Parent Directory | Revision Log
Links to HEAD: | (view) (annotate) |
Sticky Revision: |
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1613 2007/06/15 20:11:26 debug Exp $ 20070501 Continuing a little on m88k disassembly (control registers, more instructions). Adding a dummy mvme88k machine mode. 20070502 Re-adding MIPS load/store alignment exceptions. 20070503 Implementing more of the M88K disassembly code. 20070504 Adding disassembly of some more M88K load/store instructions. Implementing some relatively simple M88K instructions (br.n, xor[.u] imm, and[.u] imm). 20070505 Implementing M88K three-register and, or, xor, and jmp[.n], bsr[.n] including function call trace stuff. Applying a patch from Bruce M. Simpson which implements the SYSCON_BOARD_CPU_CLOCK_FREQ_ID object of the syscon call in the yamon PROM emulation. 20070506 Implementing M88K bb0[.n] and bb1[.n], and skeletons for ldcr and stcr (although no control regs are implemented yet). 20070509 Found and fixed the bug which caused Linux for QEMU_MIPS to stop working in 0.4.5.1: It was a faulty change to the MIPS 'sc' and 'scd' instructions I made while going through gcc -W warnings on 20070428. 20070510 Updating the Linux/QEMU_MIPS section in guestoses.html to use mips-test-0.2.tar.gz instead of 0.1. A big thank you to Miod Vallat for sending me M88K manuals. Implementing more M88K instructions (addu, subu, div[u], mulu, ext[u], clr, set, cmp). 20070511 Fixing bugs in the M88K "and" and "and.u" instructions (found by comparing against the manual). Implementing more M88K instructions (mask[.u], mak, bcnd (auto- generated)) and some more control register details. Cleanup: Removing the experimental AVR emulation mode and corresponding devices; AVR emulation wasn't really meaningful. Implementing autogeneration of most M88K loads/stores. The rectangle drawing demo (with -O0) for M88K runs :-) Beginning on M88K exception handling. More M88K instructions: tb0, tb1, rte, sub, jsr[.n]. Adding some skeleton MVME PROM ("BUG") emulation. 20070512 Fixing a bug in the M88K cmp instruction. Adding the M88K lda (scaled register) instruction. Fixing bugs in 64-bit (32-bit pairs) M88K loads/stores. Removing the unused tick_hz stuff from the machine struct. Implementing the M88K xmem instruction. OpenBSD/mvme88k gets far enough to display the Copyright banner :-) Implementing subu.co (guess), addu.co, addu.ci, ff0, and ff1. Adding a dev_mvme187, for MVME187-specific devices/registers. OpenBSD/mvme88k prints more boot messages. :) 20070515 Continuing on MVME187 emulation (adding more devices, beginning on the CMMUs, etc). Adding the M88K and.c, xor.c, and or.c instructions, and making sure that mul, div, etc cause exceptions if executed when SFD1 is disabled. 20070517 Continuing on M88K and MVME187 emulation in general; moving the CMMU registers to the CPU struct, separating dev_pcc2 from dev_mvme187, and beginning on memory_m88k.c (BATC and PATC). Fixing a bug in 64-bit (32-bit pairs) M88K fast stores. Implementing the clock part of dev_mk48txx. Implementing the M88K fstcr and xcr instructions. Implementing m88k_cpu_tlbdump(). Beginning on the implementation of a separate address space for M88K .usr loads/stores. 20070520 Removing the non-working (skeleton) Sandpoint, SonyNEWS, SHARK Dnard, and Zaurus machine modes. Experimenting with dyntrans to_be_translated read-ahead. It seems to give a very small performance increase for MIPS emulation, but a large performance degradation for SuperH. Hm. 20070522 Disabling correct SuperH ITLB emulation; it does not seem to be necessary in order to let SH4 guest OSes run, and it slows down userspace code. Implementing "samepage" branches for SuperH emulation, and some other minor speed hacks. 20070525 Continuing on M88K memory-related stuff: exceptions, memory transaction register contents, etc. Implementing the M88K subu.ci instruction. Removing the non-working (skeleton) Iyonix machine mode. OpenBSD/mvme88k reaches userland :-), starts executing /sbin/init's instructions, and issues a few syscalls, before crashing. 20070526 Fixing bugs in dev_mk48txx, so that OpenBSD/mvme88k detects the correct time-of-day. Implementing a generic IRQ controller for the test machines (dev_irqc), similar to a proposed patch from Petr Stepan. Experimenting some more with translation read-ahead. Adding an "expect" script for automated OpenBSD/landisk install regression/performance tests. 