/[gxemul]/trunk/src/emul_parse.c
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Annotation of /trunk/src/emul_parse.c

Parent Directory Parent Directory | Revision Log Revision Log


Revision 20 - (hide annotations)
Mon Oct 8 16:19:23 2007 UTC (16 years, 6 months ago) by dpavlin
File MIME type: text/plain
File size: 23028 byte(s)
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1055 2005/11/25 22:48:36 debug Exp $
20051031	Adding disassembly support for more ARM instructions (clz,
		smul* etc), and adding a hack to support "new tiny" pages
		for StrongARM.
20051101	Minor documentation updates (NetBSD 2.0.2 -> 2.1, and OpenBSD
		3.7 -> 3.8, and lots of testing).
		Changing from 1-sector PIO mode 0 transfers to 128-sector PIO
		mode 3 (in dev_wdc).
		Various minor ARM dyntrans updates (pc-relative loads from
		within the same page as the instruction are now treated as
		constant "mov").
20051102	Re-enabling instruction combinations (they were accidentally
		disabled).
		Dyntrans TLB entries are now overwritten using a round-robin
		scheme instead of randomly. This increases performance.
		Fixing a typo in file.c (thanks to Chuan-Hua Chang for
		noticing it).
		Experimenting with adding ATAPI support to dev_wdc (to make
		emulated *BSD detect cdroms as cdroms, not harddisks).
20051104	Various minor updates.
20051105	Continuing on the ATAPI emulation. Seems to work well enough
		for a NetBSD/cats installation, but not OpenBSD/cats.
		Various other updates.
20051106	Modifying the -Y command line option to allow scaleup with
		certain graphic controllers (only dev_vga so far), not just
		scaledown.
		Some minor dyntrans cleanups.
20051107	Beginning a cleanup up the PCI subsystem (removing the
		read_register hack, etc).
20051108	Continuing the cleanup; splitting up some pci devices into a
		normal autodev device and some separate pci glue code.
20051109	Continuing on the PCI bus stuff; all old pci_*.c have been
		incorporated into normal devices and/or rewritten as glue code
		only, adding a dummy Intel 82371AB PIIX4 for Malta (not really
		tested yet).
		Minor pckbc fix so that Linux doesn't complain.
		Working on the DEC 21143 NIC (ethernet mac rom stuff mostly).
		Various other minor fixes.
20051110	Some more ARM dyntrans fine-tuning (e.g. some instruction
		combinations (cmps followed by conditional branch within the
		same page) and special cases for DPIs with regform when the
		shifter isn't used).
20051111	ARM dyntrans updates: O(n)->O(1) for just-mark-as-non-
		writable in the generic pc_to_pointers function, and some other
		minor hacks.
		Merging Cobalt and evbmips (Malta) ISA interrupt handling,
		and some minor fixes to allow Linux to accept harddisk irqs.
20051112	Minor device updates (pckbc, dec21143, lpt, ...), most
		importantly fixing the ALI M1543/M5229 so that harddisk irqs
		work with Linux/CATS.
20051113	Some more generalizations of the PCI subsystem.
		Finally took the time to add a hack for SCSI CDROM TOCs; this
		enables OpenBSD to use partition 'a' (as needed by the OpenBSD
		installer), and Windows NT's installer to get a bit further.
		Also fixing dev_wdc to allow Linux to detect ATAPI CDROMs.
		Continuing on the DEC 21143.
20051114	Minor ARM dyntrans tweaks; ARM cmps+branch optimization when
		comparing with 0, and generalizing the xchg instr. comb.
		Adding disassembly of ARM mrrc/mcrr and q{,d}{add,sub}.
20051115	Continuing on various PPC things (BATs, other address trans-
		lation things, various loads/stores, BeBox emulation, etc.).
		Beginning to work on PPC interrupt/exception support.
20051116	Factoring out some code which initializes legacy ISA devices
		from those machines that use them (bus_isa).
		Continuing on PPC interrupt/exception support.
20051117	Minor Malta fixes: RTC year offset = 80, disabling a speed hack
		which caused NetBSD to detect a too fast cpu, and adding a new
		hack to make Linux detect a faster cpu.
		Continuing on the Artesyn PM/PPC emulation mode.
		Adding an Algor emulation skeleton (P4032 and P5064);
		implementing some of the basics.
		Continuing on PPC emulation in general; usage of unimplemented
		SPRs is now easier to track, continuing on memory/exception
		related issues, etc.
20051118	More work on PPC emulation (tgpr0..3, exception handling,
		memory stuff, syscalls, etc.).
20051119	Changing the ARM dyntrans code to mostly use cpu->pc, and not
		necessarily use arm reg 15. Seems to work.
		Various PPC updates; continuing on the PReP emulation mode.
20051120	Adding a workaround/hack to dev_mc146818 to allow NetBSD/prep
		to detect the clock.
