Parent Directory | Revision Log
Links to HEAD: | (view) (annotate) |
Sticky Revision: |
++ trunk/HISTORY (local) $Id: HISTORY,v 1.905 2005/08/16 09:16:24 debug Exp $ 20050628 Continuing the work on the ARM translation engine. end_of_page works. Experimenting with load/store translation caches (virtual -> physical -> host). 20050629 More ARM stuff (memory access translation cache, mostly). This might break a lot of stuff elsewhere, probably some MIPS- related translation things. 20050630 Many load/stores are now automatically generated and included into cpu_arm_instr.c; 1024 functions in total (!). Fixes based on feedback from Alec Voropay: only print 8 hex digits instead of 16 in some cases when emulating 32-bit machines; similar 8 vs 16 digit fix for breakpoint addresses; 4Kc has 16 TLB entries, not 48; the MIPS config select1 register is now printed with "reg ,0". Also changing many other occurances of 16 vs 8 digit output. Adding cache associativity fields to mips_cpu_types.h; updating some other cache fields; making the output of mips_cpu_dumpinfo() look nicer. Generalizing the bintrans stuff for device accesses to also work with the new translation system. (This might also break some MIPS things.) Adding multi-load/store instructions to the ARM disassembler and the translator, and some optimizations of various kinds. 20050701 Adding a simple dev_disk (it can read/write sectors from disk images). 20050712 Adding dev_ether (a simple ethernet send/receive device). Debugger command "ninstrs" for toggling show_nr_of_instructions during runtime. Removing the framebuffer logo. 20050713 Continuing on dev_ether. Adding a dummy cpu_alpha (again). 20050714 More work on cpu_alpha. 20050715 More work on cpu_alpha. Many instructions work, enough to run a simple framebuffer fill test (similar to the ARM test). 20050716 More Alpha stuff. 20050717 Minor updates (Alpha stuff). 20050718 Minor updates (Alpha stuff). 20050719 Generalizing some Alpha instructions. 20050720 More Alpha-related updates. 20050721 Continuing on cpu_alpha. Importing rpb.h from NetBSD/alpha. 20050722 Alpha-related updates: userland stuff (Hello World using write() compiled statically for FreeBSD/Alpha runs fine), and more instructions are now implemented. 20050723 Fixing ldq_u and stq_u. Adding more instructions (conditional moves, masks, extracts, shifts). 20050724 More FreeBSD/Alpha userland stuff, and adding some more instructions (inserts). 20050725 Continuing on the Alpha stuff. (Adding dummy ldt/stt.) Adding a -A command line option to turn off alignment checks in some cases (for translated code). Trying to remove the old bintrans code which updated the pc and nr_of_executed_instructions for every instruction. 20050726 Making another attempt att removing the pc/nr of instructions code. This time it worked, huge performance increase for artificial test code, but performance loss for real-world code :-( so I'm scrapping that code for now. Tiny performance increase on Alpha (by using ret instead of jmp, to play nice with the Alpha's branch prediction) for the old MIPS bintrans backend. 20050727 Various minor fixes and cleanups. 20050728 Switching from a 2-level virtual to host/physical translation system for ARM emulation, to a 1-level translation. Trying to switch from 2-level to 1-level for the MIPS bintrans system as well (Alpha only, so far), but there is at least one problem: caches and/or how they work with device mappings. 20050730 Doing the 2-level to 1-level conversion for the i386 backend. The cache/device bug is still there for R2K/3K :( Various other minor updates (Malta etc). The mc146818 clock now updates the UIP bit in a way which works better with Linux for at least sgimips and Malta emulation. Beginning the work on refactoring the dyntrans system. 20050731 Continuing the dyntrans refactoring. Fixing a small but serious host alignment bug in memory_rw. Adding support for big-endian load/stores to the i386 bintrans backend. Another minor i386 bintrans backend update: stores from the zero register are now one (or two) loads shorter. The slt and sltu instructions were incorrectly implemented for the i386 backend; only using them for 32-bit mode for now. 20050801 Continuing the dyntrans refactoring. Cleanup of the ns16550 serial controller (removing unnecessary code). Bugfix (memory corruption bug) in dev_gt, and a patch/hack from Alec Voropay for Linux/Malta. 