20070527 Adding a dummy mmEye (SH3) machine mode skeleton. FINALLY found the strange M88K bug I have been hunting: I had not emulated the SNIP value for exceptions occurring in branch delay slots correctly. Implementing correct exceptions for 64-bit M88K loads/stores. Address to symbol lookups are now disabled when M88K is running in usermode (because usermode addresses don't have anything to do with supervisor addresses). 20070531 Removing the mmEye machine mode skeleton. 20070604 Some minor code cleanup. 20070605 Moving src/useremul.c into a subdir (src/useremul/), and cleaning up some more legacy constructs. Adding -Wstrict-aliasing and -fstrict-aliasing detection to the configure script. 20070606 Adding a check for broken GCC on Solaris to the configure script. (GCC 3.4.3 on Solaris cannot handle static variables which are initialized to 0 or NULL. :-/) Removing the old (non-working) ARC emulation modes: NEC RD94, R94, R96, and R98, and the last traces of Olivetti M700 and Deskstation Tyne. Removing the non-working skeleton WDSC device (dev_wdsc). 20070607 Thinking about how to use the host's cc + ld at runtime to generate native code. (See experiments/native_cc_ld_test.i for an example.) 20070608 Adding a program counter sampling timer, which could be useful for native code generation experiments. The KN02_CSR_NRMMOD bit in the DECstation 5000/200 (KN02) CSR should always be set, to allow a 5000/200 PROM to boot. 20070609 Moving out breakpoint details from the machine struct into a helper struct, and removing the limit on max nr of breakpoints. 20070610 Moving out tick functions into a helper struct as well (which also gets rid of the max limit). 20070612 FINALLY figured out why Debian/DECstation stopped working when translation read-ahead was enabled: in src/memory_rw.c, the call to invalidate_code_translation was made also if the memory access was an instruction load (if the page was mapped as writable); it shouldn't be called in that case. 20070613 Implementing some more MIPS32/64 revision 2 instructions: di, ei, ext, dext, dextm, dextu, and ins. 20070614 Implementing an instruction combination for the NetBSD/arm idle loop (making the host not use any cpu if NetBSD/arm inside the emulator is not using any cpu). Increasing the nr of ARM VPH entries from 128 to 384. 20070615 Removing the ENABLE_arch stuff from the configure script, so that all included architectures are included in both release and development builds. Moving memory related helper functions from misc.c to memory.c. Adding preliminary instructions for netbooting NetBSD/pmppc to guestoses.html; it doesn't work yet, there are weird timeouts. Beginning a total rewrite of the userland emulation modes (removing all emulation modes, beginning from scratch with NetBSD/MIPS and FreeBSD/Alpha only). 20070616 After fixing a bug in the DEC21143 NIC (the TDSTAT_OWN bit was only cleared for the last segment when transmitting, not all segments), NetBSD/pmppc boots with root-on-nfs without the timeouts. Updating guestoses.html. Removing the skeleton PSP (Playstation Portable) mode. Moving X11-related stuff in the machine struct into a helper struct. Cleanup of out-of-memory checks, to use a new CHECK_ALLOCATION macro (which prints a meaningful error message). Adding a COMMENT to each machine and device (for automagic .index comment generation). Doing regression testing for the next release. ============== RELEASE 0.4.6 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1480 2007/02/19 01:34:42 debug Exp $ 20061029 Changing usleep(1) calls in the debugger to usleep(10000) 20061107 Adding a new disk image option (-d o...) which sets the ISO9660 filesystem base offset; also making some other hacks to allow NetBSD/dreamcast and homebrew demos/games to boot directly from a filesystem image. Moving Dreamcast-specific stuff in the documentation to its own page (dreamcast.html). Adding a border to the Dreamcast PVR framebuffer. 20061108 Adding a -T command line option (again?), for halting the emulator on unimplemented memory accesses. 