRODUCT_ALI_M5229));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE,
            PCI_SUBCLASS_MASS_STORAGE_IDE, 0x60) + 0xc1);

        if (diskimage_exist(machine, 0, DISKIMAGE_IDE) ||
            diskimage_exist(machine, 1, DISKIMAGE_IDE)) {
                snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%i",
                    (long long)(pd->pcibus->isa_portbase + 0x1f0),
                    pd->pcibus->isa_irqbase + 14);
                device_add(machine, tmpstr);
        }

        /*  The secondary channel is disabled. TODO: fix this.  */
}


/*
 *  Adaptec AHC SCSI controller.
 */

#define PCI_VENDOR_ADP  0x9004          /* Adaptec */
#define PCI_VENDOR_ADP2 0x9005          /* Adaptec (2nd PCI Vendor ID) */
#define PCI_PRODUCT_ADP_2940U   0x8178          /* AHA-2940 Ultra */
#define PCI_PRODUCT_ADP_2940UP  0x8778          /* AHA-2940 Ultra Pro */

PCIINIT(ahc)
{
        /*  Numbers taken from a Adaptec 2940U:  */
        /*  http://mail-index.netbsd.org/netbsd-bugs/2000/04/29/0000.html  */

        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_ADP,
            PCI_PRODUCT_ADP_2940U));

        PCI_SET_DATA(PCI_COMMAND_STATUS_REG, 0x02900007);

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE,
            PCI_SUBCLASS_MASS_STORAGE_SCSI, 0) + 0x01);

        PCI_SET_DATA(PCI_BHLC_REG, 0x00004008);

        /*  1 = type i/o. 0x0000e801;  address?  */
        /*  second address reg = 0xf1002000?  */
        PCI_SET_DATA(PCI_MAPREG_START + 0x00, 0x00000001);
        PCI_SET_DATA(PCI_MAPREG_START + 0x04, 0x00000000);

        PCI_SET_DATA(PCI_MAPREG_START + 0x08, 0x00000000);
        PCI_SET_DATA(PCI_MAPREG_START + 0x0c, 0x00000000);
        PCI_SET_DATA(PCI_MAPREG_START + 0x10, 0x00000000);
        PCI_SET_DATA(PCI_MAPREG_START + 0x14, 0x00000000);
        PCI_SET_DATA(PCI_MAPREG_START + 0x18, 0x00000000);

        /*  Subsystem vendor ID? 0x78819004?  */
        PCI_SET_DATA(PCI_MAPREG_START + 0x1c, 0x00000000);

        PCI_SET_DATA(0x30, 0xef000000);
        PCI_SET_DATA(PCI_CAPLISTPTR_REG, 0x000000dc);
        PCI_SET_DATA(0x38, 0x00000000);
        PCI_SET_DATA(PCI_INTERRUPT_REG, 0x08080109);    /*  interrupt pin A  */

        /*
         *  TODO:  this address is based on what NetBSD/sgimips uses
         *  on SGI IP32 (O2). Fix this!
         */

        device_add(machine, "ahc addr=0x18000000");

        /*  OpenBSD/sgi snapshots sometime between 2005-03-11 and
            2005-04-04 changed to using 0x1a000000:  */
        dev_ram_init(machine, 0x1a000000, 0x2000000, DEV_RAM_MIRROR,
            0x18000000);
}


/*
 *  Galileo Technology GT-64xxx PCI controller.
 *
 *      GT-64011        Used in Cobalt machines.
 *      GT-64120        Used in evbmips machines (Malta).
 *
 *  NOTE: This works in the opposite way compared to other devices; the PCI
 *  device is added from the normal device instead of the other way around.
 */

#define PCI_VENDOR_GALILEO           0x11ab    /* Galileo Technology */
#define PCI_PRODUCT_GALILEO_GT64011  0x4146    /* GT-64011 System Controller */
#define PCI_PRODUCT_GALILEO_GT64120  0x4620    /* GT-64120 */
#define PCI_PRODUCT_GALILEO_GT64260  0x6430    /* GT-64260 */

PCIINIT(gt64011)
{
        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_GALILEO,
            PCI_PRODUCT_GALILEO_GT64011));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_HOST, 0) + 0x01);       /*  Revision 1  */
}

