This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Log of /trunk/src/net/net_ip.c

Parent Directory Parent Directory | Revision Log Revision Log

Links to HEAD: (view) (annotate)
Sticky Revision:

Revision 42 - (view) (annotate) - [select for diffs]
Modified Mon Oct 8 16:22:32 2007 UTC (12 years, 9 months ago) by dpavlin
File length: 44310 byte(s)
Diff to previous 34
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1613 2007/06/15 20:11:26 debug Exp $
20070501	Continuing a little on m88k disassembly (control registers,
		more instructions).
		Adding a dummy mvme88k machine mode.
20070502	Re-adding MIPS load/store alignment exceptions.
20070503	Implementing more of the M88K disassembly code.
20070504	Adding disassembly of some more M88K load/store instructions.
		Implementing some relatively simple M88K instructions (br.n,
		xor[.u] imm, and[.u] imm).
20070505	Implementing M88K three-register and, or, xor, and jmp[.n],
		bsr[.n] including function call trace stuff.
		Applying a patch from Bruce M. Simpson which implements the
		SYSCON_BOARD_CPU_CLOCK_FREQ_ID object of the syscon call in
		the yamon PROM emulation.
20070506	Implementing M88K bb0[.n] and bb1[.n], and skeletons for
		ldcr and stcr (although no control regs are implemented yet).
20070509	Found and fixed the bug which caused Linux for QEMU_MIPS to
		stop working in It was a faulty change to the MIPS
		'sc' and 'scd' instructions I made while going through gcc -W
		warnings on 20070428.
20070510	Updating the Linux/QEMU_MIPS section in guestoses.html to
		use mips-test-0.2.tar.gz instead of 0.1.
		A big thank you to Miod Vallat for sending me M88K manuals.
		Implementing more M88K instructions (addu, subu, div[u], mulu,
		ext[u], clr, set, cmp).
20070511	Fixing bugs in the M88K "and" and "and.u" instructions (found
		by comparing against the manual).
		Implementing more M88K instructions (mask[.u], mak, bcnd (auto-
		generated)) and some more control register details.
		Cleanup: Removing the experimental AVR emulation mode and
		corresponding devices; AVR emulation wasn't really meaningful.
		Implementing autogeneration of most M88K loads/stores. The
		rectangle drawing demo (with -O0) for M88K runs :-)
		Beginning on M88K exception handling.
		More M88K instructions: tb0, tb1, rte, sub, jsr[.n].
		Adding some skeleton MVME PROM ("BUG") emulation.
20070512	Fixing a bug in the M88K cmp instruction.
		Adding the M88K lda (scaled register) instruction.
		Fixing bugs in 64-bit (32-bit pairs) M88K loads/stores.
		Removing the unused tick_hz stuff from the machine struct.
		Implementing the M88K xmem instruction. OpenBSD/mvme88k gets
		far enough to display the Copyright banner :-)
		Implementing subu.co (guess), addu.co, addu.ci, ff0, and ff1.
		Adding a dev_mvme187, for MVME187-specific devices/registers.
		OpenBSD/mvme88k prints more boot messages. :)
20070515	Continuing on MVME187 emulation (adding more devices, beginning
		on the CMMUs, etc).
		Adding the M88K and.c, xor.c, and or.c instructions, and making
		sure that mul, div, etc cause exceptions if executed when SFD1
		is disabled.
20070517	Continuing on M88K and MVME187 emulation in general; moving
		the CMMU registers to the CPU struct, separating dev_pcc2 from
		dev_mvme187, and beginning on memory_m88k.c (BATC and PATC).
		Fixing a bug in 64-bit (32-bit pairs) M88K fast stores.
		Implementing the clock part of dev_mk48txx.
		Implementing the M88K fstcr and xcr instructions.
		Implementing m88k_cpu_tlbdump().
		Beginning on the implementation of a separate address space
		for M88K .usr loads/stores.
20070520	Removing the non-working (skeleton) Sandpoint, SonyNEWS, SHARK
		Dnard, and Zaurus machine modes.
		Experimenting with dyntrans to_be_translated read-ahead. It
		seems to give a very small performance increase for MIPS
		emulation, but a large performance degradation for SuperH. Hm.
20070522	Disabling correct SuperH ITLB emulation; it does not seem to be
		necessary in order to let SH4 guest OSes run, and it slows down
		userspace code.