20050802 More cleanup/refactoring of the dyntrans subsystem: adding phys_page pointers to the lookup tables, for quick jumps between translated pages. Better fix for the ns16550 device (but still no real FIFO functionality). Converting cpu_ppc to the new dyntrans system. This means that I will have to start from scratch with implementing each instruction, and figure out how to implement dual 64/32-bit modes etc. Removing the URISC CPU family, because it was useless. 20050803 When selecting a machine type, the main type can now be omitted if the subtype name is unique. (I.e. -E can be omitted.) Fixing a dyntrans/device update bug. (Writes to offset 0 of a device could sometimes go unnoticed.) Adding an experimental "instruction combination" hack for ARM for memset-like byte fill loops. 20050804 Minor progress on cpu_alpha and related things. Finally fixing the MIPS dmult/dmultu bugs. Fixing some minor TODOs. 20050805 Generalizing the 8259 PIC. It now also works with Cobalt and evbmips emulation, in addition to the x86 hack. Finally converting the ns16550 device to use devinit. Continuing the work on the dyntrans system. Thinking about how to add breakpoints. 20050806 More dyntrans updates. Breakpoints seem to work now. 20050807 Minor updates: cpu_alpha and related things; removing dev_malta (as it isn't used any more). Dyntrans: working on general "show trace tree" support. The trace tree stuff now works with both the old MIPS code and with newer dyntrans modes. :) Continuing on Alpha-related stuff (trying to get *BSD to boot a bit further, adding more instructions, etc). 20050808 Adding a dummy IA64 cpu family, and continuing the refactoring of the dyntrans system. Removing the regression test stuff, because it was more or less useless. Adding loadlinked/storeconditional type instructions to the Alpha emulation. (Needed for Linux/alpha. Not very well tested yet.) 20050809 The function call trace tree now prints a per-function nr of arguments. (Semi-meaningless, since that data isn't read yet from the ELFs; some hardcoded symbols such as memcpy() and strlen() work fine, though.) More dyntrans refactoring; taking out more of the things that are common to all cpu families. 20050810 Working on adding support for "dual mode" for PPC dyntrans (i.e. both 64-bit and 32-bit modes). (Re)adding some simple PPC instructions. 20050811 Adding a dummy M68K cpu family. The dyntrans system isn't ready for variable-length ISAs yet, so it's completely bogus so far. Re-adding more PPC instructions. Adding a hack to src/file.c which allows OpenBSD/mac68k a.out kernels to be loaded. Beginning to add PPC loads/stores. So far they only work in 32-bit mode. 20050812 The configure file option "add_remote" now accepts symbolic host names, in addition to numeric IPv4 addresses. Re-adding more PPC instructions. 20050814 Continuing to port back more PPC instructions. Found and fixed the cache/device write-update bug for 32-bit MIPS bintrans. :-) Triggered a really weird and annoying bug in Compaq's C compiler; ccc sometimes outputs code which loads from an address _before_ checking whether the pointer was NULL or not. (I'm not sure how to handle this problem.) 20050815 Removing all of the old x86 instruction execution code; adding a new (dummy) dyntrans module for x86. Taking the first steps to extend the dyntrans system to support variable-length instructions. Slowly preparing for the next release. 20050816 Adding a dummy SPARC cpu module. Minor updates (documentation etc) for the release. ============== RELEASE 0.3.5 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.815 2005/06/27 23:04:35 debug Exp $ 20050617 Experimenting some more with netbooting OpenBSD/sgi. Adding a hack which allows emulated ethernet networks to be distributed across multiple emulator processes. 20050618 Minor updates (documentation, dummy YAMON emulation, etc). 20050620 strcpy/strcat -> strlcpy/strlcat updates. Some more progress on evbmips (Malta). 20050621 Adding a section to doc/configfiles.html about ethernet emulation across multiple hosts. Beginning the work on the ARM translation engine (using the dynamic-but-not-binary translation method). Fixing a bintrans bug: 0x9fc00000 should always be treated as PROM area, just as 0xbfc00000 is. Minor progress on Malta emulation (the PCI-ISA bus). 20050622 NetBSD/evbmips can now be installed (using another emulated machine) and run (including userland and so on). :-) Spliting up the bintrans haddr_entry field into two (one for read, one for write). Probably not much of a speed increase, though. Updating some NetBSD 2.0 -> 2.0.2 in the documentation. 