src/include/cpu.h

#ifndef CPU_H
#define CPU_H

/*
 *  Copyright (C) 2005-2007  Anders Gavare.  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions are met:
 *
 *  1. Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *  2. Redistributions in binary form must reproduce the above copyright  
 *     notice, this list of conditions and the following disclaimer in the 
 *     documentation and/or other materials provided with the distribution.
 *  3. The name of the author may not be used to endorse or promote products
 *     derived from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 *  ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 *  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE   
 *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 *  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 *  OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *  HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 *  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 *  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 *  SUCH DAMAGE.
 *
 *
 *  $Id: cpu.h,v 1.109 2007/02/10 14:29:54 debug Exp $
 *
 *  CPU-related definitions.
 */


#include <sys/types.h>
#include <inttypes.h>
#include <sys/time.h>

/*  This is needed for undefining 'mips', 'ppc' etc. on weird systems:  */
#include "../../config.h"

/*
 *  Dyntrans misc declarations, used throughout the dyntrans code.
 *
 *  Note that there is place for all instruction calls within a page,
 *  and then 2 more. The first one of these "extra" instruction slots is
 *  the end-of-page slot. It transfers control to the first instruction
 *  slot on the next (virtual) page.
 *
 *  The second of these extra instruction slots is an additional 
 *  end-of-page slot for delay-slot architectures. On e.g. MIPS, a branch
 *  instruction can "nullify" (skip) the delay-slot. If the end-of-page
 *  slot is skipped, then we end up one step after that. That's where the
 *  end_of_page2 slot is. :)
 *
 *  next_ofs points to the next page in a chain of possible pages.
 *  (several pages can be in the same chain, but only one matches the
 *  specific physaddr.)
 *
 *  translations is a tiny bitmap indicating which parts of the page have
 *  actual translations. Bit 0 corresponds to the lowest 1/32th of the page,
 *  bit 1 to the second-lowest 1/32th, and so on.
 */
#define DYNTRANS_MISC_DECLARATIONS(arch,ARCH,addrtype)  struct \
        arch ## _instr_call {                                   \
                void    (*f)(struct cpu *, struct arch ## _instr_call *); \
                size_t  arg[ARCH ## _N_IC_ARGS];                        \
        };                                                              \
                                                                        \
        /*  Translation cache struct for each physical page:  */        \
        struct arch ## _tc_physpage {                                   \
                struct arch ## _instr_call ics[ARCH ## _IC_ENTRIES_PER_PAGE+2];\
                uint32_t        next_ofs;       /*  (0 for end of chain)  */ \
                uint32_t        translations;                           \
                addrtype        physaddr;                               \
        };                                                              \
                                                                        \
        struct arch ## _vpg_tlb_entry {                                 \
                uint8_t         valid;                                  \
                uint8_t         writeflag;                              \
                addrtype        vaddr_page;                             \
                addrtype        paddr_page;                             \
                unsigned char   *host_page;                             \
        };

#define DYNTRANS_MISC64_DECLARATIONS(arch,ARCH,tlbindextype)            \
        struct arch ## _l3_64_table {                                   \
                unsigned char   *host_load[1 << ARCH ## _L3N];          \
                unsigned char   *host_store[1 << ARCH ## _L3N];         \
                uint64_t        phys_addr[1 << ARCH ## _L3N];           \
                tlbindextype    vaddr_to_tlbindex[1 << ARCH ## _L3N];   \
                struct arch ## _tc_physpage *phys_page[1 << ARCH ## _L3N]; \
                struct arch ## _l3_64_table     *next;                  \
                int             refcount;                               \
        };                                                              \
        struct arch ## _l2_64_table {                                   \
                struct arch ## _l3_64_table     *l3[1 << ARCH ## _L2N]; \
                struct arch ## _l2_64_table     *next;                  \
                int                             refcount;               \
        };

/*
 *  Dyntrans "Instruction Translation Cache":
 *
 *  cur_physpage is a pointer to the current physpage. (It _HAPPENS_ to
 *  be the same as cur_ic_page, because all the instrcalls should be placed
 *  first in the physpage struct!)
 *
 *  cur_ic_page is a pointer to an array of xxx_IC_ENTRIES_PER_PAGE
 *  instruction call entries.
 *
 *  next_ic points to the next such instruction call to be executed.
 *
 *  combination_check, when set to non-NULL, is executed automatically after
 *  an instruction has been translated. (It check for combinations of
 *  instructions; low_addr is the offset of the translated instruction in the
 *  current page, NOT shifted right.)
 */
#define DYNTRANS_ITC(arch)      struct arch ## _tc_physpage *cur_physpage;  \
                                struct arch ## _instr_call  *cur_ic_page;   \
                                struct arch ## _instr_call  *next_ic;       \
                                struct arch ## _tc_physpage *physpage_template;\
                                void (*combination_check)(struct cpu *,     \
                                    struct arch ## _instr_call *, int low_addr);