		Implementing "samepage" branches for SuperH emulation, and some
		other minor speed hacks.
20070525	Continuing on M88K memory-related stuff: exceptions, memory
		transaction register contents, etc.
		Implementing the M88K subu.ci instruction.
		Removing the non-working (skeleton) Iyonix machine mode.
		OpenBSD/mvme88k reaches userland :-), starts executing
		/sbin/init's instructions, and issues a few syscalls, before
20070526	Fixing bugs in dev_mk48txx, so that OpenBSD/mvme88k detects
		the correct time-of-day.
		Implementing a generic IRQ controller for the test machines
		(dev_irqc), similar to a proposed patch from Petr Stepan.
		Experimenting some more with translation read-ahead.
		Adding an "expect" script for automated OpenBSD/landisk
		install regression/performance tests.
20070527	Adding a dummy mmEye (SH3) machine mode skeleton.
		FINALLY found the strange M88K bug I have been hunting: I had
		not emulated the SNIP value for exceptions occurring in
		branch delay slots correctly.
		Implementing correct exceptions for 64-bit M88K loads/stores.
		Address to symbol lookups are now disabled when M88K is
		running in usermode (because usermode addresses don't have
		anything to do with supervisor addresses).
20070531	Removing the mmEye machine mode skeleton.
20070604	Some minor code cleanup.
20070605	Moving src/useremul.c into a subdir (src/useremul/), and
		cleaning up some more legacy constructs.
		Adding -Wstrict-aliasing and -fstrict-aliasing detection to
		the configure script.
20070606	Adding a check for broken GCC on Solaris to the configure
		script. (GCC 3.4.3 on Solaris cannot handle static variables
		which are initialized to 0 or NULL. :-/)
		Removing the old (non-working) ARC emulation modes: NEC RD94,
		R94, R96, and R98, and the last traces of Olivetti M700 and
		Deskstation Tyne.
		Removing the non-working skeleton WDSC device (dev_wdsc).
20070607	Thinking about how to use the host's cc + ld at runtime to
		generate native code. (See experiments/native_cc_ld_test.i
		for an example.)
20070608	Adding a program counter sampling timer, which could be useful
		for native code generation experiments.
		The KN02_CSR_NRMMOD bit in the DECstation 5000/200 (KN02) CSR
		should always be set, to allow a 5000/200 PROM to boot.
20070609	Moving out breakpoint details from the machine struct into
		a helper struct, and removing the limit on max nr of
20070610	Moving out tick functions into a helper struct as well (which
		also gets rid of the max limit).
20070612	FINALLY figured out why Debian/DECstation stopped working when
		translation read-ahead was enabled: in src/memory_rw.c, the
		call to invalidate_code_translation was made also if the
		memory access was an instruction load (if the page was mapped
		as writable); it shouldn't be called in that case.
20070613	Implementing some more MIPS32/64 revision 2 instructions: di,
		ei, ext, dext, dextm, dextu, and ins.
20070614	Implementing an instruction combination for the NetBSD/arm
		idle loop (making the host not use any cpu if NetBSD/arm
		inside the emulator is not using any cpu).
		Increasing the nr of ARM VPH entries from 128 to 384.
20070615	Removing the ENABLE_arch stuff from the configure script, so
		that all included architectures are included in both release
		and development builds.
		Moving memory related helper functions from misc.c to memory.c.
		Adding preliminary instructions for netbooting NetBSD/pmppc to
		guestoses.html; it doesn't work yet, there are weird timeouts.
		Beginning a total rewrite of the userland emulation modes
		(removing all emulation modes, beginning from scratch with
		NetBSD/MIPS and FreeBSD/Alpha only).
20070616	After fixing a bug in the DEC21143 NIC (the TDSTAT_OWN bit was
		only cleared for the last segment when transmitting, not all
		segments), NetBSD/pmppc boots with root-on-nfs without the
		timeouts. Updating guestoses.html.
		Removing the skeleton PSP (Playstation Portable) mode.
		Moving X11-related stuff in the machine struct into a helper
		Cleanup of out-of-memory checks, to use a new CHECK_ALLOCATION
		macro (which prints a meaningful error message).
		Adding a COMMENT to each machine and device (for automagic
		.index comment generation).
		Doing regression testing for the next release.