20051121	More cleanup of the PCI bus (memory and I/O bases, etc).
		Continuing on various PPC things (decrementer and timebase,
		WDCs on obio (on PReP) use irq 13, not 14/15).
20051122	Continuing on the CPC700 controller (interrupts etc) for PMPPC,
		and on PPC stuff in general.
		Finally! After some bug fixes to the virtual to physical addr
		translation, NetBSD/{prep,pmppc} 2.1 reach userland and are
		stable enough to be interacted with.
		More PCI updates; reverse-endian device access for PowerPC etc.
20051123	Generalizing the IEEE floating point subsystem (moving it out
		from src/cpus/cpu_mips_coproc.c into a new src/float_emul.c).
		Input via slave xterms was sometimes not really working; fixing
		this for ns16550, and a warning message is now displayed if
		multiple non-xterm consoles are active.
		Adding some PPC floating point support, etc.
		Various interrupt related updates (dev_wdc, _ns16550, _8259,
		and the isa32 common code in machine.c).
		NetBSD/prep can now be installed! :-) (Well, with some manual
		commands necessary before running sysinst.) Updating the
		documentation and various other things to reflect this.
20051124	Various minor documentation updates.
		Continuing the work on the DEC 21143 NIC.
20051125	LOTS of work on the 21143. Both OpenBSD and NetBSD work fine
		with it now, except that OpenBSD sometimes gives a time-out
		warning.
		Minor documentation updates.

==============  RELEASE 0.3.7  ==============


1 dpavlin 2 /*
2     * Copyright (C) 2005 Anders Gavare. All rights reserved.
3     *
4     * Redistribution and use in source and binary forms, with or without
5     * modification, are permitted provided that the following conditions are met:
6     *
7     * 1. Redistributions of source code must retain the above copyright
8     * notice, this list of conditions and the following disclaimer.
9     * 2. Redistributions in binary form must reproduce the above copyright
10     * notice, this list of conditions and the following disclaimer in the
11     * documentation and/or other materials provided with the distribution.
12     * 3. The name of the author may not be used to endorse or promote products
13     * derived from this software without specific prior written permission.
14     *
15     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18     * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25     * SUCH DAMAGE.
26     *
27     *
28 dpavlin 20 * $Id: emul_parse.c,v 1.35 2005/11/06 21:15:55 debug Exp $
29 dpavlin 2 *
30     * Set up an emulation by parsing a config file.
31     *
32     * TODO: This could be extended to support XML config files as well, but
33 dpavlin 10 * XML is ugly. It is ugly right now as well. The question is: which
34     * solution is the least ugly?
35 dpavlin 2 */
36    
37     #include <stdio.h>
38     #include <stdlib.h>
39     #include <string.h>
40    
41     #include "diskimage.h"
42     #include "emul.h"
43     #include "machine.h"
44     #include "misc.h"
45     #include "net.h"
46    
47    
48     #define is_word_char(ch) ( \
49     (ch >= 'a' && ch <= 'z') || (ch >= 'A' && ch <= 'Z') || \
50     ch == '_' || ch == '$' || (ch >= '0' && ch <= '9') )
51    
52    
53     #define EXPECT_WORD 1
54     #define EXPECT_LEFT_PARENTHESIS 2
55     #define EXPECT_RIGHT_PARENTHESIS 4
56    
57    
58     /*
59     * read_one_word():
60     *
61     * Reads the file f until it has read a complete word. Whitespace is ignored,
62     * and also any exclamation mark ('!') and anything following an exclamation
63     * mark on a line.
64     *
65     * Used internally by emul_parse_config().