/*
 *  Virtual -> physical -> host address translation TLB entries:
 *  ------------------------------------------------------------
 *
 *  Regardless of whether 32-bit or 64-bit address translation is used, the
 *  same TLB entry structure is used.
 */
#define VPH_TLBS(arch,ARCH)                                             \
        struct arch ## _vpg_tlb_entry                                   \
            vph_tlb_entry[ARCH ## _MAX_VPH_TLB_ENTRIES];

/*
 *  32-bit dyntrans emulated Virtual -> physical -> host address translation:
 *  -------------------------------------------------------------------------
 *
 *  This stuff assumes that 4 KB pages are used. 20 bits to select a page
 *  means just 1 M entries needed. This is small enough that a couple of
 *  full-size tables can fit in virtual memory on modern hosts (both 32-bit
 *  and 64-bit hosts). :-)
 *
 *  Usage: e.g. VPH32(arm,ARM,uint32_t,uint8_t)
 *           or VPH32(sparc,SPARC,uint64_t,uint16_t)
 *
 *  The vph_tlb_entry entries are cpu dependent tlb entries.
 *
 *  The host_load and host_store entries point to host pages; the phys_addr
 *  entries are uint32_t or uint64_t (emulated physical addresses).
 *
 *  phys_page points to translation cache physpages.
 *
 *  vaddr_to_tlbindex is a virtual address to tlb index hint table.
 *  The values in this array are the tlb index plus 1, so a value of, say,
 *  3 means tlb index 2. A value of 0 would mean a tlb index of -1, which
 *  is not a valid index. (I.e. no hit.)
 */
#define N_VPH32_ENTRIES         1048576
#define VPH32(arch,ARCH,paddrtype,tlbindextype)                         \
        unsigned char           *host_load[N_VPH32_ENTRIES];            \
        unsigned char           *host_store[N_VPH32_ENTRIES];           \
        paddrtype               phys_addr[N_VPH32_ENTRIES];             \
        struct arch ## _tc_physpage  *phys_page[N_VPH32_ENTRIES];       \
        tlbindextype            vaddr_to_tlbindex[N_VPH32_ENTRIES];

/*
 *  64-bit dyntrans emulated Virtual -> physical -> host address translation:
 *  -------------------------------------------------------------------------
 *
 *  Usage: e.g. VPH64(alpha,ALPHA,uint8_t)
 *           or VPH64(sparc,SPARC,uint16_t)
 *
 *  l1_64 is an array containing poiners to l2 tables.
 *
 *  l2_64_dummy is a pointer to a "dummy l2 table". Instead of having NULL
 *  pointers in l1_64 for unused slots, a pointer to the dummy table can be
 *  used.
 */
#define DYNTRANS_L1N            17
#define VPH64(arch,ARCH,tlbindextype)                                   \
        struct arch ## _l3_64_table     *l3_64_dummy;                   \
        struct arch ## _l3_64_table     *next_free_l3;                  \
        struct arch ## _l2_64_table     *l2_64_dummy;                   \
        struct arch ## _l2_64_table     *next_free_l2;                  \
        struct arch ## _l2_64_table     *l1_64[1 << DYNTRANS_L1N];


/*  Include all CPUs' header files here:  */
#include "cpu_alpha.h"
#include "cpu_arm.h"
#include "cpu_avr.h"
#include "cpu_m68k.h"
#include "cpu_mips.h"
#include "cpu_ppc.h"
#include "cpu_rca180x.h"
#include "cpu_sh.h"
#include "cpu_sparc.h"
#include "cpu_transputer.h"

struct cpu;
struct emul;
struct machine;
struct memory;
struct settings;


/*
 *  cpu_family
 *  ----------
 *
 *  This structure consists of various pointers to functions, performing
 *  architecture-specific functions.
 *
 *  Except for the next and arch fields at the top, all fields in the
 *  cpu_family struct are filled in by ecah CPU family's init function.
 */
struct cpu_family {
        struct cpu_family       *next;
        int                     arch;

        /*  Familty name, e.g. "MIPS", "Alpha" etc.  */
        char                    *name;

        /*  Fill in architecture specific parts of a struct cpu.  */
        int                     (*cpu_new)(struct cpu *cpu, struct memory *mem,
                                    struct machine *machine,
                                    int cpu_id, char *cpu_type_name);

        /*  Initialize various translation tables.  */
        void                    (*init_tables)(struct cpu *cpu);

        /*  List available CPU types for this architecture.  */
        void                    (*list_available_types)(void);

        /*  Disassemble an instruction.  */
        int                     (*disassemble_instr)(struct cpu *cpu,
                                    unsigned char *instr, int running,
                                    uint64_t dumpaddr);

        /*  Dump CPU registers in readable format.  */
        void                    (*register_dump)(struct cpu *cpu,
                                    int gprs, int coprocs);

