Parent Directory | Revision Log
Links to HEAD: | (view) (annotate) |
Sticky Revision: |
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1613 2007/06/15 20:11:26 debug Exp $ 20070501 Continuing a little on m88k disassembly (control registers, more instructions). Adding a dummy mvme88k machine mode. 20070502 Re-adding MIPS load/store alignment exceptions. 20070503 Implementing more of the M88K disassembly code. 20070504 Adding disassembly of some more M88K load/store instructions. Implementing some relatively simple M88K instructions (br.n, xor[.u] imm, and[.u] imm). 20070505 Implementing M88K three-register and, or, xor, and jmp[.n], bsr[.n] including function call trace stuff. Applying a patch from Bruce M. Simpson which implements the SYSCON_BOARD_CPU_CLOCK_FREQ_ID object of the syscon call in the yamon PROM emulation. 20070506 Implementing M88K bb0[.n] and bb1[.n], and skeletons for ldcr and stcr (although no control regs are implemented yet). 20070509 Found and fixed the bug which caused Linux for QEMU_MIPS to stop working in 0.4.5.1: It was a faulty change to the MIPS 'sc' and 'scd' instructions I made while going through gcc -W warnings on 20070428. 20070510 Updating the Linux/QEMU_MIPS section in guestoses.html to use mips-test-0.2.tar.gz instead of 0.1. A big thank you to Miod Vallat for sending me M88K manuals. Implementing more M88K instructions (addu, subu, div[u], mulu, ext[u], clr, set, cmp). 20070511 Fixing bugs in the M88K "and" and "and.u" instructions (found by comparing against the manual). Implementing more M88K instructions (mask[.u], mak, bcnd (auto- generated)) and some more control register details. Cleanup: Removing the experimental AVR emulation mode and corresponding devices; AVR emulation wasn't really meaningful. Implementing autogeneration of most M88K loads/stores. The rectangle drawing demo (with -O0) for M88K runs :-) Beginning on M88K exception handling. More M88K instructions: tb0, tb1, rte, sub, jsr[.n]. Adding some skeleton MVME PROM ("BUG") emulation. 20070512 Fixing a bug in the M88K cmp instruction. Adding the M88K lda (scaled register) instruction. Fixing bugs in 64-bit (32-bit pairs) M88K loads/stores. Removing the unused tick_hz stuff from the machine struct. Implementing the M88K xmem instruction. OpenBSD/mvme88k gets far enough to display the Copyright banner :-) Implementing subu.co (guess), addu.co, addu.ci, ff0, and ff1. Adding a dev_mvme187, for MVME187-specific devices/registers. OpenBSD/mvme88k prints more boot messages. :) 20070515 Continuing on MVME187 emulation (adding more devices, beginning on the CMMUs, etc). Adding the M88K and.c, xor.c, and or.c instructions, and making sure that mul, div, etc cause exceptions if executed when SFD1 is disabled. 20070517 Continuing on M88K and MVME187 emulation in general; moving the CMMU registers to the CPU struct, separating dev_pcc2 from dev_mvme187, and beginning on memory_m88k.c (BATC and PATC). Fixing a bug in 64-bit (32-bit pairs) M88K fast stores. Implementing the clock part of dev_mk48txx. Implementing the M88K fstcr and xcr instructions. Implementing m88k_cpu_tlbdump(). Beginning on the implementation of a separate address space for M88K .usr loads/stores. 20070520 Removing the non-working (skeleton) Sandpoint, SonyNEWS, SHARK Dnard, and Zaurus machine modes. Experimenting with dyntrans to_be_translated read-ahead. It seems to give a very small performance increase for MIPS emulation, but a large performance degradation for SuperH. Hm. 20070522 Disabling correct SuperH ITLB emulation; it does not seem to be necessary in order to let SH4 guest OSes run, and it slows down userspace code. Implementing "samepage" branches for SuperH emulation, and some other minor speed hacks. 20070525 Continuing on M88K memory-related stuff: exceptions, memory transaction register contents, etc. Implementing the M88K subu.ci instruction. Removing the non-working (skeleton) Iyonix machine mode. OpenBSD/mvme88k reaches userland :-), starts executing /sbin/init's instructions, and issues a few syscalls, before crashing. 20070526 Fixing bugs in dev_mk48txx, so that OpenBSD/mvme88k detects the correct time-of-day. Implementing a generic IRQ controller for the test machines (dev_irqc), similar to a proposed patch from Petr Stepan. Experimenting some more with translation read-ahead. Adding an "expect" script for automated OpenBSD/landisk install regression/performance tests. 20070527 Adding a dummy mmEye (SH3) machine mode skeleton. FINALLY found the strange M88K bug I have been hunting: I had not emulated the SNIP value for exceptions occurring in branch delay slots correctly. Implementing correct exceptions for 64-bit M88K loads/stores. Address to symbol lookups are now disabled when M88K is running in usermode (because usermode addresses don't have anything to do with supervisor addresses). 20070531 Removing the mmEye machine mode skeleton. 20070604 Some minor code cleanup. 20070605 Moving src/useremul.c into a subdir (src/useremul/), and cleaning up some more legacy constructs. Adding -Wstrict-aliasing and -fstrict-aliasing detection to the configure script. 