upstream/0.3.4/configure

#!/bin/sh
###############################################################################
#
#  Copyright (C) 2003-2005  Anders Gavare.  All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are met:
#
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#  3. The name of the author may not be used to endorse or promote products
#     derived from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
#  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
#  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
#  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
#  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
#  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
#  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
#  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
#  SUCH DAMAGE.
#
#
#  $Id: configure,v 1.140 2005/06/27 17:31:50 debug Exp $
#
#  This is a minimal configure script, hardcoded for GXemul. This script
#  figures out which compiler flags will work, and creates Makefiles in
#  sub-directories. A config.h file is also created.
#
#
#  --->   FOR NORMAL USE, JUST RUN ./configure WITHOUT OPTIONS!
#
#
#  To compile the emulator with profiling (during development), use
#  CFLAGS="-pg", run the emulator, and then run 'gprof gxemul' and study
#  the results.
#
#
#  The main things that are detected by this script:
#
#    o)  special hacks for some OSes
#    o)  which compiler to use  (overridden by setting CC)
#    o)  which compiler flags to use  (overridden by setting CFLAGS)
#    o)  X11 flags and libraries  (TODO: should be possible to override)
#    o)  binary translation (on supported platforms)
#    o)  prefetch capability  (TODO: this is assumed on Alpha, but not all
#                              Alphas have it...)
#
#  TODO:
#    o)  do not enable prefetch on Alpha ev4 or ev5, only on pca56 and newer
#    o)  X11 libs and includes via command line options?
#
###############################################################################

ENABLEARM=YES
ENABLEMIPS=YES
ENABLEPPC=YES
ENABLEURISC=YES
ENABLEX86=NO
STABLE=NO

if [ z"$*" != z ]; then
        #  Parse command line options:
        for a in $*; do
                if [ z$a = z--disable-x ]; then
                        NOX11=YES
                else if [ z$a = z--always32 ]; then
                        ALWAYS32=YES
                else if [ z$a = z--tracenull ]; then
                        TRACENULL=YES
                else if [ z$a = z--disable-bintrans ]; then
                        NOBINTRANS=YES
                else if [ z$a = z--enable-bintrans ]; then
                        NOBINTRANS=NO
                else if [ z$a = z--disable-mips16 ]; then
                        MIPS16=NO
                else if [ z$a = z--enable-mips16 ]; then
                        MIPS16=YES
                else if [ z$a = z--disable-arm ]; then
                        ENABLEARM=NO
                else if [ z$a = z--enable-arm ]; then
                        ENABLEARM=YES
                else if [ z$a = z--disable-mips ]; then
                        ENABLEMIPS=NO
                else if [ z$a = z--enable-mips ]; then
                        ENABLEMIPS=YES
                else if [ z$a = z--disable-ppc ]; then
                        ENABLEPPC=NO
                else if [ z$a = z--enable-ppc ]; then
                        ENABLEPPC=YES
                else if [ z$a = z--disable-urisc ]; then
                        ENABLEURISC=NO
                else if [ z$a = z--enable-urisc ]; then
                        ENABLEURISC=YES
                else if [ z$a = z--disable-x86 ]; then
                        ENABLEX86=NO
                else if [ z$a = z--enable-x86 ]; then
                        ENABLEX86=YES
                else if [ z$a = z--disable-delays ]; then
                        DELAYS=NO
                else if [ z$a = z--enable-delays ]; then
                        DELAYS=YES
                else if [ z$a = z--disable-caches ]; then
                        CACHES=NO
                else if [ z$a = z--enable-caches ]; then
                        CACHES=YES
                else if [ z$a = z--help ]; then
                        echo "usage: $0 [options]"
                        printf "\nDevelopment (debug) options:\n"
                        echo "  --always32         enable" \
                            "ALWAYS_SIGNEXTEND_32 (for hunting down"
                        echo "                     32/64-bit bugs)"
                        echo "  --tracenull        enable" \
                            "TRACE_NULL_CRASHES (for bug hunting)"
                        printf "\nGeneral options:\n"
                        echo "  --disable-bintrans configure without" \
                            "bintrans, even if the host supports it"
                        printf "  --enable-caches    enable cache emulation"
                        printf " (BUGGY)\n"
                        echo "  --enable-delays    enable instruction" \
                            "latency/delay emulation"
                        echo "  --disable-x        don't include X11 support"
                        printf "\nCPU selection options:\n"
                        echo "  --disable-arm      disable ARM CPU emulation"
                        echo "  --disable-mips     disable MIPS CPU emulation"
                        echo "  --disable-ppc      disable PPC CPU emulation"
                        echo "  --disable-urisc    disable URISC CPU emulation"
                        if [ z$STABLE = zNO ]; then
                                printf "  --enable-x86       "
                                printf "enable x86 CPU emulation"
                                printf " (NOT YET)\n"
                        fi
                        printf "\nMIPS-specific options:\n"
                        printf "  --enable-mips16    enable MIPS16 instruction"
                        printf " support (NOT YET)\n\n"
                        exit
                else
                        echo "Invalid option: $a"
                        echo "Run  $0 --help  to get a list of" \
                            "available options."
                        exit
                fi; fi; fi; fi; fi; fi; fi; fi; fi; fi; fi; fi; fi; fi; fi
                fi; fi; fi; fi; fi; fi; fi
        done
fi


