1 |
/* |
2 |
* Copyright (C) 2003-2006 Anders Gavare. All rights reserved. |
3 |
* |
4 |
* Redistribution and use in source and binary forms, with or without |
5 |
* modification, are permitted provided that the following conditions are met: |
6 |
* |
7 |
* 1. Redistributions of source code must retain the above copyright |
8 |
* notice, this list of conditions and the following disclaimer. |
9 |
* 2. Redistributions in binary form must reproduce the above copyright |
10 |
* notice, this list of conditions and the following disclaimer in the |
11 |
* documentation and/or other materials provided with the distribution. |
12 |
* 3. The name of the author may not be used to endorse or promote products |
13 |
* derived from this software without specific prior written permission. |
14 |
* |
15 |
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
16 |
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
17 |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
18 |
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
19 |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
20 |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
21 |
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
22 |
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
23 |
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
24 |
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
25 |
* SUCH DAMAGE. |
26 |
* |
27 |
* |
28 |
* $Id: machine_hpcmips.c,v 1.3 2006/06/24 10:19:19 debug Exp $ |
29 |
*/ |
30 |
|
31 |
#include <stdio.h> |
32 |
#include <stdlib.h> |
33 |
#include <string.h> |
34 |
|
35 |
#include "cpu.h" |
36 |
#include "device.h" |
37 |
#include "devices.h" |
38 |
#include "machine.h" |
39 |
#include "machine_interrupts.h" |
40 |
#include "memory.h" |
41 |
#include "misc.h" |
42 |
|
43 |
#include "hpc_bootinfo.h" |
44 |
#include "vripreg.h" |
45 |
|
46 |
|
47 |
MACHINE_SETUP(hpcmips) |
48 |
{ |
49 |
char tmpstr[1000]; |
50 |
struct hpc_bootinfo hpc_bootinfo; |
51 |
int hpc_platid_flags = 0, hpc_platid_cpu_submodel = 0, |
52 |
hpc_platid_cpu_model = 0, hpc_platid_cpu_series = 0, |
53 |
hpc_platid_cpu_arch = 0, |
54 |
hpc_platid_submodel = 0, hpc_platid_model = 0, |
55 |
hpc_platid_series = 0, hpc_platid_vendor = 0; |
56 |
uint64_t hpc_fb_addr = 0; |
57 |
int hpc_fb_bits = 0, hpc_fb_encoding = 0; |
58 |
int hpc_fb_xsize = 0; |
59 |
int hpc_fb_ysize = 0; |
60 |
int hpc_fb_xsize_mem = 0; |
61 |
int hpc_fb_ysize_mem = 0; |
62 |
|
63 |
cpu->byte_order = EMUL_LITTLE_ENDIAN; |
64 |
memset(&hpc_bootinfo, 0, sizeof(hpc_bootinfo)); |
65 |
|
66 |
/* |
67 |
* NOTE: See http://forums.projectmayo.com/viewtopic.php?topic=2743& |
68 |
* forum=23 for info on framebuffer addresses. |
69 |
*/ |
70 |
|
71 |
