src/include/cpu_mips.h

#ifndef CPU_MIPS_H
#define CPU_MIPS_H

/*
 *  Copyright (C) 2003-2005  Anders Gavare.  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions are met:
 *
 *  1. Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *  2. Redistributions in binary form must reproduce the above copyright  
 *     notice, this list of conditions and the following disclaimer in the 
 *     documentation and/or other materials provided with the distribution.
 *  3. The name of the author may not be used to endorse or promote products
 *     derived from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 *  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 *  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE   
 *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 *  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 *  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 *  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 *  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 *  SUCH DAMAGE.
 *
 *
 *  $Id: cpu_mips.h,v 1.16 2005/06/26 22:23:43 debug Exp $
 */

#include "misc.h"

/*  
 *  ENABLE_MIPS16 should be defined on the cc commandline using -D, if you 
 *  want it. (This is done by ./configure --mips16)
 */
/*  #define MFHILO_DELAY  */

struct cpu_family;
struct emul;
struct machine;

/*
 *  CPU type definitions:  See mips_cpu_types.h.
 */

struct mips_cpu_type_def {
        char            *name;
        int             rev;
        int             sub;
        char            flags;
        char            exc_model;              /*  EXC3K or EXC4K  */
        char            mmu_model;              /*  MMU3K or MMU4K  */
        char            isa_level;              /*  1, 2, 3, 4, 5, 32, 64  */
        int             nr_of_tlb_entries;      /*  32, 48, 64, ...  */
        char            instrs_per_cycle;       /*  simplified, 1, 2, or 4  */
        int             default_picache;
        int             default_pdcache;
        int             default_pilinesize;
        int             default_pdlinesize;
        int             default_scache;
        int             default_slinesize;
};

#define INITIAL_PC                      0xffffffffbfc00000ULL
#define INITIAL_STACK_POINTER           (0xffffffffa0008000ULL - 256)


/*
 *  Coproc 0:
 */
#define N_MIPS_COPROC_REGS      32
struct mips_tlb {
        uint64_t        hi;
        uint64_t        lo0;
        uint64_t        lo1;
        uint64_t        mask;
};


/*
 *  Coproc 1:
 */
#define N_MIPS_FCRS             32

struct mips_coproc {
        int             coproc_nr;
        uint64_t        reg[N_MIPS_COPROC_REGS];

        /*  Only for COP0:  */
        struct mips_tlb *tlbs;
        int             nr_of_tlbs;

        /*  Only for COP1:  floating point control registers  */
        /*  (Maybe also for COP0?)  */
        uint64_t        fcr[N_MIPS_FCRS];
};

#define N_MIPS_COPROCS          4

#define N_MIPS_GPRS             32      /*  General purpose registers  */
#define N_MIPS_FPRS             32      /*  Floating point registers  */

/*
 *  These should all be 2 characters wide:
 *
 *  NOTE: These are for 32-bit ABIs. For the 64-bit ABI, registers 8..11
 *  are used to pass arguments and are then called "a4".."a7".
 *
 *  TODO: Should there be two different variants of this? It's not really
 *  possible to figure out in some easy way if the code running was
 *  written for a 32-bit or 64-bit ABI.
 */
#define MIPS_REGISTER_NAMES     { \
        "zr", "at", "v0", "v1", "a0", "a1", "a2", "a3", \
        "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", \
        "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", \
        "t8", "t9", "k0", "k1", "gp", "sp", "fp", "ra"  }

