/[gxemul]/trunk/src/include/arcbios.h
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Contents of /trunk/src/include/arcbios.h

Parent Directory Parent Directory | Revision Log Revision Log

Revision 28 - (show annotations)
Mon Oct 8 16:20:26 2007 UTC (16 years, 6 months ago) by dpavlin
File MIME type: text/plain
File size: 4181 byte(s) 
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1298 2006/07/22 11:27:46 debug Exp $
20060626	Continuing on SPARC emulation (beginning on the 'save'
		instruction, register windows, etc).
20060629	Planning statistics gathering (new -s command line option),
		and renaming speed_tricks to allow_instruction_combinations.
20060630	Some minor manual page updates.
		Various cleanups.
		Implementing the -s command line option.
20060701	FINALLY found the bug which prevented Linux and Ultrix from
		running without the ugly hack in the R2000/R3000 cache isol
		code; it was the phystranslation hint array which was buggy.
		Removing the phystranslation hint code completely, for now.
20060702	Minor dyntrans cleanups; invalidation of physpages now only
		invalidate those parts of a page that have actually been
		translated. (32 parts per page.)
		Some MIPS non-R3000 speed fixes.
		Experimenting with MIPS instruction combination for some
		addiu+bne+sw loops, and sw+sw+sw.
		Adding support (again) for larger-than-4KB pages in MIPS tlbw*.
		Continuing on SPARC emulation: adding load/store instructions.
20060704	Fixing a virtual vs physical page shift bug in the new tlbw*
		implementation. Problem noticed by Jakub Jermar. (Many thanks.)
		Moving rfe and eret to cpu_mips_instr.c, since that is the
		only place that uses them nowadays.
20060705	Removing the BSD license from the "testmachine" include files,
		placing them in the public domain instead; this enables the
		testmachine stuff to be used from projects which are
		incompatible with the BSD license for some reason.
20060707	Adding instruction combinations for the R2000/R3000 L1
		I-cache invalidation code used by NetBSD/pmax 3.0, lui+addiu,
		various branches followed by addiu or nop, and jr ra followed
		by addiu. The time it takes to perform a full NetBSD/pmax R3000
		install on the laptop has dropped from 573 seconds to 539. :-)
20060708	Adding a framebuffer controller device (dev_fbctrl), which so
		far can be used to change the fb resolution during runtime, but
		in the future will also be useful for accelerated block fill/
		copy, and possibly also simplified character output.
		Adding an instruction combination for NetBSD/pmax' strlen.
20060709	Minor fixes: reading raw files in src/file.c wasn't memblock
		aligned, removing buggy multi_sw MIPS instruction combination,
		etc.
20060711	Adding a machine_qemu.c, which contains a "qemu_mips" machine.
		(It mimics QEMU's MIPS machine mode, so that a test kernel
		made for QEMU_MIPS also can run in GXemul... at least to some
		extent.)  Adding a short section about how to run this mode to
		doc/guestoses.html.
20060714	Misc. minor code cleanups.
20060715	Applying a patch which adds getchar() to promemul/yamon.c
		(from Oleksandr Tymoshenko).
		Adding yamon.h from NetBSD, and rewriting yamon.c to use it
		(instead of ugly hardcoded numbers) + some cleanup.
20060716	Found and fixed the bug which broke single-stepping of 64-bit
		programs between 0.4.0 and 0.4.0.1 (caused by too quick
		refactoring and no testing). Hopefully this fix will not
		break too many other things.
20060718	Continuing on the 8253 PIT; it now works with Linux/QEMU_MIPS.
		Re-adding the sw+sw+sw instr comb (the problem was that I had
		ignored endian issues); however, it doesn't seem to give any
		big performance gain.
20060720	Adding a dummy Transputer mode (T414, T800 etc) skeleton (only
		the 'j' and 'ldc' instructions are implemented so far). :-}
20060721	Adding gtreg.h from NetBSD, updating dev_gt.c to use it, plus
		misc. other updates to get Linux 2.6 for evbmips/malta working
		(thanks to Alec Voropay for the details).
		FINALLY found and fixed the bug which made tlbw* for non-R3000
		buggy; it was a reference count problem in the dyntrans core.
20060722	Testing stuff; things seem stable enough for a new release.