switch (machine->machine_subtype) { |
72 |
|
73 |
case MACHINE_HPCMIPS_CASIO_BE300: |
74 |
/* 166MHz VR4131 */ |
75 |
machine->machine_name = "Casio Cassiopeia BE-300"; |
76 |
hpc_fb_addr = 0x0a200000; |
77 |
hpc_fb_xsize = 240; |
78 |
hpc_fb_ysize = 320; |
79 |
hpc_fb_xsize_mem = 256; |
80 |
hpc_fb_ysize_mem = 320; |
81 |
hpc_fb_bits = 15; |
82 |
hpc_fb_encoding = BIFB_D16_0000; |
83 |
|
84 |
/* TODO: irq? */ |
85 |
snprintf(tmpstr, sizeof(tmpstr), "ns16550 irq=0 addr=0x" |
86 |
"0a008680 addr_mult=4 in_use=%i", machine->use_x11? 0 : 1); |
87 |
machine->main_console_handle = (size_t) |
88 |
device_add(machine, tmpstr); |
89 |
|
90 |
machine->md_int.vr41xx_data = dev_vr41xx_init(machine, |
91 |
machine->memory, 4131); |
92 |
machine->md_interrupt = vr41xx_interrupt; |
93 |
|
94 |
hpc_platid_cpu_arch = 1; /* MIPS */ |
95 |
hpc_platid_cpu_series = 1; /* VR */ |
96 |
hpc_platid_cpu_model = 1; /* VR41XX */ |
97 |
hpc_platid_cpu_submodel = 6; /* VR4131 */ |
98 |
hpc_platid_vendor = 3; /* Casio */ |
99 |
hpc_platid_series = 1; /* CASSIOPEIAE */ |
100 |
hpc_platid_model = 2; /* EXXX */ |
101 |
hpc_platid_submodel = 3; /* E500 */ |
102 |
/* TODO: Don't use model number for E500, it's a BE300! */ |
103 |
break; |
104 |
|
105 |
case MACHINE_HPCMIPS_CASIO_E105: |
106 |
/* 131MHz VR4121 */ |
107 |
machine->machine_name = "Casio Cassiopeia E-105"; |
108 |
hpc_fb_addr = 0x0a200000; /* TODO? */ |
109 |
hpc_fb_xsize = 240; |
110 |
hpc_fb_ysize = 320; |
111 |
hpc_fb_xsize_mem = 256; |
112 |
hpc_fb_ysize_mem = 320; |
113 |
hpc_fb_bits = 16; |
114 |
hpc_fb_encoding = BIFB_D16_0000; |
115 |
|
116 |
/* TODO: irq? */ |
117 |
snprintf(tmpstr, sizeof(tmpstr), "ns16550 irq=0 addr=0x" |
118 |
"0a008680 addr_mult=4 in_use=%i", machine->use_x11? 0 : 1); |
119 |
machine->main_console_handle = (size_t) |
120 |
device_add(machine, tmpstr); |
121 |
|
122 |
machine->md_int.vr41xx_data = dev_vr41xx_init(machine, |
123 |
machine->memory, 4121); |
124 |
machine->md_interrupt = vr41xx_interrupt; |
125 |
|
126 |
hpc_platid_cpu_arch = 1; /* MIPS */ |
127 |
hpc_platid_cpu_series = 1; /* VR */ |
128 |
hpc_platid_cpu_model = 1; /* VR41XX */ |
129 |
hpc_platid_cpu_submodel = 3; /* VR4121 */ |
130 |
hpc_platid_vendor = 3; /* Casio */ |
131 |
hpc_platid_series = 1; /* CASSIOPEIAE */ |
132 |
hpc_platid_model = 2; /* EXXX */ |
133 |
hpc_platid_submodel = 2; /* E105 */ |
134 |
break; |
135 |
|
136 |
case MACHINE_HPCMIPS_NEC_MOBILEPRO_770: |
137 |
/* 131 MHz VR4121 */ |
138 |
machine->machine_name = "NEC MobilePro 770"; |
139 |
machine->stable = 1; |
140 |
hpc_fb_addr = 0xa000000; |
141 |
hpc_fb_xsize = 640; |
142 |
hpc_fb_ysize = 240; |
143 |
hpc_fb_xsize_mem = 800; |
144 |
hpc_fb_ysize_mem = 240; |
145 |
hpc_fb_bits = 16; |
