Parent Directory | Revision Log
Links to HEAD: | (view) (annotate) |
Sticky Revision: |
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1539 2007/05/01 04:03:51 debug Exp $ 20070415 Landisk PCLOCK should be 33.33 MHz, not 50 MHz. (This makes the clock run at correct speed.) FINALLY found and fixed the bug which caused OpenBSD/landisk to randomly bug out: an &-sign was missing in the special case handling of FPSCR in the 'LDS.L @Rm+,FPSCR' instruction. Adding similar special case handling for 'LDC.L @Rm+,SR' (calling sh_update_sr() instead of just loading). Implementing the 'FCNVSD FPUL,DRn' and 'FCNVDS DRm,FPUL' SuperH instructions. The 'LDC Rm,SR' instruction now immediately breaks out of the dyntrans loop if an interrupt is to be triggered. 20070416 In memory_rw.c, if mapping a page as writable, make sure to invalidate code translations even if the data access was a read. Minor SuperH updates. 20070418 Removing the dummy M68K emulation mode. Minor SH update (turning unnecessary sts_mach_rn, sts_macl_rn, and sts_pr_rn instruction handlers into mov_rm_rn). 20070419 Beginning to add a skeleton for an M88K mode: Adding a hack to allow OpenBSD/m88k a.out binaries to be loaded, and disassembly of a few simple 88K instructions. Commenting out the 'LDC Rm,SR' fix from a few days ago, because it made Linux/dreamcast bug out. Adding a hack to dev_sh4.c (an extra translation cache invalidation), which allows OpenBSD/landisk to boot ok after an install. Upgrading the Landisk machine mode to stable, updating documentation, etc. 20070420 Experimenting with adding a PCI controller (pcic) to dev_sh4. Adding a dummy Realtek 8139C+ skeleton device (dev_rtl8139c). Implementing the first M88K instructions (br, or[.u] imm), and adding disassembly of some more instructions. 20070421 Continuing a little on dev_rtl8139c. 20070422 Implementing the 9346 EEPROM "read" command for dev_rtl8139c. Finally found and fixed an old bug in the log n symbol search (it sometimes missed symbols). Debug trace (-i, -t etc) should now show more symbols. :-) 20070423 Continuing a little on M88K disassembly. 20070428 Fixing a memset arg order bug in src/net/net.c (thanks to Nigel Horne for noticing the bug). Applying parts of a patch from Carl van Schaik to clear out bottom bits of MIPS addresses more correctly, when using large page sizes, and doing some other minor cleanup/refactoring. Fixing a couple of warnings given by gcc with the -W option (a few more warnings than just plain -Wall). Reducing SuperH dyntrans physical address space from 64-bit to 32-bit (since SH5/SH64 isn't imlemented yet anyway). Adding address-to-symbol annotation to a few more instructions in the SuperH instruction trace output. Beginning regression testing for the next release. Reverting the value of SCIF_DELAYED_TX_VALUE from 1 to 2, because OpenBSD/landisk may otherwise hang randomly. 20070429 The ugly hack/workaround to get OpenBSD/landisk booting without crashing does NOT work anymore (with the April 21 snapshot of OpenBSD/landisk). Strangely enough, removing the hack completely causes OpenBSD/landisk to work (!). More regression testing (re-testing everything SuperH-related, and some other things). Cobalt interrupts were actually broken; fixing by commenting out the DEC21143s in the Cobalt machine. 20070430 More regression testing. 20070501 Updating the OpenBSD/landisk install instructions to use 4.1 instead of the current snapshot. GAAAH! OpenBSD/landisk 4.1 _needs_ the ugly hack/workaround; reintroducing it again. (The 4.1 kernel is actually from 2007-03-11.) Simplifying the NetBSD/evbarm install instructions a bit. More regression testing. ============== RELEASE 0.4.5.1 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1515 2007/04/14 05:39:46 debug Exp $ 20070324 Adding a "--debug" option to the configure script, to disable optimizations in unstable development builds. Moving out SCSI-specific stuff from diskimage.c into a new