==============  RELEASE 0.4.6  ==============

Revision 34 - (view) (annotate) - [select for diffs]
Modified Mon Oct 8 16:21:17 2007 UTC (12 years, 9 months ago) by dpavlin
File length: 44463 byte(s)
Diff to previous 32
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1480 2007/02/19 01:34:42 debug Exp $
20061029	Changing usleep(1) calls in the debugger to usleep(10000)
20061107	Adding a new disk image option (-d o...) which sets the ISO9660
		filesystem base offset; also making some other hacks to allow
		NetBSD/dreamcast and homebrew demos/games to boot directly
		from a filesystem image.
		Moving Dreamcast-specific stuff in the documentation to its
		own page (dreamcast.html).
		Adding a border to the Dreamcast PVR framebuffer.
20061108	Adding a -T command line option (again?), for halting the
		emulator on unimplemented memory accesses.
20061109	Continuing on various SH4 and Dreamcast related things.
		The emulator should now halt on more unimplemented device
		accesses, instead of just printing a warning, forcing me to
		actually implement missing stuff :)
20061111	Continuing on SH4 and Dreamcast stuff.
		Adding a bogus Landisk (SH4) machine mode.
20061112	Implementing some parts of the Dreamcast GDROM device. With
		some ugly hacks, NetBSD can (barely) mount an ISO image.
20061113	NetBSD/dreamcast now starts booting from the Live CD image,
		but crashes randomly quite early on in the boot process.
20061122	Beginning on a skeleton interrupt.h and interrupt.c for the
		new interrupt subsystem.
20061124	Continuing on the new interrupt system; taking the first steps
		to attempt to connect CPUs (SuperH and MIPS) and devices
		(dev_cons and SH4 timer interrupts) to it. Many things will
		probably break from now on.
20061125	Converting dev_ns16550, dev_8253 to the new interrupt system.
		Attempting to begin to convert the ISA bus.
20061130	Incorporating a patch from Brian Foley for the configure
		script, which checks for X11 libs in /usr/X11R6/lib64 (which
		is used on some Linux systems).
20061227	Adding a note in the man page about booting from Dreamcast
		CDROM images (i.e. that no external kernel is needed).
20061229	Continuing on the interrupt system rewrite: beginning to
		convert more devices, adding abort() calls for legacy interrupt
		system calls so that everything now _has_ to be rewritten!
		Almost all machine modes are now completely broken.
20061230	More progress on removing old interrupt code, mostly related
		to the ISA bus + devices, the LCA bus (on AlphaBook1), and
		the Footbridge bus (for CATS). And some minor PCI stuff.
		Connecting the ARM cpu to the new interrupt system.
		The CATS, NetWinder, and QEMU_MIPS machine modes now work with
		the new interrupt system :)
20061231	Connecting PowerPC CPUs to the new interrupt system.
		Making PReP machines (IBM 6050) work again.
		Beginning to convert the GT PCI controller (for e.g. Malta
		and Cobalt emulation). Some things work, but not everything.
		Updating Copyright notices for 2007.
20070101	Converting dev_kn02 from legacy style to devinit; the 3max
		machine mode now works with the new interrupt system :-]
20070105	Beginning to convert the SGI O2 machine to the new interrupt
		system; finally converting O2 (IP32) devices to devinit, etc.
20070106	Continuing on the interrupt system redesign/rewrite; KN01
		(PMAX), KN230, and Dreamcast ASIC interrupts should work again,
		moving out stuff from machine.h and devices.h into the
		corresponding devices, beginning the rewrite of i80321
		interrupts, etc.
20070107	Beginning on the rewrite of Eagle interrupt stuff (PReP, etc).
20070117	Beginning the rewrite of Algor (V3) interrupts (finally
		changing dev_v3 into devinit style).
20070118	Removing the "bus" registry concept from machine.h, because
		it was practically meaningless.
		Continuing on the rewrite of Algor V3 ISA interrupts.
20070121	More work on Algor interrupts; they are now working again,
		well enough to run NetBSD/algor. :-)
20070122	Converting VR41xx (HPCmips) interrupts. NetBSD/hpcmips
		can be installed using the new interrupt system :-)
20070123	Making the testmips mode work with the new interrupt system.
20070127	Beginning to convert DEC5800 devices to devinit, and to the
		new interrupt system.