20070606 Adding a check for broken GCC on Solaris to the configure script. (GCC 3.4.3 on Solaris cannot handle static variables which are initialized to 0 or NULL. :-/) Removing the old (non-working) ARC emulation modes: NEC RD94, R94, R96, and R98, and the last traces of Olivetti M700 and Deskstation Tyne. Removing the non-working skeleton WDSC device (dev_wdsc). 20070607 Thinking about how to use the host's cc + ld at runtime to generate native code. (See experiments/native_cc_ld_test.i for an example.) 20070608 Adding a program counter sampling timer, which could be useful for native code generation experiments. The KN02_CSR_NRMMOD bit in the DECstation 5000/200 (KN02) CSR should always be set, to allow a 5000/200 PROM to boot. 20070609 Moving out breakpoint details from the machine struct into a helper struct, and removing the limit on max nr of breakpoints. 20070610 Moving out tick functions into a helper struct as well (which also gets rid of the max limit). 20070612 FINALLY figured out why Debian/DECstation stopped working when translation read-ahead was enabled: in src/memory_rw.c, the call to invalidate_code_translation was made also if the memory access was an instruction load (if the page was mapped as writable); it shouldn't be called in that case. 20070613 Implementing some more MIPS32/64 revision 2 instructions: di, ei, ext, dext, dextm, dextu, and ins. 20070614 Implementing an instruction combination for the NetBSD/arm idle loop (making the host not use any cpu if NetBSD/arm inside the emulator is not using any cpu). Increasing the nr of ARM VPH entries from 128 to 384. 20070615 Removing the ENABLE_arch stuff from the configure script, so that all included architectures are included in both release and development builds. Moving memory related helper functions from misc.c to memory.c. Adding preliminary instructions for netbooting NetBSD/pmppc to guestoses.html; it doesn't work yet, there are weird timeouts. Beginning a total rewrite of the userland emulation modes (removing all emulation modes, beginning from scratch with NetBSD/MIPS and FreeBSD/Alpha only). 20070616 After fixing a bug in the DEC21143 NIC (the TDSTAT_OWN bit was only cleared for the last segment when transmitting, not all segments), NetBSD/pmppc boots with root-on-nfs without the timeouts. Updating guestoses.html. Removing the skeleton PSP (Playstation Portable) mode. Moving X11-related stuff in the machine struct into a helper struct. Cleanup of out-of-memory checks, to use a new CHECK_ALLOCATION macro (which prints a meaningful error message). Adding a COMMENT to each machine and device (for automagic .index comment generation). Doing regression testing for the next release. ============== RELEASE 0.4.6 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1480 2007/02/19 01:34:42 debug Exp $ 20061029 Changing usleep(1) calls in the debugger to usleep(10000) 20061107 Adding a new disk image option (-d o...) which sets the ISO9660 filesystem base offset; also making some other hacks to allow NetBSD/dreamcast and homebrew demos/games to boot directly from a filesystem image. Moving Dreamcast-specific stuff in the documentation to its own page (dreamcast.html). Adding a border to the Dreamcast PVR framebuffer. 20061108 Adding a -T command line option (again?), for halting the emulator on unimplemented memory accesses. 20061109 Continuing on various SH4 and Dreamcast related things. The emulator should now halt on more unimplemented device accesses, instead of just printing a warning, forcing me to actually implement missing stuff :) 20061111 Continuing on SH4 and Dreamcast stuff. Adding a bogus Landisk (SH4) machine mode. 20061112 Implementing some parts of the Dreamcast GDROM device. With some ugly hacks, NetBSD can (barely) mount an ISO image. 20061113 NetBSD/dreamcast now starts booting from the Live CD image, but crashes randomly quite early on in the boot process. 20061122 Beginning on a skeleton interrupt.h and interrupt.c for the new interrupt subsystem. 20061124 Continuing on the new interrupt system; taking the first steps to attempt to connect CPUs (SuperH and MIPS) and devices (dev_cons and SH4 timer interrupts) to it. Many things will probably break from now on. 20061125 Converting dev_ns16550, dev_8253 to the new interrupt system. Attempting to begin to convert the ISA bus. 20061130 Incorporating a patch from Brian Foley for the configure script, which checks for X11 libs in /usr/X11R6/lib64 (which is used on some Linux systems). 20061227 Adding a note in the man page about booting from Dreamcast CDROM images (i.e. that no external kernel is needed). 20061229 Continuing on the interrupt system rewrite: beginning to convert more devices, adding abort() calls for legacy interrupt system calls so that everything now _has_ to be rewritten! Almost all machine modes are now completely broken. 20061230 More progress on removing old interrupt code, mostly related to the ISA bus + devices, the LCA bus (on AlphaBook1), and the Footbridge bus (for CATS). And some minor PCI stuff. Connecting the ARM cpu to the new interrupt system. The CATS, NetWinder, and QEMU_MIPS machine modes now work with the new interrupt system :) 20061231 Connecting PowerPC CPUs to the new interrupt system. Making PReP machines (IBM 6050) work again. Beginning to convert the GT PCI controller (for e.g. Malta and Cobalt emulation). Some things work, but not everything. Updating Copyright notices for 2007. 