        /*  Dump generic CPU info in readable format.  */
        void                    (*dumpinfo)(struct cpu *cpu);

        /*  Dump TLB data for CPU id x.  */
        void                    (*tlbdump)(struct machine *m, int x,
                                    int rawflag);

        /*  Print architecture-specific function call arguments.
            (This is called for each function call, if running with -t.)  */
        void                    (*functioncall_trace)(struct cpu *,
                                    uint64_t f, int n_args);

        /*  GDB command handler.  */
        char                    *(*gdb_stub)(struct cpu *, char *cmd);
};


/*
 *  More dyntrans stuff:
 *
 *  The translation cache begins with N_BASE_TABLE_ENTRIES uint32_t offsets
 *  into the cache, for possible translation cache structs for physical pages.
 */

/*  Meaning of delay_slot:  */
#define NOT_DELAYED                     0
#define DELAYED                         1
#define TO_BE_DELAYED                   2
#define EXCEPTION_IN_DELAY_SLOT         8

#define N_SAFE_DYNTRANS_LIMIT_SHIFT     14
#define N_SAFE_DYNTRANS_LIMIT   ((1 << (N_SAFE_DYNTRANS_LIMIT_SHIFT - 1)) - 1)

#define DEFAULT_DYNTRANS_CACHE_SIZE     (40*1048576)
#define DYNTRANS_CACHE_MARGIN           200000

#define N_BASE_TABLE_ENTRIES            32768
#define PAGENR_TO_TABLE_INDEX(a)        ((a) & (N_BASE_TABLE_ENTRIES-1))


/*
 *  The generic CPU struct:
 */

struct cpu {
        /*  Pointer back to the machine this CPU is in:  */
        struct machine  *machine;

        /*  Settings:  */
        struct settings *settings;

        /*  CPU-specific name, e.g. "R2000", "21164PC", etc.  */
        char            *name;

        /*  Full "path" to the CPU, e.g. "emul[0].machine[0].cpu[0]":  */
        char            *path;

        /*  EMUL_LITTLE_ENDIAN or EMUL_BIG_ENDIAN.  */
        int             byte_order;

        /*  0-based CPU id, in an emulated SMP system.  */
        int             cpu_id;

        /*  0 for emulated 64-bit CPUs, 1 for 32-bit.  */
        int             is_32bit;

        /*  1 while running, 0 when paused/stopped.  */
        int             running;

        /*  A pointer to the main memory connected to this CPU.  */
        struct memory   *mem;

        int             (*run_instr)(struct cpu *cpu);
        int             (*memory_rw)(struct cpu *cpu,
                            struct memory *mem, uint64_t vaddr,
                            unsigned char *data, size_t len,
                            int writeflag, int cache_flags);
        int             (*translate_v2p)(struct cpu *, uint64_t vaddr,
                            uint64_t *return_paddr, int flags);
        void            (*update_translation_table)(struct cpu *,
                            uint64_t vaddr_page, unsigned char *host_page,
                            int writeflag, uint64_t paddr_page);
        void            (*invalidate_translation_caches)(struct cpu *,
                            uint64_t paddr, int flags);
        void            (*invalidate_code_translation)(struct cpu *,
                            uint64_t paddr, int flags);
        void            (*useremul_syscall)(struct cpu *cpu, uint32_t code);
        int             (*instruction_has_delayslot)(struct cpu *cpu,
                            unsigned char *ib);

        /*  The program counter. (For 32-bit modes, not all bits are used.)  */
        uint64_t        pc;

        /*  See comment further up.  */
        int             delay_slot;

        /*  The current depth of function call tracing.  */
        int             trace_tree_depth;

        /*
         *  If is_halted is true when an interrupt trap occurs, the pointer
         *  to the next instruction to execute will be the instruction
         *  following the halt instruction, not the halt instrucion itself.
         *
         *  If has_been_idling is true when printing the number of executed
         *  instructions per second, "idling" is printed instead. (The number
         *  of instrs per second when idling is meaningless anyway.)
         */
        int             is_halted;
        int             has_been_idling;

        /*
         *  Dynamic translation:
         *
         *  The number of translated instructions is assumed to be 1 per
         *  instruction call. For each case where this differs from the
         *  truth, n_translated_instrs should be modified. E.g. if 1000
         *  instruction calls are done, and n_translated_instrs is 50, then
         *  1050 emulated instructions were actually executed.
         *
         *  Note that it can also be adjusted negatively, that is, the way
         *  to "get out" of a dyntrans loop is to set the current instruction
         *  call pointer to the "nothing" instruction. This instruction
         *  _decreases_ n_translated_instrs. That way, once the dyntrans loop
         *  exits, only real instructions will be counted, and not the
         *  "nothing" instructions.
         *
         *  The translation cache is a relative large chunk of memory (say,
         *  32 MB) which is used for translations. When it has been used up,
         *  everything restarts from scratch.
         *
         *  When translating to native code, currently_translating_to_native
         *  is non-zero, and native_code_function_pointer points to the
         *  "ic->f" which will be modified (once the translation has finished)
         *  to point to the newly translated code.
         */
        int             n_translated_instrs;
        unsigned char   *translation_cache;
        size_t          translation_cache_cur_ofs;
        int             currently_translating_to_native;
        int             nr_of_instructions_translated_to_native;
        unsigned char   *native_cur_output_ptr;
        void            **native_code_function_pointer;