66     */
67     static void read_one_word(FILE *f, char *buf, int buflen, int *line,
68     int expect)
69     {
70     int ch;
71     int done = 0;
72     int curlen = 0;
73     int in_word = 0;
74    
75     while (!done) {
76     if (curlen >= buflen - 1)
77     break;
78    
79     ch = fgetc(f);
80     if (ch == EOF)
81     break;
82    
83     if (in_word) {
84     if (is_word_char(ch)) {
85     buf[curlen++] = ch;
86     if (curlen == buflen - 1)
87     done = 1;
88     continue;
89     } else {
90     if (ungetc(ch, f) == EOF) {
91     fatal("ungetc() failed?\n");
92     exit(1);
93     }
94     break;
95     }
96     }
97    
98     if (ch == '\n') {
99     (*line) ++;
100     continue;
101     }
102    
103     if (ch == '\r')
104     continue;
105    
106     if (ch == '!') {
107     /* Skip until newline: */
108     while (ch != '\n' && ch != EOF)
109     ch = fgetc(f);
110     if (ch == '\n')
111     (*line) ++;
112     continue;
113     }
114    
115     if (ch == '{') {
116     int depth = 1;
117    
118     /* Skip until '}': */
119     while (depth > 0) {
120     ch = fgetc(f);
121     if (ch == '\n')
122     (*line) ++;
123     if (ch == '{')
124     depth ++;
125     if (ch == '}')
126     depth --;
127     if (ch == EOF) {
128     fatal("line %i: unexpected EOF inside"
129     " a nested comment\n", *line);
130     exit(1);
131     }
132     }
133     continue;
134     }
135    
136     /* Whitespace? */
137     if (ch <= ' ')
138     continue;
139    
140     if (ch == '"' || ch == '\'') {
141     /* This is a quoted word. */
142     int start_ch = ch;
143    
144     if (expect & EXPECT_LEFT_PARENTHESIS) {
145     fatal("unexpected character '%c', line %i\n",
146     ch, *line);
147     exit(1);
148     }
149    
150     while (curlen < buflen - 1) {
151     ch = fgetc(f);
152     if (ch == '\n') {
153     fatal("line %i: newline inside"
154     " quotes?\n", *line);
155     exit(1);
156     }
157     if (ch == EOF) {
158     fatal("line %i: EOF inside a quoted"
159     " string?\n", *line);
160     exit(1);
161     }
162     if (ch == start_ch)
163     break;
164     buf[curlen++] = ch;
165     }
166     break;
167     }
168    
169     if ((expect & EXPECT_WORD) && is_word_char(ch)) {
170     buf[curlen++] = ch;
171     in_word = 1;
172     if (curlen == buflen - 1)
173     done = 1;
174     } else {
175     if ((expect & EXPECT_LEFT_PARENTHESIS) && ch == '(') {
176     buf[curlen++] = ch;
177     break;
178     }
179     if ((expect & EXPECT_RIGHT_PARENTHESIS) && ch == ')') {
180     buf[curlen++] = ch;
181     break;
182     }
183    
184     fatal("unexpected character '%c', line %i\n",
185     ch, *line);
186     exit(1);
187     }
188     }
189    
190     buf[curlen] = '\0';
191     }
192    
193    
194     #define PARSESTATE_NONE 0
195     #define PARSESTATE_EMUL 1
196     #define PARSESTATE_NET 2
197     #define PARSESTATE_MACHINE 3
198    
199     static char cur_net_ipv4net[50];
200     static char cur_net_ipv4len[50];
201 dpavlin 10 static char cur_net_local_port[10];
202     #define MAX_N_REMOTE 20
203     #define MAX_REMOTE_LEN 100
204     static char *cur_net_remote[MAX_N_REMOTE];
205     static int cur_net_n_remote;
206 dpavlin 2
207     static char cur_machine_name[50];
208     static char cur_machine_cpu[50];
209     static char cur_machine_type[50];
210     static char cur_machine_subtype[50];
211     static char cur_machine_bootname[150];
212     static char cur_machine_bootarg[250];
213     static char cur_machine_slowsi[10];
214     static char cur_machine_debugger_on_badaddr[10];
215     static char cur_machine_prom_emulation[10];
216     static char cur_machine_use_x11[10];
217     static char cur_machine_x11_scaledown[10];
218     static char cur_machine_bintrans[10];
219     static char cur_machine_old_bintrans[10];
220     static char cur_machine_bintrans_size[10];
221     static char cur_machine_byte_order[20];
222     static char cur_machine_random_mem[10];
223     static char cur_machine_random_cpu[10];
224     static char cur_machine_force_netboot[10];
225     static char cur_machine_start_paused[10];
226     static char cur_machine_ncpus[10];
227     static char cur_machine_n_gfx_cards[10];
228     static char cur_machine_serial_nr[10];
229     static char cur_machine_emulated_hz[10];
230     static char cur_machine_memory[10];
231 dpavlin 12 static char cur_machine_max_random_cycles[10];
232 dpavlin 2 #define MAX_N_LOAD 15
233     #define MAX_LOAD_LEN 2000
234     static char *cur_machine_load[MAX_N_LOAD];
235     static int cur_machine_n_load;
236     #define MAX_N_DISK 10
237     #define MAX_DISK_LEN 2000
238     static char *cur_machine_disk[MAX_N_DISK];
239     static int cur_machine_n_disk;
240     #define MAX_N_DEVICE 20
241     #define MAX_DEVICE_LEN 400
242     static char *cur_machine_device[MAX_N_DISK];
243     static int cur_machine_n_device;
244     #define MAX_N_X11_DISP 5
245     #define MAX_X11_DISP_LEN 1000
246     static char *cur_machine_x11_disp[MAX_N_X11_DISP];
247     static int cur_machine_n_x11_disp;
248    
249     #define WORD(w,var) { \
250     if (strcmp(word, w) == 0) { \
251     read_one_word(f, word, maxbuflen, \
252     line, EXPECT_LEFT_PARENTHESIS); \
253     read_one_word(f, var, sizeof(var), \
254     line, EXPECT_WORD); \
255     read_one_word(f, word, maxbuflen, \
256     line, EXPECT_RIGHT_PARENTHESIS); \
257     return; \
258     } \
259     }
260    
261    
262     /*
263     * parse_on_off():
264     *
265     * Returns 1 for "on", "yes", "enable", or "1".