20070101 Converting dev_kn02 from legacy style to devinit; the 3max machine mode now works with the new interrupt system :-] 20070105 Beginning to convert the SGI O2 machine to the new interrupt system; finally converting O2 (IP32) devices to devinit, etc. 20070106 Continuing on the interrupt system redesign/rewrite; KN01 (PMAX), KN230, and Dreamcast ASIC interrupts should work again, moving out stuff from machine.h and devices.h into the corresponding devices, beginning the rewrite of i80321 interrupts, etc. 20070107 Beginning on the rewrite of Eagle interrupt stuff (PReP, etc). 20070117 Beginning the rewrite of Algor (V3) interrupts (finally changing dev_v3 into devinit style). 20070118 Removing the "bus" registry concept from machine.h, because it was practically meaningless. Continuing on the rewrite of Algor V3 ISA interrupts. 20070121 More work on Algor interrupts; they are now working again, well enough to run NetBSD/algor. :-) 20070122 Converting VR41xx (HPCmips) interrupts. NetBSD/hpcmips can be installed using the new interrupt system :-) 20070123 Making the testmips mode work with the new interrupt system. 20070127 Beginning to convert DEC5800 devices to devinit, and to the new interrupt system. Converting Playstation 2 devices to devinit, and converting the interrupt system. Also fixing a severe bug: the interrupt mask register on Playstation 2 is bitwise _toggled_ on writes. 20070128 Removing the dummy NetGear machine mode and the 8250 device (which was only used by the NetGear machine). Beginning to convert the MacPPC GC (Grand Central) interrupt controller to the new interrupt system. Converting Jazz interrupts (PICA61 etc.) to the new interrupt system. NetBSD/arc can be installed again :-) Fixing the JAZZ timer (hardcoding it at 100 Hz, works with NetBSD and it is better than a completely dummy timer as it was before). Converting dev_mp to the new interrupt system, although I haven't had time to actually test it yet. Completely removing src/machines/interrupts.c, cpu_interrupt and cpu_interrupt_ack in src/cpu.c, and src/include/machine_interrupts.h! Adding fatal error messages + abort() in the few places that are left to fix. Converting dev_z8530 to the new interrupt system. FINALLY removing the md_int struct completely from the machine struct. SH4 fixes (adding a PADDR invalidation in the ITLB replacement code in memory_sh.c); the NetBSD/dreamcast LiveCD now runs all the way to the login prompt, and can be interacted with :-) Converting the CPC700 controller (PCI and interrupt controller for PM/PPC) to the new interrupt system. 20070129 Fixing MACE ISA interrupts (SGI IP32 emulation). Both NetBSD/ sgimips' and OpenBSD/sgi's ramdisk kernels can now be interacted with again. 20070130 Moving out the MIPS multi_lw and _sw instruction combinations so that they are auto-generated at compile time instead. 20070131 Adding detection of amd64/x86_64 hosts in the configure script, for doing initial experiments (again :-) with native code generation. Adding a -k command line option to set the size of the dyntrans cache, and a -B command line option to disable native code generation, even if GXemul was compiled with support for native code generation for the specific host CPU architecture. 20070201 Experimenting with a skeleton for native code generation. Changing the default behaviour, so that native code generation is now disabled by default, and has to be enabled by using -b on the command line. 20070202 Continuing the native code generation experiments. Making PCI interrupts work for Footbridge again. 20070203 More native code generation experiments. Removing most of the native code generation experimental code, it does not make sense to include any quick hacks like this. Minor cleanup/removal of some more legacy MIPS interrupt code. 20070204 Making i80321 interrupts work again (for NetBSD/evbarm etc.), and fixing the timer at 100 Hz. 20070206 Experimenting with removing the wdc interrupt slowness hack. 20070207 Lowering the number of dyntrans TLB entries for MIPS from 192 to 128, resulting in a minor speed improvement. Minor optimization to the code invalidation routine in cpu_dyntrans.c. 20070208 Increasing (experimentally) the nr of dyntrans instructions per loop from 60 to 120. 20070210 Commenting out (experimentally) the dyntrans_device_danger detection in memory_rw.c. Changing the testmips and baremips machines to use a revision 2 MIPS64 CPU by default, instead of revision 1. Removing the dummy i960, IA64, x86, AVR32, and HP PA-RISC files, the PC bios emulation, and the Olivetti M700 (ARC) and db64360 emulation modes. 20070211 Adding an "mp" demo to the demos directory, which tests the SMP functionality of the testmips machine. Fixing PReP interrupts some more. NetBSD/prep now boots again. 