/[gxemul]/trunk/src/include/comreg.h
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Contents of /trunk/src/include/comreg.h

Parent Directory Parent Directory | Revision Log Revision Log


Revision 4 - (show annotations)
Mon Oct 8 16:18:00 2007 UTC (16 years, 5 months ago) by dpavlin
File MIME type: text/plain
File size: 6098 byte(s)
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.707 2005/04/27 16:37:33 debug Exp $
20050408	Some minor updates to the wdc. Linux now doesn't complain
		anymore if a disk is non-present.
20050409	Various minor fixes (a bintrans bug, and some other things).
		The wdc seems to work with Playstation2 emulation, but there
		is a _long_ annoying delay when disks are detected.
		Fixing a really important bintrans bug (when devices and RAM
		are mixed within 4KB pages), which was triggered with
		NetBSD/playstation2 kernels.
20050410	Adding a dummy dev_ps2_ether (just so that NetBSD doesn't
		complain as much during bootup).
		Symbols starting with '$' are now ignored.
		Renaming dev_ps2_ohci.c to dev_ohci.c, etc.
20050411	Moving the bintrans-cache-isolation check from cpu_mips.c to
		cpu_mips_coproc.c. (I thought this would give a speedup, but
		it's not noticable.)
		Better playstation2 sbus interrupt code.
		Skip ahead many ticks if the count register is read manually.
		(This increases the speed of delay-loops that simply read
		the count register.)
20050412	Updates to the playstation2 timer/interrupt code.
		Some other minor updates.
20050413	NetBSD/cobalt runs from a disk image :-) including userland;
		updating the documentation on how to install NetBSD/cobalt
		using NetBSD/pmax (!).
		Some minor bintrans updates (no real speed improvement) and
		other minor updates (playstation2 now uses the -o options).
20050414	Adding a dummy x86 (and AMD64) mode.
20050415	Adding some (32-bit and 16-bit) x86 instructions.
		Adding some initial support for non-SCSI, non-IDE floppy
		images. (The x86 mode can boot from these, more or less.)
		Moving the devices/ and include/ directories to src/devices/
		and src/include/, respectively.
20050416	Continuing on the x86 stuff. (Adding pc_bios.c and some simple
		support for software interrupts in 16-bit mode.)
20050417	Ripping out most of the x86 instruction decoding stuff, trying
		to rewrite it in a cleaner way.
		Disabling some of the least working CPU families in the
		configure script (sparc, x86, alpha, hppa), so that they are
		not enabled by default.
20050418	Trying to fix the bug which caused problems when turning on
		and off bintrans interactively, by flushing the bintrans cache
		whenever bintrans is manually (re)enabled.
20050419	Adding the 'lswi' ppc instruction.
		Minor updates to the x86 instruction decoding.
20050420	Renaming x86 register name indices from R_xx to X86_R_xx (this
		makes building on Tru64 nicer).
20050422	Adding a check for duplicate MIPS TLB entries on tlbwr/tlbwi.
20050427	Adding screenshots to guestoses.html.
		Some minor fixes and testing for the next release.