266     * Returns 0 for "off", "no", "disable", or "0".
267     * Prints a fatal warning and exit()s for other values.
268     */
269     int parse_on_off(char *s)
270     {
271     if (strcasecmp(s, "on") == 0 || strcasecmp(s, "yes") == 0 ||
272     strcasecmp(s, "enable") == 0 || strcasecmp(s, "1") == 0)
273     return 1;
274     if (strcasecmp(s, "off") == 0 || strcasecmp(s, "no") == 0 ||
275     strcasecmp(s, "disable") == 0 || strcasecmp(s, "0") == 0)
276     return 0;
277    
278     fatal("parse_on_off(): unknown value '%s'\n", s);
279     exit(1);
280     }
281    
282    
283     /*
284     * parse__none():
285     *
286     * emul ( [...] )
287     */
288     static void parse__none(struct emul *e, FILE *f, int *in_emul, int *line,
289     int *parsestate, char *word, size_t maxbuflen)
290     {
291     if (strcmp(word, "emul") == 0) {
292     if (*in_emul) {
293     fatal("line %i: only one emul per config "
294     "file is supported!\n", *line);
295     exit(1);
296     }
297     *parsestate = PARSESTATE_EMUL;
298     *in_emul = 1;
299     read_one_word(f, word, maxbuflen,
300     line, EXPECT_LEFT_PARENTHESIS);
301     return;
302     }
303    
304     fatal("line %i: expecting 'emul', not '%s'\n", *line, word);
305     exit(1);
306     }
307    
308    
309     /*
310     * parse__emul():
311     *
312     * name, net, machine
313     */
314     static void parse__emul(struct emul *e, FILE *f, int *in_emul, int *line,
315     int *parsestate, char *word, size_t maxbuflen)
316     {
317     if (word[0] == ')') {
318     *parsestate = PARSESTATE_NONE;
319     return;
320     }
321    
322     if (strcmp(word, "name") == 0) {
323     char tmp[200];
324     read_one_word(f, word, maxbuflen,
325     line, EXPECT_LEFT_PARENTHESIS);
326     read_one_word(f, tmp, sizeof(tmp), line, EXPECT_WORD);
327     read_one_word(f, word, maxbuflen,
328     line, EXPECT_RIGHT_PARENTHESIS);
329     if (e->name != NULL) {
330     free(e->name);
331     e->name = NULL;
332     }
333     e->name = strdup(tmp);
334     if (e->name == NULL) {
335     fprintf(stderr, "out of memory in parse__emul()\n");
336     exit(1);
337     }
338     debug("name: \"%s\"\n", e->name);
339     return;
340     }
341    
342     if (strcmp(word, "net") == 0) {
343     *parsestate = PARSESTATE_NET;
344     read_one_word(f, word, maxbuflen,
345     line, EXPECT_LEFT_PARENTHESIS);
346    
347     /* Default net: */
348 dpavlin 10 strlcpy(cur_net_ipv4net, "10.0.0.0", sizeof(cur_net_ipv4net));
349     strlcpy(cur_net_ipv4len, "8", sizeof(cur_net_ipv4len));
350     strlcpy(cur_net_local_port, "", sizeof(cur_net_local_port));
351     cur_net_n_remote = 0;
352 dpavlin 2 return;
353     }
354    
355     if (strcmp(word, "machine") == 0) {
356     *parsestate = PARSESTATE_MACHINE;
357     read_one_word(f, word, maxbuflen,
358     line, EXPECT_LEFT_PARENTHESIS);
359    
360     /* A "zero state": */
361     cur_machine_name[0] = '\0';
362     cur_machine_cpu[0] = '\0';
363     cur_machine_type[0] = '\0';
364     cur_machine_subtype[0] = '\0';
365     cur_machine_bootname[0] = '\0';
366     cur_machine_bootarg[0] = '\0';
367     cur_machine_n_load = 0;
368     cur_machine_n_disk = 0;
369     cur_machine_n_device = 0;
370     cur_machine_n_x11_disp = 0;
371     cur_machine_slowsi[0] = '\0';
372     cur_machine_debugger_on_badaddr[0] = '\0';
373     cur_machine_prom_emulation[0] = '\0';
374     cur_machine_use_x11[0] = '\0';
375     cur_machine_x11_scaledown[0] = '\0';
376     cur_machine_bintrans[0] = '\0';
377     cur_machine_old_bintrans[0] = '\0';
378     cur_machine_bintrans_size[0] = '\0';
379     cur_machine_byte_order[0] = '\0';
380     cur_machine_random_mem[0] = '\0';
381     cur_machine_random_cpu[0] = '\0';
382     cur_machine_force_netboot[0] = '\0';
383     cur_machine_start_paused[0] = '\0';
384     cur_machine_ncpus[0] = '\0';
385     cur_machine_n_gfx_cards[0] = '\0';
386     cur_machine_serial_nr[0] = '\0';
387     cur_machine_emulated_hz[0] = '\0';
388     cur_machine_memory[0] = '\0';
389 dpavlin 12 cur_machine_max_random_cycles[0] = '\0';
390 dpavlin 2 return;
391     }
392    
393     fatal("line %i: not expecting '%s' in an 'emul' section\n",
394     *line, word);
395     exit(1);
396     }
397    
398    
399     /*
400     * parse__net():
401     *
402 dpavlin 10 * Simple words: ipv4net, ipv4len, local_port
403 dpavlin 2 *
404 dpavlin 10 * Complex: add_remote
405     *
406 dpavlin 2 * TODO: more words? for example an option to disable the gateway? that would
407     * have to be implemented correctly in src/net.c first.