20070216 Adding a "nop workaround" for booting Mach/PMAX to the documentation; thanks to Artur Bujdoso for the values. Converting more of the MacPPC interrupt stuff to the new system. Beginning to convert BeBox interrupts to the new system. PPC603e should NOT have the PPC_NO_DEC flag! Removing it. Correcting BeBox clock speed (it was set to 100 in the NetBSD bootinfo block, but should be 33000000/4), allowing NetBSD to start without using the (incorrect) PPC_NO_DEC hack. 20070217 Implementing (slow) AltiVec vector loads and stores, allowing NetBSD/macppc to finally boot using the GENERIC kernel :-) Updating the documentation with install instructions for NetBSD/macppc. 20070218-19 Regression testing for the release. ============== RELEASE 0.4.4 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1256 2006/06/23 20:43:44 debug Exp $ 20060219 Various minor updates. Removing the old MIPS16 skeleton code, because it will need to be rewritten for dyntrans anyway. 20060220-22 Removing the non-working dyntrans backend support. Continuing on the 64-bit dyntrans virtual memory generalization. 20060223 More work on the 64-bit vm generalization. 20060225 Beginning on MIPS dyntrans load/store instructions. Minor PPC updates (64-bit load/store, etc). Fixes for the variable-instruction-length framework, some minor AVR updates (a simple Hello World program works!). Beginning on a skeleton for automatically generating documen- tation (for devices etc.). 20060226 PPC updates (adding some more 64-bit instructions, etc). AVR updates (more instructions). FINALLY found and fixed the zs bug, making NetBSD/macppc accept the serial console. 20060301 Adding more AVR instructions. 20060304 Continuing on AVR-related stuff. Beginning on a framework for cycle-accurate device emulation. Adding an experimental "PAL TV" device (just a dummy so far). 20060305 Adding more AVR instructions. Adding a dummy epcom serial controller (for TS7200 emulation). 20060310 Removing the emul() command from configuration files, so only net() and machine() are supported. Minor progress on the MIPS dyntrans rewrite. 20060311 Continuing on the MIPS dyntrans rewrite (adding more instructions, etc). 20060315 Adding more instructions (sllv, srav, srlv, bgtz[l], blez[l], beql, bnel, slti[u], various loads and stores). 20060316 Removing the ALWAYS_SIGNEXTEND_32 option, since it was rarely used. Adding more MIPS dyntrans instructions, and fixing bugs. 20060318 Implementing fast loads/stores for MIPS dyntrans (big/little endian, 32-bit and 64-bit modes). 20060320 Making MIPS dyntrans the default configure option; use "--enable-oldmips" to use the old bintrans system. Adding MIPS dyntrans dmult[u]; minor updates. 20060322 Continuing... adding some more instructions. Adding a simple skeleton for demangling C++ "_ZN" symbols. 20060323 Moving src/debugger.c into a new directory (src/debugger/). 20060324 Fixing the hack used to load PPC ELFs (useful for relocated Linux/ppc kernels), and adding a dummy G3 machine mode. 20060325-26 Beginning to experiment with GDB remote serial protocol connections; adding a -G command line option for selecting which TCP port to listen to. 20060330 Beginning a major cleanup to replace things like "0x%016llx" with more correct "0x%016"PRIx64, etc. Continuing on the GDB remote serial protocol support. 20060331 More cleanup, and some minor GDB remote progress. 20060402 Adding a hack to the configure script, to allow compilation on systems that lack PRIx64 etc. 20060406 Removing the temporary FreeBSD/arm hack in dev_ns16550.c and replacing it with a better fix from Olivier Houchard. 20060407 A remote debugger (gdb or ddd) can now start and stop the emulator using the GDB remote serial protocol, and registers and memory can be read. MIPS only for now. 20060408 More GDB progress: single-stepping also works, and also adding support for ARM, PowerPC, and Alpha targets. Continuing on the delay-slot-across-page-boundary issue. 20060412 Minor update: beginning to add support for the SPARC target to the remote GDB functionality. 20060414 Various MIPS updates: adding more instructions for dyntrans (eret, add), and making some exceptions work. Fixing a bug in dmult[u]. Implementing the first SPARC instructions (sethi, or). 20060415 Adding "magic trap" instructions so that PROM calls can be software emulated in MIPS dyntrans. Adding more MIPS dyntrans instructions (ddiv, dadd) and fixing another bug in dmult. 20060416 More MIPS dyntrans progress: adding [d]addi, movn, movz, dsllv, rfi, an ugly hack for supporting R2000/R3000 style faked caches, preliminary interrupt support, and various other updates and bugfixes. 20060417 Adding more SPARC instructions (add, sub, sll[x], sra[x], srl[x]), and useful SPARC header definitions. Adding the first (trivial) x86/AMD64 dyntrans instructions (nop, cli/sti, stc/clc, std/cld, simple mov, inc ax). Various other x86 updates related to variable instruction length stuff. Adding unaligned loads/stores to the MIPS dyntrans mode (but still using the pre-dyntrans (slow) imlementation). 20060419 Fixing a MIPS dyntrans exception-in-delay-slot bug. Removing the old "show opcode statistics" functionality, since it wasn't really useful and isn't implemented for dyntrans. Single-stepping (or running with instruction trace) now looks ok with dyntrans with delay-slot architectures. 