src/machines/machine_landisk.c

/*
 *  Copyright (C) 2006-2007  Anders Gavare.  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions are met:
 *
 *  1. Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *  2. Redistributions in binary form must reproduce the above copyright  
 *     notice, this list of conditions and the following disclaimer in the 
 *     documentation and/or other materials provided with the distribution.
 *  3. The name of the author may not be used to endorse or promote products
 *     derived from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 *  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 *  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE   
 *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 *  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 *  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 *  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 *  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 *  SUCH DAMAGE.
 *   
 *
 *  $Id: machine_landisk.c,v 1.18 2007/06/15 18:08:10 debug Exp $
 *
 *  COMMENT: I-O DATA LanDisk USL-5P
 *
 *  This machine consists of:
 *
 *      o)  An SH4 processor, which includes serial console etc,
 *      o)  64 MB RAM (at 0x0c000000),
 *      o)  an IDE controller at address 0x14000000 (irq 10),
 *      o)  a RS5C313 real time clock, connected to the SH4 SCI port,
 *      o)  a PCI controller (PCIC),
 *      o)  and a minimal SH-IPL+G PROM emulation layer (required to make
 *          OpenBSD/landisk boot).
 *
 *  TODO:
 *      Realtek NIC (irq 5), PCIIDE (irq 6), USB controllers, etc.
 *
 *  TODO 2:
 *      Make it possible to select different landisk models.
 */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#include "cpu.h"
#include "device.h"
#include "devices.h"
#include "machine.h"
#include "memory.h"
#include "misc.h"

#include "sh4_exception.h"
#include "sh4_scireg.h"


/*  This is not really implemented yet: (experimental)  */
/*  #define INCLUDE_LANDISK_NIC  */


MACHINE_SETUP(landisk)
{
#ifdef INCLUDE_LANDISK_NIC
        struct pci_data *pcibus =
            machine->cpus[machine->bootstrap_cpu]->cd.sh.pcic_pcibus;
#endif
        char tmpstr[300];

        machine->machine_name = "Landisk USL-5P";

        /*  266.67 MHz SH4 CPU clock:  */
        if (machine->emulated_hz == 0)
                machine->emulated_hz = 266666666;

        /*  33.33 MHz SH4 PCLOCK:  */
        machine->cpus[machine->bootstrap_cpu]->cd.sh.pclock = 33333333;

        /*  Note: 64 MB RAM at 0x0c000000, not at 0x00000000.  */
        dev_ram_init(machine, 0x0c000000, 64 * 1048576, DEV_RAM_RAM, 0x0);

        /*  wdc0 at obio0 port 0x14000000-0x1400000f irq 10  */
        snprintf(tmpstr, sizeof(tmpstr), "wdc irq=%s.cpu[%i].irq[0x%x]"
            " addr_mult=2 addr=0x14000000",
            machine->path, machine->bootstrap_cpu, SH4_INTEVT_IRQ10);
        device_add(machine, tmpstr);

        /*  rsclock0 at shb0: RS5C313 real time clock  */
        snprintf(tmpstr, sizeof(tmpstr), "rs5c313 addr=0x%"PRIx64,
            (uint64_t) SCI_DEVICE_BASE);
        device_add(machine, tmpstr);

#ifdef INCLUDE_LANDISK_NIC
        /*  Realtek PCI NIC:  */
        bus_pci_add(machine, pcibus, machine->memory, 0, 0, 0, "rtl8139c");
#endif

        if (!machine->prom_emulation)
                return;

        /*
         *  Ugly hardcoded register contents at bootup:
         *
         *  r4 (arg 0) = boot howto flags
         *  r5 (arg 1) = bootinfo pointer for NetBSD (?) and
         *               symbol end pointer for OpenBSD (?)
         *
         *  TODO: Make nicer.
         */
        cpu->cd.sh.r[4] = 0;
        cpu->cd.sh.r[5] = 0x8c000000 + 10 * 1048576;    /*  Note/TODO:
                                Assuming hardcoded 10 MB kernel size!  */

        sh_ipl_g_emul_init(machine);
}


MACHINE_DEFAULT_CPU(landisk)
{
        /*  Hitachi SH4 7751R, 266.67 MHz  */
        machine->cpu_name = strdup("SH7751R");
}


MACHINE_DEFAULT_RAM(landisk)
{
        /*  Note: This is the size of the boot ROM area, since the
            Landisk's RAM isn't located at physical address zero.  */
        machine->physical_ram_in_mb = 2;
}


MACHINE_REGISTER(landisk)
{
        MR_DEFAULT(landisk, "Landisk", ARCH_SH, MACHINE_LANDISK);
        me->set_default_ram = machine_default_ram_landisk;

        machine_entry_add_alias(me, "landisk");
        machine_entry_add_alias(me, "usl-5p");
}

