/[gxemul]/trunk/src/timer.c
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Contents of /trunk/src/timer.c

Parent Directory Parent Directory | Revision Log Revision Log


Revision 42 - (show annotations)
Mon Oct 8 16:22:32 2007 UTC (16 years, 6 months ago) by dpavlin
File MIME type: text/plain
File size: 6713 byte(s)
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1613 2007/06/15 20:11:26 debug Exp $
20070501	Continuing a little on m88k disassembly (control registers,
		more instructions).
		Adding a dummy mvme88k machine mode.
20070502	Re-adding MIPS load/store alignment exceptions.
20070503	Implementing more of the M88K disassembly code.
20070504	Adding disassembly of some more M88K load/store instructions.
		Implementing some relatively simple M88K instructions (br.n,
		xor[.u] imm, and[.u] imm).
20070505	Implementing M88K three-register and, or, xor, and jmp[.n],
		bsr[.n] including function call trace stuff.
		Applying a patch from Bruce M. Simpson which implements the
		SYSCON_BOARD_CPU_CLOCK_FREQ_ID object of the syscon call in
		the yamon PROM emulation.
20070506	Implementing M88K bb0[.n] and bb1[.n], and skeletons for
		ldcr and stcr (although no control regs are implemented yet).
20070509	Found and fixed the bug which caused Linux for QEMU_MIPS to
		stop working in 0.4.5.1: It was a faulty change to the MIPS
		'sc' and 'scd' instructions I made while going through gcc -W
		warnings on 20070428.
20070510	Updating the Linux/QEMU_MIPS section in guestoses.html to
		use mips-test-0.2.tar.gz instead of 0.1.
		A big thank you to Miod Vallat for sending me M88K manuals.
		Implementing more M88K instructions (addu, subu, div[u], mulu,
		ext[u], clr, set, cmp).
20070511	Fixing bugs in the M88K "and" and "and.u" instructions (found
		by comparing against the manual).
		Implementing more M88K instructions (mask[.u], mak, bcnd (auto-
		generated)) and some more control register details.
		Cleanup: Removing the experimental AVR emulation mode and
		corresponding devices; AVR emulation wasn't really meaningful.
		Implementing autogeneration of most M88K loads/stores. The
		rectangle drawing demo (with -O0) for M88K runs :-)
		Beginning on M88K exception handling.
		More M88K instructions: tb0, tb1, rte, sub, jsr[.n].
		Adding some skeleton MVME PROM ("BUG") emulation.
20070512	Fixing a bug in the M88K cmp instruction.
		Adding the M88K lda (scaled register) instruction.
		Fixing bugs in 64-bit (32-bit pairs) M88K loads/stores.
		Removing the unused tick_hz stuff from the machine struct.
		Implementing the M88K xmem instruction. OpenBSD/mvme88k gets
		far enough to display the Copyright banner :-)
		Implementing subu.co (guess), addu.co, addu.ci, ff0, and ff1.
		Adding a dev_mvme187, for MVME187-specific devices/registers.
		OpenBSD/mvme88k prints more boot messages. :)
20070515	Continuing on MVME187 emulation (adding more devices, beginning
		on the CMMUs, etc).
		Adding the M88K and.c, xor.c, and or.c instructions, and making
		sure that mul, div, etc cause exceptions if executed when SFD1
		is disabled.
20070517	Continuing on M88K and MVME187 emulation in general; moving
		the CMMU registers to the CPU struct, separating dev_pcc2 from
		dev_mvme187, and beginning on memory_m88k.c (BATC and PATC).
		Fixing a bug in 64-bit (32-bit pairs) M88K fast stores.
		Implementing the clock part of dev_mk48txx.
		Implementing the M88K fstcr and xcr instructions.
		Implementing m88k_cpu_tlbdump().
		Beginning on the implementation of a separate address space
		for M88K .usr loads/stores.
20070520	Removing the non-working (skeleton) Sandpoint, SonyNEWS, SHARK
		Dnard, and Zaurus machine modes.
		Experimenting with dyntrans to_be_translated read-ahead. It
		seems to give a very small performance increase for MIPS
		emulation, but a large performance degradation for SuperH. Hm.