20060420 Minor hacks (removing the -B command line option when compiled for non-bintrans, and some other very minor updates). Adding (slow) MIPS dyntrans load-linked/store-conditional. 20060422 Applying fixes for bugs discovered by Nils Weller's nwcc (static DEC memmap => now per machine, and adding an extern keyword in cpu_arm_instr.c). Finally found one of the MIPS dyntrans bugs that I've been looking for (copy/paste spelling error BIG vs LITTLE endian in cpu_mips_instr_loadstore.c for 16-bit fast stores). FINALLY found the major MIPS dyntrans bug: slti vs sltiu signed/unsigned code in cpu_mips_instr.c. :-) Adding more MIPS dyntrans instructions (lwc1, swc1, bgezal[l], ctc1, tlt[u], tge[u], tne, beginning on rdhwr). NetBSD/hpcmips can now reach userland when using dyntrans :-) Adding some more x86 dyntrans instructions. Finally removed the old Alpha-specific virtual memory code, and replaced it with the generic 64-bit version. Beginning to add disassembly support for SPECIAL3 MIPS opcodes. 20060423 Continuing on the delay-slot-across-page-boundary issue; adding an end_of_page2 ic slot (like I had planned before, but had removed for some reason). Adding a quick-and-dirty fallback to legacy coprocessor 1 code (i.e. skipping dyntrans implementation for now). NetBSD/hpcmips and NetBSD/pmax (when running on an emulated R4400) can now be installed and run. :-) (Many bugs left to fix, though.) Adding more MIPS dyntrans instructions: madd[u], msub[u]. Cleaning up the SPECIAL2 vs R5900/TX79/C790 "MMI" opcode maps somewhat (disassembly and dyntrans instruction decoding). 20060424 Adding an isa_revision field to mips_cpu_types.h, and making sure that SPECIAL3 opcodes cause Reserved Instruction exceptions on MIPS32/64 revisions lower than 2. Adding the SPARC 'ba', 'call', 'jmpl/retl', 'and', and 'xor' instructions. 20060425 Removing the -m command line option ("run at most x instructions") and -T ("single_step_on_bad_addr"), because they never worked correctly with dyntrans anyway. Freshening up the man page. 20060428 Adding more MIPS dyntrans instructions: bltzal[l], idle. Enabling MIPS dyntrans compare interrupts. 20060429 FINALLY found the weird dyntrans bug, causing NetBSD etc. to behave strangely: some floating point code (conditional coprocessor branches) could not be reused from the old non-dyntrans code. The "quick-and-dirty fallback" only appeared to work. Fixing by implementing bc1* for MIPS dyntrans. More MIPS instructions: [d]sub, sdc1, ldc1, dmtc1, dmfc1, cfc0. Freshening up MIPS floating point disassembly appearance. 20060430 Continuing on C790/R5900/TX79 disassembly; implementing 128-bit "por" and "pextlw". 20060504 Disabling -u (userland emulation) unless compiled as unstable development version. Beginning on freshening up the testmachine include files, to make it easier to reuse those files (placing them in src/include/testmachine/), and beginning on a set of "demos" or "tutorials" for the testmachine functionality. Minor updates to the MIPS GDB remote protocol stub. Refreshing doc/experiments.html and gdb_remote.html. Enabling Alpha emulation in the stable release configuration, even though no guest OSes for Alpha can run yet. 20060505 Adding a generic 'settings' object, which will contain references to settable variables (which will later be possible to access using the debugger). 20060506 Updating dev_disk and corresponding demo/documentation (and switching from SCSI to IDE disk types, so it actually works with current test machines :-). 20060510 Adding a -D_LARGEFILE_SOURCE hack for 64-bit Linux hosts, so that fseeko() doesn't give a warning. Updating the section about how dyntrans works (the "runnable IR") in doc/intro.html. Instruction updates (some x64=1 checks, some more R5900 dyntrans stuff: better mul/mult separation from MIPS32/64, adding ei and di). Updating MIPS cpuregs.h to a newer one (from NetBSD). Adding more MIPS dyntrans instructions: deret, ehb. 20060514 Adding disassembly and beginning implementation of SPARC wr and wrpr instructions. 20060515 Adding a SUN SPARC machine mode, with dummy SS20 and Ultra1 machines. Adding the 32-bit "rd psr" instruction. 20060517 Disassembly support for the general SPARC rd instruction. Partial implementation of the cmp (subcc) instruction. Some other minor updates (making sure that R5900 processors start up with the EIE bit enabled, otherwise Linux/playstation2 receives no interrupts). 20060519 Minor MIPS updates/cleanups. 20060521 Moving the MeshCube machine into evbmips; this seems to work reasonably well with a snapshot of a NetBSD MeshCube kernel. Cleanup/fix of MIPS config0 register initialization. 20060529 Minor MIPS fixes, including a sign-extension fix to the unaligned load/store code, which makes NetBSD/pmax on R3000 work better with dyntrans. (Ultrix and Linux/DECstation still don't work, though.) 20060530 Minor updates to the Alpha machine mode: adding an AlphaBook mode, an LCA bus (forwarding accesses to an ISA bus), etc. 20060531 Applying a bugfix for the MIPS dyntrans sc[d] instruction from Ondrej Palkovsky. (Many thanks.) 