		Converting Playstation 2 devices to devinit, and converting
		the interrupt system. Also fixing a severe bug: the interrupt
		mask register on Playstation 2 is bitwise _toggled_ on writes.
20070128	Removing the dummy NetGear machine mode and the 8250 device
		(which was only used by the NetGear machine).
		Beginning to convert the MacPPC GC (Grand Central) interrupt
		controller to the new interrupt system.
		Converting Jazz interrupts (PICA61 etc.) to the new interrupt
		system. NetBSD/arc can be installed again :-)
		Fixing the JAZZ timer (hardcoding it at 100 Hz, works with
		NetBSD and it is better than a completely dummy timer as it
		was before).
		Converting dev_mp to the new interrupt system, although I
		haven't had time to actually test it yet.
		Completely removing src/machines/interrupts.c, cpu_interrupt
		and cpu_interrupt_ack in src/cpu.c, and
		src/include/machine_interrupts.h! Adding fatal error messages
		+ abort() in the few places that are left to fix.
		Converting dev_z8530 to the new interrupt system.
		FINALLY removing the md_int struct completely from the
		machine struct.
		SH4 fixes (adding a PADDR invalidation in the ITLB replacement
		code in memory_sh.c); the NetBSD/dreamcast LiveCD now runs
		all the way to the login prompt, and can be interacted with :-)
		Converting the CPC700 controller (PCI and interrupt controller
		for PM/PPC) to the new interrupt system.
20070129	Fixing MACE ISA interrupts (SGI IP32 emulation). Both NetBSD/
		sgimips' and OpenBSD/sgi's ramdisk kernels can now be
		interacted with again.
20070130	Moving out the MIPS multi_lw and _sw instruction combinations
		so that they are auto-generated at compile time instead.
20070131	Adding detection of amd64/x86_64 hosts in the configure script,
		for doing initial experiments (again :-) with native code
		Adding a -k command line option to set the size of the dyntrans
		cache, and a -B command line option to disable native code
		generation, even if GXemul was compiled with support for
		native code generation for the specific host CPU architecture.
20070201	Experimenting with a skeleton for native code generation.
		Changing the default behaviour, so that native code generation
		is now disabled by default, and has to be enabled by using
		-b on the command line.
20070202	Continuing the native code generation experiments.
		Making PCI interrupts work for Footbridge again.
20070203	More native code generation experiments.
		Removing most of the native code generation experimental code,
		it does not make sense to include any quick hacks like this.
		Minor cleanup/removal of some more legacy MIPS interrupt code.
20070204	Making i80321 interrupts work again (for NetBSD/evbarm etc.),
		and fixing the timer at 100 Hz.
20070206	Experimenting with removing the wdc interrupt slowness hack.
20070207	Lowering the number of dyntrans TLB entries for MIPS from
		192 to 128, resulting in a minor speed improvement.
		Minor optimization to the code invalidation routine in
20070208	Increasing (experimentally) the nr of dyntrans instructions per
		loop from 60 to 120.
20070210	Commenting out (experimentally) the dyntrans_device_danger
		detection in memory_rw.c.
		Changing the testmips and baremips machines to use a revision 2
		MIPS64 CPU by default, instead of revision 1.
		Removing the dummy i960, IA64, x86, AVR32, and HP PA-RISC
		files, the PC bios emulation, and the Olivetti M700 (ARC) and
		db64360 emulation modes.
20070211	Adding an "mp" demo to the demos directory, which tests the
		SMP functionality of the testmips machine.
		Fixing PReP interrupts some more. NetBSD/prep now boots again.
20070216	Adding a "nop workaround" for booting Mach/PMAX to the
		documentation; thanks to Artur Bujdoso for the values.
		Converting more of the MacPPC interrupt stuff to the new
		Beginning to convert BeBox interrupts to the new system.
		PPC603e should NOT have the PPC_NO_DEC flag! Removing it.
		Correcting BeBox clock speed (it was set to 100 in the NetBSD
		bootinfo block, but should be 33000000/4), allowing NetBSD
		to start without using the (incorrect) PPC_NO_DEC hack.
20070217	Implementing (slow) AltiVec vector loads and stores, allowing
		NetBSD/macppc to finally boot using the GENERIC kernel :-)
		Updating the documentation with install instructions for
20070218-19	Regression testing for the release.