20061109 Continuing on various SH4 and Dreamcast related things. The emulator should now halt on more unimplemented device accesses, instead of just printing a warning, forcing me to actually implement missing stuff :) 20061111 Continuing on SH4 and Dreamcast stuff. Adding a bogus Landisk (SH4) machine mode. 20061112 Implementing some parts of the Dreamcast GDROM device. With some ugly hacks, NetBSD can (barely) mount an ISO image. 20061113 NetBSD/dreamcast now starts booting from the Live CD image, but crashes randomly quite early on in the boot process. 20061122 Beginning on a skeleton interrupt.h and interrupt.c for the new interrupt subsystem. 20061124 Continuing on the new interrupt system; taking the first steps to attempt to connect CPUs (SuperH and MIPS) and devices (dev_cons and SH4 timer interrupts) to it. Many things will probably break from now on. 20061125 Converting dev_ns16550, dev_8253 to the new interrupt system. Attempting to begin to convert the ISA bus. 20061130 Incorporating a patch from Brian Foley for the configure script, which checks for X11 libs in /usr/X11R6/lib64 (which is used on some Linux systems). 20061227 Adding a note in the man page about booting from Dreamcast CDROM images (i.e. that no external kernel is needed). 20061229 Continuing on the interrupt system rewrite: beginning to convert more devices, adding abort() calls for legacy interrupt system calls so that everything now _has_ to be rewritten! Almost all machine modes are now completely broken. 20061230 More progress on removing old interrupt code, mostly related to the ISA bus + devices, the LCA bus (on AlphaBook1), and the Footbridge bus (for CATS). And some minor PCI stuff. Connecting the ARM cpu to the new interrupt system. The CATS, NetWinder, and QEMU_MIPS machine modes now work with the new interrupt system :) 20061231 Connecting PowerPC CPUs to the new interrupt system. Making PReP machines (IBM 6050) work again. Beginning to convert the GT PCI controller (for e.g. Malta and Cobalt emulation). Some things work, but not everything. Updating Copyright notices for 2007. 20070101 Converting dev_kn02 from legacy style to devinit; the 3max machine mode now works with the new interrupt system :-] 20070105 Beginning to convert the SGI O2 machine to the new interrupt system; finally converting O2 (IP32) devices to devinit, etc. 20070106 Continuing on the interrupt system redesign/rewrite; KN01 (PMAX), KN230, and Dreamcast ASIC interrupts should work again, moving out stuff from machine.h and devices.h into the corresponding devices, beginning the rewrite of i80321 interrupts, etc. 20070107 Beginning on the rewrite of Eagle interrupt stuff (PReP, etc). 20070117 Beginning the rewrite of Algor (V3) interrupts (finally changing dev_v3 into devinit style). 20070118 Removing the "bus" registry concept from machine.h, because it was practically meaningless. Continuing on the rewrite of Algor V3 ISA interrupts. 20070121 More work on Algor interrupts; they are now working again, well enough to run NetBSD/algor. :-) 20070122 Converting VR41xx (HPCmips) interrupts. NetBSD/hpcmips can be installed using the new interrupt system :-) 20070123 Making the testmips mode work with the new interrupt system. 20070127 Beginning to convert DEC5800 devices to devinit, and to the new interrupt system. Converting Playstation 2 devices to devinit, and converting the interrupt system. Also fixing a severe bug: the interrupt mask register on Playstation 2 is bitwise _toggled_ on writes. 20070128 Removing the dummy NetGear machine mode and the 8250 device (which was only used by the NetGear machine). Beginning to convert the MacPPC GC (Grand Central) interrupt controller to the new interrupt system. Converting Jazz interrupts (PICA61 etc.) to the new interrupt system. NetBSD/arc can be installed again :-) Fixing the JAZZ timer (hardcoding it at 100 Hz, works with NetBSD and it is better than a completely dummy timer as it was before). Converting dev_mp to the new interrupt system, although I haven't had time to actually test it yet. Completely removing src/machines/interrupts.c, cpu_interrupt and cpu_interrupt_ack in src/cpu.c, and src/include/machine_interrupts.h! Adding fatal error messages + abort() in the few places that are left to fix. Converting dev_z8530 to the new interrupt system. FINALLY removing the md_int struct completely from the machine struct. SH4 fixes (adding a PADDR invalidation in the ITLB replacement code in memory_sh.c); the NetBSD/dreamcast LiveCD now runs all the way to the login prompt, and can be interacted with :-) Converting the CPC700 controller (PCI and interrupt controller for PM/PPC) to the new interrupt system. 