/[gxemul]/trunk/src/emul_parse.c
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Contents of /trunk/src/emul_parse.c

Parent Directory Parent Directory | Revision Log Revision Log


Revision 20 - (show annotations)
Mon Oct 8 16:19:23 2007 UTC (16 years, 6 months ago) by dpavlin
File MIME type: text/plain
File size: 23028 byte(s)
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1055 2005/11/25 22:48:36 debug Exp $
20051031	Adding disassembly support for more ARM instructions (clz,
		smul* etc), and adding a hack to support "new tiny" pages
		for StrongARM.
20051101	Minor documentation updates (NetBSD 2.0.2 -> 2.1, and OpenBSD
		3.7 -> 3.8, and lots of testing).
		Changing from 1-sector PIO mode 0 transfers to 128-sector PIO
		mode 3 (in dev_wdc).
		Various minor ARM dyntrans updates (pc-relative loads from
		within the same page as the instruction are now treated as
		constant "mov").
20051102	Re-enabling instruction combinations (they were accidentally
		disabled).
		Dyntrans TLB entries are now overwritten using a round-robin
		scheme instead of randomly. This increases performance.
		Fixing a typo in file.c (thanks to Chuan-Hua Chang for
		noticing it).
		Experimenting with adding ATAPI support to dev_wdc (to make
		emulated *BSD detect cdroms as cdroms, not harddisks).
20051104	Various minor updates.
20051105	Continuing on the ATAPI emulation. Seems to work well enough
		for a NetBSD/cats installation, but not OpenBSD/cats.
		Various other updates.
20051106	Modifying the -Y command line option to allow scaleup with
		certain graphic controllers (only dev_vga so far), not just
		scaledown.
		Some minor dyntrans cleanups.
20051107	Beginning a cleanup up the PCI subsystem (removing the
		read_register hack, etc).
20051108	Continuing the cleanup; splitting up some pci devices into a
		normal autodev device and some separate pci glue code.
20051109	Continuing on the PCI bus stuff; all old pci_*.c have been
		incorporated into normal devices and/or rewritten as glue code
		only, adding a dummy Intel 82371AB PIIX4 for Malta (not really
		tested yet).
		Minor pckbc fix so that Linux doesn't complain.
		Working on the DEC 21143 NIC (ethernet mac rom stuff mostly).
		Various other minor fixes.
20051110	Some more ARM dyntrans fine-tuning (e.g. some instruction
		combinations (cmps followed by conditional branch within the
		same page) and special cases for DPIs with regform when the
		shifter isn't used).
20051111	ARM dyntrans updates: O(n)->O(1) for just-mark-as-non-
		writable in the generic pc_to_pointers function, and some other
		minor hacks.
		Merging Cobalt and evbmips (Malta) ISA interrupt handling,
		and some minor fixes to allow Linux to accept harddisk irqs.
20051112	Minor device updates (pckbc, dec21143, lpt, ...), most
		importantly fixing the ALI M1543/M5229 so that harddisk irqs
		work with Linux/CATS.
20051113	Some more generalizations of the PCI subsystem.
		Finally took the time to add a hack for SCSI CDROM TOCs; this
		enables OpenBSD to use partition 'a' (as needed by the OpenBSD
		installer), and Windows NT's installer to get a bit further.
		Also fixing dev_wdc to allow Linux to detect ATAPI CDROMs.
		Continuing on the DEC 21143.
20051114	Minor ARM dyntrans tweaks; ARM cmps+branch optimization when
		comparing with 0, and generalizing the xchg instr. comb.
		Adding disassembly of ARM mrrc/mcrr and q{,d}{add,sub}.
20051115	Continuing on various PPC things (BATs, other address trans-
		lation things, various loads/stores, BeBox emulation, etc.).
		Beginning to work on PPC interrupt/exception support.
20051116	Factoring out some code which initializes legacy ISA devices
		from those machines that use them (bus_isa).
		Continuing on PPC interrupt/exception support.
20051117	Minor Malta fixes: RTC year offset = 80, disabling a speed hack
		which caused NetBSD to detect a too fast cpu, and adding a new
		hack to make Linux detect a faster cpu.
		Continuing on the Artesyn PM/PPC emulation mode.
		Adding an Algor emulation skeleton (P4032 and P5064);
		implementing some of the basics.
		Continuing on PPC emulation in general; usage of unimplemented
		SPRs is now easier to track, continuing on memory/exception
		related issues, etc.
20051118	More work on PPC emulation (tgpr0..3, exception handling,
		memory stuff, syscalls, etc.).
20051119	Changing the ARM dyntrans code to mostly use cpu->pc, and not
		necessarily use arm reg 15. Seems to work.