diskimage_scsicmd.c. Applying Hĺvard Eidnes' patch for SCSICDROM_READ_DISKINFO and SCSICDROM_READ_TRACKINFO. (Not really tested yet.) Implementing disk image "overlays" (to allow simple roll-back to previous disk state). Adding a 'V' disk flag for this, and updating the man page and misc.html. 20070325 Stability fix to cpu_dyntrans.c, when multiple physical pages share the same initial table entry. (The ppp == NULL check should be physpage_ofs == 0.) Bug found by analysing GXemul against a version patched for Godson. Fixing a second occurance of the same problem (also in cpu_dyntrans.c). Fixing a MAJOR physical page leak in cpu_dyntrans.c; pages weren't _added_ to the set of translated pages, they _replaced_ all previous pages. It's amazing that this bug has been able to live for this long. (Triggered when emulating >128MB RAM.) 20070326 Removing the GDB debugging stub support; it was too hackish and ugly. 20070328 Moving around some native code generation skeleton code. 20070329 The -lm check in the configure script now also checks for sin() in addition to sqrt(). (Thanks to Nigel Horne for noticing that sqrt was not enough on Fedora Core 6.) (Not verified yet.) 20070330 Fixing an indexing bug in dev_sh4.c, found by using gcc version 4.3.0 20070323. 20070331 Some more experimentation with native code generation. 20070404 Attempting to fix some more SH4 SCIF interrupt bugs; rewriting the SH interrupt assertion/deassertion code somewhat. 20070410 Splitting src/file.c into separate files in src/file/. Cleanup: Removing the dummy TS7200, Walnut, PB1000, and Meshcube emulation modes, and dev_epcom and dev_au1x00. Removing the experimental CHIP8/RCA180x code; it wasn't really working much lately, anyway. It was fun while it lasted. Also removing the experimental Transputer CPU support. 20070412 Moving the section about how the dynamic translation system works from intro.html to a separate translation.html file. Minor SH fixes; attempting to get OpenBSD/landisk to run without randomly bugging out, but no success yet. 20070413 SH SCI (serial bit interface) should now work together with a (new) RS5C313 clock device (for Landisk emulation). 20070414 Moving Redhat/MIPS down from supported to experimental, in guestoses.html. Preparing for a new release; doing some regression testing etc. ============== RELEASE 0.4.5 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1497 2007/03/18 03:41:36 debug Exp $ 20070224 Minor update to the initialization of the ns16550 in machine_walnut.c, to allow that machine type to boot with the new interrupt system (although it is still a dummy machine). Adding a wdc at 0x14000000 to machine_landisk.c, and fixing the SCIF serial interrupts of the SH4 cpu enough to get NetBSD/landisk booting from a disk image :-) Adding a preliminary install instruction skeleton to guestoses.html. 20070306 Adding SH-IPL+G PROM emulation, and also passing the "end" symbol in r5 on bootup, for Landisk emulation. This is enough to get OpenBSD/landisk to install :) Adding a preliminary install instruction skeleton to the documentation. SuperH emulation is still shaky, though :-/ 20070307 Fixed a strangeness in memory_sh.c (read/write was never returned for any page). (Unknown whether this fixes any actual problems, though.) 20070308 dev_ram.c fix: invalidate code translations on writes to RAM, emulated as separate devices. Linux/dreamcast gets further in the boot process than before, but still bugs out in userland. Fixing bugs in the "stc.l gbr,@-rN" and "ldc.l @rN+,gbr" SuperH instructions (they should NOT check the MD bit), allowing the Linux/dreamcast Live CD to reach userland correctly :-) 20070310 Changing the cpu name "Alpha" in src/useremul.c to "21364" to unbreak userland syscall emulation of FreeBSD/Alpha binaries. 20070314 Applying a patch from Michael Yaroslavtsev which fixes the previous Linux lib64 patch to the configure script. 