20070129 Fixing MACE ISA interrupts (SGI IP32 emulation). Both NetBSD/ sgimips' and OpenBSD/sgi's ramdisk kernels can now be interacted with again. 20070130 Moving out the MIPS multi_lw and _sw instruction combinations so that they are auto-generated at compile time instead. 20070131 Adding detection of amd64/x86_64 hosts in the configure script, for doing initial experiments (again :-) with native code generation. Adding a -k command line option to set the size of the dyntrans cache, and a -B command line option to disable native code generation, even if GXemul was compiled with support for native code generation for the specific host CPU architecture. 20070201 Experimenting with a skeleton for native code generation. Changing the default behaviour, so that native code generation is now disabled by default, and has to be enabled by using -b on the command line. 20070202 Continuing the native code generation experiments. Making PCI interrupts work for Footbridge again. 20070203 More native code generation experiments. Removing most of the native code generation experimental code, it does not make sense to include any quick hacks like this. Minor cleanup/removal of some more legacy MIPS interrupt code. 20070204 Making i80321 interrupts work again (for NetBSD/evbarm etc.), and fixing the timer at 100 Hz. 20070206 Experimenting with removing the wdc interrupt slowness hack. 20070207 Lowering the number of dyntrans TLB entries for MIPS from 192 to 128, resulting in a minor speed improvement. Minor optimization to the code invalidation routine in cpu_dyntrans.c. 20070208 Increasing (experimentally) the nr of dyntrans instructions per loop from 60 to 120. 20070210 Commenting out (experimentally) the dyntrans_device_danger detection in memory_rw.c. Changing the testmips and baremips machines to use a revision 2 MIPS64 CPU by default, instead of revision 1. Removing the dummy i960, IA64, x86, AVR32, and HP PA-RISC files, the PC bios emulation, and the Olivetti M700 (ARC) and db64360 emulation modes. 20070211 Adding an "mp" demo to the demos directory, which tests the SMP functionality of the testmips machine. Fixing PReP interrupts some more. NetBSD/prep now boots again. 20070216 Adding a "nop workaround" for booting Mach/PMAX to the documentation; thanks to Artur Bujdoso for the values. Converting more of the MacPPC interrupt stuff to the new system. Beginning to convert BeBox interrupts to the new system. PPC603e should NOT have the PPC_NO_DEC flag! Removing it. Correcting BeBox clock speed (it was set to 100 in the NetBSD bootinfo block, but should be 33000000/4), allowing NetBSD to start without using the (incorrect) PPC_NO_DEC hack. 20070217 Implementing (slow) AltiVec vector loads and stores, allowing NetBSD/macppc to finally boot using the GENERIC kernel :-) Updating the documentation with install instructions for NetBSD/macppc. 20070218-19 Regression testing for the release. ============== RELEASE 0.4.4 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1121 2006/02/18 21:03:08 debug Exp $ 20051126 Cobalt and PReP now work with the 21143 NIC. Continuing on Alpha dyntrans things. Fixing some more left-shift-by-24 to unsigned. 20051127 Working on OpenFirmware emulation; major cleanup/redesign. Progress on MacPPC emulation: NetBSD detects two CPUs (when running with -n 2), framebuffer output (for text) works. Adding quick-hack Bandit PCI controller and "gc" interrupt controller for MacPPC. 20051128 Changing from a Bandit to a Uni-North controller for macppc. Continuing on OpenFirmware and MacPPC emulation in general (obio controller, and wdc attached to the obio seems to work). 20051129 More work on MacPPC emulation (adding a dummy ADB controller). Continuing the PCI bus cleanup (endianness and tag composition) and rewriting all PCI controllers' access functions. 