Parent Directory
| 
Revision Log
| Links to HEAD: | (view) (annotate) |
| Sticky Revision: |
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1325 2006/08/15 15:38:37 debug Exp $ 20060723 More Transputer instructions (pfix, nfix, opr, mint, ldl, ldlp, eqc, rev, ajw, stl, stlf, sthf, sub, ldnl, ldnlp, ldpi, move, wcnt, add, bcnt). Adding more SPARC instructions (andcc, addcc, bl, rdpr). Progress on the igsfb framebuffer used by NetBSD/netwinder. Enabling 8-bit fills in dev_fb. NetBSD/netwinder 3.0.1 can now run from a disk image :-) 20060724 Cleanup/performance fix for 64-bit virtual translation table updates (by removing the "timestamp" stuff). A full NetBSD/pmax 3.0.1 install for R4400 has dropped from 667 seconds to 584 :) Fixing the igsfb "almost vga" color (it is 24-bit, not 18-bit). Adding some MIPS instruction combinations (3*lw, and 3*addu). The 8048 keyboard now turns off interrupt enable between the KBR_ACK and the KBR_RSTDONE, to work better with Linux 2.6. Not causing PPC DEC interrupts if PPC_NO_DEC is set for a specific CPU; NetBSD/bebox gets slightly further than before. Adding some more SPARC instructions: branches, udiv. 20060725 Refreshing dev_pckbc.c a little. Cleanups for the SH emulation mode, and adding the first "compact" (16-bit) instructions: various simple movs, nop, shll, stc, or, ldc. 20060726 Adding dummy "pcn" (AMD PCnet NIC) PCI glue. 20060727 Various cleanups; removing stuff from cpu.h, such as running_translated (not really meaningful anymore), and page flags (breaking into the debugger clears all translations anyway). Minor MIPS instruction combination updates. 20060807 Expanding the 3*sw and 3*lw MIPS instruction combinations to work with 2* and 4* too, resulting in a minor performance gain. Implementing a usleep hack for the RM52xx/MIPS32/MIPS64 "wait" instruction (when emulating 1 cpu). 20060808 Experimenting with some more MIPS instruction combinations. Implementing support for showing a (hardcoded 12x22) text cursor in igsfb. 20060809 Simplifying the NetBSD/evbmips (Malta) install instructions somewhat (by using a NetBSD/pmax ramdisk install kernel). 20060812 Experimenting more with the MIPS 'wait' instruction. PCI configuration register writes can now be handled, which allow PCI IDE controllers to work with NetBSD/Malta 3.0.1 and NetBSD/cobalt 3.0.1. (Previously only NetBSD 2.1 worked.) 20060813 Updating dev_gt.c based on numbers from Alec Voropay, to enable Linux 2.6 to use PCI on Malta. Continuing on Algor interrupt stuff. 20060814 Adding support for routing ISA interrupts to two different interrupts, making it possible to run NetBSD/algor :-) 20060814-15 Testing for the release. ============== RELEASE 0.4.2 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1264 2006/06/25 11:08:04 debug Exp $ 20060624 Replacing the error-prone machine type initialization stuff with something more reasonable. Finally removing the old "cpu_run" kludge; moving around stuff in machine.c and emul.c to better suit the dyntrans system. Various minor dyntrans cleanups (renaming translate_address to translate_v2p, and experimenting with template physpages). 20060625 Removing the speed hack which separated the vph entries into two halves (code vs data); things seem a lot more stable now. Minor performance hack: R2000/R3000 cache isolation now only clears address translations when going into isolation, not when going out of it. Fixing the MIPS interrupt problems by letting mtc0 immediately cause interrupts. ============== RELEASE 0.4.0.1 ==============
++ trunk/HISTORY (local)
$Id: HISTORY,v 1.1121 2006/02/18 21:03:08 debug Exp $
20051126 Cobalt and PReP now work with the 21143 NIC.
Continuing on Alpha dyntrans things.
Fixing some more left-shift-by-24 to unsigned.
20051127 Working on OpenFirmware emulation; major cleanup/redesign.
Progress on MacPPC emulation: NetBSD detects two CPUs (when
running with -n 2), framebuffer output (for text) works.
Adding quick-hack Bandit PCI controller and "gc" interrupt
controller for MacPPC.
20051128 Changing from a Bandit to a Uni-North controller for macppc.
Continuing on OpenFirmware and MacPPC emulation in general
(obio controller, and wdc attached to the obio seems to work).
20051129 More work on MacPPC emulation (adding a dummy ADB controller).
Continuing the PCI bus cleanup (endianness and tag composition)
and rewriting all PCI controllers' access functions.