		Various PPC updates; continuing on the PReP emulation mode.
20051120	Adding a workaround/hack to dev_mc146818 to allow NetBSD/prep
		to detect the clock.
20051121	More cleanup of the PCI bus (memory and I/O bases, etc).
		Continuing on various PPC things (decrementer and timebase,
		WDCs on obio (on PReP) use irq 13, not 14/15).
20051122	Continuing on the CPC700 controller (interrupts etc) for PMPPC,
		and on PPC stuff in general.
		Finally! After some bug fixes to the virtual to physical addr
		translation, NetBSD/{prep,pmppc} 2.1 reach userland and are
		stable enough to be interacted with.
		More PCI updates; reverse-endian device access for PowerPC etc.
20051123	Generalizing the IEEE floating point subsystem (moving it out
		from src/cpus/cpu_mips_coproc.c into a new src/float_emul.c).
		Input via slave xterms was sometimes not really working; fixing
		this for ns16550, and a warning message is now displayed if
		multiple non-xterm consoles are active.
		Adding some PPC floating point support, etc.
		Various interrupt related updates (dev_wdc, _ns16550, _8259,
		and the isa32 common code in machine.c).
		NetBSD/prep can now be installed! :-) (Well, with some manual
		commands necessary before running sysinst.) Updating the
		documentation and various other things to reflect this.
20051124	Various minor documentation updates.
		Continuing the work on the DEC 21143 NIC.
20051125	LOTS of work on the 21143. Both OpenBSD and NetBSD work fine
		with it now, except that OpenBSD sometimes gives a time-out
		warning.
		Minor documentation updates.

==============  RELEASE 0.3.7  ==============


1 /*
2 * Copyright (C) 2005 Anders Gavare. All rights reserved.
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions are met:
6 *
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
12 * 3. The name of the author may not be used to endorse or promote products
13 * derived from this software without specific prior written permission.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 *
27 *
28 * $Id: emul_parse.c,v 1.35 2005/11/06 21:15:55 debug Exp $
29 *
30 * Set up an emulation by parsing a config file.
31 *
32 * TODO: This could be extended to support XML config files as well, but
33 * XML is ugly. It is ugly right now as well. The question is: which
34 * solution is the least ugly?
35 */
36
37 #include <stdio.h>
38 #include <stdlib.h>
39 #include <string.h>
40
41 #include "diskimage.h"
42 #include "emul.h"
43 #include "machine.h"
44 #include "misc.h"
45 #include "net.h"
46
47
48 #define is_word_char(ch) ( \
49 (ch >= 'a' && ch <= 'z') || (ch >= 'A' && ch <= 'Z') || \
50 ch == '_' || ch == '$' || (ch >= '0' && ch <= '9') )
51
52
53 #define EXPECT_WORD 1
54 #define EXPECT_LEFT_PARENTHESIS 2
55 #define EXPECT_RIGHT_PARENTHESIS 4
56
57
58 /*
59 * read_one_word():
60 *
61 * Reads the file f until it has read a complete word. Whitespace is ignored,
62 * and also any exclamation mark ('!') and anything following an exclamation
63 * mark on a line.
64 *
65 * Used internally by emul_parse_config().
66 */
67 static void read_one_word(FILE *f, char *buf, int buflen, int *line,
68 int expect)
69 {
70 int ch;
71 int done = 0;
72 int curlen = 0;
73 int in_word = 0;
74
75 while (!done) {
76 if (curlen >= buflen - 1)
77 break;
78
79 ch = fgetc(f);
80 if (ch == EOF)
81 break;
82
83 if (in_word) {
84 if (is_word_char(ch)) {
85 buf[curlen++] = ch;
86 if (curlen == buflen - 1)
87 done = 1;
88 continue;
89 } else {
90 if (ungetc(ch, f) == EOF) {
91 fatal("ungetc() failed?\n");
92 exit(1);
93 }
94 break;
95 }
96 }
97
98 if (ch == '\n') {
99 (*line) ++;
100 continue;
101 }
102
103 if (ch == '\r')
104 continue;
105
106 if (ch == '!') {
107 /* Skip until newline: */
108 while (ch != '\n' && ch != EOF)
109 ch = fgetc(f);
110 if (ch == '\n')
111 (*line) ++;
112 continue;
113 }
114
115 if (ch == '{') {
116 int depth = 1;
117
118 /* Skip until '}': */