408     */
409     static void parse__net(struct emul *e, FILE *f, int *in_emul, int *line,
410     int *parsestate, char *word, size_t maxbuflen)
411     {
412 dpavlin 10 int i;
413    
414 dpavlin 2 if (word[0] == ')') {
415     /* Finished with the 'net' section. Let's create the net: */
416     if (e->net != NULL) {
417     fatal("line %i: more than one net isn't really "
418     "supported yet\n", *line);
419     exit(1);
420     }
421    
422 dpavlin 10 if (!cur_net_local_port[0])
423     strlcpy(cur_net_local_port, "0",
424     sizeof(cur_net_local_port));
425    
426 dpavlin 2 e->net = net_init(e, NET_INIT_FLAG_GATEWAY,
427 dpavlin 10 cur_net_ipv4net, atoi(cur_net_ipv4len),
428     cur_net_remote, cur_net_n_remote,
429     atoi(cur_net_local_port));
430 dpavlin 2
431     if (e->net == NULL) {
432     fatal("line %i: fatal error: could not create"
433     " the net (?)\n", *line);
434     exit(1);
435     }
436    
437 dpavlin 10 for (i=0; i<cur_net_n_remote; i++) {
438     free(cur_net_remote[i]);
439     cur_net_remote[i] = NULL;
440     }
441    
442 dpavlin 2 *parsestate = PARSESTATE_EMUL;
443     return;
444     }
445    
446     WORD("ipv4net", cur_net_ipv4net);
447     WORD("ipv4len", cur_net_ipv4len);
448 dpavlin 10 WORD("local_port", cur_net_local_port);
449 dpavlin 2
450 dpavlin 10 if (strcmp(word, "add_remote") == 0) {
451     read_one_word(f, word, maxbuflen,
452     line, EXPECT_LEFT_PARENTHESIS);
453     if (cur_net_n_remote >= MAX_N_REMOTE) {
454     fprintf(stderr, "too many remote networks\n");
455     exit(1);
456     }
457     cur_net_remote[cur_net_n_remote] = malloc(MAX_REMOTE_LEN);
458     if (cur_net_remote[cur_net_n_remote] == NULL) {
459     fprintf(stderr, "out of memory\n");
460     exit(1);
461     }
462     read_one_word(f, cur_net_remote[cur_net_n_remote],
463     MAX_REMOTE_LEN, line, EXPECT_WORD);
464     cur_net_n_remote ++;
465     read_one_word(f, word, maxbuflen, line,
466     EXPECT_RIGHT_PARENTHESIS);
467     return;
468     }
469    
470 dpavlin 2 fatal("line %i: not expecting '%s' in a 'net' section\n", *line, word);
471     exit(1);
472     }
473    
474    
475     /*
476     * parse__machine():
477     */
478     static void parse__machine(struct emul *e, FILE *f, int *in_emul, int *line,
479     int *parsestate, char *word, size_t maxbuflen)
480     {
481     int r, i;
482    
483     if (word[0] == ')') {
484     /* Finished with the 'machine' section. */
485     struct machine *m;
486    
487     if (!cur_machine_name[0])
488 dpavlin 10 strlcpy(cur_machine_name, "no_name",
489     sizeof(cur_machine_name));
490 dpavlin 2
491     m = emul_add_machine(e, cur_machine_name);
492    
493     r = machine_name_to_type(cur_machine_type, cur_machine_subtype,
494     &m->machine_type, &m->machine_subtype, &m->arch);
495     if (!r)
496     exit(1);
497    
498     if (cur_machine_cpu[0])
499     m->cpu_name = strdup(cur_machine_cpu);
500    
501     if (!cur_machine_use_x11[0])
502 dpavlin 10 strlcpy(cur_machine_use_x11, "no",
503     sizeof(cur_machine_use_x11));
504 dpavlin 2 m->use_x11 = parse_on_off(cur_machine_use_x11);
505    
506     if (!cur_machine_slowsi[0])
507 dpavlin 10 strlcpy(cur_machine_slowsi, "no",
508     sizeof(cur_machine_slowsi));
509 dpavlin 2 m->slow_serial_interrupts_hack_for_linux =
510     parse_on_off(cur_machine_slowsi);
511    
512     if (!cur_machine_debugger_on_badaddr[0])
513 dpavlin 10 strlcpy(cur_machine_debugger_on_badaddr, "no",
514     sizeof(cur_machine_debugger_on_badaddr));
515 dpavlin 2 m->single_step_on_bad_addr =
516     parse_on_off(cur_machine_debugger_on_badaddr);
517    
518     if (!cur_machine_prom_emulation[0])
519 dpavlin 10 strlcpy(cur_machine_prom_emulation, "yes",
520     sizeof(cur_machine_prom_emulation));