20060601 Minifix to allow ARM immediate msr instruction to not give an error for some valid values. More Alpha updates. 20060602 Some minor Alpha updates. 20060603 Adding the Alpha cmpbge instruction. NetBSD/alpha prints its first boot messages :-) on an emulated Alphabook 1. 20060612 Minor updates; adding a dev_ether.h include file for the testmachine ether device. Continuing the hunt for the dyntrans bug which makes Linux and Ultrix on DECstation behave strangely... FINALLY found it! It seems to be related to invalidation of the translation cache, on tlbw{r,i}. There also seems to be some remaining interrupt-related problems. 20060614 Correcting the implementation of ldc1/sdc1 for MIPS dyntrans (so that it uses 16 32-bit registers if the FR bit in the status register is not set). 20060616 REMOVING BINTRANS COMPLETELY! Removing the old MIPS interpretation mode. Removing the MFHILO_DELAY and instruction delay stuff, because they wouldn't work with dyntrans anyway. 20060617 Some documentation updates (adding "NetBSD-archive" to some URLs, and new Debian/DECstation installation screenshots). Removing the "tracenull" and "enable-caches" configure options. Improving MIPS dyntrans performance somewhat (only invalidate translations if necessary, on writes to the entryhi register, instead of doing it for all cop0 writes). 20060618 More cleanup after the removal of the old MIPS emulation. Trying to fix the MIPS dyntrans performance bugs/bottlenecks; only semi-successful so far (for R3000). 20060620 Minor update to allow clean compilation again on Tru64/Alpha. 20060622 MIPS cleanup and fixes (removing the pc_last stuff, which doesn't make sense with dyntrans anyway, and fixing a cross- page-delay-slot-with-exception case in end_of_page). Removing the old max_random_cycles_per_chunk stuff, and the concept of cycles vs instructions for MIPS emulation. FINALLY found and fixed the bug which caused NetBSD/pmax clocks to behave strangely (it was a load to the zero register, which was treated as a NOP; now it is treated as a load to a dummy scratch register). 20060623 Increasing the dyntrans chunk size back to N_SAFE_DYNTRANS_LIMIT, instead of N_SAFE_DYNTRANS_LIMIT/2. Preparing for a quick release, even though there are known bugs, and performance for non-R3000 MIPS emulation is very poor. :-/ Reverting to half the dyntrans chunk size again, because NetBSD/cats seemed less stable with full size chunks. :( NetBSD/sgimips 3.0 can now run :-) (With release 0.3.8, only NetBSD/sgimips 2.1 worked, not 3.0.) ============== RELEASE 0.4.0 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1121 2006/02/18 21:03:08 debug Exp $ 20051126 Cobalt and PReP now work with the 21143 NIC. Continuing on Alpha dyntrans things. Fixing some more left-shift-by-24 to unsigned. 20051127 Working on OpenFirmware emulation; major cleanup/redesign. Progress on MacPPC emulation: NetBSD detects two CPUs (when running with -n 2), framebuffer output (for text) works. Adding quick-hack Bandit PCI controller and "gc" interrupt controller for MacPPC. 20051128 Changing from a Bandit to a Uni-North controller for macppc. Continuing on OpenFirmware and MacPPC emulation in general (obio controller, and wdc attached to the obio seems to work). 20051129 More work on MacPPC emulation (adding a dummy ADB controller). Continuing the PCI bus cleanup (endianness and tag composition) and rewriting all PCI controllers' access functions. 20051130 Various minor PPC dyntrans optimizations. Manually inlining some parts of the framebuffer redraw routine. Slowly beginning the conversion of the old MIPS emulation into dyntrans (but this will take quite some time to get right). Generalizing quick_pc_to_pointers. 20051201 Documentation update (David Muse has made available a kernel which simplifies Debian/DECstation installation). Continuing on the ADB bus controller. 20051202 Beginning a rewrite of the Zilog serial controller (dev_zs). 20051203 Continuing on the zs rewrite (now called dev_z8530); conversion to devinit style. Reworking some of the input-only vs output-only vs input-output details of src/console.c, better warning messages, and adding a debug dump. Removing the concept of "device state"; it wasn't really used. Changing some debug output (-vv should now be used to show all details about devices and busses; not shown during normal startup anymore). Beginning on some SPARC instruction disassembly support. 20051204 Minor PPC updates (WALNUT skeleton stuff). Continuing on the MIPS dyntrans rewrite. More progress on the ADB controller (a keyboard is "detected" by NetBSD and OpenBSD). Downgrading OpenBSD/arc as a guest OS from "working" to "almost working" in the documentation. Progress on Algor emulation ("v3" PCI controller). 20051205 Minor updates. 20051207 Sorting devices according to address; this reduces complexity of device lookups from O(n) to O(log n) in memory_rw (but no real performance increase (yet) in experiments). 20051210 Beginning the work on native dyntrans backends (by making a simple skeleton; so far only for Alpha hosts). 20051211 Some very minor SPARC updates. 20051215 Fixing a bug in the MIPS mul (note: not mult) instruction, so it also works with non-64-bit emulation. (Thanks to Alec Voropay for noticing the problem.) 