20051130 Various minor PPC dyntrans optimizations. Manually inlining some parts of the framebuffer redraw routine. Slowly beginning the conversion of the old MIPS emulation into dyntrans (but this will take quite some time to get right). Generalizing quick_pc_to_pointers. 20051201 Documentation update (David Muse has made available a kernel which simplifies Debian/DECstation installation). Continuing on the ADB bus controller. 20051202 Beginning a rewrite of the Zilog serial controller (dev_zs). 20051203 Continuing on the zs rewrite (now called dev_z8530); conversion to devinit style. Reworking some of the input-only vs output-only vs input-output details of src/console.c, better warning messages, and adding a debug dump. Removing the concept of "device state"; it wasn't really used. Changing some debug output (-vv should now be used to show all details about devices and busses; not shown during normal startup anymore). Beginning on some SPARC instruction disassembly support. 20051204 Minor PPC updates (WALNUT skeleton stuff). Continuing on the MIPS dyntrans rewrite. More progress on the ADB controller (a keyboard is "detected" by NetBSD and OpenBSD). Downgrading OpenBSD/arc as a guest OS from "working" to "almost working" in the documentation. Progress on Algor emulation ("v3" PCI controller). 20051205 Minor updates. 20051207 Sorting devices according to address; this reduces complexity of device lookups from O(n) to O(log n) in memory_rw (but no real performance increase (yet) in experiments). 20051210 Beginning the work on native dyntrans backends (by making a simple skeleton; so far only for Alpha hosts). 20051211 Some very minor SPARC updates. 20051215 Fixing a bug in the MIPS mul (note: not mult) instruction, so it also works with non-64-bit emulation. (Thanks to Alec Voropay for noticing the problem.) 20051216 More work on the fake/empty/simple/skeleton/whatever backend; performance doesn't increase, so this isn't really worth it, but it was probably worth it to prepare for a real backend later. 20051219 More instr call statistics gathering and analysis stuff. 20051220 Another fix for MIPS 'mul'. Also converting mul and {d,}cl{o,z} to dyntrans. memory_ppc.c syntax error fix (noticed by Peter Valchev). Beginning to move out machines from src/machine.c into individual files in src/machines (in a way similar to the autodev system for devices). 20051222 Updating the documentation regarding NetBSD/pmax 3.0. 20051223 - " - NetBSD/cats 3.0. 20051225 - " - NetBSD/hpcmips 3.0. 20051226 Continuing on the machine registry redesign. Adding support for ARM rrx (33-bit rotate). Fixing some signed/unsigned issues (exposed by gcc -W). 20051227 Fixing the bug which prevented a NetBSD/prep 3.0 install kernel from starting (triggered when an mtmsr was the last instruction on a page). Unfortunately not enough to get the kernel to run as well as the 2.1 kernels did. 20051230 Some dyntrans refactoring. 20051231 Continuing on the machine registry redesign. 20060101-10 Continuing... moving more machines. Moving MD interrupt stuff from machine.c into a new src/machines/interrupts.c. 20060114 Adding various mvmeppc machine skeletons. 20060115 Continuing on mvme* stuff. NetBSD/mvmeppc prints boot messages (for MVME1600) and reaches the root device prompt, but no specific hardware devices are emulated yet. 20060116 Minor updates to the mvme1600 emulation mode; the Eagle PCI bus seems to work without much modification, and a 21143 can be detected, interrupts might work (but untested so far). Adding a fake MK48Txx (mkclock) device, for NetBSD/mvmeppc. 20060121 Adding an aux control register for ARM. (A BIG thank you to Olivier Houchard for tracking down this bug.) 20060122 Adding more ARM instructions (smulXY), and dev_iq80321_7seg. 20060124 Adding disassembly of more ARM instructions (mia*, mra/mar), and some semi-bogus XScale and i80321 registers. 20060201-02 Various minor updates. Moving the last machines out of machine.c. 20060204 Adding a -c command line option, for running debugger commands before the simulation starts, but after all files have been loaded. Minor iq80321-related updates. 20060209 Minor hacks (DEVINIT macro, etc). Preparing for the generalization of the 64-bit dyntrans address translation subsystem. 