==============  RELEASE 0.4.4  ==============

Revision 32 - (view) (annotate) - [select for diffs]
Added Mon Oct 8 16:20:58 2007 UTC (12 years, 9 months ago) by dpavlin
File length: 44463 byte(s)
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1421 2006/11/06 05:32:37 debug Exp $
20060816	Adding a framework for emulated/virtual timers (src/timer.c),
		using only setitimer().
		Rewriting the mc146818 to use the new timer framework.
20060817	Adding a call to gettimeofday() every now and then (once every
		second, at the moment) to resynch the timer if it drifts.
		Beginning to convert the ISA timer interrupt mechanism (8253
		and 8259) to use the new timer framework.
		Removing the -I command line option.
20060819	Adding the -I command line option again, with new semantics.
		Working on Footbridge timer interrupts; NetBSD/NetWinder and
		NetBSD/CATS now run at correct speed, but unfortunately with
		HUGE delays during bootup.
20060821	Some minor m68k updates. Adding the first instruction: nop. :)
		Minor Alpha emulation updates.
20060822	Adding a FreeBSD development specific YAMON environment
		variable ("khz") (as suggested by Bruce M. Simpson).
		Moving YAMON environment variable initialization from
		machine_evbmips.c into promemul/yamon.c, and adding some more
		Continuing on the LCA PCI bus controller (for Alpha machines).
20060823	Continuing on the timer stuff: experimenting with MIPS count/
		compare interrupts connected to the timer framework.
20060825	Adding bogus SCSI commands 0x51 (SCSICDROM_READ_DISCINFO) and
		0x52 (SCSICDROM_READ_TRACKINFO) to the SCSI emulation layer,
		to allow NetBSD/pmax 4.0_BETA to be installed from CDROM.
		Minor updates to the LCA PCI controller.
20060827	Implementing a CHIP8 cpu mode, and a corresponding CHIP8
		machine, for fun. Disassembly support for all instructions,
		and most of the common instructions have been implemented: mvi,
		mov_imm, add_imm, jmp, rand, cls, sprite, skeq_imm, jsr,
		skne_imm, bcd, rts, ldr, str, mov, or, and, xor, add, sub,
		font, ssound, sdelay, gdelay, bogus skup/skpr, skeq, skne.
20060828	Beginning to convert the CHIP8 cpu in the CHIP8 machine to a
		(more correct) RCA 180x cpu. (Disassembly for all 1802
		instructions has been implemented, but no execution yet, and
		no 1805 extended instructions.)
20060829	Minor Alpha emulation updates.
20060830	Beginning to experiment a little with PCI IDE for SGI O2.
		Fixing the cursor key mappings for MobilePro 770 emulation.
		Fixing the LK201 warning caused by recent NetBSD/pmax.
		The MIPS R41xx standby, suspend, and hibernate instructions now
		behave like the RM52xx/MIPS32/MIPS64 wait instruction.
		Fixing dev_wdc so it calculates correct (64-bit) offsets before
		giving them to diskimage_access().
20060831	Continuing on Alpha emulation (OSF1 PALcode).
20060901	Minor Alpha updates; beginning on virtual memory pagetables.
		Removed the limit for max nr of devices (in preparation for
		allowing devices' base addresses to be changed during runtime).
		Adding a hack for MIPS [d]mfc0 select 0 (except the count
		register), so that the coproc register is simply copied.
		The MIPS suspend instruction now exits the emulator, instead
		of being treated as a wait instruction (this causes NetBSD/
		hpcmips to get correct 'halt' behavior).
		The VR41xx RTC now returns correct time.
		Connecting the VR41xx timer to the timer framework (fixed at
		128 Hz, for now).
		Continuing on SPARC emulation, adding more instructions:
		restore, ba_xcc, ble. The rectangle drawing demo works :)
		Removing the last traces of the old ENABLE_CACHE_EMULATION
		MIPS stuff (not usable with dyntrans anyway).
20060902	Splitting up src/net.c into several smaller files in its own
		subdirectory (src/net/).
20060903	Cleanup of the files in src/net/, to make them less ugly.
20060904	Continuing on the 'settings' subsystem.
		Minor progress on the SPARC emulation mode.
20060905	Cleanup of various things, and connecting the settings
		infrastructure to various subsystems (emul, machine, cpu, etc).