#define MIPS_GPR_ZERO           0               /*  zero  */
#define MIPS_GPR_AT             1               /*  at  */
#define MIPS_GPR_V0             2               /*  v0  */
#define MIPS_GPR_V1             3               /*  v1  */
#define MIPS_GPR_A0             4               /*  a0  */
#define MIPS_GPR_A1             5               /*  a1  */
#define MIPS_GPR_A2             6               /*  a2  */
#define MIPS_GPR_A3             7               /*  a3  */
#define MIPS_GPR_T0             8               /*  t0  */
#define MIPS_GPR_T1             9               /*  t1  */
#define MIPS_GPR_T2             10              /*  t2  */
#define MIPS_GPR_T3             11              /*  t3  */
#define MIPS_GPR_T4             12              /*  t4  */
#define MIPS_GPR_T5             13              /*  t5  */
#define MIPS_GPR_T6             14              /*  t6  */
#define MIPS_GPR_T7             15              /*  t7  */
#define MIPS_GPR_S0             16              /*  s0  */
#define MIPS_GPR_S1             17              /*  s1  */
#define MIPS_GPR_S2             18              /*  s2  */
#define MIPS_GPR_S3             19              /*  s3  */
#define MIPS_GPR_S4             20              /*  s4  */
#define MIPS_GPR_S5             21              /*  s5  */
#define MIPS_GPR_S6             22              /*  s6  */
#define MIPS_GPR_S7             23              /*  s7  */
#define MIPS_GPR_T8             24              /*  t8  */
#define MIPS_GPR_T9             25              /*  t9  */
#define MIPS_GPR_K0             26              /*  k0  */
#define MIPS_GPR_K1             27              /*  k1  */
#define MIPS_GPR_GP             28              /*  gp  */
#define MIPS_GPR_SP             29              /*  sp  */
#define MIPS_GPR_FP             30              /*  fp  */
#define MIPS_GPR_RA             31              /*  ra  */

/*  Meaning of delay_slot:  */
#define NOT_DELAYED             0
#define DELAYED                 1
#define TO_BE_DELAYED           2

#define N_HI6                   64
#define N_SPECIAL               64
#define N_REGIMM                32

/*  Number of "tiny" translation cache entries:  */
#define N_TRANSLATION_CACHE_INSTR       5
#define N_TRANSLATION_CACHE_DATA        5

struct translation_cache_entry {
        int             wf;
        uint64_t        vaddr_pfn;
        uint64_t        paddr;
};

/*  This should be a value which the program counter
    can "never" have:  */
#define PC_LAST_PAGE_IMPOSSIBLE_VALUE   3

/*  An "impossible" paddr:  */
#define IMPOSSIBLE_PADDR                0x1212343456566767ULL

#define DEFAULT_PCACHE_SIZE             15      /*  32 KB  */
#define DEFAULT_PCACHE_LINESIZE         5       /*  32 bytes  */

struct r3000_cache_line {
        uint32_t        tag_paddr;
        int             tag_valid;
};
#define R3000_TAG_VALID         1
#define R3000_TAG_DIRTY         2

struct r4000_cache_line {
        char            dummy;
};

#define BINTRANS_DONT_RUN_NEXT          0x1000000
#define BINTRANS_N_MASK                 0x0ffffff

#define N_SAFE_BINTRANS_LIMIT_SHIFT     14
#define N_SAFE_BINTRANS_LIMIT   ((1 << (N_SAFE_BINTRANS_LIMIT_SHIFT - 1)) - 1)

#define N_BINTRANS_VADDR_TO_HOST        20

/*  Virtual to host address translation tables:  */
struct vth32_table {
        void                    *haddr_entry[1024 * 2];
        uint32_t                paddr_entry[1024];
        uint32_t                *bintrans_chunks[1024];
        struct vth32_table      *next_free;
        int                     refcount;
};

struct mips_cpu {
        struct mips_cpu_type_def cpu_type;

        struct mips_coproc *coproc[N_MIPS_COPROCS];

        int             compare_register_set;

        /*  Special purpose registers:  */
        uint64_t        pc_last;                /*  PC of last instruction   */
        uint64_t        hi;
        uint64_t        lo;

        /*  General purpose registers:  */
        uint64_t        gpr[N_MIPS_GPRS];

        /*
         *  The translation_cached stuff is used to speed up the
         *  most recent lookups into the TLB.  Whenever the TLB is
         *  written to, translation_cached[] must be filled with zeros.
         */
#ifdef USE_TINY_CACHE
        struct translation_cache_entry
                        translation_cache_instr[N_TRANSLATION_CACHE_INSTR];
        struct translation_cache_entry
                        translation_cache_data[N_TRANSLATION_CACHE_DATA];
#endif

        /*
         *  For faster memory lookup when running instructions:
         *
         *  Reading memory to load instructions is a very common thing in the
         *  emulator, and an instruction is very often read from the address
         *  following the previously executed instruction. That means that we
         *  don't have to go through the TLB each time.
         *
         *  We then get the vaddr -> paddr translation for free. There is an
         *  even better case when the paddr is a RAM address (as opposed to an
         *  address in a memory mapped device). Then we can figure out the
         *  address in the host's memory directly, and skip the paddr -> host
         *  address calculation as well.
         *
         *  A modification to the TLB should set the virtual_page variable to
         *  an "impossible" value, so that there won't be a hit on the next
         *  instruction.
         */
        uint64_t        pc_last_virtual_page;
        uint64_t        pc_last_physical_page;
        unsigned char   *pc_last_host_4k_page;