###############################################################################
#
#  Configure options:
#
#  This creates a config.h file, which is then included from include/misc.h.
#
###############################################################################

#  Head of config.h:
printf "/*
 *  THIS FILE IS AUTOMATICALLY CREATED BY configure!
 *  DON'T EDIT THIS FILE MANUALLY, IT WILL BE OVERWRITTEN.
 */
\n#ifndef CONFIG_H\n#define CONFIG_H\n\n" > config.h


#  Figure out if VERSION should be defined.
X=`basename \`pwd\`|cut -d \- -f 2-`
if [ z"$X" = zgxemul ]; then
        echo '/*  No VERSION defined.  */' >> config.h
else
        printf "#define VERSION \"$X\"\n" >> config.h
fi


ZZ=`echo compiled on \`uname\`/\`uname -m\`, \`date\``
printf "#define COMPILE_DATE \"$ZZ\"\n" >> config.h


#  Support for various CPU types:
if [ z$MIPS16 = zYES ]; then
        printf 'Enabling MIPS16 support.  '
        printf 'NOTE: MIPS16 support is not really working yet.\n'
        printf "#define ENABLE_MIPS16\n" >> config.h
fi
if [ z$ENABLEARM = zYES ]; then
        printf "#define ENABLE_ARM\n" >> config.h
fi
if [ z$ENABLEMIPS = zYES ]; then
        printf "#define ENABLE_MIPS\n" >> config.h
fi
if [ z$ENABLEPPC = zYES ]; then
        printf "#define ENABLE_PPC\n" >> config.h
fi
if [ z$ENABLEURISC = zYES ]; then
        printf "#define ENABLE_URISC\n" >> config.h
fi
if [ z$ENABLEX86 = zYES ]; then
        printf "#define ENABLE_X86\n" >> config.h
        if [ z$STABLE = zNO ]; then
                printf "\nWARNING: X86 emulation enabled, but it isn't really"
                printf " working yet.\n\n"
        else
                printf "Not in the stable release.\n"
                exit
        fi
fi


#  Instruction delay/latency emulation:
if [ z$DELAYS = zYES ]; then
        echo 'Enabling Instruction delay/latency emulation.'
        printf "#define ENABLE_INSTRUCTION_DELAYS\n" >> config.h
fi


#  Development option: ALWAYS_SIGNEXTEND_32
if [ z$ALWAYS32 = zYES ]; then
        echo 'Enabling ALWAYS_SIGNEXTEND_32. (NOTE:' \
            'This slows down everything.)'
        printf "#define ALWAYS_SIGNEXTEND_32\n" >> config.h
fi


#  Development option: TRACE_NULL_CRASHES
if [ z$TRACENULL = zYES ]; then
        echo 'Enabling TRACE_NULL_CRASHES. (NOTE:' \
            'This slows down the emulator.)'
        printf "#define TRACE_NULL_CRASHES\n" >> config.h
fi


#  Cache emulation:
if [ z$CACHES = zYES ]; then
        echo 'Enabling Cache emulation. (EXPERIMENTAL)'
        printf "#define ENABLE_CACHE_EMULATION\n" >> config.h

        if [ z$DELAYS != zYES ]; then
                printf 'WARNING: Cache emulation without instruction '
                printf 'delay/latency emulation\n'
                printf '         (--delays) will not produce correct '
                printf 'cache miss penalties and such.\n'
        fi

        printf "\nNOTE: Cache emulation enabled, but right now it triggers "
        printf "weird bugs in the\n      emulator. You have been warned.\n\n"
fi


###############################################################################
#
#  Special hacks for some host OSes:
#
###############################################################################

if [ z"`uname|cut -c 1-6`" = zCYGWIN ]; then
        CYGWIN=YES

        if [ z"$CC" = z ]; then
                #  Assume gcc on Cygwin (Windows) systems.
                CC=gcc
        fi
fi

if [ z"`uname`" = zHP-UX ]; then
        HPUX=YES

        if [ z$CC = z ]; then
                if [ -f /usr/local/pa64/bin/gcc ]; then
                        CC=/usr/local/pa64/bin/gcc
                fi
        fi
fi

if [ z"`uname`" = zOSF1 ]; then
        OSF1=YES
fi


###############################################################################
#
#  Create the Makefile header:
#
###############################################################################

rm -f _Makefile.header

printf "#
#  DO NOT EDIT THIS FILE! It is automagically created by
#  the configure script, based on Makefile.skel.
#\n\n" >> _Makefile.header


echo 'int main(int argc, char *argv[]) { return 0; }' > _testprog.c


#  Try to detect which C compiler to use, if CC is not set:
printf "checking which C compiler to use... "

if [ z"$CC" = z ]; then
        CC=cc

        #  Try gcc first:
        printf "#!/bin/sh\ngcc _testprog.c -o _testprog >" > _test.sh
        printf " /dev/null 2> /dev/null\n" >> _test.sh
        chmod 755 _test.sh
        ./_test.sh > /dev/null 2> /dev/null
        if [ -x _testprog ]; then
                CC=gcc
        fi
        rm -f _testprog

        #  If both gcc and cc exist, then cc might be a vendor specific
        #  compiler which produces faster code than gcc (eg on Solaris):
        printf "#!/bin/sh\ncc _testprog.c -o _testprog >" > _test.sh
        printf " /dev/null 2> /dev/null\n" >> _test.sh
        chmod 755 _test.sh
        ./_test.sh > /dev/null 2> /dev/null
        if [ -x _testprog ]; then
                CC=cc
        fi
        rm -f _testprog