20070315 Adding a (dummy) sun4v machine type, and SPARC T1 cpu type. 20070316 Creating a new directory, src/disk, and moving diskimage.c to it. Separating out bootblock loading stuff from emul.c into new files in src/disk. Adding some more SPARC registers. 20070318 Preparing/testing for a minirelease, 0.4.4.1. ============== RELEASE 0.4.4.1 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1480 2007/02/19 01:34:42 debug Exp $ 20061029 Changing usleep(1) calls in the debugger to usleep(10000) 20061107 Adding a new disk image option (-d o...) which sets the ISO9660 filesystem base offset; also making some other hacks to allow NetBSD/dreamcast and homebrew demos/games to boot directly from a filesystem image. Moving Dreamcast-specific stuff in the documentation to its own page (dreamcast.html). Adding a border to the Dreamcast PVR framebuffer. 20061108 Adding a -T command line option (again?), for halting the emulator on unimplemented memory accesses. 20061109 Continuing on various SH4 and Dreamcast related things. The emulator should now halt on more unimplemented device accesses, instead of just printing a warning, forcing me to actually implement missing stuff :) 20061111 Continuing on SH4 and Dreamcast stuff. Adding a bogus Landisk (SH4) machine mode. 20061112 Implementing some parts of the Dreamcast GDROM device. With some ugly hacks, NetBSD can (barely) mount an ISO image. 20061113 NetBSD/dreamcast now starts booting from the Live CD image, but crashes randomly quite early on in the boot process. 20061122 Beginning on a skeleton interrupt.h and interrupt.c for the new interrupt subsystem. 20061124 Continuing on the new interrupt system; taking the first steps to attempt to connect CPUs (SuperH and MIPS) and devices (dev_cons and SH4 timer interrupts) to it. Many things will probably break from now on. 20061125 Converting dev_ns16550, dev_8253 to the new interrupt system. Attempting to begin to convert the ISA bus. 20061130 Incorporating a patch from Brian Foley for the configure script, which checks for X11 libs in /usr/X11R6/lib64 (which is used on some Linux systems). 20061227 Adding a note in the man page about booting from Dreamcast CDROM images (i.e. that no external kernel is needed). 20061229 Continuing on the interrupt system rewrite: beginning to convert more devices, adding abort() calls for legacy interrupt system calls so that everything now _has_ to be rewritten! Almost all machine modes are now completely broken. 20061230 More progress on removing old interrupt code, mostly related to the ISA bus + devices, the LCA bus (on AlphaBook1), and the Footbridge bus (for CATS). And some minor PCI stuff. Connecting the ARM cpu to the new interrupt system. The CATS, NetWinder, and QEMU_MIPS machine modes now work with the new interrupt system :) 20061231 Connecting PowerPC CPUs to the new interrupt system. Making PReP machines (IBM 6050) work again. Beginning to convert the GT PCI controller (for e.g. Malta and Cobalt emulation). Some things work, but not everything. Updating Copyright notices for 2007. 20070101 Converting dev_kn02 from legacy style to devinit; the 3max machine mode now works with the new interrupt system :-] 20070105 Beginning to convert the SGI O2 machine to the new interrupt system; finally converting O2 (IP32) devices to devinit, etc. 20070106 Continuing on the interrupt system redesign/rewrite; KN01 (PMAX), KN230, and Dreamcast ASIC interrupts should work again, moving out stuff from machine.h and devices.h into the corresponding devices, beginning the rewrite of i80321 interrupts, etc. 20070107 Beginning on the rewrite of Eagle interrupt stuff (PReP, etc). 20070117 Beginning the rewrite of Algor (V3) interrupts (finally changing dev_v3 into devinit style). 20070118 Removing the "bus" registry concept from machine.h, because it was practically meaningless. Continuing on the rewrite of Algor V3 ISA interrupts. 