#ifdef BINTRANS
        int             dont_run_next_bintrans;
        int             bintrans_instructions_executed;  /*  set to the
                                number of bintranslated instructions executed
                                when running a bintrans codechunk  */
        int             pc_bintrans_paddr_valid;
        uint64_t        pc_bintrans_paddr;
        unsigned char   *pc_bintrans_host_4kpage;

        /*  Chunk base address:  */
        unsigned char   *chunk_base_address;

        /*  This should work for 32-bit MIPS emulation:  */
        struct vth32_table *vaddr_to_hostaddr_nulltable;
        struct vth32_table *vaddr_to_hostaddr_r2k3k_icachetable;
        struct vth32_table *vaddr_to_hostaddr_r2k3k_dcachetable;
        struct vth32_table **vaddr_to_hostaddr_table0_kernel;
        struct vth32_table **vaddr_to_hostaddr_table0_cacheisol_i;
        struct vth32_table **vaddr_to_hostaddr_table0_cacheisol_d;
        struct vth32_table **vaddr_to_hostaddr_table0_user;
        struct vth32_table **vaddr_to_hostaddr_table0;  /*  should point to kernel or user  */
        struct vth32_table *next_free_vth_table;

        /*  For 64-bit (generic) emulation:  */
        unsigned char   *(*fast_vaddr_to_hostaddr)(struct cpu *cpu,
                            uint64_t vaddr, int writeflag);
        int             bintrans_next_index;
        int             bintrans_data_writable[N_BINTRANS_VADDR_TO_HOST];
        uint64_t        bintrans_data_vaddr[N_BINTRANS_VADDR_TO_HOST];
        unsigned char   *bintrans_data_hostpage[N_BINTRANS_VADDR_TO_HOST];

        void            (*bintrans_load_32bit)(struct cpu *);   /*  Note: incorrect args  */
        void            (*bintrans_store_32bit)(struct cpu *);  /*  Note: incorrect args  */
        void            (*bintrans_jump_to_32bit_pc)(struct cpu *);
        void            (*bintrans_simple_exception)(struct cpu *, int);
        void            (*bintrans_fast_rfe)(struct cpu *);
        void            (*bintrans_fast_eret)(struct cpu *);
        void            (*bintrans_fast_tlbwri)(struct cpu *, int);
        void            (*bintrans_fast_tlbpr)(struct cpu *, int);
#endif

#ifdef ENABLE_MIPS16
        int             mips16;                 /*  non-zero if MIPS16 code is allowed  */
        uint16_t        mips16_extend;          /*  set on 'extend' instructions to the entire 16-bit extend instruction  */
#endif

#ifdef ENABLE_INSTRUCTION_DELAYS
        int             instruction_delay;
#endif

        int             trace_tree_depth;

        uint64_t        delay_jmpaddr;          /*  only used if delay_slot > 0  */
        int             delay_slot;
        int             nullify_next;           /*  set to 1 if next instruction
                                                        is to be nullified  */

        /*  This is set to non-zero, if it is possible at all that an
            interrupt will occur.  */
        int             cached_interrupt_is_possible;

        int             show_trace_delay;       /*  0=normal, > 0 = delay until show_trace  */
        uint64_t        show_trace_addr;

        int             last_was_jumptoself;
        int             jump_to_self_reg;

#ifdef MFHILO_DELAY
        int             mfhi_delay;     /*  instructions since last mfhi  */
        int             mflo_delay;     /*  instructions since last mflo  */
#endif

        int             rmw;            /*  Read-Modify-Write  */
        int             rmw_len;        /*  Length of rmw modification  */
        uint64_t        rmw_addr;       /*  Address of rmw modification  */

        /*
         *  TODO:  The R5900 has 128-bit registers. I'm not really sure
         *  whether they are used a lot or not, at least with code produced
         *  with gcc they are not. An important case however is lq and sq
         *  (load and store of 128-bit values). These "upper halves" of R5900
         *  quadwords can be used in those cases.
         *
         *  TODO:  Generalize this.
         */
        uint64_t        gpr_quadhi[N_MIPS_GPRS];