        #  Try ccc (FreeBSD/Alpha):
        printf "#!/bin/sh\nccc _testprog.c -o _testprog >" > _test.sh
        printf " /dev/null 2> /dev/null\n" >> _test.sh
        chmod 755 _test.sh
        ./_test.sh > /dev/null 2> /dev/null
        if [ -x _testprog ]; then
                CC="ccc"
        fi
        rm -f _testprog

        rm -f _test.sh
fi


rm -f _testprog
printf "$CC $CFLAGS"


CCTYPE="generic"

if $CC $CFLAGS -V 2> /dev/null | grep ompaq 1> /dev/null 2> /dev/null; then
        COMPAQCC=YES
        CCTYPE="Compaq CC"
fi

if $CC $CFLAGS -V 2>&1 | grep Sun 1> /dev/null 2> /dev/null; then
        SUNCC=YES
        CCTYPE="Solaris CC"
fi

if $CC $CFLAGS -v 2>&1 | grep gcc 1> /dev/null 2> /dev/null; then
        GCCCC=YES
        CCTYPE="GNU CC"
fi

if [ z$CYGWIN = zYES ]; then
        CCTYPE="$CCTYPE (Cygwin)"
fi

echo " ($CCTYPE)"


if [ z$NOX11 = z ]; then
        printf "checking for X11 headers and libs\n"

        #  Try to compile a small X11 test program:
        printf "#include <X11/Xlib.h>
        #include <stdio.h>
        Display *dis;
        void f(void) {
                dis = XOpenDisplay(NULL);
        }
        int main(int argc, char *argv[])
        { return 0; }
        " > _test_x11.c

        XOK=0

        XINCLUDE=-I/usr/X11R6/include
        $CC $CFLAGS _test_x11.c -c -o _test_x11.o $XINCLUDE 2> /dev/null

        XLIB="-L/usr/X11R6/lib -lX11"
        $CC $CFLAGS _test_x11.o -o _test_x11 $XLIB 2> /dev/null

        if [ -x _test_x11 ]; then
                XOK=1
        fi

        rm -f _test_x11 _test_x11.o

        if [ z$XOK = z0 ]; then
                XINCLUDE=""
                $CC $CFLAGS _test_x11.c -c -o _test_x11.o \
                    $XINCLUDE 2> /dev/null

                #  -lsocket for Solaris
                XLIB="-lX11 -lsocket"
                $CC $CFLAGS _test_x11.o -o _test_x11 $XLIB 2> /dev/null

                if [ -x _test_x11 ]; then
                        XOK=1
                fi
                rm -f _test_x11 _test_x11.o
        fi

        if [ z`uname` = zNetBSD ]; then
                echo "Using NetBSD hack for X11 libs..."
                XLIB="$XLIB -Wl,-rpath,/usr/X11R6/lib"
        fi

        if [ z`uname` = zOpenBSD ]; then
                if [ z`uname -m` = zarc ]; then
                        echo "Using old OpenBSD/arc hack for X11 libs..."
                        XLIB="$XLIB -Wl,-rpath,/usr/X11R6/lib"
                fi
        fi

        if [ z$XOK = z0 ]; then
                echo "Failed to compile X11 test program." \
                    "Configuring without X11."
        else
                printf "X11 headers: $XINCLUDE\n"
                printf "X11 libraries: $XLIB\n"
                echo "XINCLUDE=$XINCLUDE" >> _Makefile.header
                echo "XLIB=$XLIB" >> _Makefile.header
                printf "#define WITH_X11\n" >> config.h
        fi

        rm -f _test_x11.c
fi


if [ z$HPUX = zYES ]; then
        CFLAGS="-D_XOPEN_SOURCE_EXTENDED $CFLAGS"
        printf "#define HPUX\n" >> config.h
fi


if [ z$OSF1 = zYES ]; then
        CFLAGS="-D_XOPEN_SOURCE=500 -D_OSF_SOURCE -D_POSIX_PII_SOCKET $CFLAGS"
fi


#  Check for weird 'alpha' define.
printf "checking for weird 'alpha' define... "
printf "#include <stdio.h>\nint main(int argc, char *argv[]){
#ifdef alpha
printf(\"1\");
#undef alpha
#ifdef alpha
printf(\"2\");
#endif
#endif
printf(\"\\\n\");return 0;}\n" > _testm.c
$CC $CFLAGS _testm.c -o _testm 2> /dev/null
if [ ! -x _testm ]; then
        printf "\nWARNING! COULD NOT COMPILE alpha define TEST"
        printf " PROGRAM AT ALL!\n"
else
        if [ z`./_testm` = z1 ]; then
                printf "yes, workaround applied\n"
                echo "#undef alpha" >> config.h
        else
                if [ z`./_testm` = z12 ]; then
                        printf "yes, but workaround not possible\n"
                        exit
                else
                        printf "no\n"
                fi
        fi
fi
rm -f _testm*