PCIINIT(gt64120)
{
        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_GALILEO,
            PCI_PRODUCT_GALILEO_GT64120));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_HOST, 0) + 0x02);       /*  Revision 2?  */

        switch (machine->machine_type) {
        case MACHINE_EVBMIPS:
                PCI_SET_DATA(PCI_MAPREG_START + 0x10, 0x1be00000);
                break;
        }
}

PCIINIT(gt64260)
{
        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_GALILEO,
            PCI_PRODUCT_GALILEO_GT64260));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_HOST, 0) + 0x01);       /*  Revision 1?  */
}


/*
 *  Intel 31244   Serial ATA Controller
 *  Intel 82371SB PIIX3 PCI-ISA bridge
 *  Intel 82371AB PIIX4 PCI-ISA bridge
 *  Intel 82371SB IDE controller
 *  Intel 82371AB IDE controller
 *  Intel 82378ZB System I/O controller.
 */

#define PCI_VENDOR_INTEL                0x8086
#define PCI_PRODUCT_INTEL_31244         0x3200
#define PCI_PRODUCT_INTEL_82371SB_ISA   0x7000
#define PCI_PRODUCT_INTEL_82371SB_IDE   0x7010
#define PCI_PRODUCT_INTEL_82371AB_ISA   0x7110
#define PCI_PRODUCT_INTEL_82371AB_IDE   0x7111
#define PCI_PRODUCT_INTEL_SIO           0x0484

PCIINIT(i31244)
{
        uint64_t port, memaddr;
        int irq = 0;

        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_INTEL,
            PCI_PRODUCT_INTEL_31244));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE,
            PCI_SUBCLASS_MASS_STORAGE_IDE, 0x33) + 0x00);

        switch (machine->machine_type) {
        case MACHINE_IQ80321:
                /*  S-PCI-X slot uses PCI IRQ A, int 29  */
                irq = (1 << 8) + 29;
                break;
        default:fatal("i31244 in non-implemented machine type %i\n",
                    machine->machine_type);
                exit(1);
        }

        PCI_SET_DATA(PCI_INTERRUPT_REG, 0x01100000 | irq);

        allocate_device_space(pd, 0x1000, 0, &port, &memaddr);
        allocate_device_space(pd, 0x1000, 0, &port, &memaddr);

        /*  PCI IDE using dev_wdc:  */
        if (diskimage_exist(machine, 0, DISKIMAGE_IDE) ||
            diskimage_exist(machine, 1, DISKIMAGE_IDE)) {
                char tmpstr[150];
                snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%i",
                    (long long)(pd->pcibus->pci_actual_io_offset + 0),
                    pd->pcibus->pci_irqbase + 0);
                device_add(machine, tmpstr);
        }
}

PCIINIT(piix3_isa)
{
        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_INTEL,
            PCI_PRODUCT_INTEL_82371SB_ISA));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_ISA, 0) + 0x01);        /*  Rev 1  */

        PCI_SET_DATA(PCI_BHLC_REG,
            PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0));
}

PCIINIT(piix4_isa)
{
        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_INTEL,
            PCI_PRODUCT_INTEL_82371AB_ISA));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_ISA, 0) + 0x01);        /*  Rev 1  */

        PCI_SET_DATA(PCI_BHLC_REG,
            PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0));
}

PCIINIT(i82378zb)
{
        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_INTEL,
            PCI_PRODUCT_INTEL_SIO));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_ISA, 0) + 0x43);

        PCI_SET_DATA(PCI_BHLC_REG,
            PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0));

        PCI_SET_DATA(0x40, 0x20);

        /*  PIRQ[0]=10 PIRQ[1]=11 PIRQ[2]=14 PIRQ[3]=15  */
        PCI_SET_DATA(0x60, 0x0f0e0b0a);
}

PCIINIT(piix3_ide)
{
        char tmpstr[100];

        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_INTEL,
            PCI_PRODUCT_INTEL_82371SB_IDE));

        /*  Possibly not correct:  */
        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE,
            PCI_SUBCLASS_MASS_STORAGE_IDE, 0x00) + 0x00);

        /*  PIIX_IDETIM (see NetBSD's pciide_piix_reg.h)  */
        /*  channel 0 and 1 enabled as IDE  */
        PCI_SET_DATA(0x40, 0x80008000);

        if (diskimage_exist(machine, 0, DISKIMAGE_IDE) ||
            diskimage_exist(machine, 1, DISKIMAGE_IDE)) {
                snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%i",
                    (long long)(pd->pcibus->isa_portbase + 0x1f0),
                    pd->pcibus->isa_irqbase + 14);
                device_add(machine, tmpstr);
        }

        if (diskimage_exist(machine, 2, DISKIMAGE_IDE) ||
            diskimage_exist(machine, 3, DISKIMAGE_IDE)) {
                snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%i",
                    (long long)(pd->pcibus->isa_portbase + 0x170),
                    pd->pcibus->isa_irqbase + 15);
                device_add(machine, tmpstr);
        }
}