521 dpavlin 2 m->prom_emulation = parse_on_off(cur_machine_prom_emulation);
522    
523     if (!cur_machine_random_mem[0])
524 dpavlin 10 strlcpy(cur_machine_random_mem, "no",
525     sizeof(cur_machine_random_mem));
526 dpavlin 2 m->random_mem_contents =
527     parse_on_off(cur_machine_random_mem);
528    
529     if (!cur_machine_random_cpu[0])
530 dpavlin 10 strlcpy(cur_machine_random_cpu, "no",
531     sizeof(cur_machine_random_cpu));
532 dpavlin 2 m->use_random_bootstrap_cpu =
533     parse_on_off(cur_machine_random_cpu);
534    
535     m->byte_order_override = NO_BYTE_ORDER_OVERRIDE;
536     if (cur_machine_byte_order[0]) {
537     if (strncasecmp(cur_machine_byte_order, "big", 3) == 0)
538     m->byte_order_override = EMUL_BIG_ENDIAN;
539     else if (strncasecmp(cur_machine_byte_order, "little",
540     6) == 0)
541     m->byte_order_override = EMUL_LITTLE_ENDIAN;
542     else {
543     fatal("Byte order must be big-endian or"
544     " little-endian\n");
545     exit(1);
546     }
547     }
548    
549     if (!cur_machine_bintrans[0])
550 dpavlin 10 strlcpy(cur_machine_bintrans, "yes",
551     sizeof(cur_machine_bintrans));
552 dpavlin 2 m->bintrans_enable = m->bintrans_enabled_from_start =
553     parse_on_off(cur_machine_bintrans);
554    
555     if (!cur_machine_old_bintrans[0])
556 dpavlin 10 strlcpy(cur_machine_old_bintrans, "yes",
557     sizeof(cur_machine_old_bintrans));
558 dpavlin 2 m->old_bintrans_enable = parse_on_off(cur_machine_old_bintrans);
559    
560 dpavlin 12 if (!m->bintrans_enable && m->old_bintrans_enable)
561     m->old_bintrans_enable = 0;
562 dpavlin 2
563     /* TODO: Hm... */
564 dpavlin 20 if (m->bintrans_enable && m->arch == ARCH_MIPS)
565 dpavlin 2 m->speed_tricks = 0;
566    
567     if (cur_machine_bintrans_size[0])
568     m->bintrans_size = 1048576 *
569     atoi(cur_machine_bintrans_size);
570    
571     if (!cur_machine_force_netboot[0])
572 dpavlin 10 strlcpy(cur_machine_force_netboot, "no",
573     sizeof(cur_machine_force_netboot));
574 dpavlin 2 m->force_netboot = parse_on_off(cur_machine_force_netboot);
575    
576     if (!cur_machine_start_paused[0])
577 dpavlin 10 strlcpy(cur_machine_start_paused, "no",
578     sizeof(cur_machine_start_paused));
579 dpavlin 2 m->start_paused = parse_on_off(cur_machine_start_paused);
580    
581     /* NOTE: Default nr of CPUs is 0: */
582     if (!cur_machine_ncpus[0])
583 dpavlin 10 strlcpy(cur_machine_ncpus, "0",
584     sizeof(cur_machine_ncpus));
585 dpavlin 2 m->ncpus = atoi(cur_machine_ncpus);
586    
587     if (cur_machine_n_gfx_cards[0])
588     m->n_gfx_cards = atoi(cur_machine_n_gfx_cards);
589    
590     if (cur_machine_serial_nr[0]) {
591     m->serial_nr = atoi(cur_machine_serial_nr);
592     e->next_serial_nr = m->serial_nr+1;
593     }
594    
595     if (cur_machine_emulated_hz[0]) {
596     m->emulated_hz = mystrtoull(cur_machine_emulated_hz,
597     NULL, 0);
598     m->automatic_clock_adjustment = 0;
599     }
600    
601     /* NOTE: Default nr of CPUs is 0: */
602     if (!cur_machine_memory[0])
603 dpavlin 10 strlcpy(cur_machine_memory, "0",
604     sizeof(cur_machine_memory));
605 dpavlin 2 m->physical_ram_in_mb = atoi(cur_machine_memory);
606    
607 dpavlin 12 if (cur_machine_max_random_cycles[0]) {
608     if (m->bintrans_enable) {
609     fprintf(stderr, "max_random_cycles doesn't"
610     " work with bintrans\n");
611     exit(1);
612     }
613     m->max_random_cycles_per_chunk = atoi(
614     cur_machine_max_random_cycles);
615     }
616    
617 dpavlin 2 if (!cur_machine_x11_scaledown[0])
618     m->x11_scaledown = 1;
619     else {
620     m->x11_scaledown = atoi(cur_machine_x11_scaledown);
621     if (m->x11_scaledown < 0) {
622 dpavlin 20 m->x11_scaleup = 0 - m->x11_scaledown;
623     m->x11_scaledown = 1;