#  Check for weird 'hppa' define.
printf "checking for weird 'hppa' define... "
printf "#include <stdio.h>\nint main(int argc, char *argv[]){
#ifdef hppa
printf(\"1\");
#undef hppa
#ifdef hppa
printf(\"2\");
#endif
#endif
printf(\"\\\n\");return 0;}\n" > _testm.c
$CC $CFLAGS _testm.c -o _testm 2> /dev/null
if [ ! -x _testm ]; then
        printf "\nWARNING! COULD NOT COMPILE hppa define TEST"
        printf " PROGRAM AT ALL!\n"
else
        if [ z`./_testm` = z1 ]; then
                printf "yes, workaround applied\n"
                echo "#undef hppa" >> config.h
        else
                if [ z`./_testm` = z12 ]; then
                        printf "yes, but workaround not possible\n"
                        exit
                else
                        printf "no\n"
                fi
        fi
fi
rm -f _testm*


#  Some OSes on MIPS seems to define 'mips' to 1. (eg OpenBSD/arc)
printf "checking for weird 'mips' define... "
printf "#include <stdio.h>\nint main(int argc, char *argv[]){
#ifdef mips
printf(\"1\");
#undef mips
#ifdef mips
printf(\"2\");
#endif
#endif
printf(\"\\\n\");return 0;}\n" > _testm.c
$CC $CFLAGS _testm.c -o _testm 2> /dev/null
if [ ! -x _testm ]; then
        printf "\nWARNING! COULD NOT COMPILE mips define TEST"
        printf " PROGRAM AT ALL!\n"
else
        if [ z`./_testm` = z1 ]; then
                printf "yes, workaround applied\n"
                echo "#undef mips" >> config.h
        else
                if [ z`./_testm` = z12 ]; then
                        printf "yes, but workaround not possible\n"
                        exit
                else
                        printf "no\n"
                fi
        fi
fi
rm -f _testm*


#  Similar to the mips define check above, although I don't know if
#  any OS actually defined ppc like this.
printf "checking for weird 'ppc' define... "
printf "#include <stdio.h>\nint main(int argc, char *argv[]){
#ifdef ppc
printf(\"1\");
#undef ppc
#ifdef ppc
printf(\"2\");
#endif
#endif
printf(\"\\\n\");return 0;}\n" > _testm.c
$CC $CFLAGS _testm.c -o _testm 2> /dev/null
if [ ! -x _testm ]; then
        printf "\nWARNING! COULD NOT COMPILE ppc define TEST"
        printf " PROGRAM AT ALL!\n"
else
        if [ z`./_testm` = z1 ]; then
                printf "yes, workaround applied\n"
                echo "#undef ppc" >> config.h
        else
                if [ z`./_testm` = z12 ]; then
                        printf "yes, but workaround not possible\n"
                        exit
                else
                        printf "no\n"
                fi
        fi
fi
rm -f _testm*


#  Similar to the mips define check above, although I don't know if
#  any OS actually defined sparc like this.
printf "checking for weird 'sparc' define... "
printf "#include <stdio.h>\nint main(int argc, char *argv[]){
#ifdef sparc
printf(\"1\");
#undef sparc
#ifdef sparc
printf(\"2\");
#endif
#endif
printf(\"\\\n\");return 0;}\n" > _testm.c
$CC $CFLAGS _testm.c -o _testm 2> /dev/null
if [ ! -x _testm ]; then
        printf "\nWARNING! COULD NOT COMPILE sparc define TEST "
        printf "PROGRAM AT ALL!\n"
else
        if [ z`./_testm` = z1 ]; then
                printf "yes, workaround applied\n"
                echo "#undef sparc" >> config.h
        else
                if [ z`./_testm` = z12 ]; then
                        printf "yes, but workaround not possible\n"
                        exit
                else
                        printf "no\n"
                fi
        fi
fi
rm -f _testm*


#  CWARNINGS:
printf "checking whether -Wall can be used... "
$CC $CFLAGS _testprog.c -o _testprog -Wall 2> /dev/null
if [ -x _testprog ]; then
        printf "yes\n"
        CWARNINGS="-Wall $CWARNINGS"

        #  Compaq's compiler always seems to warn about the long long type,
        #  and unusedtop suppresses warnings about include files being
        #  included more than once.
        if [ z"$COMPAQCC" = zYES ]; then
                CWARNINGS="$CWARNINGS -msg_disable longlongtype,unusedtop"
        fi
else
        printf "no\n"
fi
rm -f _testprog


if [ z"$COMPAQCC" = zYES ]; then
        #  -O4 is possible, but is -O3 better?
        CFLAGS="-O4 $CFLAGS"
else
        if [ z"`uname`" = zSunOS ]; then
                #  "cc", the system's default compiler:
                if [ z"$SUNCC" = zYES ]; then
                        CFLAGS="-xO5 -xdepend $CFLAGS"
                fi
                printf "#define SOLARIS\n" >> config.h
                OTHERLIBS="-lsocket $OTHERLIBS"
        else
                #  gcc or something else:
                $CC $CFLAGS _testprog.c -o _testprog -O 2> /dev/null
                if [ -x _testprog ]; then
                        rm -f _testprog
                        $CC $CFLAGS _testprog.c -o _testprog -O2 2> /dev/null
                        if [ -x _testprog ]; then
                                CFLAGS="-O2 $CFLAGS"
                        else
                                CFLAGS="-O $CFLAGS"
                        fi
                fi
        fi
fi
rm -f _testprog