146 |
hpc_fb_encoding = BIFB_D16_0000; |
147 |
|
148 |
machine->md_int.vr41xx_data = dev_vr41xx_init(machine, |
149 |
machine->memory, 4121); |
150 |
machine->md_interrupt = vr41xx_interrupt; |
151 |
|
152 |
hpc_platid_cpu_arch = 1; /* MIPS */ |
153 |
hpc_platid_cpu_series = 1; /* VR */ |
154 |
hpc_platid_cpu_model = 1; /* VR41XX */ |
155 |
hpc_platid_cpu_submodel = 3; /* VR4121 */ |
156 |
hpc_platid_vendor = 1; /* NEC */ |
157 |
hpc_platid_series = 2; /* NEC MCR */ |
158 |
hpc_platid_model = 2; /* MCR 5XX */ |
159 |
hpc_platid_submodel = 4; /* MCR 520A */ |
160 |
break; |
161 |
|
162 |
case MACHINE_HPCMIPS_NEC_MOBILEPRO_780: |
163 |
/* 166 (or 168) MHz VR4121 */ |
164 |
machine->machine_name = "NEC MobilePro 780"; |
165 |
machine->stable = 1; |
166 |
hpc_fb_addr = 0xa180100; |
167 |
hpc_fb_xsize = 640; |
168 |
hpc_fb_ysize = 240; |
169 |
hpc_fb_xsize_mem = 640; |
170 |
hpc_fb_ysize_mem = 240; |
171 |
hpc_fb_bits = 16; |
172 |
hpc_fb_encoding = BIFB_D16_0000; |
173 |
|
174 |
machine->md_int.vr41xx_data = dev_vr41xx_init(machine, |
175 |
machine->memory, 4121); |
176 |
machine->md_interrupt = vr41xx_interrupt; |
177 |
|
178 |
hpc_platid_cpu_arch = 1; /* MIPS */ |
179 |
hpc_platid_cpu_series = 1; /* VR */ |
180 |
hpc_platid_cpu_model = 1; /* VR41XX */ |
181 |
hpc_platid_cpu_submodel = 3; /* VR4121 */ |
182 |
hpc_platid_vendor = 1; /* NEC */ |
183 |
hpc_platid_series = 2; /* NEC MCR */ |
184 |
hpc_platid_model = 2; /* MCR 5XX */ |
185 |
hpc_platid_submodel = 8; /* MCR 530A */ |
186 |
break; |
187 |
|
188 |
case MACHINE_HPCMIPS_NEC_MOBILEPRO_800: |
189 |
/* 131 MHz VR4121 */ |
190 |
machine->machine_name = "NEC MobilePro 800"; |
191 |
machine->stable = 1; |
192 |
hpc_fb_addr = 0xa000000; |
193 |
hpc_fb_xsize = 800; |
194 |
hpc_fb_ysize = 600; |
195 |
hpc_fb_xsize_mem = 800; |
196 |
hpc_fb_ysize_mem = 600; |
197 |
hpc_fb_bits = 16; |
198 |
hpc_fb_encoding = BIFB_D16_0000; |
199 |
|
200 |
machine->md_int.vr41xx_data = dev_vr41xx_init(machine, |
201 |
machine->memory, 4121); |
202 |
machine->md_interrupt = vr41xx_interrupt; |
203 |
|
204 |
hpc_platid_cpu_arch = 1; /* MIPS */ |
205 |
hpc_platid_cpu_series = 1; /* VR */ |
206 |
hpc_platid_cpu_model = 1; /* VR41XX */ |
207 |
hpc_platid_cpu_submodel = 3; /* VR4121 */ |
208 |
hpc_platid_vendor = 1; /* NEC */ |
209 |
hpc_platid_series = 2; /* NEC MCR */ |
210 |
hpc_platid_model = 3; /* MCR 7XX */ |
211 |
hpc_platid_submodel = 2; /* MCR 700A */ |
212 |
break; |
213 |
|
214 |
case MACHINE_HPCMIPS_NEC_MOBILEPRO_880: |
215 |
/* 168 MHz VR4121 */ |
216 |
machine->machine_name = "NEC MobilePro 880"; |
217 |
machine->stable = 1; |
218 |
hpc_fb_addr = 0xa0ea600; |
219 |
hpc_fb_xsize = 800; |
220 |
hpc_fb_ysize = 600; |
221 |
hpc_fb_xsize_mem = 800; |