20051130 Various minor PPC dyntrans optimizations.
Manually inlining some parts of the framebuffer redraw routine.
Slowly beginning the conversion of the old MIPS emulation into
dyntrans (but this will take quite some time to get right).
Generalizing quick_pc_to_pointers.
20051201 Documentation update (David Muse has made available a kernel
which simplifies Debian/DECstation installation).
Continuing on the ADB bus controller.
20051202 Beginning a rewrite of the Zilog serial controller (dev_zs).
20051203 Continuing on the zs rewrite (now called dev_z8530); conversion
to devinit style.
Reworking some of the input-only vs output-only vs input-output
details of src/console.c, better warning messages, and adding
a debug dump.
Removing the concept of "device state"; it wasn't really used.
Changing some debug output (-vv should now be used to show all
details about devices and busses; not shown during normal
startup anymore).
Beginning on some SPARC instruction disassembly support.
20051204 Minor PPC updates (WALNUT skeleton stuff).
Continuing on the MIPS dyntrans rewrite.
More progress on the ADB controller (a keyboard is "detected"
by NetBSD and OpenBSD).
Downgrading OpenBSD/arc as a guest OS from "working" to
"almost working" in the documentation.
Progress on Algor emulation ("v3" PCI controller).
20051205 Minor updates.
20051207 Sorting devices according to address; this reduces complexity
of device lookups from O(n) to O(log n) in memory_rw (but no
real performance increase (yet) in experiments).
20051210 Beginning the work on native dyntrans backends (by making a
simple skeleton; so far only for Alpha hosts).
20051211 Some very minor SPARC updates.
20051215 Fixing a bug in the MIPS mul (note: not mult) instruction,
so it also works with non-64-bit emulation. (Thanks to Alec
Voropay for noticing the problem.)
20051216 More work on the fake/empty/simple/skeleton/whatever backend;
performance doesn't increase, so this isn't really worth it,
but it was probably worth it to prepare for a real backend
later.
20051219 More instr call statistics gathering and analysis stuff.
20051220 Another fix for MIPS 'mul'. Also converting mul and {d,}cl{o,z}
to dyntrans.
memory_ppc.c syntax error fix (noticed by Peter Valchev).
Beginning to move out machines from src/machine.c into
individual files in src/machines (in a way similar to the
autodev system for devices).
20051222 Updating the documentation regarding NetBSD/pmax 3.0.
20051223 - " - NetBSD/cats 3.0.
20051225 - " - NetBSD/hpcmips 3.0.
20051226 Continuing on the machine registry redesign.
Adding support for ARM rrx (33-bit rotate).
Fixing some signed/unsigned issues (exposed by gcc -W).
20051227 Fixing the bug which prevented a NetBSD/prep 3.0 install kernel
from starting (triggered when an mtmsr was the last instruction
on a page). Unfortunately not enough to get the kernel to run
as well as the 2.1 kernels did.
20051230 Some dyntrans refactoring.
20051231 Continuing on the machine registry redesign.
20060101-10 Continuing... moving more machines. Moving MD interrupt stuff
from machine.c into a new src/machines/interrupts.c.
20060114 Adding various mvmeppc machine skeletons.
20060115 Continuing on mvme* stuff. NetBSD/mvmeppc prints boot messages
(for MVME1600) and reaches the root device prompt, but no
specific hardware devices are emulated yet.
20060116 Minor updates to the mvme1600 emulation mode; the Eagle PCI bus
seems to work without much modification, and a 21143 can be
detected, interrupts might work (but untested so far).
Adding a fake MK48Txx (mkclock) device, for NetBSD/mvmeppc.
20060121 Adding an aux control register for ARM. (A BIG thank you to
Olivier Houchard for tracking down this bug.)
20060122 Adding more ARM instructions (smulXY), and dev_iq80321_7seg.
20060124 Adding disassembly of more ARM instructions (mia*, mra/mar),
and some semi-bogus XScale and i80321 registers.
20060201-02 Various minor updates. Moving the last machines out of
machine.c.
20060204 Adding a -c command line option, for running debugger commands
before the simulation starts, but after all files have been
loaded.
Minor iq80321-related updates.
20060209 Minor hacks (DEVINIT macro, etc).
Preparing for the generalization of the 64-bit dyntrans address
translation subsystem.
20060216 Adding ARM ldrd (double-register load).
20060217 Continuing on various ARM-related stuff.
20060218 More progress on the ATA/wdc emulation for NetBSD/iq80321.
NetBSD/evbarm can now be installed :-) Updating the docs, etc.
Continuing on Algor emulation.
============== RELEASE 0.3.8 ==============
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
| ViewVC Help | |
| Powered by ViewVC 1.1.26 |