#  -fschedule-insns causes bugs on i386 with gcc,
#  but works OK on my alpha with ccc (compaq's cc).
if [ z"$COMPAQCC" = zYES ]; then
        printf "checking whether -fschedule-insns2 can be used... "
        $CC $CFLAGS _testprog.c -o _testprog -fschedule-insns2 2> /dev/null
        if [ -x _testprog ]; then
                CFLAGS="-fschedule-insns2 $CFLAGS"
                printf "yes\n"
        else
                printf "no\n"
        fi
        rm -f _testprog

        printf "checking whether -fschedule-insns can be used... "
        $CC $CFLAGS _testprog.c -o _testprog -fschedule-insns 2> /dev/null
        if [ -x _testprog ]; then
                CFLAGS="-fschedule-insns $CFLAGS"
                printf "yes\n"
        else
                printf "no\n"
        fi
        rm -f _testprog

#       #  -intrinsics
#       $CC $CFLAGS _testprog.c -o _testprog -intrinsics 2> /dev/null
#       if [ -x _testprog ]; then
#               CFLAGS="-intrinsics $CFLAGS"
#       fi
#       rm -f _testprog

        #  -fast
        printf "checking whether -fast can be used... "
        $CC $CFLAGS _testprog.c -o _testprog -fast 2> /dev/null
        if [ -x _testprog ]; then
                CFLAGS="-fast $CFLAGS"
                printf "yes\n"
        else
                printf "no\n"
        fi
        rm -f _testprog
fi


#  -fpeephole
printf "checking whether -fpeephole can be used... "
$CC $CFLAGS -fpeephole _testprog.c -o _testprog > _testprog.stdout 2>&1
cat _testprog.stdout >> _testprog.error
if grep peephole _testprog.error > /dev/null 2>&1; then
        printf "no\n"
else
        if [ -x _testprog ]; then
                CFLAGS="-fpeephole $CFLAGS"
                printf "yes\n"
        else
                printf "no\n"
        fi
fi
rm -f _testprog _testprog.error _testprog.stdout


#  -fomit-frame-pointer
printf "checking whether -fomit-frame-pointer can be used... "
$CC $CFLAGS -fomit-frame-pointer _testprog.c -o \
    _testprog 1> _testprog.stdout 2>&1
cat _testprog.stdout >> _testprog.error
if grep frame _testprog.error > /dev/null 2>&1; then
        printf "no\n"
else
        if [ -x _testprog ]; then
                CFLAGS="-fomit-frame-pointer $CFLAGS"
                printf "yes\n"
        else
                printf "no\n"
        fi
fi
rm -f _testprog _testprog.error _testprog.stdout


#  -lrt for nanosleep?
printf "checking whether -lrt is required for nanosleep... "
printf "#include <time.h>\n#include <stdio.h>
int main(int argc, char *argv[]){nanosleep(NULL,NULL);return 0;}\n" > _testns.c
$CC $CFLAGS _testns.c -o _testns 2> /dev/null
if [ ! -x _testns ]; then
        $CC $CFLAGS -lrt _testns.c -o _testns 2> /dev/null
        if [ ! -x _testns ]; then
                printf "WARNING! COULD NOT COMPILE WITH nanosleep AT ALL!\n"
        else
                #  -lrt for nanosleep
                OTHERLIBS="-lrt $OTHERLIBS"
                printf "yes\n"
        fi
else
        printf "no\n"
fi
rm -f _testns.c _testns


#  -lresolv for inet_pton?
printf "checking whether -lresolv is required for inet_pton... "
printf "int inet_pton(void); int main(int argc, " > _testr.c
printf "char *argv[]) { return inet_pton(); }\n" >> _testr.c
$CC $CFLAGS _testr.c -o _testr 2> /dev/null
if [ ! -x _testr ]; then
        $CC $CFLAGS _testr.c -lresolv -o _testr 2> /dev/null
        if [ ! -x _testr ]; then
                $CC $CFLAGS _testr.c -lresolv -lnsl -o _testr 2> /dev/null
                if [ ! -x _testr ]; then
                        printf "no, using inet_aton\n"
                else
                        #  -lresolv -lnsl for inet_pton
                        OTHERLIBS="-lresolv -lnsl $OTHERLIBS"
                        printf "yes (and -lnsl)\n"
                        printf "#define HAVE_INET_PTON\n" >> config.h
                fi
        else
                #  -lresolv for inet_pton
                OTHERLIBS="-lresolv $OTHERLIBS"
                printf "yes\n"
                printf "#define HAVE_INET_PTON\n" >> config.h
        fi
else
        printf "no\n"
        printf "#define HAVE_INET_PTON\n" >> config.h
fi
rm -f _testr.[co] _testr


#  -lm?
printf "checking for math libs..."
printf "#include <math.h>\nint main(int argc, char *argv[]) { " > _testr.c
printf "double x = sqrt((double)argc); return (int)x; }\n" >> _testr.c
$CC $CFLAGS _testr.c -o _testr 2> /dev/null
if [ ! -x _testr ]; then
        $CC $CFLAGS _testr.c -lm -o _testr 2> /dev/null
        if [ ! -x _testr ]; then
                $CC $CFLAGS _testr.c -lm -lcpml -o _testr 2> /dev/null
                if [ ! -x _testr ]; then
                        printf "\nWARNING! Could not compile math test "
                        printf "at all!\nContinuing anyway.\n\n"
                else
                        #  -lm AND -lcpml
                        OTHERLIBS="-lm -lcpml $OTHERLIBS"
                        printf " -lm -lcpml\n"
                fi
        else
                #  Normal -lm
                OTHERLIBS="-lm $OTHERLIBS"
                printf " -lm\n"
        fi
else
        printf " none needed\n"
fi
rm -f _testr.[co] _testr