20070522	Disabling correct SuperH ITLB emulation; it does not seem to be
		necessary in order to let SH4 guest OSes run, and it slows down
		userspace code.
		Implementing "samepage" branches for SuperH emulation, and some
		other minor speed hacks.
20070525	Continuing on M88K memory-related stuff: exceptions, memory
		transaction register contents, etc.
		Implementing the M88K subu.ci instruction.
		Removing the non-working (skeleton) Iyonix machine mode.
		OpenBSD/mvme88k reaches userland :-), starts executing
		/sbin/init's instructions, and issues a few syscalls, before
		crashing.
20070526	Fixing bugs in dev_mk48txx, so that OpenBSD/mvme88k detects
		the correct time-of-day.
		Implementing a generic IRQ controller for the test machines
		(dev_irqc), similar to a proposed patch from Petr Stepan.
		Experimenting some more with translation read-ahead.
		Adding an "expect" script for automated OpenBSD/landisk
		install regression/performance tests.
20070527	Adding a dummy mmEye (SH3) machine mode skeleton.
		FINALLY found the strange M88K bug I have been hunting: I had
		not emulated the SNIP value for exceptions occurring in
		branch delay slots correctly.
		Implementing correct exceptions for 64-bit M88K loads/stores.
		Address to symbol lookups are now disabled when M88K is
		running in usermode (because usermode addresses don't have
		anything to do with supervisor addresses).
20070531	Removing the mmEye machine mode skeleton.
20070604	Some minor code cleanup.
20070605	Moving src/useremul.c into a subdir (src/useremul/), and
		cleaning up some more legacy constructs.
		Adding -Wstrict-aliasing and -fstrict-aliasing detection to
		the configure script.
20070606	Adding a check for broken GCC on Solaris to the configure
		script. (GCC 3.4.3 on Solaris cannot handle static variables
		which are initialized to 0 or NULL. :-/)
		Removing the old (non-working) ARC emulation modes: NEC RD94,
		R94, R96, and R98, and the last traces of Olivetti M700 and
		Deskstation Tyne.
		Removing the non-working skeleton WDSC device (dev_wdsc).
20070607	Thinking about how to use the host's cc + ld at runtime to
		generate native code. (See experiments/native_cc_ld_test.i
		for an example.)
20070608	Adding a program counter sampling timer, which could be useful
		for native code generation experiments.
		The KN02_CSR_NRMMOD bit in the DECstation 5000/200 (KN02) CSR
		should always be set, to allow a 5000/200 PROM to boot.
20070609	Moving out breakpoint details from the machine struct into
		a helper struct, and removing the limit on max nr of
		breakpoints.
20070610	Moving out tick functions into a helper struct as well (which
		also gets rid of the max limit).
20070612	FINALLY figured out why Debian/DECstation stopped working when
		translation read-ahead was enabled: in src/memory_rw.c, the
		call to invalidate_code_translation was made also if the
		memory access was an instruction load (if the page was mapped
		as writable); it shouldn't be called in that case.
20070613	Implementing some more MIPS32/64 revision 2 instructions: di,
		ei, ext, dext, dextm, dextu, and ins.
20070614	Implementing an instruction combination for the NetBSD/arm
		idle loop (making the host not use any cpu if NetBSD/arm
		inside the emulator is not using any cpu).
		Increasing the nr of ARM VPH entries from 128 to 384.
20070615	Removing the ENABLE_arch stuff from the configure script, so
		that all included architectures are included in both release
		and development builds.
		Moving memory related helper functions from misc.c to memory.c.
		Adding preliminary instructions for netbooting NetBSD/pmppc to
		guestoses.html; it doesn't work yet, there are weird timeouts.
		Beginning a total rewrite of the userland emulation modes
		(removing all emulation modes, beginning from scratch with
		NetBSD/MIPS and FreeBSD/Alpha only).
20070616	After fixing a bug in the DEC21143 NIC (the TDSTAT_OWN bit was
		only cleared for the last segment when transmitting, not all
		segments), NetBSD/pmppc boots with root-on-nfs without the
		timeouts. Updating guestoses.html.