222 |
hpc_fb_ysize_mem = 600; |
223 |
hpc_fb_bits = 16; |
224 |
hpc_fb_encoding = BIFB_D16_0000; |
225 |
|
226 |
machine->md_int.vr41xx_data = dev_vr41xx_init(machine, |
227 |
machine->memory, 4121); |
228 |
machine->md_interrupt = vr41xx_interrupt; |
229 |
|
230 |
hpc_platid_cpu_arch = 1; /* MIPS */ |
231 |
hpc_platid_cpu_series = 1; /* VR */ |
232 |
hpc_platid_cpu_model = 1; /* VR41XX */ |
233 |
hpc_platid_cpu_submodel = 3; /* VR4121 */ |
234 |
hpc_platid_vendor = 1; /* NEC */ |
235 |
hpc_platid_series = 2; /* NEC MCR */ |
236 |
hpc_platid_model = 3; /* MCR 7XX */ |
237 |
hpc_platid_submodel = 4; /* MCR 730A */ |
238 |
break; |
239 |
|
240 |
case MACHINE_HPCMIPS_AGENDA_VR3: |
241 |
/* 66 MHz VR4181 */ |
242 |
machine->machine_name = "Agenda VR3"; |
243 |
/* TODO: */ |
244 |
hpc_fb_addr = 0x1000; |
245 |
hpc_fb_xsize = 160; |
246 |
hpc_fb_ysize = 240; |
247 |
hpc_fb_xsize_mem = 160; |
248 |
hpc_fb_ysize_mem = 240; |
249 |
hpc_fb_bits = 4; |
250 |
hpc_fb_encoding = BIFB_D4_M2L_F; |
251 |
|
252 |
machine->md_int.vr41xx_data = dev_vr41xx_init(machine, |
253 |
machine->memory, 4181); |
254 |
machine->md_interrupt = vr41xx_interrupt; |
255 |
|
256 |
/* TODO: Hm... irq 17 according to linux, but |
257 |
VRIP_INTR_SIU (=9) here? */ |
258 |
{ |
259 |
int x; |
260 |
snprintf(tmpstr, sizeof(tmpstr), |
261 |
"ns16550 irq=%i addr=0x0c000010", 8+VRIP_INTR_SIU); |
262 |
x = (size_t)device_add(machine, tmpstr); |
263 |
|
264 |
if (!machine->use_x11) |
265 |
machine->main_console_handle = x; |
266 |
} |
267 |
|
268 |
hpc_platid_cpu_arch = 1; /* MIPS */ |
269 |
hpc_platid_cpu_series = 1; /* VR */ |
270 |
hpc_platid_cpu_model = 1; /* VR41XX */ |
271 |
hpc_platid_cpu_submodel = 4; /* VR4181 */ |
272 |
hpc_platid_vendor = 15; /* Agenda */ |
273 |
hpc_platid_series = 1; /* VR */ |
274 |
hpc_platid_model = 1; /* VR3 */ |
275 |
hpc_platid_submodel = 0; /* - */ |
276 |
|
277 |
dev_ram_init(machine, 0x0f000000, 0x01000000, |
278 |
DEV_RAM_MIRROR | DEV_RAM_MIGHT_POINT_TO_DEVICES, 0x0); |
279 |
break; |
280 |
|
281 |
case MACHINE_HPCMIPS_IBM_WORKPAD_Z50: |
282 |
/* 131 MHz VR4121 */ |
283 |
machine->machine_name = "IBM Workpad Z50"; |
284 |
/* TODO: */ |
285 |
hpc_fb_addr = 0xa000000; |
286 |
hpc_fb_xsize = 640; |
287 |
hpc_fb_ysize = 480; |
288 |
hpc_fb_xsize_mem = 640; |
289 |
hpc_fb_ysize_mem = 480; |
290 |
hpc_fb_bits = 16; |
291 |
hpc_fb_encoding = BIFB_D16_0000; |
292 |
|
293 |
machine->md_int.vr41xx_data = dev_vr41xx_init(machine, |
294 |
machine->memory, 4121); |
295 |
machine->md_interrupt = vr41xx_interrupt; |
296 |
|
297 |
hpc_platid_cpu_arch = 1; /* MIPS */ |
298 |
hpc_platid_cpu_series = 1; /* VR */ |
299 |
hpc_platid_cpu_model = 1; /* VR41XX */ |
300 |
hpc_platid_cpu_submodel = 3; /* VR4121 */ |