20060216 Adding ARM ldrd (double-register load). 20060217 Continuing on various ARM-related stuff. 20060218 More progress on the ATA/wdc emulation for NetBSD/iq80321. NetBSD/evbarm can now be installed :-) Updating the docs, etc. Continuing on Algor emulation. ============== RELEASE 0.3.8 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1055 2005/11/25 22:48:36 debug Exp $ 20051031 Adding disassembly support for more ARM instructions (clz, smul* etc), and adding a hack to support "new tiny" pages for StrongARM. 20051101 Minor documentation updates (NetBSD 2.0.2 -> 2.1, and OpenBSD 3.7 -> 3.8, and lots of testing). Changing from 1-sector PIO mode 0 transfers to 128-sector PIO mode 3 (in dev_wdc). Various minor ARM dyntrans updates (pc-relative loads from within the same page as the instruction are now treated as constant "mov"). 20051102 Re-enabling instruction combinations (they were accidentally disabled). Dyntrans TLB entries are now overwritten using a round-robin scheme instead of randomly. This increases performance. Fixing a typo in file.c (thanks to Chuan-Hua Chang for noticing it). Experimenting with adding ATAPI support to dev_wdc (to make emulated *BSD detect cdroms as cdroms, not harddisks). 20051104 Various minor updates. 20051105 Continuing on the ATAPI emulation. Seems to work well enough for a NetBSD/cats installation, but not OpenBSD/cats. Various other updates. 20051106 Modifying the -Y command line option to allow scaleup with certain graphic controllers (only dev_vga so far), not just scaledown. Some minor dyntrans cleanups. 20051107 Beginning a cleanup up the PCI subsystem (removing the read_register hack, etc). 20051108 Continuing the cleanup; splitting up some pci devices into a normal autodev device and some separate pci glue code. 20051109 Continuing on the PCI bus stuff; all old pci_*.c have been incorporated into normal devices and/or rewritten as glue code only, adding a dummy Intel 82371AB PIIX4 for Malta (not really tested yet). Minor pckbc fix so that Linux doesn't complain. Working on the DEC 21143 NIC (ethernet mac rom stuff mostly). Various other minor fixes. 20051110 Some more ARM dyntrans fine-tuning (e.g. some instruction combinations (cmps followed by conditional branch within the same page) and special cases for DPIs with regform when the shifter isn't used). 20051111 ARM dyntrans updates: O(n)->O(1) for just-mark-as-non- writable in the generic pc_to_pointers function, and some other minor hacks. Merging Cobalt and evbmips (Malta) ISA interrupt handling, and some minor fixes to allow Linux to accept harddisk irqs. 20051112 Minor device updates (pckbc, dec21143, lpt, ...), most importantly fixing the ALI M1543/M5229 so that harddisk irqs work with Linux/CATS. 20051113 Some more generalizations of the PCI subsystem. Finally took the time to add a hack for SCSI CDROM TOCs; this enables OpenBSD to use partition 'a' (as needed by the OpenBSD installer), and Windows NT's installer to get a bit further. Also fixing dev_wdc to allow Linux to detect ATAPI CDROMs. Continuing on the DEC 21143. 20051114 Minor ARM dyntrans tweaks; ARM cmps+branch optimization when comparing with 0, and generalizing the xchg instr. comb. Adding disassembly of ARM mrrc/mcrr and q{,d}{add,sub}. 20051115 Continuing on various PPC things (BATs, other address trans- lation things, various loads/stores, BeBox emulation, etc.). Beginning to work on PPC interrupt/exception support. 20051116 Factoring out some code which initializes legacy ISA devices from those machines that use them (bus_isa). Continuing on PPC interrupt/exception support. 20051117 Minor Malta fixes: RTC year offset = 80, disabling a speed hack which caused NetBSD to detect a too fast cpu, and adding a new hack to make Linux detect a faster cpu. Continuing on the Artesyn PM/PPC emulation mode. Adding an Algor emulation skeleton (P4032 and P5064); implementing some of the basics. Continuing on PPC emulation in general; usage of unimplemented SPRs is now easier to track, continuing on memory/exception related issues, etc. 20051118 More work on PPC emulation (tgpr0..3, exception handling, memory stuff, syscalls, etc.). 