		Removing the skeleton PSP (Playstation Portable) mode.
		Moving X11-related stuff in the machine struct into a helper
		struct.
		Cleanup of out-of-memory checks, to use a new CHECK_ALLOCATION
		macro (which prints a meaningful error message).
		Adding a COMMENT to each machine and device (for automagic
		.index comment generation).
		Doing regression testing for the next release.

==============  RELEASE 0.4.6  ==============


1 /*
2 * Copyright (C) 2006-2007 Anders Gavare. All rights reserved.
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions are met:
6 *
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
12 * 3. The name of the author may not be used to endorse or promote products
13 * derived from this software without specific prior written permission.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 *
27 *
28 * $Id: timer.c,v 1.9 2007/06/15 17:02:38 debug Exp $
29 *
30 * Timer framework. This is used by emulated clocks.
31 */
32
33 #include <stdio.h>
34 #include <stdlib.h>
35 #include <signal.h>
36 #include <string.h>
37 #include <unistd.h>
38 #include <sys/time.h>
39
40 #include "misc.h"
41 #include "timer.h"
42
43
44 /* #define TEST */
45
46
47 struct timer {
48 struct timer *next;
49
50 double freq;
51 void (*timer_tick)(struct timer *timer, void *extra);
52 void *extra;
53
54 double interval;
55 double next_tick_at;
56 };
57
58 static struct timer *first_timer = NULL;
59 struct timeval timer_start_tv;
60 static double timer_freq;
61 static int timer_countdown_to_next_gettimeofday;
62 static double timer_current_time;
63 static double timer_current_time_step;
64
65 static int timer_is_running;
66
67 #define SECONDS_BETWEEN_GETTIMEOFDAY_SYNCH 1.65
68
69
70 /*
71 * timer_add():
72 *
73 * Adds a virtual timer to the list of timers.
74 *
75 * Return value is a pointer to a timer struct.
76 */
77 struct timer *timer_add(double freq, void (*timer_tick)(struct timer *timer,
78 void *extra), void *extra)
79 {
80 struct timer *newtimer;
81
82 CHECK_ALLOCATION(newtimer = malloc(sizeof(struct timer)));
83
84 if (freq <= 0.00000001)
85 freq = 0.00000001;
86
87 newtimer->freq = freq;
88 newtimer->timer_tick = timer_tick;
89 newtimer->extra = extra;
90
91 newtimer->interval = 1.0 / freq;
92 newtimer->next_tick_at = timer_current_time + newtimer->interval;
93
94 newtimer->next = first_timer;
95 first_timer = newtimer;
96
97 return newtimer;
98 }
99
100
101 /*
102 * timer_remove():
103 *
104 * Removes a virtual timer from the list of timers.
105 */
106 void timer_remove(struct timer *t)
107 {
108 struct timer *prev = NULL, *cur = first_timer;
109
110 while (cur != NULL && cur != t) {
111 prev = cur;
112 cur = cur->next;
113 }
114
115 if (cur == t) {
116 if (prev == NULL)
117 first_timer = cur->next;
118 else
119 prev->next = cur->next;
120 free(cur);
121 } else {
122 fprintf(stderr, "attempt to remove timer %p which "
123 "doesn't exist. aborting\n", t);
124 exit(1);
125 }
126 }
127
128
129 /*
130 * timer_update_frequency():
131 *
132 * Changes the frequency of an existing timer.
133 */
134 void timer_update_frequency(struct timer *t, double new_freq)
135 {
136 if (t->freq == new_freq)
137 return;
138
139 t->freq = new_freq;
140
141 if (new_freq <= 0.00000001)
142 new_freq = 0.00000001;
143
144 t->interval = 1.0 / new_freq;
145 t->next_tick_at = timer_current_time + t->interval;
146 }
147
148
149 /*
150 * timer_tick():
151 *
152 * Timer tick handler. This is where the interesting stuff happens.