        /*
         *  CPU-family dependent:
         *
         *  These contain everything ranging from registers, memory management,
         *  status words, etc.
         */
        union {
                struct alpha_cpu      alpha;
                struct arm_cpu        arm;
                struct avr_cpu        avr;
                struct m68k_cpu       m68k;
                struct mips_cpu       mips;
                struct ppc_cpu        ppc;
                struct rca180x_cpu    rca180x;
                struct sh_cpu         sh;
                struct sparc_cpu      sparc;
                struct transputer_cpu transputer;
        } cd;
};


/*  cpu.c:  */
struct cpu *cpu_new(struct memory *mem, struct machine *machine,
        int cpu_id, char *cpu_type_name);
void cpu_destroy(struct cpu *cpu);

void cpu_tlbdump(struct machine *m, int x, int rawflag);
void cpu_register_dump(struct machine *m, struct cpu *cpu,
        int gprs, int coprocs);
int cpu_disassemble_instr(struct machine *m, struct cpu *cpu,
        unsigned char *instr, int running, uint64_t addr);
char *cpu_gdb_stub(struct cpu *cpu, char *cmd);

void cpu_functioncall_trace(struct cpu *cpu, uint64_t f);
void cpu_functioncall_trace_return(struct cpu *cpu);

void cpu_create_or_reset_tc(struct cpu *cpu);

void cpu_run_init(struct machine *machine);
void cpu_run_deinit(struct machine *machine);

void cpu_dumpinfo(struct machine *m, struct cpu *cpu);
void cpu_list_available_types(void);
void cpu_show_cycles(struct machine *machine, int forced);

struct cpu_family *cpu_family_ptr_by_number(int arch);
void cpu_init(void);


#define JUST_MARK_AS_NON_WRITABLE       1
#define INVALIDATE_ALL                  2
#define INVALIDATE_PADDR                4
#define INVALIDATE_VADDR                8
#define INVALIDATE_VADDR_UPPER4         16      /*  useful for PPC emulation  */


/*  Note: 64-bit processors running in 32-bit mode use a 32-bit
    display format, even though the underlying data is 64-bits.  */
#define CPU_SETTINGS_ADD_REGISTER64(name, var)                             \
        settings_add(cpu->settings, name, 1, SETTINGS_TYPE_UINT64,         \
            cpu->is_32bit? SETTINGS_FORMAT_HEX32 : SETTINGS_FORMAT_HEX64,  \
            (void *) &(var));
#define CPU_SETTINGS_ADD_REGISTER32(name, var)                             \
        settings_add(cpu->settings, name, 1, SETTINGS_TYPE_UINT32,         \
            SETTINGS_FORMAT_HEX32, (void *) &(var));
#define CPU_SETTINGS_ADD_REGISTER16(name, var)                             \
        settings_add(cpu->settings, name, 1, SETTINGS_TYPE_UINT16,         \
            SETTINGS_FORMAT_HEX16, (void *) &(var));
#define CPU_SETTINGS_ADD_REGISTER8(name, var)                              \
        settings_add(cpu->settings, name, 1, SETTINGS_TYPE_UINT8,          \
            SETTINGS_FORMAT_HEX8, (void *) &(var));


#define CPU_FAMILY_INIT(n,s)    int n ## _cpu_family_init(              \
        struct cpu_family *fp) {                                        \
        /*  Fill in the cpu_family struct with valid data for this arch.  */ \
        fp->name = s;                                                   \
        fp->cpu_new = n ## _cpu_new;                                    \
        fp->list_available_types = n ## _cpu_list_available_types;      \
        fp->disassemble_instr = n ## _cpu_disassemble_instr;            \
        fp->register_dump = n ## _cpu_register_dump;                    \
        fp->dumpinfo = n ## _cpu_dumpinfo;                              \
        fp->functioncall_trace = n ## _cpu_functioncall_trace;          \
        fp->gdb_stub = n ## _cpu_gdb_stub;                              \
        fp->tlbdump = n ## _cpu_tlbdump;                                \
        fp->init_tables = n ## _cpu_init_tables;                        \
        return 1;                                                       \
        }