119 while (depth > 0) {
120 ch = fgetc(f);
121 if (ch == '\n')
122 (*line) ++;
123 if (ch == '{')
124 depth ++;
125 if (ch == '}')
126 depth --;
127 if (ch == EOF) {
128 fatal("line %i: unexpected EOF inside"
129 " a nested comment\n", *line);
130 exit(1);
131 }
132 }
133 continue;
134 }
135
136 /* Whitespace? */
137 if (ch <= ' ')
138 continue;
139
140 if (ch == '"' || ch == '\'') {
141 /* This is a quoted word. */
142 int start_ch = ch;
143
144 if (expect & EXPECT_LEFT_PARENTHESIS) {
145 fatal("unexpected character '%c', line %i\n",
146 ch, *line);
147 exit(1);
148 }
149
150 while (curlen < buflen - 1) {
151 ch = fgetc(f);
152 if (ch == '\n') {
153 fatal("line %i: newline inside"
154 " quotes?\n", *line);
155 exit(1);
156 }
157 if (ch == EOF) {
158 fatal("line %i: EOF inside a quoted"
159 " string?\n", *line);
160 exit(1);
161 }
162 if (ch == start_ch)
163 break;
164 buf[curlen++] = ch;
165 }
166 break;
167 }
168
169 if ((expect & EXPECT_WORD) && is_word_char(ch)) {
170 buf[curlen++] = ch;
171 in_word = 1;
172 if (curlen == buflen - 1)
173 done = 1;
174 } else {
175 if ((expect & EXPECT_LEFT_PARENTHESIS) && ch == '(') {
176 buf[curlen++] = ch;
177 break;
178 }
179 if ((expect & EXPECT_RIGHT_PARENTHESIS) && ch == ')') {
180 buf[curlen++] = ch;
181 break;
182 }
183
184 fatal("unexpected character '%c', line %i\n",
185 ch, *line);
186 exit(1);
187 }
188 }
189
190 buf[curlen] = '\0';
191 }
192
193
194 #define PARSESTATE_NONE 0
195 #define PARSESTATE_EMUL 1
196 #define PARSESTATE_NET 2
197 #define PARSESTATE_MACHINE 3
198
199 static char cur_net_ipv4net[50];
200 static char cur_net_ipv4len[50];
201 static char cur_net_local_port[10];
202 #define MAX_N_REMOTE 20
203 #define MAX_REMOTE_LEN 100
204 static char *cur_net_remote[MAX_N_REMOTE];
205 static int cur_net_n_remote;
206
207 static char cur_machine_name[50];
208 static char cur_machine_cpu[50];
209 static char cur_machine_type[50];
210 static char cur_machine_subtype[50];
211 static char cur_machine_bootname[150];
212 static char cur_machine_bootarg[250];
213 static char cur_machine_slowsi[10];
214 static char cur_machine_debugger_on_badaddr[10];
215 static char cur_machine_prom_emulation[10];
216 static char cur_machine_use_x11[10];
217 static char cur_machine_x11_scaledown[10];
218 static char cur_machine_bintrans[10];
219 static char cur_machine_old_bintrans[10];
220 static char cur_machine_bintrans_size[10];
221 static char cur_machine_byte_order[20];
222 static char cur_machine_random_mem[10];
223 static char cur_machine_random_cpu[10];
224 static char cur_machine_force_netboot[10];
225 static char cur_machine_start_paused[10];
226 static char cur_machine_ncpus[10];
227 static char cur_machine_n_gfx_cards[10];
228 static char cur_machine_serial_nr[10];
229 static char cur_machine_emulated_hz[10];
230 static char cur_machine_memory[10];
231 static char cur_machine_max_random_cycles[10];
232 #define MAX_N_LOAD 15
233 #define MAX_LOAD_LEN 2000
234 static char *cur_machine_load[MAX_N_LOAD];
235 static int cur_machine_n_load;
236 #define MAX_N_DISK 10
237 #define MAX_DISK_LEN 2000
238 static char *cur_machine_disk[MAX_N_DISK];
239 static int cur_machine_n_disk;
240 #define MAX_N_DEVICE 20
241 #define MAX_DEVICE_LEN 400
242 static char *cur_machine_device[MAX_N_DISK];
243 static int cur_machine_n_device;
244 #define MAX_N_X11_DISP 5
245 #define MAX_X11_DISP_LEN 1000
246 static char *cur_machine_x11_disp[MAX_N_X11_DISP];
247 static int cur_machine_n_x11_disp;
248
249 #define WORD(w,var) { \
250 if (strcmp(word, w) == 0) { \
251 read_one_word(f, word, maxbuflen, \
252 line, EXPECT_LEFT_PARENTHESIS); \
253 read_one_word(f, var, sizeof(var), \
254 line, EXPECT_WORD); \
255 read_one_word(f, word, maxbuflen, \
256 line, EXPECT_RIGHT_PARENTHESIS); \
257 return; \
258 } \
259 }
260
261
262 /*
263 * parse_on_off():
264 *
265 * Returns 1 for "on", "yes", "enable", or "1".