==============  RELEASE 0.3.2  ==============


1 /* gxemul: $Id: comreg.h,v 1.3 2005/03/05 12:34:02 debug Exp $ */
2 #ifndef COMREG_H
3 #define COMREG_H
4
5 /* $NetBSD: comreg.h,v 1.11 1997/10/19 14:26:21 fvdl Exp $ */
6
7 /*-
8 * Copyright (c) 1991 The Regents of the University of California.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
16 * 2. Redistributions in binary form must reproduce the above copyright
17 * notice, this list of conditions and the following disclaimer in the
18 * documentation and/or other materials provided with the distribution.
19 * 3. All advertising materials mentioning features or use of this software
20 * must display the following acknowledgement:
21 * This product includes software developed by the University of
22 * California, Berkeley and its contributors.
23 * 4. Neither the name of the University nor the names of its contributors
24 * may be used to endorse or promote products derived from this software
25 * without specific prior written permission.
26 *
27 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
28 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
29 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
30 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
31 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
35 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
36 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
37 * SUCH DAMAGE.
38 *
39 * @(#)comreg.h 7.2 (Berkeley) 5/9/91
40 */
41
42 #include "ns16550reg.h"
43
44 #define COM_FREQ 1843200 /* 16-bit baud rate divisor */
45 #define COM_TOLERANCE 30 /* baud rate tolerance, in 0.1% units */
46
47 /* interrupt enable register */
48 #define IER_ERXRDY 0x1 /* Enable receiver interrupt */
49 #define IER_ETXRDY 0x2 /* Enable transmitter empty interrupt */
50 #define IER_ERLS 0x4 /* Enable line status interrupt */
51 #define IER_EMSC 0x8 /* Enable modem status interrupt */
52 #define IER_ERTS 0x40 /* Enable RTS interrupt */
53 #define IER_ECTS 0x80 /* Enable CTS interrupt */
54
55 /* interrupt identification register */
56 #define IIR_IMASK 0xf
57 #define IIR_RXTOUT 0xc
58 #define IIR_RLS 0x6 /* Line status change */
59 #define IIR_RXRDY 0x4 /* Receiver ready */
60 #define IIR_TXRDY 0x2 /* Transmitter ready */
61 #define IIR_MLSC 0x0 /* Modem status */
62 #define IIR_NOPEND 0x1 /* No pending interrupts */
63 #define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */
64
65 /* fifo control register */
66 #define FIFO_ENABLE 0x01 /* Turn the FIFO on */
67 #define FIFO_RCV_RST 0x02 /* Reset RX FIFO */
68 #define FIFO_XMT_RST 0x04 /* Reset TX FIFO */
69 #define FIFO_DMA_MODE 0x08
70 #define FIFO_TRIGGER_1 0x00 /* Trigger RXRDY intr on 1 character */
71 #define FIFO_TRIGGER_4 0x40 /* ibid 4 */
72 #define FIFO_TRIGGER_8 0x80 /* ibid 8 */
73 #define FIFO_TRIGGER_14 0xc0 /* ibid 14 */
74
75 /* enhanced feature register */
76 #define EFR_AUTOCTS 0x80 /* Automatic CTS flow control */
77 #define EFR_AUTORTS 0x40 /* Automatic RTS flow control */
78 #define EFR_SPECIAL 0x20 /* Special char detect */
79 #define EFR_EFCR 0x10 /* Enhanced function control bit */
80 #define EFR_TXFLOWBOTH 0x0c /* Automatic transmit XON/XOFF 1 and 2 */
81 #define EFR_TXFLOW1 0x08 /* Automatic transmit XON/XOFF 1 */
82 #define EFR_TXFLOW2 0x04 /* Automatic transmit XON/XOFF 2 */
83 #define EFR_TXFLOWNONE 0x00 /* No automatic XON/XOFF transmit */
84 #define EFR_RXFLOWBOTH 0x03 /* Automatic receive XON/XOFF 1 and 2 */
85 #define EFR_RXFLOW1 0x02 /* Automatic receive XON/XOFF 1 */
86 #define EFR_RXFLOW2 0x01 /* Automatic receive XON/XOFF 2 */
87 #define EFR_RXFLOWNONE 0x00 /* No automatic XON/XOFF receive */
88
89 /* line control register */
90 #define LCR_EERS 0xBF /* Enable access to Enhanced Register Set */
91 #define LCR_DLAB 0x80 /* Divisor latch access enable */
92 #define LCR_SBREAK 0x40 /* Break Control */
93 #define LCR_PZERO 0x38 /* Space parity */
94 #define LCR_PONE 0x28 /* Mark parity */
95 #define LCR_PEVEN 0x18 /* Even parity */
96 #define LCR_PODD 0x08 /* Odd parity */
97 #define LCR_PNONE 0x00 /* No parity */
98 #define LCR_PENAB 0x08 /* XXX - low order bit of all parity */
99 #define LCR_STOPB 0x04 /* 2 stop bits per serial word */
100 #define LCR_8BITS 0x03 /* 8 bits per serial word */
101 #define LCR_7BITS 0x02 /* 7 bits */
102 #define LCR_6BITS 0x01 /* 6 bits */
103 #define LCR_5BITS 0x00 /* 5 bits */
104
105 /* modem control register */
106 #define MCR_LOOPBACK 0x10 /* Loop test: echos from TX to RX */
107 #define MCR_IENABLE 0x08 /* Out2: enables UART interrupts */
108 #define MCR_DRS 0x04 /* Out1: resets some internal modems */
109 #define MCR_RTS 0x02 /* Request To Send */
110 #define MCR_DTR 0x01 /* Data Terminal Ready */
111
112 /* line status register */
113 #define LSR_RCV_FIFO 0x80
114 #define LSR_TSRE 0x40 /* Transmitter empty: byte sent */
115 #define LSR_TXRDY 0x20 /* Transmitter buffer empty */
116 #define LSR_BI 0x10 /* Break detected */
117 #define LSR_FE 0x08 /* Framing error: bad stop bit */
118 #define LSR_PE 0x04 /* Parity error */
119 #define LSR_OE 0x02 /* Overrun, lost incoming byte */
120 #define LSR_RXRDY 0x01 /* Byte ready in Receive Buffer */
121 #define LSR_RCV_MASK 0x1f /* Mask for incoming data or error */
122
123 /* modem status register */
124 /* All deltas are from the last read of the MSR. */
125 #define MSR_DCD 0x80 /* Current Data Carrier Detect */
126 #define MSR_RI 0x40 /* Current Ring Indicator */
127 #define MSR_DSR 0x20 /* Current Data Set Ready */
128 #define MSR_CTS 0x10 /* Current Clear to Send */
129 #define MSR_DDCD 0x08 /* DCD has changed state */
130 #define MSR_TERI 0x04 /* RI has toggled low to high */
131 #define MSR_DDSR 0x02 /* DSR has changed state */
132 #define MSR_DCTS 0x01 /* CTS has changed state */
133
134 /* XXX ISA-specific. */
135 #define COM_NPORTS 8
136
137 #endif /* COMREG_H */

  ViewVC Help
Powered by ViewVC 1.1.26