20070121 More work on Algor interrupts; they are now working again, well enough to run NetBSD/algor. :-) 20070122 Converting VR41xx (HPCmips) interrupts. NetBSD/hpcmips can be installed using the new interrupt system :-) 20070123 Making the testmips mode work with the new interrupt system. 20070127 Beginning to convert DEC5800 devices to devinit, and to the new interrupt system. Converting Playstation 2 devices to devinit, and converting the interrupt system. Also fixing a severe bug: the interrupt mask register on Playstation 2 is bitwise _toggled_ on writes. 20070128 Removing the dummy NetGear machine mode and the 8250 device (which was only used by the NetGear machine). Beginning to convert the MacPPC GC (Grand Central) interrupt controller to the new interrupt system. Converting Jazz interrupts (PICA61 etc.) to the new interrupt system. NetBSD/arc can be installed again :-) Fixing the JAZZ timer (hardcoding it at 100 Hz, works with NetBSD and it is better than a completely dummy timer as it was before). Converting dev_mp to the new interrupt system, although I haven't had time to actually test it yet. Completely removing src/machines/interrupts.c, cpu_interrupt and cpu_interrupt_ack in src/cpu.c, and src/include/machine_interrupts.h! Adding fatal error messages + abort() in the few places that are left to fix. Converting dev_z8530 to the new interrupt system. FINALLY removing the md_int struct completely from the machine struct. SH4 fixes (adding a PADDR invalidation in the ITLB replacement code in memory_sh.c); the NetBSD/dreamcast LiveCD now runs all the way to the login prompt, and can be interacted with :-) Converting the CPC700 controller (PCI and interrupt controller for PM/PPC) to the new interrupt system. 20070129 Fixing MACE ISA interrupts (SGI IP32 emulation). Both NetBSD/ sgimips' and OpenBSD/sgi's ramdisk kernels can now be interacted with again. 20070130 Moving out the MIPS multi_lw and _sw instruction combinations so that they are auto-generated at compile time instead. 20070131 Adding detection of amd64/x86_64 hosts in the configure script, for doing initial experiments (again :-) with native code generation. Adding a -k command line option to set the size of the dyntrans cache, and a -B command line option to disable native code generation, even if GXemul was compiled with support for native code generation for the specific host CPU architecture. 20070201 Experimenting with a skeleton for native code generation. Changing the default behaviour, so that native code generation is now disabled by default, and has to be enabled by using -b on the command line. 20070202 Continuing the native code generation experiments. Making PCI interrupts work for Footbridge again. 20070203 More native code generation experiments. Removing most of the native code generation experimental code, it does not make sense to include any quick hacks like this. Minor cleanup/removal of some more legacy MIPS interrupt code. 20070204 Making i80321 interrupts work again (for NetBSD/evbarm etc.), and fixing the timer at 100 Hz. 20070206 Experimenting with removing the wdc interrupt slowness hack. 20070207 Lowering the number of dyntrans TLB entries for MIPS from 192 to 128, resulting in a minor speed improvement. Minor optimization to the code invalidation routine in cpu_dyntrans.c. 20070208 Increasing (experimentally) the nr of dyntrans instructions per loop from 60 to 120. 20070210 Commenting out (experimentally) the dyntrans_device_danger detection in memory_rw.c. Changing the testmips and baremips machines to use a revision 2 MIPS64 CPU by default, instead of revision 1. Removing the dummy i960, IA64, x86, AVR32, and HP PA-RISC files, the PC bios emulation, and the Olivetti M700 (ARC) and db64360 emulation modes. 20070211 Adding an "mp" demo to the demos directory, which tests the SMP functionality of the testmips machine. Fixing PReP interrupts some more. NetBSD/prep now boots again. 