153 */
154 static void timer_tick(int signal_nr)
155 {
156 struct timer *timer = first_timer;
157 struct timeval tv;
158
159 timer_current_time += timer_current_time_step;
160
161 if ((--timer_countdown_to_next_gettimeofday) < 0) {
162 gettimeofday(&tv, NULL);
163 tv.tv_sec -= timer_start_tv.tv_sec;
164 tv.tv_usec -= timer_start_tv.tv_usec;
165 if (tv.tv_usec < 0) {
166 tv.tv_usec += 1000000;
167 tv.tv_sec --;
168 }
169
170 #ifdef TIMER_DEBUG
171 /* For debugging/testing: */
172 {
173 double diff = tv.tv_usec * 0.000001 + tv.tv_sec
174 - timer_current_time;
175 printf("timer: lagging behind %f seconds\n", diff);
176 }
177 #endif
178
179 timer_current_time = tv.tv_usec * 0.000001 + tv.tv_sec;
180
181 timer_countdown_to_next_gettimeofday = timer_freq *
182 SECONDS_BETWEEN_GETTIMEOFDAY_SYNCH;
183 }
184
185 while (timer != NULL) {
186 while (timer_current_time >= timer->next_tick_at) {
187 timer->timer_tick(timer, timer->extra);
188 timer->next_tick_at += timer->interval;
189 }
190
191 timer = timer->next;
192 }
193
194 #ifdef TEST
195 printf("T"); fflush(stdout);
196 #endif
197 }
198
199
200 /*
201 * timer_start():
202 *
203 * Set the interval timer to timer_freq Hz, and install the signal handler.
204 */
205 void timer_start(void)
206 {
207 struct timer *timer = first_timer;
208 struct itimerval val;
209 struct sigaction saction;
210
211 if (timer_is_running)
212 return;
213
214 timer_is_running = 1;
215
216 gettimeofday(&timer_start_tv, NULL);
217 timer_current_time = 0.0;
218
219 /* Reset all timers: */
220 while (timer != NULL) {
221 timer->next_tick_at = timer->interval;
222 timer = timer->next;
223 }
224 val.it_interval.tv_sec = 0;
225 val.it_interval.tv_usec = 1000000.0 / timer_freq;
226 val.it_value.tv_sec = 0;
227 val.it_value.tv_usec = 1000000.0 / timer_freq;
228
229 memset(&saction, 0, sizeof(saction));
230 saction.sa_handler = timer_tick;
231
232 sigaction(SIGALRM, &saction, NULL);
233
234 setitimer(ITIMER_REAL, &val, NULL);
235 }
236
237
238 /*
239 * timer_stop():
240 *
241 * Deinstall the signal handler, and disable the interval timer.
242 */
243 void timer_stop(void)
244 {
245 struct itimerval val;
246 struct sigaction saction;
247
248 if (!timer_is_running)
249 return;
250
251 timer_is_running = 0;
252
253 val.it_interval.tv_sec = 0;
254 val.it_interval.tv_usec = 0;
255 val.it_value.tv_sec = 0;
256 val.it_value.tv_usec = 0;
257
258 setitimer(ITIMER_REAL, &val, NULL);
259
260 memset(&saction, 0, sizeof(saction));
261 saction.sa_handler = NULL;
262
263 sigaction(SIGALRM, &saction, NULL);
264 }
265
266
267 #ifdef TEST
268 static void timer_tick_test(struct timer *t, void *extra)
269 {
270 printf((char *) extra); fflush(stdout);
271 }
272 #endif
273
274
275 /*
276 * timer_init():
277 *
278 * Initialize the timer framework.
279 */
280 void timer_init(void)
281 {
282 first_timer = NULL;
283 timer_current_time = 0.0;
284 timer_is_running = 0;
285 timer_countdown_to_next_gettimeofday = 0;
286
287 timer_freq = TIMER_BASE_FREQUENCY;
288 timer_current_time_step = 1.0 / timer_freq;
289
290 #ifdef TEST
291 timer_add(0.5, timer_tick_test, "X");
292 timer_add(10.0, timer_tick_test, ".");
293 timer_add(200.0, timer_tick_test, " ");
294 timer_start();
295 while (1)
296 sleep(999999);
297 #endif
298 }
299

  ViewVC Help
Powered by ViewVC 1.1.26