301 |
hpc_platid_vendor = 9; /* IBM */ |
302 |
hpc_platid_series = 1; /* WorkPad */ |
303 |
hpc_platid_model = 1; /* Z50 */ |
304 |
hpc_platid_submodel = 0; /* 0 */ |
305 |
break; |
306 |
|
307 |
default:printf("Unimplemented hpcmips machine number.\n"); |
308 |
exit(1); |
309 |
} |
310 |
|
311 |
store_32bit_word_in_host(cpu, (unsigned char *)&hpc_bootinfo.platid_cpu, |
312 |
(hpc_platid_cpu_arch << 26) + (hpc_platid_cpu_series << 20) |
313 |
+ (hpc_platid_cpu_model << 14) + (hpc_platid_cpu_submodel << 8) |
314 |
+ hpc_platid_flags); |
315 |
store_32bit_word_in_host(cpu, (unsigned char *)&hpc_bootinfo. |
316 |
platid_machine, (hpc_platid_vendor << 22) + (hpc_platid_series<<16) |
317 |
+ (hpc_platid_model << 8) + hpc_platid_submodel); |
318 |
|
319 |
if (machine->use_x11) { |
320 |
machine->main_console_handle = |
321 |
machine->md_int.vr41xx_data->kiu_console_handle; |
322 |
} |
323 |
|
324 |
if (hpc_fb_addr != 0) { |
325 |
dev_fb_init(machine, machine->memory, hpc_fb_addr, VFB_HPC, |
326 |
hpc_fb_xsize, hpc_fb_ysize, |
327 |
hpc_fb_xsize_mem, hpc_fb_ysize_mem, |
328 |
hpc_fb_bits, machine->machine_name); |
329 |
|
330 |
/* NetBSD/hpcmips uses framebuffer at physical |
331 |
address 0x8.......: */ |
332 |
dev_ram_init(machine, 0x80000000, 0x20000000, |
333 |
DEV_RAM_MIRROR | DEV_RAM_MIGHT_POINT_TO_DEVICES, 0x0); |
334 |
} |
335 |
|
336 |
if (!machine->prom_emulation) |
337 |
return; |
338 |
|
339 |
|
340 |
/* NetBSD/hpcmips and possibly others expects the following: */ |
341 |
|
342 |
cpu->cd.mips.gpr[MIPS_GPR_A0] = 1; /* argc */ |
343 |
cpu->cd.mips.gpr[MIPS_GPR_A1] = machine->physical_ram_in_mb * 1048576 |
344 |
+ 0xffffffff80000000ULL - 512; /* argv */ |
345 |
cpu->cd.mips.gpr[MIPS_GPR_A2] = machine->physical_ram_in_mb * 1048576 |
346 |
+ 0xffffffff80000000ULL - 256; /* ptr to hpc_bootinfo */ |
347 |
|
348 |
machine->bootstr = machine->boot_kernel_filename; |
349 |
store_32bit_word(cpu, 0x80000000ULL + (machine->physical_ram_in_mb << |
350 |
20) - 512, 0x80000000ULL + (machine->physical_ram_in_mb << 20) |
351 |
- 512 + 16); |
352 |
store_32bit_word(cpu, 0x80000000ULL + (machine->physical_ram_in_mb << |
353 |
20) - 512 + 4, 0); |
354 |
store_string(cpu, 0x80000000ULL + (machine->physical_ram_in_mb << |
355 |
20) - 512 + 16, machine->bootstr); |
356 |
|
357 |
/* Special case for the Agenda VR3: */ |
358 |
if (machine->machine_subtype == MACHINE_HPCMIPS_AGENDA_VR3) { |
359 |
const int tmplen = 1000; |
360 |
char *tmp = malloc(tmplen); |
361 |
|
362 |
cpu->cd.mips.gpr[MIPS_GPR_A0] = 2; /* argc */ |
363 |
|
364 |
store_32bit_word(cpu, 0x80000000 + machine->physical_ram_in_mb |
365 |
* 1048576-512 + 4, 0x80000000 + machine->physical_ram_in_mb |
366 |
* 1048576 - 512 + 64); |