PCIINIT(piix4_ide)
{
        char tmpstr[100];

        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_INTEL,
            PCI_PRODUCT_INTEL_82371AB_IDE));

        /*  Possibly not correct:  */
        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE,
            PCI_SUBCLASS_MASS_STORAGE_IDE, 0x00) + 0x01);

        /*  PIIX_IDETIM (see NetBSD's pciide_piix_reg.h)  */
        /*  channel 0 and 1 enabled as IDE  */
        PCI_SET_DATA(0x40, 0x80008000);

        if (diskimage_exist(machine, 0, DISKIMAGE_IDE) ||
            diskimage_exist(machine, 1, DISKIMAGE_IDE)) {
                snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%i",
                    (long long)(pd->pcibus->isa_portbase + 0x1f0),
                    pd->pcibus->isa_irqbase + 14);
                device_add(machine, tmpstr);
        }

        if (diskimage_exist(machine, 2, DISKIMAGE_IDE) ||
            diskimage_exist(machine, 3, DISKIMAGE_IDE)) {
                snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%i",
                    (long long)(pd->pcibus->isa_portbase + 0x170),
                    pd->pcibus->isa_irqbase + 15);
                device_add(machine, tmpstr);
        }
}


/*
 *  IBM ISA bridge (used by at least one PReP machine).
 */

#define PCI_VENDOR_IBM                  0x1014
#define PCI_PRODUCT_IBM_ISABRIDGE       0x000a

PCIINIT(ibm_isa)
{
        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_IBM,
            PCI_PRODUCT_IBM_ISABRIDGE));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_ISA, 0) + 0x02);

        PCI_SET_DATA(PCI_BHLC_REG,
            PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0));
}


/*
 *  Heuricon PCI host bridge for PM/PPC.
 */

#define PCI_VENDOR_HEURICON             0x1223
#define PCI_PRODUCT_HEURICON_PMPPC      0x000e

PCIINIT(heuricon_pmppc)
{
        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_HEURICON,
            PCI_PRODUCT_HEURICON_PMPPC));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_HOST, 0) + 0x00);   /*  Revision?  */

        PCI_SET_DATA(PCI_BHLC_REG,
            PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0));
}


/*
 *  VIATECH VT82C586 devices:
 *
 *      vt82c586_isa    PCI->ISA bridge
 *      vt82c586_ide    IDE controller
 *
 *  TODO:  This more or less just a dummy device, so far.
 */

#define PCI_VENDOR_VIATECH                0x1106  /* VIA Technologies */
#define PCI_PRODUCT_VIATECH_VT82C586_IDE  0x1571  /* VT82C586 (Apollo VP)
                                                     IDE Controller */
#define PCI_PRODUCT_VIATECH_VT82C586_ISA  0x0586  /* VT82C586 (Apollo VP)
                                                     PCI-ISA Bridge */

PCIINIT(vt82c586_isa)
{
        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_VIATECH,
            PCI_PRODUCT_VIATECH_VT82C586_ISA));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_ISA, 0) + 0x39);   /*  Revision 37 or 39  */

        PCI_SET_DATA(PCI_BHLC_REG,
            PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0));
}

PCIINIT(vt82c586_ide)
{
        char tmpstr[100];

        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_VIATECH,
            PCI_PRODUCT_VIATECH_VT82C586_IDE));

        /*  Possibly not correct:  */
        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE,
            PCI_SUBCLASS_MASS_STORAGE_IDE, 0x00) + 0x01);

        /*  APO_IDECONF  */
        /*  channel 0 and 1 enabled  */
        PCI_SET_DATA(0x40, 0x00000003);

        if (diskimage_exist(machine, 0, DISKIMAGE_IDE) ||
            diskimage_exist(machine, 1, DISKIMAGE_IDE)) {
                snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%i",
                    (long long)(pd->pcibus->isa_portbase + 0x1f0),
                    pd->pcibus->isa_irqbase + 14);
                device_add(machine, tmpstr);
        }

        if (diskimage_exist(machine, 2, DISKIMAGE_IDE) ||
            diskimage_exist(machine, 3, DISKIMAGE_IDE)) {
                snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%i",
                    (long long)(pd->pcibus->isa_portbase + 0x170),
                    pd->pcibus->isa_irqbase + 15);
                device_add(machine, tmpstr);
        }
}