20051216 More work on the fake/empty/simple/skeleton/whatever backend; performance doesn't increase, so this isn't really worth it, but it was probably worth it to prepare for a real backend later. 20051219 More instr call statistics gathering and analysis stuff. 20051220 Another fix for MIPS 'mul'. Also converting mul and {d,}cl{o,z} to dyntrans. memory_ppc.c syntax error fix (noticed by Peter Valchev). Beginning to move out machines from src/machine.c into individual files in src/machines (in a way similar to the autodev system for devices). 20051222 Updating the documentation regarding NetBSD/pmax 3.0. 20051223 - " - NetBSD/cats 3.0. 20051225 - " - NetBSD/hpcmips 3.0. 20051226 Continuing on the machine registry redesign. Adding support for ARM rrx (33-bit rotate). Fixing some signed/unsigned issues (exposed by gcc -W). 20051227 Fixing the bug which prevented a NetBSD/prep 3.0 install kernel from starting (triggered when an mtmsr was the last instruction on a page). Unfortunately not enough to get the kernel to run as well as the 2.1 kernels did. 20051230 Some dyntrans refactoring. 20051231 Continuing on the machine registry redesign. 20060101-10 Continuing... moving more machines. Moving MD interrupt stuff from machine.c into a new src/machines/interrupts.c. 20060114 Adding various mvmeppc machine skeletons. 20060115 Continuing on mvme* stuff. NetBSD/mvmeppc prints boot messages (for MVME1600) and reaches the root device prompt, but no specific hardware devices are emulated yet. 20060116 Minor updates to the mvme1600 emulation mode; the Eagle PCI bus seems to work without much modification, and a 21143 can be detected, interrupts might work (but untested so far). Adding a fake MK48Txx (mkclock) device, for NetBSD/mvmeppc. 20060121 Adding an aux control register for ARM. (A BIG thank you to Olivier Houchard for tracking down this bug.) 20060122 Adding more ARM instructions (smulXY), and dev_iq80321_7seg. 20060124 Adding disassembly of more ARM instructions (mia*, mra/mar), and some semi-bogus XScale and i80321 registers. 20060201-02 Various minor updates. Moving the last machines out of machine.c. 20060204 Adding a -c command line option, for running debugger commands before the simulation starts, but after all files have been loaded. Minor iq80321-related updates. 20060209 Minor hacks (DEVINIT macro, etc). Preparing for the generalization of the 64-bit dyntrans address translation subsystem. 20060216 Adding ARM ldrd (double-register load). 20060217 Continuing on various ARM-related stuff. 20060218 More progress on the ATA/wdc emulation for NetBSD/iq80321. NetBSD/evbarm can now be installed :-) Updating the docs, etc. Continuing on Algor emulation. ============== RELEASE 0.3.8 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.815 2005/06/27 23:04:35 debug Exp $ 20050617 Experimenting some more with netbooting OpenBSD/sgi. Adding a hack which allows emulated ethernet networks to be distributed across multiple emulator processes. 20050618 Minor updates (documentation, dummy YAMON emulation, etc). 20050620 strcpy/strcat -> strlcpy/strlcat updates. Some more progress on evbmips (Malta). 20050621 Adding a section to doc/configfiles.html about ethernet emulation across multiple hosts. Beginning the work on the ARM translation engine (using the dynamic-but-not-binary translation method). Fixing a bintrans bug: 0x9fc00000 should always be treated as PROM area, just as 0xbfc00000 is. Minor progress on Malta emulation (the PCI-ISA bus). 20050622 NetBSD/evbmips can now be installed (using another emulated machine) and run (including userland and so on). :-) Spliting up the bintrans haddr_entry field into two (one for read, one for write). Probably not much of a speed increase, though. Updating some NetBSD 2.0 -> 2.0.2 in the documentation. 20050623 Minor updates (documentation, the TODO file, etc). gzipped kernels are now always automagically gunzipped when loaded. 20050624 Adding a dummy Playstation Portable (PSP) mode, just barely enough to run Hello World (in weird colors :-). Removing the -b command line option; old bintrans is enabled by default instead. It makes more sense. Trying to finally fix the non-working performance measurement thing (instr/second etc). 20050625 Continuing on the essential basics for ARM emulation. Two instructions seem to work, a branch and a simple "mov". (The mov arguments are not correct yet.) Performance is definitely reasonable. Various other minor updates. Adding the ARM "bl" instruction. Adding support for combining multiple ARM instructions into one function call. ("mov" + "mov" is the only one implemented so far, but it seems to work.) Cleaning up some IP32 interrupt things (crime/mace); disabling the PS/2 keyboard controller on IP32, so that NetBSD/sgimips boots into userland again. 20050626 Finally! NetBSD/sgimips netboots. Adding instructions to doc/guestoses.html on how to set up an nfs server etc. Various other minor fixes. Playstation Portable ".pbp" files can now be used directly. (The ELF part of the .pbp is extracted transparently.) Converting some sprintf -> snprintf. Adding some more instructions to the ARM disassembler. 