367 |
store_32bit_word(cpu, 0x80000000 + machine->physical_ram_in_mb |
368 |
* 1048576 - 512 + 8, 0); |
369 |
|
370 |
snprintf(tmp, tmplen, "root=/dev/rom video=vr4181fb:xres:160,y" |
371 |
"res:240,bpp:4,gray,hpck:3084,inv ether=0,0x03fe0300,eth0"); |
372 |
tmp[tmplen-1] = '\0'; |
373 |
|
374 |
if (!machine->use_x11) |
375 |
snprintf(tmp+strlen(tmp), tmplen-strlen(tmp), |
376 |
" console=ttyS0,115200"); |
377 |
tmp[tmplen-1] = '\0'; |
378 |
|
379 |
if (machine->boot_string_argument[0]) |
380 |
snprintf(tmp+strlen(tmp), tmplen-strlen(tmp), " %s", |
381 |
machine->boot_string_argument); |
382 |
tmp[tmplen-1] = '\0'; |
383 |
|
384 |
store_string(cpu, 0x80000000 + machine->physical_ram_in_mb |
385 |
* 1048576 - 512 + 64, tmp); |
386 |
|
387 |
machine->bootarg = tmp; |
388 |
} else if (machine->boot_string_argument[0]) { |
389 |
cpu->cd.mips.gpr[MIPS_GPR_A0] ++; /* argc */ |
390 |
|
391 |
store_32bit_word(cpu, 0x80000000 + machine->physical_ram_in_mb |
392 |
* 1048576-512 + 4, 0x80000000 + machine->physical_ram_in_mb |
393 |
* 1048576 - 512 + 64); |
394 |
store_32bit_word(cpu, 0x80000000 + machine->physical_ram_in_mb |
395 |
* 1048576 - 512 + 8, 0); |
396 |
|
397 |
store_string(cpu, 0x80000000 + machine->physical_ram_in_mb * |
398 |
1048576 - 512 + 64, machine->boot_string_argument); |
399 |
|
400 |
machine->bootarg = machine->boot_string_argument; |
401 |
} |
402 |
|
403 |
store_16bit_word_in_host(cpu, (unsigned char *)&hpc_bootinfo.length, |
404 |
sizeof(hpc_bootinfo)); |
405 |
store_32bit_word_in_host(cpu, (unsigned char *)&hpc_bootinfo.magic, |
406 |
HPC_BOOTINFO_MAGIC); |
407 |
store_32bit_word_in_host(cpu, (unsigned char *)&hpc_bootinfo.fb_addr, |
408 |
0x80000000 + hpc_fb_addr); |
409 |
store_16bit_word_in_host(cpu, (unsigned char *)&hpc_bootinfo. |
410 |
fb_line_bytes, hpc_fb_xsize_mem * (((hpc_fb_bits-1)|7)+1) / 8); |
411 |
store_16bit_word_in_host(cpu, (unsigned char *)&hpc_bootinfo.fb_width, |
412 |
hpc_fb_xsize); |
413 |
store_16bit_word_in_host(cpu, (unsigned char *)&hpc_bootinfo.fb_height, |
414 |
hpc_fb_ysize); |
415 |
store_16bit_word_in_host(cpu, (unsigned char *)&hpc_bootinfo.fb_type, |
416 |
hpc_fb_encoding); |
417 |
store_16bit_word_in_host(cpu, (unsigned char *)&hpc_bootinfo.bi_cnuse, |
418 |
BI_CNUSE_BUILTIN); /* _BUILTIN or _SERIAL */ |
419 |
|
420 |
/* printf("hpc_bootinfo.platid_cpu = 0x%08x\n", |
421 |
hpc_bootinfo.platid_cpu); |
422 |
printf("hpc_bootinfo.platid_machine = 0x%08x\n", |
423 |
hpc_bootinfo.platid_machine); */ |
424 |
store_32bit_word_in_host(cpu,(unsigned char *)&hpc_bootinfo.timezone,0); |
425 |
store_buf(cpu, 0x80000000 + machine->physical_ram_in_mb * |
426 |
1048576 - 256, (char *)&hpc_bootinfo, sizeof(hpc_bootinfo)); |
427 |
} |