20050623 Minor updates (documentation, the TODO file, etc). gzipped kernels are now always automagically gunzipped when loaded. 20050624 Adding a dummy Playstation Portable (PSP) mode, just barely enough to run Hello World (in weird colors :-). Removing the -b command line option; old bintrans is enabled by default instead. It makes more sense. Trying to finally fix the non-working performance measurement thing (instr/second etc). 20050625 Continuing on the essential basics for ARM emulation. Two instructions seem to work, a branch and a simple "mov". (The mov arguments are not correct yet.) Performance is definitely reasonable. Various other minor updates. Adding the ARM "bl" instruction. Adding support for combining multiple ARM instructions into one function call. ("mov" + "mov" is the only one implemented so far, but it seems to work.) Cleaning up some IP32 interrupt things (crime/mace); disabling the PS/2 keyboard controller on IP32, so that NetBSD/sgimips boots into userland again. 20050626 Finally! NetBSD/sgimips netboots. Adding instructions to doc/guestoses.html on how to set up an nfs server etc. Various other minor fixes. Playstation Portable ".pbp" files can now be used directly. (The ELF part of the .pbp is extracted transparently.) Converting some sprintf -> snprintf. Adding some more instructions to the ARM disassembler. 20050627 More ARM updates. Adding some simple ldr(b), str(b), cmps, and conditional branch instructions, enough to run a simple Hello World program. All ARM instructions are now inlined/generated for all possible condition codes. Adding add and sub, and more load/store instructions. Removing dummy files: cpu_alpha.c, cpu_hppa.c, and cpu_sparc.c. Some minor documentation updates; preparing for a 0.3.4 release. Updating some URLs. ============== RELEASE 0.3.4 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.707 2005/04/27 16:37:33 debug Exp $ 20050408 Some minor updates to the wdc. Linux now doesn't complain anymore if a disk is non-present. 20050409 Various minor fixes (a bintrans bug, and some other things). The wdc seems to work with Playstation2 emulation, but there is a _long_ annoying delay when disks are detected. Fixing a really important bintrans bug (when devices and RAM are mixed within 4KB pages), which was triggered with NetBSD/playstation2 kernels. 20050410 Adding a dummy dev_ps2_ether (just so that NetBSD doesn't complain as much during bootup). Symbols starting with '$' are now ignored. Renaming dev_ps2_ohci.c to dev_ohci.c, etc. 20050411 Moving the bintrans-cache-isolation check from cpu_mips.c to cpu_mips_coproc.c. (I thought this would give a speedup, but it's not noticable.) Better playstation2 sbus interrupt code. Skip ahead many ticks if the count register is read manually. (This increases the speed of delay-loops that simply read the count register.) 20050412 Updates to the playstation2 timer/interrupt code. Some other minor updates. 20050413 NetBSD/cobalt runs from a disk image :-) including userland; updating the documentation on how to install NetBSD/cobalt using NetBSD/pmax (!). Some minor bintrans updates (no real speed improvement) and other minor updates (playstation2 now uses the -o options). 20050414 Adding a dummy x86 (and AMD64) mode. 20050415 Adding some (32-bit and 16-bit) x86 instructions. Adding some initial support for non-SCSI, non-IDE floppy images. (The x86 mode can boot from these, more or less.) Moving the devices/ and include/ directories to src/devices/ and src/include/, respectively. 20050416 Continuing on the x86 stuff. (Adding pc_bios.c and some simple support for software interrupts in 16-bit mode.) 20050417 Ripping out most of the x86 instruction decoding stuff, trying to rewrite it in a cleaner way. Disabling some of the least working CPU families in the configure script (sparc, x86, alpha, hppa), so that they are not enabled by default. 20050418 Trying to fix the bug which caused problems when turning on and off bintrans interactively, by flushing the bintrans cache whenever bintrans is manually (re)enabled. 20050419 Adding the 'lswi' ppc instruction. Minor updates to the x86 instruction decoding. 20050420 Renaming x86 register name indices from R_xx to X86_R_xx (this makes building on Tru64 nicer). 20050422 Adding a check for duplicate MIPS TLB entries on tlbwr/tlbwi. 20050427 Adding screenshots to guestoses.html. Some minor fixes and testing for the next release. ============== RELEASE 0.3.2 ==============
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.26 |