#endif  /*  CPU_H  */
1	#ifndef CPU_H
2	#define CPU_H
3
4	/*
5	* Copyright (C) 2005-2007 Anders Gavare. All rights reserved.
6	*
7	* Redistribution and use in source and binary forms, with or without
8	* modification, are permitted provided that the following conditions are met:
9	*
10	* 1. Redistributions of source code must retain the above copyright
11	* notice, this list of conditions and the following disclaimer.
12	* 2. Redistributions in binary form must reproduce the above copyright
13	* notice, this list of conditions and the following disclaimer in the
14	* documentation and/or other materials provided with the distribution.
15	* 3. The name of the author may not be used to endorse or promote products
16	* derived from this software without specific prior written permission.
17	*
18	* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19	* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21	* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26	* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27	* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28	* SUCH DAMAGE.
29	*
30	*
31	* $Id: cpu.h,v 1.109 2007/02/10 14:29:54 debug Exp $
32	*
33	* CPU-related definitions.
34	*/
35
36
37	#include <sys/types.h>
38	#include <inttypes.h>
39	#include <sys/time.h>
40
41	/* This is needed for undefining 'mips', 'ppc' etc. on weird systems: */
42	#include "../../config.h"
43
44	/*
45	* Dyntrans misc declarations, used throughout the dyntrans code.
46	*
47	* Note that there is place for all instruction calls within a page,
48	* and then 2 more. The first one of these "extra" instruction slots is
49	* the end-of-page slot. It transfers control to the first instruction
50	* slot on the next (virtual) page.
51	*
52	* The second of these extra instruction slots is an additional
53	* end-of-page slot for delay-slot architectures. On e.g. MIPS, a branch
54	* instruction can "nullify" (skip) the delay-slot. If the end-of-page
55	* slot is skipped, then we end up one step after that. That's where the
56	* end_of_page2 slot is. :)
57	*
58	* next_ofs points to the next page in a chain of possible pages.
59	* (several pages can be in the same chain, but only one matches the
60	* specific physaddr.)
61	*
62	* translations is a tiny bitmap indicating which parts of the page have
63	* actual translations. Bit 0 corresponds to the lowest 1/32th of the page,
64	* bit 1 to the second-lowest 1/32th, and so on.
65	*/
66	#define DYNTRANS_MISC_DECLARATIONS(arch,ARCH,addrtype) struct \
67	arch ## _instr_call { \
68	void (f)(struct cpu , struct arch ## _instr_call *); \
69	size_t arg[ARCH ## _N_IC_ARGS]; \
70	}; \
71	\
72	/* Translation cache struct for each physical page: */ \
73	struct arch ## _tc_physpage { \
74	struct arch ## _instr_call ics[ARCH ## _IC_ENTRIES_PER_PAGE+2];\
75	uint32_t next_ofs; /* (0 for end of chain) */ \
76	uint32_t translations; \
77	addrtype physaddr; \
78	}; \
79	\
80	struct arch ## _vpg_tlb_entry { \
81	uint8_t valid; \
82	uint8_t writeflag; \
83	addrtype vaddr_page; \
84	addrtype paddr_page; \
85	unsigned char *host_page; \
86	};
87
88	#define DYNTRANS_MISC64_DECLARATIONS(arch,ARCH,tlbindextype) \
89	struct arch ## _l3_64_table { \
90	unsigned char *host_load[1 << ARCH ## _L3N]; \
91	unsigned char *host_store[1 << ARCH ## _L3N]; \
92	uint64_t phys_addr[1 << ARCH ## _L3N]; \
93	tlbindextype vaddr_to_tlbindex[1 << ARCH ## _L3N]; \
94	struct arch ## _tc_physpage *phys_page[1 << ARCH ## _L3N]; \
95	struct arch ## _l3_64_table *next; \
96	int refcount; \
97	}; \
98	struct arch ## _l2_64_table { \
99	struct arch ## _l3_64_table *l3[1 << ARCH ## _L2N]; \
100	struct arch ## _l2_64_table *next; \
101	int refcount; \
102	};
103
104	/*
105	* Dyntrans "Instruction Translation Cache":
106	*
107	* cur_physpage is a pointer to the current physpage. (It _HAPPENS_ to
108	* be the same as cur_ic_page, because all the instrcalls should be placed
109	* first in the physpage struct!)
110	*
111	* cur_ic_page is a pointer to an array of xxx_IC_ENTRIES_PER_PAGE
112	* instruction call entries.
113	*
114	* next_ic points to the next such instruction call to be executed.
115	*
116	* combination_check, when set to non-NULL, is executed automatically after
117	* an instruction has been translated. (It check for combinations of