#  strlcpy missing?
printf "checking for strlcpy... "
printf "#include <string.h>
int main(int argc, char *argv[]) { char *p; char *q; size_t x;
  x = strlcpy(p, q, 50); return 0;}\n" > _tests.c
$CC $CFLAGS _tests.c -o _tests 2> /dev/null
if [ ! -x _tests ]; then
        printf "missing, using mystrlcpy\n"
        printf "#define strlcpy mystrlcpy\n" >> config.h
        printf "#define strlcat mystrlcat\n" >> config.h
        printf "#define USE_STRLCPY_REPLACEMENTS\n" >> config.h
else
        printf "found\n"
fi
rm -f _tests.[co] _tests


#  strtoull missing?
printf "checking for strtoull... "
printf "#include <stdlib.h>
#include <limits.h>
#include <stdio.h>
int main(int argc, char *argv[]) {
  long long x = strtoull(argv[1], NULL, 0); return 0;}\n" > _tests.c
$CC $CFLAGS _tests.c -o _tests 2> /dev/null
if [ ! -x _tests ]; then
        printf "missing, using mystrtoull\n"
        printf "#define strtoull mystrtoull\n" >> config.h
else
        printf "found\n"
fi
rm -f _tests.[co] _tests


#  mkstemp missing?
printf "checking for mkstemp... "
printf "#include <unistd.h>
int main(int argc, char *argv[]) { int x; char *y = \"abc\";
x = mkstemp(y); return 0;}\n" > _tests.c
$CC $CFLAGS _tests.c -o _tests 2> /dev/null
if [ ! -x _tests ]; then
        printf "missing, using workaround\n"
        printf "#define mkstemp mymkstemp\n" >> config.h
else
        printf "found\n"
fi
rm -f _tests.[co] _tests


#  fseeko missing?
printf "checking for fseeko... "
printf "#include <stdlib.h>
#include <limits.h>
#include <stdio.h>
#include <sys/types.h>
int main(int argc, char *argv[]) { fseeko(NULL, 0, 0); return 0;}\n" > _tests.c
$CC $CFLAGS _tests.c -o _tests 2> /dev/null
if [ ! -x _tests ]; then
        printf "missing\n"
        printf "WARNING! fseeko missing from libc. Using a hack, "
        printf "which probably doesn't work.\n"
        printf "#define HACK_FSEEKO\n" >> config.h
else
        printf "found\n"
fi
rm -f _tests.[co] _tests


#  socklen_t missing?
#  (for example really old OpenBSD/arc 2.3, inside the emulator)
printf "checking for socklen_t... "
printf "#include <stdlib.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
int main(int argc, char *argv[]) { socklen_t x; return 0;}\n" > _tests.c
$CC $CFLAGS _tests.c -o _tests 2> /dev/null
if [ ! -x _tests ]; then
        printf "no, using int\n"
        CFLAGS="$CFLAGS -Dsocklen_t=int"
else
        printf "socklen_t\n"
fi
rm -f _tests.[co] _tests


#  MAP_ANON missing? (On some HP-UX systems? Use MAP_ANONYMOUS instead.)
printf "checking for MAP_ANON... "
rm -f _tests
printf "#include <stdio.h>
#include <sys/types.h>
#include <sys/mman.h>
int main(int argc, char *argv[]) { int x = MAP_ANON; return 0;}\n" > _tests.c
$CC $CFLAGS _tests.c -o _tests 2> /dev/null
if [ ! -x _tests ]; then
        printf "#include <stdio.h>
#include <sys/types.h>
#include <sys/mman.h>
int main(int argc, char *argv[])
{ int x = MAP_ANONYMOUS; return 0;}\n" > _tests.c
        $CC $CFLAGS _tests.c -o _tests 2> /dev/null
        if [ ! -x _tests ]; then
                printf "no\n\n"
                printf "WARNING! Neither MAP_ANON nor MAP_ANONYMOUS work on "
                printf "this system.\nPlease try to compile anyway, and report"
                printf " to me whether it builds/runs or not.\n\n"
                printf "#define MAP_ANON 0\n" >> config.h
                printf "#define NO_MAP_ANON\n" >> config.h
        else
                printf "using MAP_ANONYMOUS\n"
                printf "#define MAP_ANON MAP_ANONYMOUS\n" >> config.h
        fi
else
        printf "yes\n"
fi
rm -f _tests.[co] _tests