20051119 Changing the ARM dyntrans code to mostly use cpu->pc, and not necessarily use arm reg 15. Seems to work. Various PPC updates; continuing on the PReP emulation mode. 20051120 Adding a workaround/hack to dev_mc146818 to allow NetBSD/prep to detect the clock. 20051121 More cleanup of the PCI bus (memory and I/O bases, etc). Continuing on various PPC things (decrementer and timebase, WDCs on obio (on PReP) use irq 13, not 14/15). 20051122 Continuing on the CPC700 controller (interrupts etc) for PMPPC, and on PPC stuff in general. Finally! After some bug fixes to the virtual to physical addr translation, NetBSD/{prep,pmppc} 2.1 reach userland and are stable enough to be interacted with. More PCI updates; reverse-endian device access for PowerPC etc. 20051123 Generalizing the IEEE floating point subsystem (moving it out from src/cpus/cpu_mips_coproc.c into a new src/float_emul.c). Input via slave xterms was sometimes not really working; fixing this for ns16550, and a warning message is now displayed if multiple non-xterm consoles are active. Adding some PPC floating point support, etc. Various interrupt related updates (dev_wdc, _ns16550, _8259, and the isa32 common code in machine.c). NetBSD/prep can now be installed! :-) (Well, with some manual commands necessary before running sysinst.) Updating the documentation and various other things to reflect this. 20051124 Various minor documentation updates. Continuing the work on the DEC 21143 NIC. 20051125 LOTS of work on the 21143. Both OpenBSD and NetBSD work fine with it now, except that OpenBSD sometimes gives a time-out warning. Minor documentation updates. ============== RELEASE 0.3.7 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.707 2005/04/27 16:37:33 debug Exp $ 20050408 Some minor updates to the wdc. Linux now doesn't complain anymore if a disk is non-present. 20050409 Various minor fixes (a bintrans bug, and some other things). The wdc seems to work with Playstation2 emulation, but there is a _long_ annoying delay when disks are detected. Fixing a really important bintrans bug (when devices and RAM are mixed within 4KB pages), which was triggered with NetBSD/playstation2 kernels. 20050410 Adding a dummy dev_ps2_ether (just so that NetBSD doesn't complain as much during bootup). Symbols starting with '$' are now ignored. Renaming dev_ps2_ohci.c to dev_ohci.c, etc. 20050411 Moving the bintrans-cache-isolation check from cpu_mips.c to cpu_mips_coproc.c. (I thought this would give a speedup, but it's not noticable.) Better playstation2 sbus interrupt code. Skip ahead many ticks if the count register is read manually. (This increases the speed of delay-loops that simply read the count register.) 20050412 Updates to the playstation2 timer/interrupt code. Some other minor updates. 20050413 NetBSD/cobalt runs from a disk image :-) including userland; updating the documentation on how to install NetBSD/cobalt using NetBSD/pmax (!). Some minor bintrans updates (no real speed improvement) and other minor updates (playstation2 now uses the -o options). 20050414 Adding a dummy x86 (and AMD64) mode. 20050415 Adding some (32-bit and 16-bit) x86 instructions. Adding some initial support for non-SCSI, non-IDE floppy images. (The x86 mode can boot from these, more or less.) Moving the devices/ and include/ directories to src/devices/ and src/include/, respectively. 20050416 Continuing on the x86 stuff. (Adding pc_bios.c and some simple support for software interrupts in 16-bit mode.) 20050417 Ripping out most of the x86 instruction decoding stuff, trying to rewrite it in a cleaner way. Disabling some of the least working CPU families in the configure script (sparc, x86, alpha, hppa), so that they are not enabled by default. 20050418 Trying to fix the bug which caused problems when turning on and off bintrans interactively, by flushing the bintrans cache whenever bintrans is manually (re)enabled. 20050419 Adding the 'lswi' ppc instruction. Minor updates to the x86 instruction decoding. 20050420 Renaming x86 register name indices from R_xx to X86_R_xx (this makes building on Tru64 nicer). 20050422 Adding a check for duplicate MIPS TLB entries on tlbwr/tlbwi. 20050427 Adding screenshots to guestoses.html. Some minor fixes and testing for the next release. ============== RELEASE 0.3.2 ==============
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.26 |