20070216 Adding a "nop workaround" for booting Mach/PMAX to the documentation; thanks to Artur Bujdoso for the values. Converting more of the MacPPC interrupt stuff to the new system. Beginning to convert BeBox interrupts to the new system. PPC603e should NOT have the PPC_NO_DEC flag! Removing it. Correcting BeBox clock speed (it was set to 100 in the NetBSD bootinfo block, but should be 33000000/4), allowing NetBSD to start without using the (incorrect) PPC_NO_DEC hack. 20070217 Implementing (slow) AltiVec vector loads and stores, allowing NetBSD/macppc to finally boot using the GENERIC kernel :-) Updating the documentation with install instructions for NetBSD/macppc. 20070218-19 Regression testing for the release. ============== RELEASE 0.4.4 ==============
++ trunk/HISTORY (local) $Id: HISTORY,v 1.1421 2006/11/06 05:32:37 debug Exp $ 20060816 Adding a framework for emulated/virtual timers (src/timer.c), using only setitimer(). Rewriting the mc146818 to use the new timer framework. 20060817 Adding a call to gettimeofday() every now and then (once every second, at the moment) to resynch the timer if it drifts. Beginning to convert the ISA timer interrupt mechanism (8253 and 8259) to use the new timer framework. Removing the -I command line option. 20060819 Adding the -I command line option again, with new semantics. Working on Footbridge timer interrupts; NetBSD/NetWinder and NetBSD/CATS now run at correct speed, but unfortunately with HUGE delays during bootup. 20060821 Some minor m68k updates. Adding the first instruction: nop. :) Minor Alpha emulation updates. 20060822 Adding a FreeBSD development specific YAMON environment variable ("khz") (as suggested by Bruce M. Simpson). Moving YAMON environment variable initialization from machine_evbmips.c into promemul/yamon.c, and adding some more variables. Continuing on the LCA PCI bus controller (for Alpha machines). 20060823 Continuing on the timer stuff: experimenting with MIPS count/ compare interrupts connected to the timer framework. 20060825 Adding bogus SCSI commands 0x51 (SCSICDROM_READ_DISCINFO) and 0x52 (SCSICDROM_READ_TRACKINFO) to the SCSI emulation layer, to allow NetBSD/pmax 4.0_BETA to be installed from CDROM. Minor updates to the LCA PCI controller. 20060827 Implementing a CHIP8 cpu mode, and a corresponding CHIP8 machine, for fun. Disassembly support for all instructions, and most of the common instructions have been implemented: mvi, mov_imm, add_imm, jmp, rand, cls, sprite, skeq_imm, jsr, skne_imm, bcd, rts, ldr, str, mov, or, and, xor, add, sub, font, ssound, sdelay, gdelay, bogus skup/skpr, skeq, skne. 20060828 Beginning to convert the CHIP8 cpu in the CHIP8 machine to a (more correct) RCA 180x cpu. (Disassembly for all 1802 instructions has been implemented, but no execution yet, and no 1805 extended instructions.) 20060829 Minor Alpha emulation updates. 20060830 Beginning to experiment a little with PCI IDE for SGI O2. Fixing the cursor key mappings for MobilePro 770 emulation. Fixing the LK201 warning caused by recent NetBSD/pmax. The MIPS R41xx standby, suspend, and hibernate instructions now behave like the RM52xx/MIPS32/MIPS64 wait instruction. Fixing dev_wdc so it calculates correct (64-bit) offsets before giving them to diskimage_access(). 20060831 Continuing on Alpha emulation (OSF1 PALcode). 20060901 Minor Alpha updates; beginning on virtual memory pagetables. Removed the limit for max nr of devices (in preparation for allowing devices' base addresses to be changed during runtime). Adding a hack for MIPS [d]mfc0 select 0 (except the count register), so that the coproc register is simply copied. The MIPS suspend instruction now exits the emulator, instead of being treated as a wait instruction (this causes NetBSD/ hpcmips to get correct 'halt' behavior). The VR41xx RTC now returns correct time. Connecting the VR41xx timer to the timer framework (fixed at 128 Hz, for now). Continuing on SPARC emulation, adding more instructions: restore, ba_xcc, ble. The rectangle drawing demo works :) Removing the last traces of the old ENABLE_CACHE_EMULATION MIPS stuff (not usable with dyntrans anyway). 