src/machines/machine_landisk.c

/*
 *  Copyright (C) 2006-2007  Anders Gavare.  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions are met:
 *
 *  1. Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *  2. Redistributions in binary form must reproduce the above copyright  
 *     notice, this list of conditions and the following disclaimer in the 
 *     documentation and/or other materials provided with the distribution.
 *  3. The name of the author may not be used to endorse or promote products
 *     derived from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 *  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 *  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE   
 *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 *  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 *  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 *  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 *  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 *  SUCH DAMAGE.
 *   
 *
 *  $Id: machine_landisk.c,v 1.7 2007/03/08 10:01:50 debug Exp $
 *
 *  I-O DATA LANDISK USL-5P.
 *
 *  This machine consists of:
 *
 *      o)  An SH4 processor, which includes serial console etc,
 *      o)  an IDE controller at address 0x14000000,
 *      o)  and a minimal SH-IPL+G PROM emulation layer (required to make
 *          OpenBSD/landisk boot).
 */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "cpu.h"
#include "device.h"
#include "devices.h"
#include "machine.h"
#include "memory.h"
#include "misc.h"

#include "sh4_exception.h"


MACHINE_SETUP(landisk)
{
        char tmpstr[300];

        machine->machine_name = "Landisk USL-5P";

        /*  200 MHz SH4 CPU clock:  */
        if (machine->emulated_hz == 0)
                machine->emulated_hz = 200000000;

        /*  50 MHz SH4 PCLOCK:  */
        machine->cpus[machine->bootstrap_cpu]->cd.sh.pclock = 50000000;

        dev_ram_init(machine, 0x0c000000, 64 * 1048576, DEV_RAM_RAM, 0x0);

        /*  wdc0 at obio0 port 0x14000000-0x1400000f irq 10  */
        snprintf(tmpstr, sizeof(tmpstr), "wdc irq=%s.cpu[%i].irq[0x%x]"
            " addr_mult=2 addr=0x14000000",
            machine->path, machine->bootstrap_cpu, SH4_INTEVT_IRQ10);
        device_add(machine, tmpstr);

        if (!machine->prom_emulation)
                return;

        /*
         *  Ugly hardcoded register contents at bootup:
         *
         *  r4 (arg 0) = boot howto flags
         *  r5 (arg 1) = bootinfo pointer for NetBSD (?) and
         *               symbol end pointer for OpenBSD (?)
         *
         *  TODO: Make nicer.
         */
        cpu->cd.sh.r[4] = 0;
        cpu->cd.sh.r[5] = 0x8c000000 + 8 * 1048576;     /*  Note/TODO:
                                Assuming hardcoded 8 MB kernel size!  */

        sh_ipl_g_emul_init(machine);
}


MACHINE_DEFAULT_CPU(landisk)
{
        /*  Hitachi SH4 7751R, 200 MHz  */
        machine->cpu_name = strdup("SH7751R");
}


MACHINE_DEFAULT_RAM(landisk)
{
        /*  Note: This is the size of the boot ROM area, since the
            Landisk's RAM isn't located at physical address zero.  */
        machine->physical_ram_in_mb = 2;
}


MACHINE_REGISTER(landisk)
{
        MR_DEFAULT(landisk, "Landisk", ARCH_SH, MACHINE_LANDISK);
        me->set_default_ram = machine_default_ram_landisk;
        machine_entry_add_alias(me, "landisk");
}

1	/*
2	* Copyright (C) 2006-2007 Anders Gavare. All rights reserved.
3	*
4	* Redistribution and use in source and binary forms, with or without
5	* modification, are permitted provided that the following conditions are met:
6	*
7	* 1. Redistributions of source code must retain the above copyright
8	* notice, this list of conditions and the following disclaimer.
9	* 2. Redistributions in binary form must reproduce the above copyright
10	* notice, this list of conditions and the following disclaimer in the
11	* documentation and/or other materials provided with the distribution.
12	* 3. The name of the author may not be used to endorse or promote products
13	* derived from this software without specific prior written permission.
14	*
15	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16	* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18	* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23	* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24	* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25	* SUCH DAMAGE.
26	*
27	*
28	* $Id: machine_landisk.c,v 1.7 2007/03/08 10:01:50 debug Exp $
29	*
30	* I-O DATA LANDISK USL-5P.
31	*
32	* This machine consists of:
33	*
34	* o) An SH4 processor, which includes serial console etc,
35	* o) an IDE controller at address 0x14000000,
36	* o) and a minimal SH-IPL+G PROM emulation layer (required to make
37	* OpenBSD/landisk boot).
38	*/
39
40	#include <stdio.h>
41	#include <stdlib.h>
42	#include <string.h>
43
44	#include "cpu.h"
45	#include "device.h"
46	#include "devices.h"
47	#include "machine.h"
48	#include "memory.h"
49	#include "misc.h"
50
51	#include "sh4_exception.h"
52
53
54	MACHINE_SETUP(landisk)
55	{
56	char tmpstr[300];
57
58	machine->machine_name = "Landisk USL-5P";
59
60	/* 200 MHz SH4 CPU clock: */
61	if (machine->emulated_hz == 0)
62	machine->emulated_hz = 200000000;
63
64	/* 50 MHz SH4 PCLOCK: */
65	machine->cpus[machine->bootstrap_cpu]->cd.sh.pclock = 50000000;
66
67	dev_ram_init(machine, 0x0c000000, 64 * 1048576, DEV_RAM_RAM, 0x0);
68
69	/* wdc0 at obio0 port 0x14000000-0x1400000f irq 10 */
70	snprintf(tmpstr, sizeof(tmpstr), "wdc irq=%s.cpu[%i].irq[0x%x]"
71	" addr_mult=2 addr=0x14000000",
72	machine->path, machine->bootstrap_cpu, SH4_INTEVT_IRQ10);
73	device_add(machine, tmpstr);
74
75	if (!machine->prom_emulation)
76	return;
77
78	/*
79	* Ugly hardcoded register contents at bootup:
80	*
81	* r4 (arg 0) = boot howto flags
82	* r5 (arg 1) = bootinfo pointer for NetBSD (?) and
83	* symbol end pointer for OpenBSD (?)
84	*
85	* TODO: Make nicer.
86	*/
87	cpu->cd.sh.r[4] = 0;
88	cpu->cd.sh.r[5] = 0x8c000000 + 8 * 1048576; /* Note/TODO:
89	Assuming hardcoded 8 MB kernel size! */
90
91	sh_ipl_g_emul_init(machine);
92	}
93
94
95	MACHINE_DEFAULT_CPU(landisk)
96	{
97	/* Hitachi SH4 7751R, 200 MHz */
98	machine->cpu_name = strdup("SH7751R");
99	}
100
101
102	MACHINE_DEFAULT_RAM(landisk)
103	{
104	/* Note: This is the size of the boot ROM area, since the
105	Landisk's RAM isn't located at physical address zero. */
106	machine->physical_ram_in_mb = 2;
107	}
108
109
110	MACHINE_REGISTER(landisk)
111	{
112	MR_DEFAULT(landisk, "Landisk", ARCH_SH, MACHINE_LANDISK);
113	me->set_default_ram = machine_default_ram_landisk;
114	machine_entry_add_alias(me, "landisk");
115	}
116