118	* instructions; low_addr is the offset of the translated instruction in the
119	* current page, NOT shifted right.)
120	*/
121	#define DYNTRANS_ITC(arch) struct arch ## _tc_physpage *cur_physpage; \
122	struct arch ## _instr_call *cur_ic_page; \
123	struct arch ## _instr_call *next_ic; \
124	struct arch ## _tc_physpage *physpage_template;\
125	void (combination_check)(struct cpu , \
126	struct arch ## _instr_call *, int low_addr);
127
128	/*
129	* Virtual -> physical -> host address translation TLB entries:
130	* ------------------------------------------------------------
131	*
132	* Regardless of whether 32-bit or 64-bit address translation is used, the
133	* same TLB entry structure is used.
134	*/
135	#define VPH_TLBS(arch,ARCH) \
136	struct arch ## _vpg_tlb_entry \
137	vph_tlb_entry[ARCH ## _MAX_VPH_TLB_ENTRIES];
138
139	/*
140	* 32-bit dyntrans emulated Virtual -> physical -> host address translation:
141	* -------------------------------------------------------------------------
142	*
143	* This stuff assumes that 4 KB pages are used. 20 bits to select a page
144	* means just 1 M entries needed. This is small enough that a couple of
145	* full-size tables can fit in virtual memory on modern hosts (both 32-bit
146	* and 64-bit hosts). :-)
147	*
148	* Usage: e.g. VPH32(arm,ARM,uint32_t,uint8_t)
149	* or VPH32(sparc,SPARC,uint64_t,uint16_t)
150	*
151	* The vph_tlb_entry entries are cpu dependent tlb entries.
152	*
153	* The host_load and host_store entries point to host pages; the phys_addr
154	* entries are uint32_t or uint64_t (emulated physical addresses).
155	*
156	* phys_page points to translation cache physpages.
157	*
158	* vaddr_to_tlbindex is a virtual address to tlb index hint table.
159	* The values in this array are the tlb index plus 1, so a value of, say,
160	* 3 means tlb index 2. A value of 0 would mean a tlb index of -1, which
161	* is not a valid index. (I.e. no hit.)
162	*/
163	#define N_VPH32_ENTRIES 1048576
164	#define VPH32(arch,ARCH,paddrtype,tlbindextype) \
165	unsigned char *host_load[N_VPH32_ENTRIES]; \
166	unsigned char *host_store[N_VPH32_ENTRIES]; \
167	paddrtype phys_addr[N_VPH32_ENTRIES]; \
168	struct arch ## _tc_physpage *phys_page[N_VPH32_ENTRIES]; \
169	tlbindextype vaddr_to_tlbindex[N_VPH32_ENTRIES];
170
171	/*
172	* 64-bit dyntrans emulated Virtual -> physical -> host address translation:
173	* -------------------------------------------------------------------------
174	*
175	* Usage: e.g. VPH64(alpha,ALPHA,uint8_t)
176	* or VPH64(sparc,SPARC,uint16_t)
177	*
178	* l1_64 is an array containing poiners to l2 tables.
179	*
180	* l2_64_dummy is a pointer to a "dummy l2 table". Instead of having NULL
181	* pointers in l1_64 for unused slots, a pointer to the dummy table can be
182	* used.
183	*/
184	#define DYNTRANS_L1N 17
185	#define VPH64(arch,ARCH,tlbindextype) \
186	struct arch ## _l3_64_table *l3_64_dummy; \
187	struct arch ## _l3_64_table *next_free_l3; \
188	struct arch ## _l2_64_table *l2_64_dummy; \
189	struct arch ## _l2_64_table *next_free_l2; \
190	struct arch ## _l2_64_table *l1_64[1 << DYNTRANS_L1N];
191
192
193	/* Include all CPUs' header files here: */
194	#include "cpu_alpha.h"
195	#include "cpu_arm.h"
196	#include "cpu_avr.h"
197	#include "cpu_m68k.h"
198	#include "cpu_mips.h"
199	#include "cpu_ppc.h"
200	#include "cpu_rca180x.h"
201	#include "cpu_sh.h"
202	#include "cpu_sparc.h"
203	#include "cpu_transputer.h"
204
205	struct cpu;
206	struct emul;
207	struct machine;
208	struct memory;
209	struct settings;
210
211
212	/*
213	* cpu_family
214	* ----------
215	*
216	* This structure consists of various pointers to functions, performing
217	* architecture-specific functions.
218	*
219	* Except for the next and arch fields at the top, all fields in the
220	* cpu_family struct are filled in by ecah CPU family's init function.
221	*/
222	struct cpu_family {
223	struct cpu_family *next;
224	int arch;
225
226	/* Familty name, e.g. "MIPS", "Alpha" etc. */
227	char *name;
228
229	/* Fill in architecture specific parts of a struct cpu. */
230	int (cpu_new)(struct cpu cpu, struct memory *mem,
231	struct machine *machine,
232	int cpu_id, char *cpu_type_name);
233
234	/* Initialize various translation tables. */