#  Check for 64-bit off_t:
printf "checking for 64-bit off_t... "
printf "#include <stdio.h>\n#include <inttypes.h>\n#include <sys/types.h>\n
int main(int argc, char *argv[]){printf(\"%%i\\\n\",
 (int)sizeof(off_t));return 0;}\n" > _testoff.c
$CC $CFLAGS _testoff.c -o _testoff 2> /dev/null
if [ ! -x _testoff ]; then
        printf "\nWARNING! COULD NOT COMPILE off_t TEST PROGRAM AT ALL!\n"
else
        if [ z`./_testoff` = z8 ]; then
                printf "yes\n"
        else
                $CC $CFLAGS -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE \
                    _testoff.c -o _testoff 2> /dev/null
                if [ ! -x _testoff ]; then
                        printf "\nWARNING! COULD NOT COMPILE off_t TEST "
                        printf "PROGRAM!\n"
                else
                        if [ z`./_testoff` = z8 ]; then
                                CFLAGS="-D_FILE_OFFSET_BITS=64 $CFLAGS"
                                CFLAGS="-D_LARGEFILE_SOURCE $CFLAGS"
                                printf "using -D_FILE_OFFSET_BITS=64"
                                printf " -D_LARGEFILE_SOURCE\n"
                        else
                                printf "NO\n"
                                printf "Warning! No 64-bit off_t. Continuing "
                                printf "anyway.\n"
                        fi
                fi
        fi
fi
rm -f _testoff.c _testoff


#  Check for u_int8_t etc:
printf "checking for u_int8_t... "
printf "#include <stdio.h>\n#include <inttypes.h>\n#include <sys/types.h>\n
int main(int argc, char *argv[]){printf(\"%%i\\\n\",
 (int)sizeof(u_int8_t));return 0;}\n" > _testuint.c
$CC $CFLAGS _testuint.c -o _testuint 2> /dev/null
if [ ! -x _testuint ]; then
        rm -f _testuint*
        printf "#include <stdio.h>\n#include <inttypes.h>
        \n#include <sys/types.h>\nint main(int argc, char *argv[])
        {printf(\"%%i\\\n\", (int)sizeof(uint8_t));return 0;}\n" > _testuint.c
        $CC $CFLAGS _testuint.c -o _testuint 2> /dev/null
        if [ ! -x _testuint ]; then
                printf "no\n\nERROR: No u_int8_t or uint8_t. Aborting\n"
                #  TODO: Automagically detect using various combinations
                #  of char, int, short, long etc.
                exit
        fi

        printf "typedef uint8_t u_int8_t;\n" >> config.h
        printf "typedef uint16_t u_int16_t;\n" >> config.h
        printf "typedef uint32_t u_int32_t;\n" >> config.h
        printf "typedef uint64_t u_int64_t;\n" >> config.h
        printf "uint8_t\n"
else
        printf "yes\n"
fi
rm -f _testuint.c _testuint


###############################################################################
#
#  Dynamic binary translation (BINTRANS):
#
###############################################################################

printf "checking for bintrans backend... "

BINTRANS=NO

if [ z$ENABLEMIPS = zNO ]; then
        printf "NO!\nTEMPORARY HACK/PROBLEM: Disabling bintrans for now,\n"
        printf "until things have stabilized.\n"
        NOBINTRANS=YES
fi

if [ z$NOBINTRANS = zYES ]; then
        printf "disabled\n"
else
        #  Alpha:
        if [ z"`uname -m`" = zalpha ]; then
                printf "#define ALPHA\n" >> config.h
                printf "#define BINTRANS\n" >> config.h
                printf "Alpha\n"
                BINTRANS=YES
        fi

        #  x86:  (all machines ending in "86" are treated as i386)
        if [ z"`uname -m|rev|cut -c1-2`" = z68 ]; then
                printf "#define I386\n" >> config.h
                printf "#define BINTRANS\n" >> config.h
                printf "i386\n"
                BINTRANS=YES
        fi

# MIPS not yet
#       #  MIPS:
#       if [ z"`uname -m`" = zmips ]; then
#               printf "#define MIPS\n" >> config.h
#               printf "#define BINTRANS\n" >> config.h
#               printf "MIPS\n"
#               BINTRANS=YES
#       fi

#       #  UltraSPARC:
#       if [ z"`uname -m`" = zsun4u ]; then
#               printf "#define SPARCV9\n" >> config.h
#               printf "#define BINTRANS\n" >> config.h
#               printf "SPARC V9\n"
#               BINTRANS=YES
#       else
#               if [ z"`uname -m`" = zsparc64 ]; then
#                       printf "#define SPARCV9\n" >> config.h
#                       printf "#define BINTRANS\n" >> config.h
#                       printf "SPARC V9\n"
#                       BINTRANS=YES
#               fi
#       fi

        if [ z$BINTRANS = zNO ]; then
                printf "not supported yet on this arch\n"
        fi
fi


###############################################################################

#  Prefetch support?
printf "checking for asm prefetch support... "
if [ z"`uname -m`" = zalpha ]; then
        rm -f _alpha_asm_test.c _alpha_asm_test
        printf 'int main(int argc, char *argv[])
         { int x; int *y = &x; asm ("ldl $31,0(%%0)" : : "g" (y));
          return 0; }\n' > _alpha_asm_test.c
        $CC $CFLAGS -O2 _alpha_asm_test.c -o _alpha_asm_test \
            > /dev/null 2> /dev/null
        if [ -x _alpha_asm_test ]; then
#               printf "#define HAVE_PREFETCH\n" >> config.h
                printf "#define PREFETCH(x) asm(\"ldl" >> config.h
                printf " \$31,0(%%0)\" : : \"g\" (x))\n" >> config.h
                echo "yes"
                PREFSUP=YES
        fi
        rm -f _alpha_asm_test.c _alpha_asm_test
fi
if [ z$PREFSUP = z ]; then
        printf "#define PREFETCH(x) { }\n" >> config.h
        echo "no"
fi