1	dpavlin	34	/*
2			* Copyright (C) 2006-2007 Anders Gavare. All rights reserved.
3			*
4			* Redistribution and use in source and binary forms, with or without
5			* modification, are permitted provided that the following conditions are met:
6			*
7			* 1. Redistributions of source code must retain the above copyright
8			* notice, this list of conditions and the following disclaimer.
9			* 2. Redistributions in binary form must reproduce the above copyright
10			* notice, this list of conditions and the following disclaimer in the
11			* documentation and/or other materials provided with the distribution.
12			* 3. The name of the author may not be used to endorse or promote products
13			* derived from this software without specific prior written permission.
14			*
15			* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16			* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17			* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18			* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19			* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20			* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21			* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22			* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23			* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24			* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25			* SUCH DAMAGE.
26			*
27			*
28	dpavlin	42	* $Id: machine_landisk.c,v 1.18 2007/06/15 18:08:10 debug Exp $
29	dpavlin	34	*
30	dpavlin	42	* COMMENT: I-O DATA LanDisk USL-5P
31	dpavlin	36	*
32			* This machine consists of:
33			*
34			* o) An SH4 processor, which includes serial console etc,
35	dpavlin	40	* o) 64 MB RAM (at 0x0c000000),
36			* o) an IDE controller at address 0x14000000 (irq 10),
37			* o) a RS5C313 real time clock, connected to the SH4 SCI port,
38			* o) a PCI controller (PCIC),
39	dpavlin	36	* o) and a minimal SH-IPL+G PROM emulation layer (required to make
40			* OpenBSD/landisk boot).
41	dpavlin	40	*
42			* TODO:
43			* Realtek NIC (irq 5), PCIIDE (irq 6), USB controllers, etc.
44	dpavlin	42	*
45			* TODO 2:
46			* Make it possible to select different landisk models.
47	dpavlin	34	*/
48
49			#include <stdio.h>
50			#include <stdlib.h>
51			#include <string.h>
52
53			#include "cpu.h"
54			#include "device.h"
55			#include "devices.h"
56			#include "machine.h"
57			#include "memory.h"
58			#include "misc.h"
59
60	dpavlin	36	#include "sh4_exception.h"
61	dpavlin	38	#include "sh4_scireg.h"
62	dpavlin	34
63	dpavlin	36
64	dpavlin	40	/* This is not really implemented yet: (experimental) */
65			/* #define INCLUDE_LANDISK_NIC */
66
67
68	dpavlin	34	MACHINE_SETUP(landisk)
69			{
70	dpavlin	40	#ifdef INCLUDE_LANDISK_NIC
71			struct pci_data *pcibus =
72			machine->cpus[machine->bootstrap_cpu]->cd.sh.pcic_pcibus;
73			#endif
74	dpavlin	36	char tmpstr[300];
75	dpavlin	34
76	dpavlin	36	machine->machine_name = "Landisk USL-5P";
77
78	dpavlin	40	/* 266.67 MHz SH4 CPU clock: */
79	dpavlin	34	if (machine->emulated_hz == 0)
80	dpavlin	40	machine->emulated_hz = 266666666;
81	dpavlin	34
82	dpavlin	40	/* 33.33 MHz SH4 PCLOCK: */
83			machine->cpus[machine->bootstrap_cpu]->cd.sh.pclock = 33333333;
84	dpavlin	34
85	dpavlin	40	/* Note: 64 MB RAM at 0x0c000000, not at 0x00000000. */
86	dpavlin	34	dev_ram_init(machine, 0x0c000000, 64 * 1048576, DEV_RAM_RAM, 0x0);
87
88	dpavlin	36	/* wdc0 at obio0 port 0x14000000-0x1400000f irq 10 */
89			snprintf(tmpstr, sizeof(tmpstr), "wdc irq=%s.cpu[%i].irq[0x%x]"
90			" addr_mult=2 addr=0x14000000",
91			machine->path, machine->bootstrap_cpu, SH4_INTEVT_IRQ10);
92			device_add(machine, tmpstr);
93	dpavlin	34
94	dpavlin	38	/* rsclock0 at shb0: RS5C313 real time clock */
95			snprintf(tmpstr, sizeof(tmpstr), "rs5c313 addr=0x%"PRIx64,
96			(uint64_t) SCI_DEVICE_BASE);
97			device_add(machine, tmpstr);
98
99	dpavlin	40	#ifdef INCLUDE_LANDISK_NIC
100			/* Realtek PCI NIC: */
101			bus_pci_add(machine, pcibus, machine->memory, 0, 0, 0, "rtl8139c");
102			#endif
103
104	dpavlin	34	if (!machine->prom_emulation)
105			return;
106
107	dpavlin	36	/*
108			* Ugly hardcoded register contents at bootup:
109			*
110			* r4 (arg 0) = boot howto flags
111			* r5 (arg 1) = bootinfo pointer for NetBSD (?) and
112			* symbol end pointer for OpenBSD (?)
113			*
114			* TODO: Make nicer.
115			*/
116			cpu->cd.sh.r[4] = 0;
117	dpavlin	40	cpu->cd.sh.r[5] = 0x8c000000 + 10 * 1048576; /* Note/TODO:
118			Assuming hardcoded 10 MB kernel size! */
119	dpavlin	36
120			sh_ipl_g_emul_init(machine);
121	dpavlin	34	}
122
123
124			MACHINE_DEFAULT_CPU(landisk)
125			{
126	dpavlin	40	/* Hitachi SH4 7751R, 266.67 MHz */
127	dpavlin	36	machine->cpu_name = strdup("SH7751R");
128	dpavlin	34	}
129
130
131			MACHINE_DEFAULT_RAM(landisk)
132			{
133			/* Note: This is the size of the boot ROM area, since the
134			Landisk's RAM isn't located at physical address zero. */
135			machine->physical_ram_in_mb = 2;
136			}
137
138
139			MACHINE_REGISTER(landisk)
140			{
141			MR_DEFAULT(landisk, "Landisk", ARCH_SH, MACHINE_LANDISK);
142			me->set_default_ram = machine_default_ram_landisk;
143	dpavlin	40
144	dpavlin	34	machine_entry_add_alias(me, "landisk");
145	dpavlin	40	machine_entry_add_alias(me, "usl-5p");
146	dpavlin	34	}
147