428 |
|
429 |
|
430 |
MACHINE_DEFAULT_CPU(hpcmips) |
431 |
{ |
432 |
switch (machine->machine_subtype) { |
433 |
case MACHINE_HPCMIPS_CASIO_BE300: |
434 |
machine->cpu_name = strdup("VR4131"); |
435 |
break; |
436 |
case MACHINE_HPCMIPS_CASIO_E105: |
437 |
machine->cpu_name = strdup("VR4121"); |
438 |
break; |
439 |
case MACHINE_HPCMIPS_NEC_MOBILEPRO_770: |
440 |
case MACHINE_HPCMIPS_NEC_MOBILEPRO_780: |
441 |
case MACHINE_HPCMIPS_NEC_MOBILEPRO_800: |
442 |
case MACHINE_HPCMIPS_NEC_MOBILEPRO_880: |
443 |
machine->cpu_name = strdup("VR4121"); |
444 |
break; |
445 |
case MACHINE_HPCMIPS_AGENDA_VR3: |
446 |
machine->cpu_name = strdup("VR4181"); |
447 |
break; |
448 |
case MACHINE_HPCMIPS_IBM_WORKPAD_Z50: |
449 |
machine->cpu_name = strdup("VR4121"); |
450 |
break; |
451 |
default:printf("Unimplemented HPCMIPS model?\n"); |
452 |
exit(1); |
453 |
} |
454 |
} |
455 |
|
456 |
|
457 |
MACHINE_DEFAULT_RAM(hpcmips) |
458 |
{ |
459 |
/* Most have 32 MB by default. */ |
460 |
machine->physical_ram_in_mb = 32; |
461 |
|
462 |
switch (machine->machine_subtype) { |
463 |
case MACHINE_HPCMIPS_CASIO_BE300: |
464 |
machine->physical_ram_in_mb = 16; |
465 |
break; |
466 |
case MACHINE_HPCMIPS_CASIO_E105: |
467 |
machine->physical_ram_in_mb = 32; |
468 |
break; |
469 |
case MACHINE_HPCMIPS_AGENDA_VR3: |
470 |
machine->physical_ram_in_mb = 16; |
471 |
break; |
472 |
} |
473 |
} |
474 |
|
475 |
|
476 |
MACHINE_REGISTER(hpcmips) |
477 |
{ |
478 |
MR_DEFAULT(hpcmips, "Handhelp MIPS (HPCmips)", |
479 |
ARCH_MIPS, MACHINE_HPCMIPS); |
480 |
|
481 |
machine_entry_add_alias(me, "hpcmips"); |
482 |
|
483 |
machine_entry_add_subtype(me, "Casio Cassiopeia BE-300", |
484 |
MACHINE_HPCMIPS_CASIO_BE300, "be-300", "be300", NULL); |
485 |
|
486 |
machine_entry_add_subtype(me, "Casio Cassiopeia E-105", |
487 |
MACHINE_HPCMIPS_CASIO_E105, "e-105", "e105", NULL); |
488 |
|
489 |
machine_entry_add_subtype(me, "Agenda VR3", MACHINE_HPCMIPS_AGENDA_VR3, |
490 |
"agenda", "vr3", NULL); |
491 |
|
492 |
machine_entry_add_subtype(me, "IBM WorkPad Z50", |
493 |
MACHINE_HPCMIPS_IBM_WORKPAD_Z50, "workpad", "z50", NULL); |
494 |
|
495 |
machine_entry_add_subtype(me, "NEC MobilePro 770", |
496 |
MACHINE_HPCMIPS_NEC_MOBILEPRO_770, "mobilepro770", NULL); |
497 |
|
498 |
machine_entry_add_subtype(me, "NEC MobilePro 780", |
499 |
MACHINE_HPCMIPS_NEC_MOBILEPRO_780, "mobilepro780", NULL); |
500 |
|
501 |
machine_entry_add_subtype(me, "NEC MobilePro 800", |
502 |
MACHINE_HPCMIPS_NEC_MOBILEPRO_800, "mobilepro800", NULL); |
503 |
|
504 |
machine_entry_add_subtype(me, "NEC MobilePro 880", |
505 |
MACHINE_HPCMIPS_NEC_MOBILEPRO_880, "mobilepro880", NULL); |
506 |
|
507 |
me->set_default_ram = machine_default_ram_hpcmips; |
508 |
} |
509 |
|