==============  RELEASE 0.4.1  ==============
1 #ifndef ARCBIOS_H
2 #define ARCBIOS_H
3
4 /*
5 * Copyright (C) 2004-2006 Anders Gavare. All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions are met:
9 *
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. The name of the author may not be used to endorse or promote products
16 * derived from this software without specific prior written permission.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 * SUCH DAMAGE.
29 *
30 *
31 * $Id: arcbios.h,v 1.13 2006/06/30 20:22:54 debug Exp $
32 *
33 * Headerfile for src/arcbios.c.
34 *
35 * (Note: There are also files called arcbios_other.h and sgi_arcbios.h,
36 * which are copied from NetBSD.)
37 */
38
39 #include "misc.h"
40 #include "sgi_arcbios.h"
41
42 struct cpu;
43
44 /* arcbios.c: */
45 void arcbios_add_string_to_component(struct machine *machine,
46 char *string, uint64_t component);
47 void arcbios_register_scsicontroller(struct machine *machine,
48 uint64_t scsicontroller_component);
49 uint64_t arcbios_get_scsicontroller(struct machine *machine);
50 void arcbios_add_memory_descriptor(struct cpu *cpu,
51 uint64_t base, uint64_t len, int arctype);
52 uint64_t arcbios_addchild_manual(struct cpu *cpu,
53 uint64_t class, uint64_t type, uint64_t flags, uint64_t version,
54 uint64_t revision, uint64_t key, uint64_t affinitymask,
55 char *identifier, uint64_t parent, void *config_data,
56 size_t config_len);
57 int arcbios_emul(struct cpu *cpu);
58 void arcbios_set_default_exception_handler(struct cpu *cpu);
59
60 void arcbios_console_init(struct machine *machine,
61 uint64_t vram, uint64_t ctrlregs);
62 void arcbios_init(struct machine *machine, int is64bit, uint64_t sgi_ram_offset,
63 char *primary_ether_string, uint8_t *primary_ether_macaddr);
64
65
66 /* For internal use in arcbios.c: */
67
68 struct emul_arc_child {
69 uint32_t ptr_peer;
70 uint32_t ptr_child;
71 uint32_t ptr_parent;
72 struct arcbios_component component;
73 };
74
75 struct emul_arc_child64 {
76 uint64_t ptr_peer;
77 uint64_t ptr_child;
78 uint64_t ptr_parent;
79 struct arcbios_component64 component;
80 };
81
82 #define ARC_BOOTSTR_BUFLEN 1000
83
84
85 /*
86 * Problem: kernels seem to be loaded at low addresses in RAM, so
87 * storing environment strings and memory descriptors there is a bad
88 * idea. They are stored at 0xbfc..... instead. The ARC SPB must
89 * be at physical address 0x1000 though.
90 */
91
92 #define SGI_SPB_ADDR 0xffffffff80001000ULL
93 /* 0xbfc10000 is firmware callback vector stuff */
94 #define ARC_FIRMWARE_VECTORS 0xffffffffbfc80000ULL
95 #define ARC_FIRMWARE_ENTRIES 0xffffffffbfc88000ULL
96 #define ARC_ARGV_START 0xffffffffbfc90000ULL
97 #define ARC_ENV_STRINGS 0xffffffffbfc98000ULL
98 #define ARC_ENV_POINTERS 0xffffffffbfc9d000ULL
99 #define SGI_SYSID_ADDR 0xffffffffbfca1800ULL
100 #define ARC_DSPSTAT_ADDR 0xffffffffbfca1c00ULL
101 #define ARC_MEMDESC_ADDR 0xffffffffbfca1c80ULL
102 #define ARC_CONFIG_DATA_ADDR 0xffffffffbfca2000ULL
103 #define FIRST_ARC_COMPONENT 0xffffffffbfca8000ULL
104 #define ARC_PRIVATE_VECTORS 0xffffffffbfcb0000ULL
105 #define ARC_PRIVATE_ENTRIES 0xffffffffbfcb8000ULL
106
107
108 #endif /* ARCBIOS_H */
  ViewVC Help
Powered by ViewVC 1.1.26