20060902 Splitting up src/net.c into several smaller files in its own subdirectory (src/net/). 20060903 Cleanup of the files in src/net/, to make them less ugly. 20060904 Continuing on the 'settings' subsystem. Minor progress on the SPARC emulation mode. 20060905 Cleanup of various things, and connecting the settings infrastructure to various subsystems (emul, machine, cpu, etc). Changing the lk201 mouse update routine to not rely on any emulated hardware framebuffer cursor coordinates, but instead always do (semi-usable) relative movements. 20060906 Continuing on the lk201 mouse stuff. Mouse behaviour with multiple framebuffers (which was working in Ultrix) is now semi-broken (but it still works, in a way). Moving the documentation about networking into its own file (networking.html), and refreshing it a bit. Adding an example of how to use ethernet frame direct-access (udp_snoop). 20060907 Continuing on the settings infrastructure. 20060908 Minor updates to SH emulation: for 32-bit emulation: delay slots and the 'jsr @Rn' instruction. I'm putting 64-bit SH5 on ice, for now. 20060909-10 Implementing some more 32-bit SH instructions. Removing the 64-bit mode completely. Enough has now been implemented to run the rectangle drawing demo. :-) 20060912 Adding more SH instructions. 20060916 Continuing on SH emulation (some more instructions: div0u, div1, rotcl/rotcr, more mov instructions, dt, braf, sets, sett, tst_imm, dmuls.l, subc, ldc_rm_vbr, movt, clrt, clrs, clrmac). Continuing on the settings subsystem (beginning on reading/ writing settings, removing bugs, and connecting more cpus to the framework). 20060919 More work on SH emulation; adding an ldc banked instruction, and attaching a 640x480 framebuffer to the Dreamcast machine mode (NetBSD/dreamcast prints the NetBSD copyright banner :-), and then panics). 20060920 Continuing on the settings subsystem. 20060921 Fixing the Footbridge timer stuff so that NetBSD/cats and NetBSD/netwinder boot up without the delays. 20060922 Temporarily hardcoding MIPS timer interrupt to 100 Hz. With 'wait' support disabled, NetBSD/malta and Linux/malta run at correct speed. 20060923 Connecting dev_gt to the timer framework, so that NetBSD/cobalt runs at correct speed. Moving SH4-specific memory mapped registers into its own device (dev_sh4.c). Running with -N now prints "idling" instead of bogus nr of instrs/second (which isn't valid anyway) while idling. 20060924 Algor emulation should now run at correct speed. Adding disassembly support for some MIPS64 revision 2 instructions: ext, dext, dextm, dextu. 20060926 The timer framework now works also when the MIPS wait instruction is used. 20060928 Re-implementing checks for coprocessor availability for MIPS cop0 instructions. (Thanks to Carl van Schaik for noticing the lack of cop0 availability checks.) 20060929 Implementing an instruction combination hack which treats NetBSD/pmax' idle loop as a wait-like instruction. 20060930 The ENTRYHI_R_MASK was missing in (at least) memory_mips_v2p.c, causing TLB lookups to sometimes succeed when they should have failed. (A big thank you to Juli Mallett for noticing the problem.) Adding disassembly support for more MIPS64 revision 2 opcodes (seb, seh, wsbh, jalr.hb, jr.hb, synci, ins, dins, dinsu, dinsm, dsbh, dshd, ror, dror, rorv, drorv, dror32). Also implementing seb, seh, dsbh, dshd, and wsbh. Implementing an instruction combination hack for Linux/pmax' idle loop, similar to the NetBSD/pmax case. 20061001 Changing the NetBSD/sgimips install instructions to extract files from an iso image, instead of downloading them via ftp. 20061002 More-than-31-bit userland addresses in memory_mips_v2p.c were not actually working; applying a fix from Carl van Schaik to enable them to work + making some other updates (adding kuseg support). Fixing hpcmips (vr41xx) timer initialization. Experimenting with O(n)->O(1) reduction in the MIPS TLB lookup loop. Seems to work both for R3000 and non-R3000. 