266 * Returns 0 for "off", "no", "disable", or "0".
267 * Prints a fatal warning and exit()s for other values.
268 */
269 int parse_on_off(char *s)
270 {
271 if (strcasecmp(s, "on") == 0 || strcasecmp(s, "yes") == 0 ||
272 strcasecmp(s, "enable") == 0 || strcasecmp(s, "1") == 0)
273 return 1;
274 if (strcasecmp(s, "off") == 0 || strcasecmp(s, "no") == 0 ||
275 strcasecmp(s, "disable") == 0 || strcasecmp(s, "0") == 0)
276 return 0;
277
278 fatal("parse_on_off(): unknown value '%s'\n", s);
279 exit(1);
280 }
281
282
283 /*
284 * parse__none():
285 *
286 * emul ( [...] )
287 */
288 static void parse__none(struct emul *e, FILE *f, int *in_emul, int *line,
289 int *parsestate, char *word, size_t maxbuflen)
290 {
291 if (strcmp(word, "emul") == 0) {
292 if (*in_emul) {
293 fatal("line %i: only one emul per config "
294 "file is supported!\n", *line);
295 exit(1);
296 }
297 *parsestate = PARSESTATE_EMUL;
298 *in_emul = 1;
299 read_one_word(f, word, maxbuflen,
300 line, EXPECT_LEFT_PARENTHESIS);
301 return;
302 }
303
304 fatal("line %i: expecting 'emul', not '%s'\n", *line, word);
305 exit(1);
306 }
307
308
309 /*
310 * parse__emul():
311 *
312 * name, net, machine
313 */
314 static void parse__emul(struct emul *e, FILE *f, int *in_emul, int *line,
315 int *parsestate, char *word, size_t maxbuflen)
316 {
317 if (word[0] == ')') {
318 *parsestate = PARSESTATE_NONE;
319 return;
320 }
321
322 if (strcmp(word, "name") == 0) {
323 char tmp[200];
324 read_one_word(f, word, maxbuflen,
325 line, EXPECT_LEFT_PARENTHESIS);
326 read_one_word(f, tmp, sizeof(tmp), line, EXPECT_WORD);
327 read_one_word(f, word, maxbuflen,
328 line, EXPECT_RIGHT_PARENTHESIS);
329 if (e->name != NULL) {
330 free(e->name);
331 e->name = NULL;
332 }
333 e->name = strdup(tmp);
334 if (e->name == NULL) {
335 fprintf(stderr, "out of memory in parse__emul()\n");
336 exit(1);
337 }
338 debug("name: \"%s\"\n", e->name);
339 return;
340 }
341
342 if (strcmp(word, "net") == 0) {
343 *parsestate = PARSESTATE_NET;
344 read_one_word(f, word, maxbuflen,
345 line, EXPECT_LEFT_PARENTHESIS);
346
347 /* Default net: */
348 strlcpy(cur_net_ipv4net, "10.0.0.0", sizeof(cur_net_ipv4net));
349 strlcpy(cur_net_ipv4len, "8", sizeof(cur_net_ipv4len));
350 strlcpy(cur_net_local_port, "", sizeof(cur_net_local_port));
351 cur_net_n_remote = 0;
352 return;
353 }
354
355 if (strcmp(word, "machine") == 0) {
356 *parsestate = PARSESTATE_MACHINE;
357 read_one_word(f, word, maxbuflen,
358 line, EXPECT_LEFT_PARENTHESIS);
359
360 /* A "zero state": */
361 cur_machine_name[0] = '\0';
362 cur_machine_cpu[0] = '\0';
363 cur_machine_type[0] = '\0';
364 cur_machine_subtype[0] = '\0';
365 cur_machine_bootname[0] = '\0';
366 cur_machine_bootarg[0] = '\0';
367 cur_machine_n_load = 0;
368 cur_machine_n_disk = 0;
369 cur_machine_n_device = 0;
370 cur_machine_n_x11_disp = 0;
371 cur_machine_slowsi[0] = '\0';
372 cur_machine_debugger_on_badaddr[0] = '\0';
373 cur_machine_prom_emulation[0] = '\0';
374 cur_machine_use_x11[0] = '\0';
375 cur_machine_x11_scaledown[0] = '\0';
376 cur_machine_bintrans[0] = '\0';
377 cur_machine_old_bintrans[0] = '\0';
378 cur_machine_bintrans_size[0] = '\0';
379 cur_machine_byte_order[0] = '\0';
380 cur_machine_random_mem[0] = '\0';
381 cur_machine_random_cpu[0] = '\0';
382 cur_machine_force_netboot[0] = '\0';
383 cur_machine_start_paused[0] = '\0';
384 cur_machine_ncpus[0] = '\0';
385 cur_machine_n_gfx_cards[0] = '\0';
386 cur_machine_serial_nr[0] = '\0';
387 cur_machine_emulated_hz[0] = '\0';
388 cur_machine_memory[0] = '\0';
389 cur_machine_max_random_cycles[0] = '\0';
390 return;
391 }
392
393 fatal("line %i: not expecting '%s' in an 'emul' section\n",
394 *line, word);
395 exit(1);
396 }
397
398
399 /*
400 * parse__net():
401 *
402 * Simple words: ipv4net, ipv4len, local_port
403 *
404 * Complex: add_remote
405 *
406 * TODO: more words? for example an option to disable the gateway? that would
407 * have to be implemented correctly in src/net.c first.