		Changing the lk201 mouse update routine to not rely on any
		emulated hardware framebuffer cursor coordinates, but instead
		always do (semi-usable) relative movements.
20060906	Continuing on the lk201 mouse stuff. Mouse behaviour with
		multiple framebuffers (which was working in Ultrix) is now
		semi-broken (but it still works, in a way).
		Moving the documentation about networking into its own file
		(networking.html), and refreshing it a bit. Adding an example
		of how to use ethernet frame direct-access (udp_snoop).
20060907	Continuing on the settings infrastructure.
20060908	Minor updates to SH emulation: for 32-bit emulation: delay
		slots and the 'jsr @Rn' instruction. I'm putting 64-bit SH5 on
		ice, for now.
20060909-10	Implementing some more 32-bit SH instructions. Removing the
		64-bit mode completely. Enough has now been implemented to run
		the rectangle drawing demo. :-)
20060912	Adding more SH instructions.
20060916	Continuing on SH emulation (some more instructions: div0u,
		div1, rotcl/rotcr, more mov instructions, dt, braf, sets, sett,
		tst_imm, dmuls.l, subc, ldc_rm_vbr, movt, clrt, clrs, clrmac).
		Continuing on the settings subsystem (beginning on reading/
		writing settings, removing bugs, and connecting more cpus to
		the framework).
20060919	More work on SH emulation; adding an ldc banked instruction,
		and attaching a 640x480 framebuffer to the Dreamcast machine
		mode (NetBSD/dreamcast prints the NetBSD copyright banner :-),
		and then panics).
20060920	Continuing on the settings subsystem.
20060921	Fixing the Footbridge timer stuff so that NetBSD/cats and
		NetBSD/netwinder boot up without the delays.
20060922	Temporarily hardcoding MIPS timer interrupt to 100 Hz. With
		'wait' support disabled, NetBSD/malta and Linux/malta run at
		correct speed.
20060923	Connecting dev_gt to the timer framework, so that NetBSD/cobalt
		runs at correct speed.
		Moving SH4-specific memory mapped registers into its own
		device (dev_sh4.c).
		Running with -N now prints "idling" instead of bogus nr of
		instrs/second (which isn't valid anyway) while idling.
20060924	Algor emulation should now run at correct speed.
		Adding disassembly support for some MIPS64 revision 2
		instructions: ext, dext, dextm, dextu.
20060926	The timer framework now works also when the MIPS wait
		instruction is used.
20060928	Re-implementing checks for coprocessor availability for MIPS
		cop0 instructions. (Thanks to Carl van Schaik for noticing the
		lack of cop0 availability checks.)
20060929	Implementing an instruction combination hack which treats
		NetBSD/pmax' idle loop as a wait-like instruction.
20060930	The ENTRYHI_R_MASK was missing in (at least) memory_mips_v2p.c,
		causing TLB lookups to sometimes succeed when they should have
		failed. (A big thank you to Juli Mallett for noticing the
		Adding disassembly support for more MIPS64 revision 2 opcodes
		(seb, seh, wsbh, jalr.hb, jr.hb, synci, ins, dins, dinsu,
		dinsm, dsbh, dshd, ror, dror, rorv, drorv, dror32). Also
		implementing seb, seh, dsbh, dshd, and wsbh.
		Implementing an instruction combination hack for Linux/pmax'
		idle loop, similar to the NetBSD/pmax case.
20061001	Changing the NetBSD/sgimips install instructions to extract
		files from an iso image, instead of downloading them via ftp.
20061002	More-than-31-bit userland addresses in memory_mips_v2p.c were
		not actually working; applying a fix from Carl van Schaik to
		enable them to work + making some other updates (adding kuseg
		Fixing hpcmips (vr41xx) timer initialization.
		Experimenting with O(n)->O(1) reduction in the MIPS TLB lookup
		loop. Seems to work both for R3000 and non-R3000.
20061003	Continuing a little on SH emulation (adding more control
		registers; mini-cleanup of memory_sh.c).
20061004	Beginning on a dev_rtc, a clock/timer device for the test
		machines; also adding a demo, and some documentation.
		Fixing a bug in SH "mov.w @(disp,pc),Rn" (the result wasn't
		sign-extended), and adding the addc and ldtlb instructions.
20061005	Contining on SH emulation: virtual to physical address
		translation, and a skeleton exception mechanism.