        /*
         *  Statistics:
         */
        long            stats_opcode[N_HI6];
        long            stats__special[N_SPECIAL];
        long            stats__regimm[N_REGIMM];
        long            stats__special2[N_SPECIAL];

        /*  Data and Instruction caches:  */
        unsigned char   *cache[2];
        void            *cache_tags[2];
        uint64_t        cache_last_paddr[2];
        int             cache_size[2];
        int             cache_linesize[2];
        int             cache_mask[2];
        int             cache_miss_penalty[2];

        /*  Other stuff:  */
        uint64_t        cop0_config_select1;
};


/*  cpu_mips.c:  */
void mips_cpu_show_full_statistics(struct machine *m);
void mips_cpu_tlbdump(struct machine *m, int x, int rawflag);
void mips_cpu_register_match(struct machine *m, char *name, 
        int writeflag, uint64_t *valuep, int *match_register);
void mips_cpu_register_dump(struct cpu *cpu, int gprs, int coprocs);
int mips_cpu_disassemble_instr(struct cpu *cpu, unsigned char *instr,
        int running, uint64_t addr, int bintrans);
int mips_cpu_interrupt(struct cpu *cpu, uint64_t irq_nr);
int mips_cpu_interrupt_ack(struct cpu *cpu, uint64_t irq_nr);
void mips_cpu_exception(struct cpu *cpu, int exccode, int tlb, uint64_t vaddr,
        /*  uint64_t pagemask,  */  int coproc_nr, uint64_t vaddr_vpn2,
        int vaddr_asid, int x_64);
void mips_cpu_cause_simple_exception(struct cpu *cpu, int exc_code);
int mips_cpu_run(struct emul *emul, struct machine *machine);
void mips_cpu_dumpinfo(struct cpu *cpu);
void mips_cpu_list_available_types(void);
int mips_cpu_family_init(struct cpu_family *);


/*  cpu_mips_coproc.c:  */
struct mips_coproc *mips_coproc_new(struct cpu *cpu, int coproc_nr);
void mips_coproc_tlb_set_entry(struct cpu *cpu, int entrynr, int size,
        uint64_t vaddr, uint64_t paddr0, uint64_t paddr1,
        int valid0, int valid1, int dirty0, int dirty1, int global, int asid,
        int cachealgo0, int cachealgo1);
void update_translation_table(struct cpu *cpu, uint64_t vaddr_page,
        unsigned char *host_page, int writeflag, uint64_t paddr_page);
void clear_all_chunks_from_all_tables(struct cpu *cpu);
void mips_invalidate_translation_caches_paddr(struct cpu *cpu, uint64_t paddr);
void coproc_register_read(struct cpu *cpu,
        struct mips_coproc *cp, int reg_nr, uint64_t *ptr, int select);
void coproc_register_write(struct cpu *cpu,
        struct mips_coproc *cp, int reg_nr, uint64_t *ptr, int flag64,
        int select);
void coproc_tlbpr(struct cpu *cpu, int readflag);
void coproc_tlbwri(struct cpu *cpu, int randomflag);
void coproc_rfe(struct cpu *cpu);
void coproc_eret(struct cpu *cpu);
void coproc_function(struct cpu *cpu, struct mips_coproc *cp, int cpnr,
        uint32_t function, int unassemble_only, int running);


/*  memory_mips.c:  */
int memory_cache_R3000(struct cpu *cpu, int cache, uint64_t paddr,
        int writeflag, size_t len, unsigned char *data);
int mips_memory_rw(struct cpu *cpu, struct memory *mem, uint64_t vaddr,
        unsigned char *data, size_t len, int writeflag, int cache_flags);


/*  mips16.c:  */
int mips16_to_32(struct cpu *cpu, unsigned char *instr16, unsigned char *instr);