235	void (init_tables)(struct cpu cpu);
236
237	/* List available CPU types for this architecture. */
238	void (*list_available_types)(void);
239
240	/* Disassemble an instruction. */
241	int (disassemble_instr)(struct cpu cpu,
242	unsigned char *instr, int running,
243	uint64_t dumpaddr);
244
245	/* Dump CPU registers in readable format. */
246	void (register_dump)(struct cpu cpu,
247	int gprs, int coprocs);
248
249	/* Dump generic CPU info in readable format. */
250	void (dumpinfo)(struct cpu cpu);
251
252	/* Dump TLB data for CPU id x. */
253	void (tlbdump)(struct machine m, int x,
254	int rawflag);
255
256	/* Print architecture-specific function call arguments.
257	(This is called for each function call, if running with -t.) */
258	void (functioncall_trace)(struct cpu ,
259	uint64_t f, int n_args);
260
261	/* GDB command handler. */
262	char (gdb_stub)(struct cpu , char cmd);
263	};
264
265
266	/*
267	* More dyntrans stuff:
268	*
269	* The translation cache begins with N_BASE_TABLE_ENTRIES uint32_t offsets
270	* into the cache, for possible translation cache structs for physical pages.
271	*/
272
273	/* Meaning of delay_slot: */
274	#define NOT_DELAYED 0
275	#define DELAYED 1
276	#define TO_BE_DELAYED 2
277	#define EXCEPTION_IN_DELAY_SLOT 8
278
279	#define N_SAFE_DYNTRANS_LIMIT_SHIFT 14
280	#define N_SAFE_DYNTRANS_LIMIT ((1 << (N_SAFE_DYNTRANS_LIMIT_SHIFT - 1)) - 1)
281
282	#define DEFAULT_DYNTRANS_CACHE_SIZE (40*1048576)
283	#define DYNTRANS_CACHE_MARGIN 200000
284
285	#define N_BASE_TABLE_ENTRIES 32768
286	#define PAGENR_TO_TABLE_INDEX(a) ((a) & (N_BASE_TABLE_ENTRIES-1))
287
288
289	/*
290	* The generic CPU struct:
291	*/
292
293	struct cpu {
294	/* Pointer back to the machine this CPU is in: */
295	struct machine *machine;
296
297	/* Settings: */
298	struct settings *settings;
299
300	/* CPU-specific name, e.g. "R2000", "21164PC", etc. */
301	char *name;
302
303	/* Full "path" to the CPU, e.g. "emul[0].machine[0].cpu[0]": */
304	char *path;
305
306	/* EMUL_LITTLE_ENDIAN or EMUL_BIG_ENDIAN. */
307	int byte_order;
308
309	/* 0-based CPU id, in an emulated SMP system. */
310	int cpu_id;
311
312	/* 0 for emulated 64-bit CPUs, 1 for 32-bit. */
313	int is_32bit;
314
315	/* 1 while running, 0 when paused/stopped. */
316	int running;
317
318	/* A pointer to the main memory connected to this CPU. */
319	struct memory *mem;
320
321	int (run_instr)(struct cpu cpu);
322	int (memory_rw)(struct cpu cpu,
323	struct memory *mem, uint64_t vaddr,
324	unsigned char *data, size_t len,
325	int writeflag, int cache_flags);
326	int (translate_v2p)(struct cpu , uint64_t vaddr,
327	uint64_t *return_paddr, int flags);
328	void (update_translation_table)(struct cpu ,
329	uint64_t vaddr_page, unsigned char *host_page,
330	int writeflag, uint64_t paddr_page);
331	void (invalidate_translation_caches)(struct cpu ,
332	uint64_t paddr, int flags);
333	void (invalidate_code_translation)(struct cpu ,
334	uint64_t paddr, int flags);
335	void (useremul_syscall)(struct cpu cpu, uint32_t code);
336	int (instruction_has_delayslot)(struct cpu cpu,
337	unsigned char *ib);
338
339	/* The program counter. (For 32-bit modes, not all bits are used.) */
340	uint64_t pc;
341
342	/* See comment further up. */
343	int delay_slot;
344
345	/* The current depth of function call tracing. */
346	int trace_tree_depth;
347
348	/*
349	* If is_halted is true when an interrupt trap occurs, the pointer
350	* to the next instruction to execute will be the instruction
351	* following the halt instruction, not the halt instrucion itself.
352	*
353	* If has_been_idling is true when printing the number of executed
354	* instructions per second, "idling" is printed instead. (The number
355	* of instrs per second when idling is meaningless anyway.)
356	*/
357	int is_halted;
358	int has_been_idling;
359
360	/*
361	* Dynamic translation:
362	*
363	* The number of translated instructions is assumed to be 1 per
364	* instruction call. For each case where this differs from the
365	* truth, n_translated_instrs should be modified. E.g. if 1000
366	* instruction calls are done, and n_translated_instrs is 50, then
367	* 1050 emulated instructions were actually executed.
368	*
369	* Note that it can also be adjusted negatively, that is, the way