20061006	Adding more SH instructions (various loads and stores, rte,
		negc, muls.w, various privileged register-move instructions).
20061007	More SH instructions: various move instructions, trapa, div0s,
		float, fdiv, ftrc.
		Continuing on dev_rtc; removing the rtc demo.
20061008	Adding a dummy Dreamcast PROM module. (Homebrew Dreamcast
		programs using KOS libs need this.)
		Adding more SH instructions: "stc vbr,rn", rotl, rotr, fsca,
		fmul, fadd, various floating-point moves, etc. A 256-byte
		demo for Dreamcast runs :-)
20061012	Adding the SH "lds Rm,pr" and bsr instructions.
20061013	More SH instructions: "sts fpscr,rn", tas.b, and some more
		floating point instructions, cmp/str, and more moves.
		Adding a dummy dev_pvr (Dreamcast graphics controller).
20061014	Generalizing the expression evaluator (used in the built-in
		debugger) to support parentheses and +-*/%^&|.
20061015	Removing the experimental tlb index hint code in
		mips_memory_v2p.c, since it didn't really have any effect.
20061017	Minor SH updates; adding the "sts pr,Rn", fcmp/gt, fneg,
		frchg, and some other instructions. Fixing missing sign-
		extension in an 8-bit load instruction.
20061019	Adding a simple dev_dreamcast_rtc.
		Implementing memory-mapped access to the SH ITLB/UTLB arrays.
20061021	Continuing on various SH and Dreamcast things: sh4 timers,
		debug messages for dev_pvr, fixing some virtual address
		translation bugs, adding the bsrf instruction.
		The NetBSD/dreamcast GENERIC_MD kernel now reaches userland :)
		Adding a dummy dev_dreamcast_asic.c (not really useful yet).
		Implementing simple support for Store Queues.
		Beginning on the PVR Tile Accelerator.
20061022	Generalizing the PVR framebuffer to support off-screen drawing,
		multiple bit-depths, etc. (A small speed penalty, but most
		likely worth it.)
		Adding more SH instructions (mulu.w, fcmp/eq, fsub, fmac,
		fschg, and some more); correcting bugs in "fsca" and "float".
20061024	Adding the SH ftrv (matrix * vector) instruction. Marcus
		Comstedt's "tatest" example runs :) (wireframe only).
		Correcting disassembly for SH floating point instructions that
		use the xd* registers.
		Adding the SH fsts instruction.
		In memory_device_dyntrans_access(), only the currently used
		range is now invalidated, and not the entire device range.
20061025	Adding a dummy AVR32 cpu mode skeleton.
20061026	Various Dreamcast updates; beginning on a Maple bus controller.
20061027	Continuing on the Maple bus. A bogus Controller, Keyboard, and
		Mouse can now be detected by NetBSD and KOS homebrew programs.
		Cleaning up the SH4 Timer Management Unit, and beginning on
		SH4 interrupts.
		Implementing the Dreamcast SYSASIC.
20061028	Continuing on the SYSASIC.
		Adding the SH fsqrt instruction.
		memory_sh.c now actually scans the ITLB.
		Fixing a bug in dev_sh4.c, related to associative writes into
		the memory-mapped UTLB array. NetBSD/dreamcast now reaches
		userland stably, and prints the "Terminal type?" message :-]
		Implementing enough of the Dreamcast keyboard to make NetBSD
		accept it for input.
		Enabling SuperH for stable (non-development) builds.
		Adding NetBSD/dreamcast to the documentation, although it
		doesn't support root-on-nfs yet.
20061029	Changing usleep(1) calls in the debugger to to usleep(10000)
		(according to Brian Foley, this makes GXemul run better on
		MacOS X).
		Making the Maple "Controller" do something (enough to barely
		interact with dcircus.elf).
20061030-31	Some progress on the PVR. More test programs start running (but
		with strange output).
		Various other SH4-related updates.
20061102	Various Dreamcast and SH4 updates; more KOS demos run now.
20061104	Adding a skeleton dev_mb8696x.c (the Dreamcast's LAN adapter).
20061105	Continuing on the MB8696x; NetBSD/dreamcast detects it as mbe0.
		Testing for the release.

==============  RELEASE 0.4.3  ==============

This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.

  Diffs between and
  Type of Diff should be a

  ViewVC Help
Powered by ViewVC 1.1.26