#endif  /*  CPU_MIPS_H  */
1	#ifndef CPU_MIPS_H
2	#define CPU_MIPS_H
3
4	/*
5	* Copyright (C) 2003-2005 Anders Gavare. All rights reserved.
6	*
7	* Redistribution and use in source and binary forms, with or without
8	* modification, are permitted provided that the following conditions are met:
9	*
10	* 1. Redistributions of source code must retain the above copyright
11	* notice, this list of conditions and the following disclaimer.
12	* 2. Redistributions in binary form must reproduce the above copyright
13	* notice, this list of conditions and the following disclaimer in the
14	* documentation and/or other materials provided with the distribution.
15	* 3. The name of the author may not be used to endorse or promote products
16	* derived from this software without specific prior written permission.
17	*
18	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19	* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21	* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26	* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27	* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28	* SUCH DAMAGE.
29	*
30	*
31	* $Id: cpu_mips.h,v 1.16 2005/06/26 22:23:43 debug Exp $
32	*/
33
34	#include "misc.h"
35
36	/*
37	* ENABLE_MIPS16 should be defined on the cc commandline using -D, if you
38	* want it. (This is done by ./configure --mips16)
39	*/
40	/* #define MFHILO_DELAY */
41
42	struct cpu_family;
43	struct emul;
44	struct machine;
45
46	/*
47	* CPU type definitions: See mips_cpu_types.h.
48	*/
49
50	struct mips_cpu_type_def {
51	char *name;
52	int rev;
53	int sub;
54	char flags;
55	char exc_model; /* EXC3K or EXC4K */
56	char mmu_model; /* MMU3K or MMU4K */
57	char isa_level; /* 1, 2, 3, 4, 5, 32, 64 */
58	int nr_of_tlb_entries; /* 32, 48, 64, ... */
59	char instrs_per_cycle; /* simplified, 1, 2, or 4 */
60	int default_picache;
61	int default_pdcache;
62	int default_pilinesize;
63	int default_pdlinesize;
64	int default_scache;
65	int default_slinesize;
66	};
67
68	#define INITIAL_PC 0xffffffffbfc00000ULL
69	#define INITIAL_STACK_POINTER (0xffffffffa0008000ULL - 256)
70
71
72	/*
73	* Coproc 0:
74	*/
75	#define N_MIPS_COPROC_REGS 32
76	struct mips_tlb {
77	uint64_t hi;
78	uint64_t lo0;
79	uint64_t lo1;
80	uint64_t mask;
81	};
82
83
84	/*
85	* Coproc 1:
86	*/
87	#define N_MIPS_FCRS 32
88
89	struct mips_coproc {
90	int coproc_nr;
91	uint64_t reg[N_MIPS_COPROC_REGS];
92
93	/* Only for COP0: */
94	struct mips_tlb *tlbs;
95	int nr_of_tlbs;
96
97	/* Only for COP1: floating point control registers */
98	/* (Maybe also for COP0?) */
99	uint64_t fcr[N_MIPS_FCRS];
100	};
101
102	#define N_MIPS_COPROCS 4
103
104	#define N_MIPS_GPRS 32 /* General purpose registers */
105	#define N_MIPS_FPRS 32 /* Floating point registers */
106
107	/*
108	* These should all be 2 characters wide:
109	*
110	* NOTE: These are for 32-bit ABIs. For the 64-bit ABI, registers 8..11
111	* are used to pass arguments and are then called "a4".."a7".
112	*
113	* TODO: Should there be two different variants of this? It's not really
114	* possible to figure out in some easy way if the code running was
115	* written for a 32-bit or 64-bit ABI.
116	*/
117	#define MIPS_REGISTER_NAMES { \
118	"zr", "at", "v0", "v1", "a0", "a1", "a2", "a3", \
119	"t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", \
120	"s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", \
121	"t8", "t9", "k0", "k1", "gp", "sp", "fp", "ra" }
122
123	#define MIPS_GPR_ZERO 0 /* zero */
124	#define MIPS_GPR_AT 1 /* at */
125	#define MIPS_GPR_V0 2 /* v0 */