624     }
625     if (m->x11_scaledown < 1) {
626 dpavlin 2 fprintf(stderr, "Invalid scaledown value"
627     " (%i)\n", m->x11_scaledown);
628     exit(1);
629     }
630     }
631    
632     for (i=0; i<cur_machine_n_disk; i++) {
633     diskimage_add(m, cur_machine_disk[i]);
634     free(cur_machine_disk[i]);
635     cur_machine_disk[i] = NULL;
636     }
637    
638     m->boot_kernel_filename = strdup(cur_machine_bootname);
639    
640     if (cur_machine_bootarg[0])
641     m->boot_string_argument = strdup(cur_machine_bootarg);
642    
643     for (i=0; i<cur_machine_n_x11_disp; i++) {
644     m->x11_n_display_names ++;
645     m->x11_display_names = realloc(
646     m->x11_display_names, m->x11_n_display_names
647     * sizeof(char *));
648     if (m->x11_display_names == NULL) {
649     printf("out of memory\n");
650     exit(1);
651     }
652     m->x11_display_names[m->x11_n_display_names-1] =
653     strdup(cur_machine_x11_disp[i]);
654     if (m->x11_display_names
655     [m->x11_n_display_names-1] == NULL) {
656     printf("out of memory\n");
657     exit(1);
658     }
659     free(cur_machine_x11_disp[i]);
660     cur_machine_x11_disp[i] = NULL;
661     }
662    
663     emul_machine_setup(m,
664     cur_machine_n_load, cur_machine_load,
665     cur_machine_n_device, cur_machine_device);
666    
667     for (i=0; i<cur_machine_n_device; i++) {
668     free(cur_machine_device[i]);
669     cur_machine_device[i] = NULL;
670     }
671    
672     for (i=0; i<cur_machine_n_load; i++) {
673     free(cur_machine_load[i]);
674     cur_machine_load[i] = NULL;
675     }
676    
677     *parsestate = PARSESTATE_EMUL;
678     return;
679     }
680    
681     WORD("name", cur_machine_name);
682     WORD("cpu", cur_machine_cpu);
683     WORD("type", cur_machine_type);
684     WORD("subtype", cur_machine_subtype);
685     WORD("bootname", cur_machine_bootname);
686     WORD("bootarg", cur_machine_bootarg);
687     WORD("slow_serial_interrupts_hack_for_linux", cur_machine_slowsi);
688     WORD("debugger_on_badaddr", cur_machine_debugger_on_badaddr);
689     WORD("prom_emulation", cur_machine_prom_emulation);
690     WORD("use_x11", cur_machine_use_x11);
691     WORD("x11_scaledown", cur_machine_x11_scaledown);
692     WORD("bintrans", cur_machine_bintrans);
693     WORD("old_bintrans", cur_machine_old_bintrans);
694     WORD("bintrans_size", cur_machine_bintrans_size);
695     WORD("byte_order", cur_machine_byte_order);
696     WORD("random_mem_contents", cur_machine_random_mem);
697     WORD("use_random_bootstrap_cpu", cur_machine_random_cpu);
698     WORD("force_netboot", cur_machine_force_netboot);
699     WORD("ncpus", cur_machine_ncpus);
700     WORD("serial_nr", cur_machine_serial_nr);
701     WORD("n_gfx_cards", cur_machine_n_gfx_cards);
702     WORD("emulated_hz", cur_machine_emulated_hz);
703     WORD("memory", cur_machine_memory);
704 dpavlin 12 WORD("max_random_cycles", cur_machine_max_random_cycles);
705 dpavlin 2 WORD("start_paused", cur_machine_start_paused);
706    
707     if (strcmp(word, "load") == 0) {
708     read_one_word(f, word, maxbuflen,
709     line, EXPECT_LEFT_PARENTHESIS);
710     if (cur_machine_n_load >= MAX_N_LOAD) {
711     fprintf(stderr, "too many loads\n");
712     exit(1);
713     }
714     cur_machine_load[cur_machine_n_load] = malloc(MAX_LOAD_LEN);
715     if (cur_machine_load[cur_machine_n_load] == NULL) {
716     fprintf(stderr, "out of memory\n");
717     exit(1);
718     }
719     read_one_word(f, cur_machine_load[cur_machine_n_load],
720     MAX_LOAD_LEN, line, EXPECT_WORD);
721     cur_machine_n_load ++;
722     read_one_word(f, word, maxbuflen,
723     line, EXPECT_RIGHT_PARENTHESIS);
724     return;
725     }
726    
727     if (strcmp(word, "disk") == 0) {