/*
 *  Symphony Labs 83C553 PCI->ISA bridge.
 *  Symphony Labs 82C105 PCIIDE controller.
 */

#define PCI_VENDOR_SYMPHONY             0x10ad
#define PCI_PRODUCT_SYMPHONY_83C553     0x0565
#define PCI_PRODUCT_SYMPHONY_82C105     0x0105

PCIINIT(symphony_83c553)
{
        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_SYMPHONY,
            PCI_PRODUCT_SYMPHONY_83C553));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_ISA, 0) + 0x10);

        PCI_SET_DATA(PCI_BHLC_REG,
            PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0));
}

PCIINIT(symphony_82c105)
{
        char tmpstr[100];

        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_SYMPHONY,
            PCI_PRODUCT_SYMPHONY_82C105));

        /*  Possibly not correct:  */
        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_MASS_STORAGE,
            PCI_SUBCLASS_MASS_STORAGE_IDE, 0x00) + 0x05);

        /*  APO_IDECONF  */
        /*  channel 0 and 1 enabled  */
        PCI_SET_DATA(0x40, 0x00000003);

        if (diskimage_exist(machine, 0, DISKIMAGE_IDE) ||
            diskimage_exist(machine, 1, DISKIMAGE_IDE)) {
                snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%i",
                    (long long)(pd->pcibus->isa_portbase + 0x1f0),
                    pd->pcibus->isa_irqbase + 14);
                device_add(machine, tmpstr);
        }

        if (diskimage_exist(machine, 2, DISKIMAGE_IDE) ||
            diskimage_exist(machine, 3, DISKIMAGE_IDE)) {
                snprintf(tmpstr, sizeof(tmpstr), "wdc addr=0x%llx irq=%i",
                    (long long)(pd->pcibus->isa_portbase + 0x170),
                    pd->pcibus->isa_irqbase + 15);
                device_add(machine, tmpstr);
        }
}


/*
 *  DEC 21143 ("Tulip") PCI ethernet.
 */

#define PCI_VENDOR_DEC          0x1011 /* Digital Equipment */
#define PCI_PRODUCT_DEC_21142   0x0019 /* DECchip 21142/21143 10/100 Ethernet */

PCIINIT(dec21143)
{
        uint64_t port, memaddr;
        int irq = 0;            /*  TODO  */
        int pci_int_line = 0x101;
        char tmpstr[200];

        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_DEC,
            PCI_PRODUCT_DEC_21142));

        PCI_SET_DATA(PCI_COMMAND_STATUS_REG, 0x02000017);

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_NETWORK,
            PCI_SUBCLASS_NETWORK_ETHERNET, 0x00) + 0x41);

        PCI_SET_DATA(PCI_BHLC_REG, PCI_BHLC_CODE(0,0,0, 0x40,0));

        switch (machine->machine_type) {
        case MACHINE_CATS:
                /*  CATS int 18 = PCI.  */
                irq = 18;
                pci_int_line = 0x101;
                break;
        case MACHINE_COBALT:
                /*  On Cobalt, IRQ 7 = PCI.  */
                irq = 8 + 7;
                pci_int_line = 0x407;
                break;
        case MACHINE_ALGOR:
                /*  TODO  */
                irq = 8 + 7;
                pci_int_line = 0x407;
                break;
        case MACHINE_PREP:
                irq = 32 + 10;
                pci_int_line = 0x20a;
                break;
        case MACHINE_MVMEPPC:
                /*  TODO  */
                irq = 32 + 10;
                pci_int_line = 0x40a;
                break;
        case MACHINE_PMPPC:
                /*  TODO, not working yet  */
                irq = 31 - 21;
                pci_int_line = 0x201;
                break;
        case MACHINE_MACPPC:
                /*  TODO, not working yet  */
                irq = 25;
                pci_int_line = 0x101;
                break;
        }

        PCI_SET_DATA(PCI_INTERRUPT_REG, 0x28140000 | pci_int_line);

        allocate_device_space(pd, 0x100, 0x100, &port, &memaddr);

        snprintf(tmpstr, sizeof(tmpstr), "dec21143 addr=0x%llx addr2=0x%llx "
            "irq=%i pci_little_endian=1", (long long)port, (long long)memaddr,
            irq);
        device_add(machine, tmpstr);
}