126	#define MIPS_GPR_V1 3 /* v1 */
127	#define MIPS_GPR_A0 4 /* a0 */
128	#define MIPS_GPR_A1 5 /* a1 */
129	#define MIPS_GPR_A2 6 /* a2 */
130	#define MIPS_GPR_A3 7 /* a3 */
131	#define MIPS_GPR_T0 8 /* t0 */
132	#define MIPS_GPR_T1 9 /* t1 */
133	#define MIPS_GPR_T2 10 /* t2 */
134	#define MIPS_GPR_T3 11 /* t3 */
135	#define MIPS_GPR_T4 12 /* t4 */
136	#define MIPS_GPR_T5 13 /* t5 */
137	#define MIPS_GPR_T6 14 /* t6 */
138	#define MIPS_GPR_T7 15 /* t7 */
139	#define MIPS_GPR_S0 16 /* s0 */
140	#define MIPS_GPR_S1 17 /* s1 */
141	#define MIPS_GPR_S2 18 /* s2 */
142	#define MIPS_GPR_S3 19 /* s3 */
143	#define MIPS_GPR_S4 20 /* s4 */
144	#define MIPS_GPR_S5 21 /* s5 */
145	#define MIPS_GPR_S6 22 /* s6 */
146	#define MIPS_GPR_S7 23 /* s7 */
147	#define MIPS_GPR_T8 24 /* t8 */
148	#define MIPS_GPR_T9 25 /* t9 */
149	#define MIPS_GPR_K0 26 /* k0 */
150	#define MIPS_GPR_K1 27 /* k1 */
151	#define MIPS_GPR_GP 28 /* gp */
152	#define MIPS_GPR_SP 29 /* sp */
153	#define MIPS_GPR_FP 30 /* fp */
154	#define MIPS_GPR_RA 31 /* ra */
155
156	/* Meaning of delay_slot: */
157	#define NOT_DELAYED 0
158	#define DELAYED 1
159	#define TO_BE_DELAYED 2
160
161	#define N_HI6 64
162	#define N_SPECIAL 64
163	#define N_REGIMM 32
164
165	/* Number of "tiny" translation cache entries: */
166	#define N_TRANSLATION_CACHE_INSTR 5
167	#define N_TRANSLATION_CACHE_DATA 5
168
169	struct translation_cache_entry {
170	int wf;
171	uint64_t vaddr_pfn;
172	uint64_t paddr;
173	};
174
175	/* This should be a value which the program counter
176	can "never" have: */
177	#define PC_LAST_PAGE_IMPOSSIBLE_VALUE 3
178
179	/* An "impossible" paddr: */
180	#define IMPOSSIBLE_PADDR 0x1212343456566767ULL
181
182	#define DEFAULT_PCACHE_SIZE 15 /* 32 KB */
183	#define DEFAULT_PCACHE_LINESIZE 5 /* 32 bytes */
184
185	struct r3000_cache_line {
186	uint32_t tag_paddr;
187	int tag_valid;
188	};
189	#define R3000_TAG_VALID 1
190	#define R3000_TAG_DIRTY 2
191
192	struct r4000_cache_line {
193	char dummy;
194	};
195
196	#define BINTRANS_DONT_RUN_NEXT 0x1000000
197	#define BINTRANS_N_MASK 0x0ffffff
198
199	#define N_SAFE_BINTRANS_LIMIT_SHIFT 14
200	#define N_SAFE_BINTRANS_LIMIT ((1 << (N_SAFE_BINTRANS_LIMIT_SHIFT - 1)) - 1)
201
202	#define N_BINTRANS_VADDR_TO_HOST 20
203
204	/* Virtual to host address translation tables: */
205	struct vth32_table {
206	void haddr_entry[1024 2];
207	uint32_t paddr_entry[1024];
208	uint32_t *bintrans_chunks[1024];
209	struct vth32_table *next_free;
210	int refcount;
211	};
212
213	struct mips_cpu {
214	struct mips_cpu_type_def cpu_type;
215
216	struct mips_coproc *coproc[N_MIPS_COPROCS];
217
218	int compare_register_set;
219
220	/* Special purpose registers: */
221	uint64_t pc_last; /* PC of last instruction */
222	uint64_t hi;
223	uint64_t lo;
224
225	/* General purpose registers: */
226	uint64_t gpr[N_MIPS_GPRS];
227
228	/*
229	* The translation_cached stuff is used to speed up the
230	* most recent lookups into the TLB. Whenever the TLB is
231	* written to, translation_cached[] must be filled with zeros.
232	*/
233	#ifdef USE_TINY_CACHE
234	struct translation_cache_entry
235	translation_cache_instr[N_TRANSLATION_CACHE_INSTR];
236	struct translation_cache_entry
237	translation_cache_data[N_TRANSLATION_CACHE_DATA];
238	#endif
239
240	/*
241	* For faster memory lookup when running instructions:
242	*
243	* Reading memory to load instructions is a very common thing in the
244	* emulator, and an instruction is very often read from the address
245	* following the previously executed instruction. That means that we