408 */
409 static void parse__net(struct emul *e, FILE *f, int *in_emul, int *line,
410 int *parsestate, char *word, size_t maxbuflen)
411 {
412 int i;
413
414 if (word[0] == ')') {
415 /* Finished with the 'net' section. Let's create the net: */
416 if (e->net != NULL) {
417 fatal("line %i: more than one net isn't really "
418 "supported yet\n", *line);
419 exit(1);
420 }
421
422 if (!cur_net_local_port[0])
423 strlcpy(cur_net_local_port, "0",
424 sizeof(cur_net_local_port));
425
426 e->net = net_init(e, NET_INIT_FLAG_GATEWAY,
427 cur_net_ipv4net, atoi(cur_net_ipv4len),
428 cur_net_remote, cur_net_n_remote,
429 atoi(cur_net_local_port));
430
431 if (e->net == NULL) {
432 fatal("line %i: fatal error: could not create"
433 " the net (?)\n", *line);
434 exit(1);
435 }
436
437 for (i=0; i<cur_net_n_remote; i++) {
438 free(cur_net_remote[i]);
439 cur_net_remote[i] = NULL;
440 }
441
442 *parsestate = PARSESTATE_EMUL;
443 return;
444 }
445
446 WORD("ipv4net", cur_net_ipv4net);
447 WORD("ipv4len", cur_net_ipv4len);
448 WORD("local_port", cur_net_local_port);
449
450 if (strcmp(word, "add_remote") == 0) {
451 read_one_word(f, word, maxbuflen,
452 line, EXPECT_LEFT_PARENTHESIS);
453 if (cur_net_n_remote >= MAX_N_REMOTE) {
454 fprintf(stderr, "too many remote networks\n");
455 exit(1);
456 }
457 cur_net_remote[cur_net_n_remote] = malloc(MAX_REMOTE_LEN);
458 if (cur_net_remote[cur_net_n_remote] == NULL) {
459 fprintf(stderr, "out of memory\n");
460 exit(1);
461 }
462 read_one_word(f, cur_net_remote[cur_net_n_remote],
463 MAX_REMOTE_LEN, line, EXPECT_WORD);
464 cur_net_n_remote ++;
465 read_one_word(f, word, maxbuflen, line,
466 EXPECT_RIGHT_PARENTHESIS);
467 return;
468 }
469
470 fatal("line %i: not expecting '%s' in a 'net' section\n", *line, word);
471 exit(1);
472 }
473
474
475 /*
476 * parse__machine():
477 */
478 static void parse__machine(struct emul *e, FILE *f, int *in_emul, int *line,
479 int *parsestate, char *word, size_t maxbuflen)
480 {
481 int r, i;
482
483 if (word[0] == ')') {
484 /* Finished with the 'machine' section. */
485 struct machine *m;
486
487 if (!cur_machine_name[0])
488 strlcpy(cur_machine_name, "no_name",
489 sizeof(cur_machine_name));
490
491 m = emul_add_machine(e, cur_machine_name);
492
493 r = machine_name_to_type(cur_machine_type, cur_machine_subtype,
494 &m->machine_type, &m->machine_subtype, &m->arch);
495 if (!r)
496 exit(1);
497
498 if (cur_machine_cpu[0])
499 m->cpu_name = strdup(cur_machine_cpu);
500
501 if (!cur_machine_use_x11[0])
502 strlcpy(cur_machine_use_x11, "no",
503 sizeof(cur_machine_use_x11));
504 m->use_x11 = parse_on_off(cur_machine_use_x11);
505
506 if (!cur_machine_slowsi[0])
507 strlcpy(cur_machine_slowsi, "no",
508 sizeof(cur_machine_slowsi));
509 m->slow_serial_interrupts_hack_for_linux =
510 parse_on_off(cur_machine_slowsi);
511
512 if (!cur_machine_debugger_on_badaddr[0])
513 strlcpy(cur_machine_debugger_on_badaddr, "no",
514 sizeof(cur_machine_debugger_on_badaddr));
515 m->single_step_on_bad_addr =
516 parse_on_off(cur_machine_debugger_on_badaddr);
517
518 if (!cur_machine_prom_emulation[0])
519 strlcpy(cur_machine_prom_emulation, "yes",
520 sizeof(cur_machine_prom_emulation));
521 m->prom_emulation = parse_on_off(cur_machine_prom_emulation);
522