20050627 More ARM updates. Adding some simple ldr(b), str(b), cmps, and conditional branch instructions, enough to run a simple Hello World program. All ARM instructions are now inlined/generated for all possible condition codes. Adding add and sub, and more load/store instructions. Removing dummy files: cpu_alpha.c, cpu_hppa.c, and cpu_sparc.c. Some minor documentation updates; preparing for a 0.3.4 release. Updating some URLs. ============== RELEASE 0.3.4 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.772 2005/06/04 12:02:16 debug Exp $ 20050428 Disabling the "-fmove-all-movables" option in the configure script, because it causes the compile to fail on OpenBSD/sgi. 20050502 Minor updates. 20050503 Removing the WRT54G mode (it was bogus anyway), and adding a comment about Windows NT for MIPS in doc/experiments.html. Minor updates to the x86 instruction decoding. 20050504 Adding some more x86 instructions. Adding support for reading files from ISO9660 CDROMs (including gzipped files). It's an ugly hack, but it seems to work. Various other minor updates (dev_vga.c, pc_bios.c etc). 20050505 Some more x86-related updates. Beginning (what I hope will be) a major code cleanup phase. "bootris" (an x86 bootsector) runs :-) 20050506 Adding some more x86 instructions. 20050507 tmpnam => mkstemp. Working on a hack to allow VGA charcells to be shown even when not running with X11. Adding more x86 instructions. 20050508 x86 32-bit SIB addressing fix, and more instructions. 20050509 Adding more x86 instructions. 20050510 Minor documentation updates, and other updates (x86 stuff etc.) 20050511 More x86-related updates. 20050513 Various updates, mostly x86-related. (Trying to fix flag calculation, factoring out the ugly shift/rotate code, and some other things.) 20050514 Adding support for loading some old i386 a.out executables. Finally beginning the cleanup of machine/PROM/bios dependant info. Some minor documentation updates. Trying to clean up ARCBIOS stuff a little. 20050515 Trying to make it possible to actually use more than one disk type per machine (floppy, ide, scsi). Trying to clean up the kbd vs PROM console stuff. (For PC and ARC emulation modes, mostly.) Beginning to add an 8259 interrupt controller, and connecting it to the x86 emulation. 20050516 The first x86 interrupts seem to work (keyboard stuff). Adding a 8253/8254 programmable interval timer skeleton. FreeDOS now reaches a command prompt and can be interacted with. 20050517 After some bugfixes, MS-DOS also (sometimes) reaches a command prompt now. Trying to fix the pckbc to work with MS-DOS' keyb.com, but no success yet. 20050518 Adding a simple 32-bit x86 MMU skeleton. 20050519 Some more work on the x86 stuff. (Beginning the work on paging, and various other fixes). 20050520 More updates. Working on dev_vga (4-bit graphics modes), adding 40 columns support to the PC bios emulation. Trying to add support for resizing windows when switching between graphics modes. 20050521 Many more x86-related updates. 20050522 Correcting the initial stack pointer's sign-extension for ARCBIOS emulation (thanks to Alec Voropay for noticing the error). Continuing on the cleanup (ARCBIOS etc). dev_vga updates. 20050523 More x86 updates: trying to add some support for protected mode interrupts (via gate descriptors) and many other fixes. More ARCBIOS cleanup. Adding a device flag which indicates that reads cause no side-effects. (Useful for the "dump" command in the debugger, and other things.) Adding support for directly starting up x86 ELFs, skipping the bootloader stage. (Most ELFs, however, are not suitable for this.) 20050524 Adding simple 32-bit x86 TSS task switching, but no privilege level support yet. More work on dev_vga. A small "Copper bars" demo works. :-) Adding support for Trap Flag (single-step exceptions), at least in real mode, and various other x86-related fixes. 20050525 Adding a new disk image prefix (gH;S;) which can be used to override the default nr of heads and sectors per track. 20050527 Various bug fixes, more work on the x86 mode (stack change on interrupts between different priv.levels), and some minor documentation updates. 20050528 Various fixes (x86 stuff). 20050529 More x86 fixes. An OpenBSD/i386 bootfloppy reaches userland and can be interacted with (although there are problems with key repetition). NetBSD/i386 triggers a serious CISC-related problem: instruction fetches across page boundaries, where the later part isn't actually part of the instruction. 20050530 Various minor updates. (Documentation updates, etc.) 20050531 Adding some experimental code (experiments/new_test_*) which could be useful for dynamic (but not binary) translation in the future. 20050602 Adding a dummy ARM skeleton. Fixing the pckbc key repetition problem (by adding release scancodes for all keypresses). 20050603 Minor updates for the next release. 20050604 Release testing. Minor updates. ============== RELEASE 0.3.3 ============== 20050604 There'll probably be a 0.3.3.1 release soon, with some very very tiny updates.
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.26 |