246	* don't have to go through the TLB each time.
247	*
248	* We then get the vaddr -> paddr translation for free. There is an
249	* even better case when the paddr is a RAM address (as opposed to an
250	* address in a memory mapped device). Then we can figure out the
251	* address in the host's memory directly, and skip the paddr -> host
252	* address calculation as well.
253	*
254	* A modification to the TLB should set the virtual_page variable to
255	* an "impossible" value, so that there won't be a hit on the next
256	* instruction.
257	*/
258	uint64_t pc_last_virtual_page;
259	uint64_t pc_last_physical_page;
260	unsigned char *pc_last_host_4k_page;
261
262	#ifdef BINTRANS
263	int dont_run_next_bintrans;
264	int bintrans_instructions_executed; /* set to the
265	number of bintranslated instructions executed
266	when running a bintrans codechunk */
267	int pc_bintrans_paddr_valid;
268	uint64_t pc_bintrans_paddr;
269	unsigned char *pc_bintrans_host_4kpage;
270
271	/* Chunk base address: */
272	unsigned char *chunk_base_address;
273
274	/* This should work for 32-bit MIPS emulation: */
275	struct vth32_table *vaddr_to_hostaddr_nulltable;
276	struct vth32_table *vaddr_to_hostaddr_r2k3k_icachetable;
277	struct vth32_table *vaddr_to_hostaddr_r2k3k_dcachetable;
278	struct vth32_table **vaddr_to_hostaddr_table0_kernel;
279	struct vth32_table **vaddr_to_hostaddr_table0_cacheisol_i;
280	struct vth32_table **vaddr_to_hostaddr_table0_cacheisol_d;
281	struct vth32_table **vaddr_to_hostaddr_table0_user;
282	struct vth32_table *vaddr_to_hostaddr_table0; / should point to kernel or user */
283	struct vth32_table *next_free_vth_table;
284
285	/* For 64-bit (generic) emulation: */
286	unsigned char (fast_vaddr_to_hostaddr)(struct cpu *cpu,
287	uint64_t vaddr, int writeflag);
288	int bintrans_next_index;
289	int bintrans_data_writable[N_BINTRANS_VADDR_TO_HOST];
290	uint64_t bintrans_data_vaddr[N_BINTRANS_VADDR_TO_HOST];
291	unsigned char *bintrans_data_hostpage[N_BINTRANS_VADDR_TO_HOST];
292
293	void (bintrans_load_32bit)(struct cpu ); /* Note: incorrect args */
294	void (bintrans_store_32bit)(struct cpu ); /* Note: incorrect args */
295	void (bintrans_jump_to_32bit_pc)(struct cpu );
296	void (bintrans_simple_exception)(struct cpu , int);
297	void (bintrans_fast_rfe)(struct cpu );
298	void (bintrans_fast_eret)(struct cpu );
299	void (bintrans_fast_tlbwri)(struct cpu , int);
300	void (bintrans_fast_tlbpr)(struct cpu , int);
301	#endif
302
303	#ifdef ENABLE_MIPS16
304	int mips16; /* non-zero if MIPS16 code is allowed */
305	uint16_t mips16_extend; /* set on 'extend' instructions to the entire 16-bit extend instruction */
306	#endif
307
308	#ifdef ENABLE_INSTRUCTION_DELAYS
309	int instruction_delay;
310	#endif
311
312	int trace_tree_depth;
313
314	uint64_t delay_jmpaddr; /* only used if delay_slot > 0 */
315	int delay_slot;
316	int nullify_next; /* set to 1 if next instruction
317	is to be nullified */
318
319	/* This is set to non-zero, if it is possible at all that an
320	interrupt will occur. */
321	int cached_interrupt_is_possible;
322
323	int show_trace_delay; /* 0=normal, > 0 = delay until show_trace */
324	uint64_t show_trace_addr;
325
326	int last_was_jumptoself;
327	int jump_to_self_reg;
328
329	#ifdef MFHILO_DELAY
330	int mfhi_delay; /* instructions since last mfhi */
331	int mflo_delay; /* instructions since last mflo */
332	#endif
333
334	int rmw; /* Read-Modify-Write */
335	int rmw_len; /* Length of rmw modification */
336	uint64_t rmw_addr; /* Address of rmw modification */
337
338	/*