523 if (!cur_machine_random_mem[0])
524 strlcpy(cur_machine_random_mem, "no",
525 sizeof(cur_machine_random_mem));
526 m->random_mem_contents =
527 parse_on_off(cur_machine_random_mem);
528
529 if (!cur_machine_random_cpu[0])
530 strlcpy(cur_machine_random_cpu, "no",
531 sizeof(cur_machine_random_cpu));
532 m->use_random_bootstrap_cpu =
533 parse_on_off(cur_machine_random_cpu);
534
535 m->byte_order_override = NO_BYTE_ORDER_OVERRIDE;
536 if (cur_machine_byte_order[0]) {
537 if (strncasecmp(cur_machine_byte_order, "big", 3) == 0)
538 m->byte_order_override = EMUL_BIG_ENDIAN;
539 else if (strncasecmp(cur_machine_byte_order, "little",
540 6) == 0)
541 m->byte_order_override = EMUL_LITTLE_ENDIAN;
542 else {
543 fatal("Byte order must be big-endian or"
544 " little-endian\n");
545 exit(1);
546 }
547 }
548
549 if (!cur_machine_bintrans[0])
550 strlcpy(cur_machine_bintrans, "yes",
551 sizeof(cur_machine_bintrans));
552 m->bintrans_enable = m->bintrans_enabled_from_start =
553 parse_on_off(cur_machine_bintrans);
554
555 if (!cur_machine_old_bintrans[0])
556 strlcpy(cur_machine_old_bintrans, "yes",
557 sizeof(cur_machine_old_bintrans));
558 m->old_bintrans_enable = parse_on_off(cur_machine_old_bintrans);
559
560 if (!m->bintrans_enable && m->old_bintrans_enable)
561 m->old_bintrans_enable = 0;
562
563 /* TODO: Hm... */
564 if (m->bintrans_enable && m->arch == ARCH_MIPS)
565 m->speed_tricks = 0;
566
567 if (cur_machine_bintrans_size[0])
568 m->bintrans_size = 1048576 *
569 atoi(cur_machine_bintrans_size);
570
571 if (!cur_machine_force_netboot[0])
572 strlcpy(cur_machine_force_netboot, "no",
573 sizeof(cur_machine_force_netboot));
574 m->force_netboot = parse_on_off(cur_machine_force_netboot);
575
576 if (!cur_machine_start_paused[0])
577 strlcpy(cur_machine_start_paused, "no",
578 sizeof(cur_machine_start_paused));
579 m->start_paused = parse_on_off(cur_machine_start_paused);
580
581 /* NOTE: Default nr of CPUs is 0: */
582 if (!cur_machine_ncpus[0])
583 strlcpy(cur_machine_ncpus, "0",
584 sizeof(cur_machine_ncpus));
585 m->ncpus = atoi(cur_machine_ncpus);
586
587 if (cur_machine_n_gfx_cards[0])
588 m->n_gfx_cards = atoi(cur_machine_n_gfx_cards);
589
590 if (cur_machine_serial_nr[0]) {
591 m->serial_nr = atoi(cur_machine_serial_nr);
592 e->next_serial_nr = m->serial_nr+1;
593 }
594
595 if (cur_machine_emulated_hz[0]) {
596 m->emulated_hz = mystrtoull(cur_machine_emulated_hz,
597 NULL, 0);
598 m->automatic_clock_adjustment = 0;
599 }
600
601 /* NOTE: Default nr of CPUs is 0: */
602 if (!cur_machine_memory[0])
603 strlcpy(cur_machine_memory, "0",
604 sizeof(cur_machine_memory));
605 m->physical_ram_in_mb = atoi(cur_machine_memory);
606
607 if (cur_machine_max_random_cycles[0]) {
608 if (m->bintrans_enable) {
609 fprintf(stderr, "max_random_cycles doesn't"
610 " work with bintrans\n");
611 exit(1);
612 }
613 m->max_random_cycles_per_chunk = atoi(
614 cur_machine_max_random_cycles);
615 }
616
617 if (!cur_machine_x11_scaledown[0])
618 m->x11_scaledown = 1;
619 else {
620 m->x11_scaledown = atoi(cur_machine_x11_scaledown);
621 if (m->x11_scaledown < 0) {
622 m->x11_scaleup = 0 - m->x11_scaledown;
623 m->x11_scaledown = 1;
624 }
625 if (m->x11_scaledown < 1) {
626 fprintf(stderr, "Invalid scaledown value"
627 " (%i)\n", m->x11_scaledown);