/*
 *  DEC 21030 "tga" graphics.
 */

#define PCI_PRODUCT_DEC_21030  0x0004          /*  DECchip 21030 ("TGA")  */

PCIINIT(dec21030)
{
        uint64_t base = 0;
        char tmpstr[200];

        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_DEC,
            PCI_PRODUCT_DEC_21030));

        PCI_SET_DATA(PCI_COMMAND_STATUS_REG, 0x02800087);  /*  TODO  */

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_DISPLAY,
            PCI_SUBCLASS_DISPLAY_VGA, 0x00) + 0x03);

        /*
         *  See http://mail-index.netbsd.org/port-arc/2001/08/13/0000.html
         *  for more info.
         */

        PCI_SET_DATA(PCI_BHLC_REG, 0x0000ff00);

        /*  8 = prefetchable  */
        PCI_SET_DATA(0x10, 0x00000008);
        PCI_SET_DATA(0x30, 0x08000001);
        PCI_SET_DATA(PCI_INTERRUPT_REG, 0x00000100);    /*  interrupt pin A?  */

        /*
         *  Experimental:
         *
         *  TODO: Base address, pci_little_endian, ...
         */

        switch (machine->machine_type) {
        case MACHINE_ARC:
                base = 0x100000000ULL;
                break;
        default:fatal("dec21030 in non-implemented machine type %i\n",
                    machine->machine_type);
                exit(1);
        }

        snprintf(tmpstr, sizeof(tmpstr), "dec21030 addr=0x%llx",
            (long long)(base));
        device_add(machine, tmpstr);
}


/*
 *  Motorola MPC105 "Eagle" Host Bridge
 *
 *  Used in at least PReP and BeBox.
 */

#define PCI_VENDOR_MOT                  0x1057
#define PCI_PRODUCT_MOT_MPC105          0x0001

PCIINIT(eagle)
{
        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_MOT,
            PCI_PRODUCT_MOT_MPC105));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_HOST, 0) + 0x24);

        PCI_SET_DATA(PCI_BHLC_REG,
            PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0));
}


/*
 *  Apple (MacPPC) stuff:
 *
 *  Grand Central (I/O controller)
 *  Uni-North (PCI controller)
 */

#define PCI_VENDOR_APPLE                0x106b
#define PCI_PRODUCT_APPLE_GC            0x0002
#define PCI_PRODUCT_APPLE_UNINORTH1     0x001e

PCIINIT(gc_obio)
{
        uint64_t port, memaddr;

        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_APPLE,
            PCI_PRODUCT_APPLE_GC));

        /*  TODO:  */
        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_SYSTEM,
            PCI_SUBCLASS_SYSTEM_PIC, 0) + 0x00);

        PCI_SET_DATA(PCI_BHLC_REG,
            PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0));

        /*  TODO  */
        allocate_device_space(pd, 0x10000, 0x10000, &port, &memaddr);
}

PCIINIT(uninorth)
{
        uint64_t port, memaddr;

        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_APPLE,
            PCI_PRODUCT_APPLE_UNINORTH1));

        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_BRIDGE,
            PCI_SUBCLASS_BRIDGE_HOST, 0) + 0xff);

        PCI_SET_DATA(PCI_BHLC_REG,
            PCI_BHLC_CODE(0,0, 1 /* multi-function */, 0x40,0));

        /*  TODO  */
        allocate_device_space(pd, 0x10000, 0x10000, &port, &memaddr);
}


/*
 *  ATI graphics cards
 */

#define PCI_VENDOR_ATI                  0x1002
#define PCI_PRODUCT_ATI_RADEON_9200_2   0x5962

PCIINIT(ati_radeon_9200_2)
{
        uint64_t port, memaddr;

        PCI_SET_DATA(PCI_ID_REG, PCI_ID_CODE(PCI_VENDOR_ATI,
            PCI_PRODUCT_ATI_RADEON_9200_2));

        /*  TODO: other subclass?  */
        PCI_SET_DATA(PCI_CLASS_REG, PCI_CLASS_CODE(PCI_CLASS_DISPLAY,
            PCI_SUBCLASS_DISPLAY_VGA, 0) + 0x03);

        /*  TODO  */
        allocate_device_space(pd, 0x1000, 0x400000, &port, &memaddr);
}