728     read_one_word(f, word, maxbuflen,
729     line, EXPECT_LEFT_PARENTHESIS);
730     if (cur_machine_n_disk >= MAX_N_DISK) {
731     fprintf(stderr, "too many disks\n");
732     exit(1);
733     }
734     cur_machine_disk[cur_machine_n_disk] = malloc(MAX_DISK_LEN);
735     if (cur_machine_disk[cur_machine_n_disk] == NULL) {
736     fprintf(stderr, "out of memory\n");
737     exit(1);
738     }
739     read_one_word(f, cur_machine_disk[cur_machine_n_disk],
740     MAX_DISK_LEN, line, EXPECT_WORD);
741     cur_machine_n_disk ++;
742     read_one_word(f, word, maxbuflen,
743     line, EXPECT_RIGHT_PARENTHESIS);
744     return;
745     }
746    
747     if (strcmp(word, "device") == 0) {
748     read_one_word(f, word, maxbuflen,
749     line, EXPECT_LEFT_PARENTHESIS);
750     if (cur_machine_n_device >= MAX_N_DEVICE) {
751     fprintf(stderr, "too many devices\n");
752     exit(1);
753     }
754     cur_machine_device[cur_machine_n_device] =
755     malloc(MAX_DEVICE_LEN);
756     if (cur_machine_device[cur_machine_n_device] == NULL) {
757     fprintf(stderr, "out of memory\n");
758     exit(1);
759     }
760     read_one_word(f, cur_machine_device[cur_machine_n_device],
761     MAX_DEVICE_LEN, line, EXPECT_WORD);
762     cur_machine_n_device ++;
763     read_one_word(f, word, maxbuflen,
764     line, EXPECT_RIGHT_PARENTHESIS);
765     return;
766     }
767    
768     if (strcmp(word, "add_x11_display") == 0) {
769     read_one_word(f, word, maxbuflen,
770     line, EXPECT_LEFT_PARENTHESIS);
771     if (cur_machine_n_x11_disp >= MAX_N_X11_DISP) {
772     fprintf(stderr, "too many x11 displays\n");
773     exit(1);
774     }
775     cur_machine_x11_disp[cur_machine_n_x11_disp] =
776     malloc(MAX_X11_DISP_LEN);
777     if (cur_machine_x11_disp[cur_machine_n_x11_disp] == NULL) {
778     fprintf(stderr, "out of memory\n");
779     exit(1);
780     }
781     read_one_word(f, cur_machine_x11_disp[cur_machine_n_x11_disp],
782     MAX_X11_DISP_LEN, line, EXPECT_WORD);
783     cur_machine_n_x11_disp ++;
784     read_one_word(f, word, maxbuflen,
785     line, EXPECT_RIGHT_PARENTHESIS);
786     return;
787     }
788    
789     fatal("line %i: not expecting '%s' in a 'machine' section\n",
790     *line, word);
791     exit(1);
792     }
793    
794    
795     /*
796     * emul_parse_config():
797     *
798     * Set up an emulation by parsing a config file.
799     */
800     void emul_parse_config(struct emul *e, FILE *f)
801     {
802     char word[500];
803     int in_emul = 0;
804     int line = 1;
805     int parsestate = PARSESTATE_NONE;
806    
807     /* debug("emul_parse_config()\n"); */
808    
809     while (!feof(f)) {
810     read_one_word(f, word, sizeof(word), &line,
811     EXPECT_WORD | EXPECT_RIGHT_PARENTHESIS);
812     if (!word[0])
813     break;
814    
815     /* debug("word = '%s'\n", word); */
816    
817     switch (parsestate) {
818     case PARSESTATE_NONE:
819     parse__none(e, f, &in_emul, &line, &parsestate,
820     word, sizeof(word));
821     break;
822     case PARSESTATE_EMUL:
823     parse__emul(e, f, &in_emul, &line, &parsestate,
824     word, sizeof(word));
825     break;
826     case PARSESTATE_NET:
827     parse__net(e, f, &in_emul, &line, &parsestate,
828     word, sizeof(word));
829     break;
830     case PARSESTATE_MACHINE:
831     parse__machine(e, f, &in_emul, &line, &parsestate,
832     word, sizeof(word));
833     break;
834     default:
835     fatal("INTERNAL ERROR in emul_parse.c ("
836     "parsestate %i is not imlemented yet?)\n",
837     parsestate);
838     exit(1);
839     }
840     }
841    
842     if (parsestate != PARSESTATE_NONE) {
843     fatal("EOF but not enough right parentheses?\n");
844     exit(1);
845     }
846     }
847    

  ViewVC Help
Powered by ViewVC 1.1.26