628 exit(1);
629 }
630 }
631
632 for (i=0; i<cur_machine_n_disk; i++) {
633 diskimage_add(m, cur_machine_disk[i]);
634 free(cur_machine_disk[i]);
635 cur_machine_disk[i] = NULL;
636 }
637
638 m->boot_kernel_filename = strdup(cur_machine_bootname);
639
640 if (cur_machine_bootarg[0])
641 m->boot_string_argument = strdup(cur_machine_bootarg);
642
643 for (i=0; i<cur_machine_n_x11_disp; i++) {
644 m->x11_n_display_names ++;
645 m->x11_display_names = realloc(
646 m->x11_display_names, m->x11_n_display_names
647 * sizeof(char *));
648 if (m->x11_display_names == NULL) {
649 printf("out of memory\n");
650 exit(1);
651 }
652 m->x11_display_names[m->x11_n_display_names-1] =
653 strdup(cur_machine_x11_disp[i]);
654 if (m->x11_display_names
655 [m->x11_n_display_names-1] == NULL) {
656 printf("out of memory\n");
657 exit(1);
658 }
659 free(cur_machine_x11_disp[i]);
660 cur_machine_x11_disp[i] = NULL;
661 }
662
663 emul_machine_setup(m,
664 cur_machine_n_load, cur_machine_load,
665 cur_machine_n_device, cur_machine_device);
666
667 for (i=0; i<cur_machine_n_device; i++) {
668 free(cur_machine_device[i]);
669 cur_machine_device[i] = NULL;
670 }
671
672 for (i=0; i<cur_machine_n_load; i++) {
673 free(cur_machine_load[i]);
674 cur_machine_load[i] = NULL;
675 }
676
677 *parsestate = PARSESTATE_EMUL;
678 return;
679 }
680
681 WORD("name", cur_machine_name);
682 WORD("cpu", cur_machine_cpu);
683 WORD("type", cur_machine_type);
684 WORD("subtype", cur_machine_subtype);
685 WORD("bootname", cur_machine_bootname);
686 WORD("bootarg", cur_machine_bootarg);
687 WORD("slow_serial_interrupts_hack_for_linux", cur_machine_slowsi);
688 WORD("debugger_on_badaddr", cur_machine_debugger_on_badaddr);
689 WORD("prom_emulation", cur_machine_prom_emulation);
690 WORD("use_x11", cur_machine_use_x11);
691 WORD("x11_scaledown", cur_machine_x11_scaledown);
692 WORD("bintrans", cur_machine_bintrans);
693 WORD("old_bintrans", cur_machine_old_bintrans);
694 WORD("bintrans_size", cur_machine_bintrans_size);
695 WORD("byte_order", cur_machine_byte_order);
696 WORD("random_mem_contents", cur_machine_random_mem);
697 WORD("use_random_bootstrap_cpu", cur_machine_random_cpu);
698 WORD("force_netboot", cur_machine_force_netboot);
699 WORD("ncpus", cur_machine_ncpus);
700 WORD("serial_nr", cur_machine_serial_nr);
701 WORD("n_gfx_cards", cur_machine_n_gfx_cards);
702 WORD("emulated_hz", cur_machine_emulated_hz);
703 WORD("memory", cur_machine_memory);
704 WORD("max_random_cycles", cur_machine_max_random_cycles);
705 WORD("start_paused", cur_machine_start_paused);
706
707 if (strcmp(word, "load") == 0) {
708 read_one_word(f, word, maxbuflen,
709 line, EXPECT_LEFT_PARENTHESIS);
710 if (cur_machine_n_load >= MAX_N_LOAD) {
711 fprintf(stderr, "too many loads\n");
712 exit(1);
713 }
714 cur_machine_load[cur_machine_n_load] = malloc(MAX_LOAD_LEN);
715 if (cur_machine_load[cur_machine_n_load] == NULL) {
716 fprintf(stderr, "out of memory\n");
717 exit(1);
718 }
719 read_one_word(f, cur_machine_load[cur_machine_n_load],
720 MAX_LOAD_LEN, line, EXPECT_WORD);
721 cur_machine_n_load ++;
722 read_one_word(f, word, maxbuflen,
723 line, EXPECT_RIGHT_PARENTHESIS);
724 return;
725 }
726
727 if (strcmp(word, "disk") == 0) {
728 read_one_word(f, word, maxbuflen,