###############################################################################

INCLUDE=-Iinclude/
DINCLUDE=-I../include/

echo C compiler flags: $CFLAGS $CWARNINGS
echo Linker flags: $OTHERLIBS
echo "CWARNINGS=$CWARNINGS" >> _Makefile.header
echo "COPTIM=$CFLAGS" >> _Makefile.header
echo "INCLUDE=$INCLUDE" >> _Makefile.header
echo "DINCLUDE=$DINCLUDE" >> _Makefile.header
echo "CC=$CC" >> _Makefile.header
echo "OTHERLIBS=$OTHERLIBS" >> _Makefile.header
echo "" >> _Makefile.header


printf "Regression test setup: (not really needed to build gxemul)\n"


#  64-bit MIPS cross-compiler:

MIPS=''
if [ z$ENABLEMIPS = zYES ]; then
        printf "Checking for a GNU cross-compiler for 64-bit MIPS... "
        echo 'int f(int x) { return x; }' > _testprog.c

        for MIPS_TRY in mips64-unknown-elf mips64-elf mips-unknown-elf64; do
                printf '#!/bin/sh\n'$MIPS_TRY'-gcc _testprog.c -c\n' > _test.sh
                chmod 755 _test.sh
                rm -f _testprog.o
                ./_test.sh > /dev/null 2> /dev/null
                if [ -f _testprog.o ]; then
                        MIPS=$MIPS_TRY
                        break
                fi
                rm -f _testprog.o
        done

        if [ z$MIPS = z ]; then
                echo "none"
        else
                echo $MIPS"-gcc"
        fi
fi
rm -f _testprog* _test.sh

echo "MIPS_CC="$MIPS"-gcc -g -O2 -fno-builtin -fschedule-insns" \
    "-mips64 -mabi=64" >> _Makefile.header
echo "MIPS_AS="$MIPS"-as -mabi=64 -mips64" >> _Makefile.header
echo "MIPS_LD="$MIPS"-ld -Ttext 0xa800000000030000 -e main" \
    "--oformat=elf64-bigmips" >> _Makefile.header
echo "" >> _Makefile.header


##  PPC64 cross-assembler:
#
#PPC=''
#if [ z$ENABLEPPC = zYES ]; then
#       printf "Checking for a GNU cross-assembler for 64-bit PPC... "
#       echo 'nop' > _testprog.s
#
#       for a in ppc64 powerpc64; do
#         for b in unknown; do
#           for c in elf elf64 linux linux64 aix aix5; do
#               PPC_TRY=$a-$b-$c
#               printf '#!/bin/sh\n'$PPC_TRY'-as _testprog.s' > _test.sh
#               printf ' -o _testprog.o\n' >> _test.sh
#               chmod 755 _test.sh
#               rm -f _testprog.o
#               ./_test.sh > /dev/null 2> /dev/null
#               if [ -f _testprog.o ]; then
#                       PPC=$PPC_TRY
#                       break
#               fi
#               rm -f _testprog.o
#           done
#         done
#       done
#
#       if [ z$PPC = z ]; then
#               echo "none"
#       else
#               echo $PPC"-as"
#       fi
#fi
#rm -f _testprog* _test.sh
#
##echo "PPC_CC="$PPC"-gcc -g -O2 -fno-builtin" >> _Makefile.header
#echo "PPC_AS="$PPC"-as" >> _Makefile.header
#echo "PPC_LD="$PPC"-ld -e main" >> _Makefile.header
#echo "" >> _Makefile.header


##  SPARC64 cross-compiler:
#
#SPARC=''
#if [ z$ENABLESPARC = zYES ]; then
#       printf "Checking for a GNU cross-compiler for 64-bit SPARC... "
#       echo 'int f(int x) { return x; }' > _testprog.c
#
#       for a in sparc64; do
#         for b in unknown; do
#           for c in elf elf64; do
#               SPARC_TRY=$a-$b-$c
#               printf '#!/bin/sh\n'$SPARC_TRY'-gcc _testprog.c -c' > _test.sh
#               printf ' -o _testprog.o\n' >> _test.sh
#               chmod 755 _test.sh
#               rm -f _testprog.o
#               ./_test.sh > /dev/null 2> /dev/null
#               if [ -f _testprog.o ]; then
#                       SPARC=$SPARC_TRY
#                       break
#               fi
#               rm -f _testprog.o
#           done
#         done
#       done
#
#       if [ z$SPARC = z ]; then
#               echo "none"
#       else
#               echo $SPARC"-gcc"
#       fi
#fi
#rm -f _testprog* _test.sh
#
#echo "SPARC_CC="$SPARC"-gcc -g -O2 -fno-builtin" >> _Makefile.header
#echo "SPARC_AS="$SPARC"-as" >> _Makefile.header
#echo "SPARC_LD="$SPARC"-ld -e main" >> _Makefile.header
#echo "" >> _Makefile.header


#  Create the Makefiles:

for a in . src src/devices src/devices/fonts tests; do
        echo "creating $a/Makefile"
        touch $a/Makefile
        cat _Makefile.header > $a/Makefile
        cat $a/Makefile.skel >> $a/Makefile
done

#  Tail of config.h:
printf "\n#endif  /*  CONFIG_H  */\n" >> config.h

#  Remove temporary Makefile header:
rm -f _Makefile.header

echo Configured. You may now run make to build gxemul.