370	* to "get out" of a dyntrans loop is to set the current instruction
371	* call pointer to the "nothing" instruction. This instruction
372	* _decreases_ n_translated_instrs. That way, once the dyntrans loop
373	* exits, only real instructions will be counted, and not the
374	* "nothing" instructions.
375	*
376	* The translation cache is a relative large chunk of memory (say,
377	* 32 MB) which is used for translations. When it has been used up,
378	* everything restarts from scratch.
379	*
380	* When translating to native code, currently_translating_to_native
381	* is non-zero, and native_code_function_pointer points to the
382	* "ic->f" which will be modified (once the translation has finished)
383	* to point to the newly translated code.
384	*/
385	int n_translated_instrs;
386	unsigned char *translation_cache;
387	size_t translation_cache_cur_ofs;
388	int currently_translating_to_native;
389	int nr_of_instructions_translated_to_native;
390	unsigned char *native_cur_output_ptr;
391	void **native_code_function_pointer;
392
393	/*
394	* CPU-family dependent:
395	*
396	* These contain everything ranging from registers, memory management,
397	* status words, etc.
398	*/
399	union {
400	struct alpha_cpu alpha;
401	struct arm_cpu arm;
402	struct avr_cpu avr;
403	struct m68k_cpu m68k;
404	struct mips_cpu mips;
405	struct ppc_cpu ppc;
406	struct rca180x_cpu rca180x;
407	struct sh_cpu sh;
408	struct sparc_cpu sparc;
409	struct transputer_cpu transputer;
410	} cd;
411	};
412
413
414	/* cpu.c: */
415	struct cpu cpu_new(struct memory mem, struct machine *machine,
416	int cpu_id, char *cpu_type_name);
417	void cpu_destroy(struct cpu *cpu);
418
419	void cpu_tlbdump(struct machine *m, int x, int rawflag);
420	void cpu_register_dump(struct machine m, struct cpu cpu,
421	int gprs, int coprocs);
422	int cpu_disassemble_instr(struct machine m, struct cpu cpu,
423	unsigned char *instr, int running, uint64_t addr);
424	char cpu_gdb_stub(struct cpu cpu, char *cmd);
425
426	void cpu_functioncall_trace(struct cpu *cpu, uint64_t f);
427	void cpu_functioncall_trace_return(struct cpu *cpu);
428
429	void cpu_create_or_reset_tc(struct cpu *cpu);
430
431	void cpu_run_init(struct machine *machine);
432	void cpu_run_deinit(struct machine *machine);
433
434	void cpu_dumpinfo(struct machine m, struct cpu cpu);
435	void cpu_list_available_types(void);
436	void cpu_show_cycles(struct machine *machine, int forced);
437
438	struct cpu_family *cpu_family_ptr_by_number(int arch);
439	void cpu_init(void);
440
441
442	#define JUST_MARK_AS_NON_WRITABLE 1
443	#define INVALIDATE_ALL 2
444	#define INVALIDATE_PADDR 4
445	#define INVALIDATE_VADDR 8
446	#define INVALIDATE_VADDR_UPPER4 16 /* useful for PPC emulation */
447
448
449	/* Note: 64-bit processors running in 32-bit mode use a 32-bit
450	display format, even though the underlying data is 64-bits. */
451	#define CPU_SETTINGS_ADD_REGISTER64(name, var) \
452	settings_add(cpu->settings, name, 1, SETTINGS_TYPE_UINT64, \
453	cpu->is_32bit? SETTINGS_FORMAT_HEX32 : SETTINGS_FORMAT_HEX64, \
454	(void *) &(var));
455	#define CPU_SETTINGS_ADD_REGISTER32(name, var) \
456	settings_add(cpu->settings, name, 1, SETTINGS_TYPE_UINT32, \
457	SETTINGS_FORMAT_HEX32, (void *) &(var));
458	#define CPU_SETTINGS_ADD_REGISTER16(name, var) \
459	settings_add(cpu->settings, name, 1, SETTINGS_TYPE_UINT16, \
460	SETTINGS_FORMAT_HEX16, (void *) &(var));
461	#define CPU_SETTINGS_ADD_REGISTER8(name, var) \
462	settings_add(cpu->settings, name, 1, SETTINGS_TYPE_UINT8, \
463	SETTINGS_FORMAT_HEX8, (void *) &(var));
464
465
466	#define CPU_FAMILY_INIT(n,s) int n ## _cpu_family_init( \
467	struct cpu_family *fp) { \
468	/* Fill in the cpu_family struct with valid data for this arch. */ \
469	fp->name = s; \
470	fp->cpu_new = n ## _cpu_new; \
471	fp->list_available_types = n ## _cpu_list_available_types; \
472	fp->disassemble_instr = n ## _cpu_disassemble_instr; \
473	fp->register_dump = n ## _cpu_register_dump; \
474	fp->dumpinfo = n ## _cpu_dumpinfo; \
475	fp->functioncall_trace = n ## _cpu_functioncall_trace; \
476	fp->gdb_stub = n ## _cpu_gdb_stub; \
477	fp->tlbdump = n ## _cpu_tlbdump; \
478	fp->init_tables = n ## _cpu_init_tables; \
479	return 1; \
480	}
481
482
483	#endif /* CPU_H */