729 line, EXPECT_LEFT_PARENTHESIS);
730 if (cur_machine_n_disk >= MAX_N_DISK) {
731 fprintf(stderr, "too many disks\n");
732 exit(1);
733 }
734 cur_machine_disk[cur_machine_n_disk] = malloc(MAX_DISK_LEN);
735 if (cur_machine_disk[cur_machine_n_disk] == NULL) {
736 fprintf(stderr, "out of memory\n");
737 exit(1);
738 }
739 read_one_word(f, cur_machine_disk[cur_machine_n_disk],
740 MAX_DISK_LEN, line, EXPECT_WORD);
741 cur_machine_n_disk ++;
742 read_one_word(f, word, maxbuflen,
743 line, EXPECT_RIGHT_PARENTHESIS);
744 return;
745 }
746
747 if (strcmp(word, "device") == 0) {
748 read_one_word(f, word, maxbuflen,
749 line, EXPECT_LEFT_PARENTHESIS);
750 if (cur_machine_n_device >= MAX_N_DEVICE) {
751 fprintf(stderr, "too many devices\n");
752 exit(1);
753 }
754 cur_machine_device[cur_machine_n_device] =
755 malloc(MAX_DEVICE_LEN);
756 if (cur_machine_device[cur_machine_n_device] == NULL) {
757 fprintf(stderr, "out of memory\n");
758 exit(1);
759 }
760 read_one_word(f, cur_machine_device[cur_machine_n_device],
761 MAX_DEVICE_LEN, line, EXPECT_WORD);
762 cur_machine_n_device ++;
763 read_one_word(f, word, maxbuflen,
764 line, EXPECT_RIGHT_PARENTHESIS);
765 return;
766 }
767
768 if (strcmp(word, "add_x11_display") == 0) {
769 read_one_word(f, word, maxbuflen,
770 line, EXPECT_LEFT_PARENTHESIS);
771 if (cur_machine_n_x11_disp >= MAX_N_X11_DISP) {
772 fprintf(stderr, "too many x11 displays\n");
773 exit(1);
774 }
775 cur_machine_x11_disp[cur_machine_n_x11_disp] =
776 malloc(MAX_X11_DISP_LEN);
777 if (cur_machine_x11_disp[cur_machine_n_x11_disp] == NULL) {
778 fprintf(stderr, "out of memory\n");
779 exit(1);
780 }
781 read_one_word(f, cur_machine_x11_disp[cur_machine_n_x11_disp],
782 MAX_X11_DISP_LEN, line, EXPECT_WORD);
783 cur_machine_n_x11_disp ++;
784 read_one_word(f, word, maxbuflen,
785 line, EXPECT_RIGHT_PARENTHESIS);
786 return;
787 }
788
789 fatal("line %i: not expecting '%s' in a 'machine' section\n",
790 *line, word);
791 exit(1);
792 }
793
794
795 /*
796 * emul_parse_config():
797 *
798 * Set up an emulation by parsing a config file.
799 */
800 void emul_parse_config(struct emul *e, FILE *f)
801 {
802 char word[500];
803 int in_emul = 0;
804 int line = 1;
805 int parsestate = PARSESTATE_NONE;
806
807 /* debug("emul_parse_config()\n"); */
808
809 while (!feof(f)) {
810 read_one_word(f, word, sizeof(word), &line,
811 EXPECT_WORD | EXPECT_RIGHT_PARENTHESIS);
812 if (!word[0])
813 break;
814
815 /* debug("word = '%s'\n", word); */
816
817 switch (parsestate) {
818 case PARSESTATE_NONE:
819 parse__none(e, f, &in_emul, &line, &parsestate,
820 word, sizeof(word));
821 break;
822 case PARSESTATE_EMUL:
823 parse__emul(e, f, &in_emul, &line, &parsestate,
824 word, sizeof(word));
825 break;
826 case PARSESTATE_NET:
827 parse__net(e, f, &in_emul, &line, &parsestate,
828 word, sizeof(word));
829 break;
830 case PARSESTATE_MACHINE:
831 parse__machine(e, f, &in_emul, &line, &parsestate,
832 word, sizeof(word));
833 break;
834 default:
835 fatal("INTERNAL ERROR in emul_parse.c ("
836 "parsestate %i is not imlemented yet?)\n",
837 parsestate);
838 exit(1);
839 }
840 }
841
842 if (parsestate != PARSESTATE_NONE) {
843 fatal("EOF but not enough right parentheses?\n");
844 exit(1);
845 }
846 }
847

  ViewVC Help
Powered by ViewVC 1.1.26