339	* TODO: The R5900 has 128-bit registers. I'm not really sure
340	* whether they are used a lot or not, at least with code produced
341	* with gcc they are not. An important case however is lq and sq
342	* (load and store of 128-bit values). These "upper halves" of R5900
343	* quadwords can be used in those cases.
344	*
345	* TODO: Generalize this.
346	*/
347	uint64_t gpr_quadhi[N_MIPS_GPRS];
348
349
350	/*
351	* Statistics:
352	*/
353	long stats_opcode[N_HI6];
354	long stats__special[N_SPECIAL];
355	long stats__regimm[N_REGIMM];
356	long stats__special2[N_SPECIAL];
357
358	/* Data and Instruction caches: */
359	unsigned char *cache[2];
360	void *cache_tags[2];
361	uint64_t cache_last_paddr[2];
362	int cache_size[2];
363	int cache_linesize[2];
364	int cache_mask[2];
365	int cache_miss_penalty[2];
366
367	/* Other stuff: */
368	uint64_t cop0_config_select1;
369	};
370
371
372	/* cpu_mips.c: */
373	void mips_cpu_show_full_statistics(struct machine *m);
374	void mips_cpu_tlbdump(struct machine *m, int x, int rawflag);
375	void mips_cpu_register_match(struct machine m, char name,
376	int writeflag, uint64_t valuep, int match_register);
377	void mips_cpu_register_dump(struct cpu *cpu, int gprs, int coprocs);
378	int mips_cpu_disassemble_instr(struct cpu cpu, unsigned char instr,
379	int running, uint64_t addr, int bintrans);
380	int mips_cpu_interrupt(struct cpu *cpu, uint64_t irq_nr);
381	int mips_cpu_interrupt_ack(struct cpu *cpu, uint64_t irq_nr);
382	void mips_cpu_exception(struct cpu *cpu, int exccode, int tlb, uint64_t vaddr,
383	/* uint64_t pagemask, */ int coproc_nr, uint64_t vaddr_vpn2,
384	int vaddr_asid, int x_64);
385	void mips_cpu_cause_simple_exception(struct cpu *cpu, int exc_code);
386	int mips_cpu_run(struct emul emul, struct machine machine);
387	void mips_cpu_dumpinfo(struct cpu *cpu);
388	void mips_cpu_list_available_types(void);
389	int mips_cpu_family_init(struct cpu_family *);
390
391
392	/* cpu_mips_coproc.c: */
393	struct mips_coproc mips_coproc_new(struct cpu cpu, int coproc_nr);
394	void mips_coproc_tlb_set_entry(struct cpu *cpu, int entrynr, int size,
395	uint64_t vaddr, uint64_t paddr0, uint64_t paddr1,
396	int valid0, int valid1, int dirty0, int dirty1, int global, int asid,
397	int cachealgo0, int cachealgo1);
398	void update_translation_table(struct cpu *cpu, uint64_t vaddr_page,
399	unsigned char *host_page, int writeflag, uint64_t paddr_page);
400	void clear_all_chunks_from_all_tables(struct cpu *cpu);
401	void mips_invalidate_translation_caches_paddr(struct cpu *cpu, uint64_t paddr);
402	void coproc_register_read(struct cpu *cpu,
403	struct mips_coproc cp, int reg_nr, uint64_t ptr, int select);
404	void coproc_register_write(struct cpu *cpu,
405	struct mips_coproc cp, int reg_nr, uint64_t ptr, int flag64,
406	int select);
407	void coproc_tlbpr(struct cpu *cpu, int readflag);
408	void coproc_tlbwri(struct cpu *cpu, int randomflag);
409	void coproc_rfe(struct cpu *cpu);
410	void coproc_eret(struct cpu *cpu);
411	void coproc_function(struct cpu cpu, struct mips_coproc cp, int cpnr,
412	uint32_t function, int unassemble_only, int running);
413
414
415	/* memory_mips.c: */
416	int memory_cache_R3000(struct cpu *cpu, int cache, uint64_t paddr,
417	int writeflag, size_t len, unsigned char *data);
418	int mips_memory_rw(struct cpu cpu, struct memory mem, uint64_t vaddr,
419	unsigned char *data, size_t len, int writeflag, int cache_flags);
420
421
422	/* mips16.c: */
423	int mips16_to_32(struct cpu cpu, unsigned char instr16, unsigned char *instr);
424
425
426	#endif /* CPU_MIPS_H */