20061003 Continuing a little on SH emulation (adding more control registers; mini-cleanup of memory_sh.c). 20061004 Beginning on a dev_rtc, a clock/timer device for the test machines; also adding a demo, and some documentation. Fixing a bug in SH "mov.w @(disp,pc),Rn" (the result wasn't sign-extended), and adding the addc and ldtlb instructions. 20061005 Contining on SH emulation: virtual to physical address translation, and a skeleton exception mechanism. 20061006 Adding more SH instructions (various loads and stores, rte, negc, muls.w, various privileged register-move instructions). 20061007 More SH instructions: various move instructions, trapa, div0s, float, fdiv, ftrc. Continuing on dev_rtc; removing the rtc demo. 20061008 Adding a dummy Dreamcast PROM module. (Homebrew Dreamcast programs using KOS libs need this.) Adding more SH instructions: "stc vbr,rn", rotl, rotr, fsca, fmul, fadd, various floating-point moves, etc. A 256-byte demo for Dreamcast runs :-) 20061012 Adding the SH "lds Rm,pr" and bsr instructions. 20061013 More SH instructions: "sts fpscr,rn", tas.b, and some more floating point instructions, cmp/str, and more moves. Adding a dummy dev_pvr (Dreamcast graphics controller). 20061014 Generalizing the expression evaluator (used in the built-in debugger) to support parentheses and +-*/%^&|. 20061015 Removing the experimental tlb index hint code in mips_memory_v2p.c, since it didn't really have any effect. 20061017 Minor SH updates; adding the "sts pr,Rn", fcmp/gt, fneg, frchg, and some other instructions. Fixing missing sign- extension in an 8-bit load instruction. 20061019 Adding a simple dev_dreamcast_rtc. Implementing memory-mapped access to the SH ITLB/UTLB arrays. 20061021 Continuing on various SH and Dreamcast things: sh4 timers, debug messages for dev_pvr, fixing some virtual address translation bugs, adding the bsrf instruction. The NetBSD/dreamcast GENERIC_MD kernel now reaches userland :) Adding a dummy dev_dreamcast_asic.c (not really useful yet). Implementing simple support for Store Queues. Beginning on the PVR Tile Accelerator. 20061022 Generalizing the PVR framebuffer to support off-screen drawing, multiple bit-depths, etc. (A small speed penalty, but most likely worth it.) Adding more SH instructions (mulu.w, fcmp/eq, fsub, fmac, fschg, and some more); correcting bugs in "fsca" and "float". 20061024 Adding the SH ftrv (matrix * vector) instruction. Marcus Comstedt's "tatest" example runs :) (wireframe only). Correcting disassembly for SH floating point instructions that use the xd* registers. Adding the SH fsts instruction. In memory_device_dyntrans_access(), only the currently used range is now invalidated, and not the entire device range. 20061025 Adding a dummy AVR32 cpu mode skeleton. 20061026 Various Dreamcast updates; beginning on a Maple bus controller. 20061027 Continuing on the Maple bus. A bogus Controller, Keyboard, and Mouse can now be detected by NetBSD and KOS homebrew programs. Cleaning up the SH4 Timer Management Unit, and beginning on SH4 interrupts. Implementing the Dreamcast SYSASIC. 20061028 Continuing on the SYSASIC. Adding the SH fsqrt instruction. memory_sh.c now actually scans the ITLB. Fixing a bug in dev_sh4.c, related to associative writes into the memory-mapped UTLB array. NetBSD/dreamcast now reaches userland stably, and prints the "Terminal type?" message :-] Implementing enough of the Dreamcast keyboard to make NetBSD accept it for input. Enabling SuperH for stable (non-development) builds. Adding NetBSD/dreamcast to the documentation, although it doesn't support root-on-nfs yet. 20061029 Changing usleep(1) calls in the debugger to to usleep(10000) (according to Brian Foley, this makes GXemul run better on MacOS X). Making the Maple "Controller" do something (enough to barely interact with dcircus.elf). 20061030-31 Some progress on the PVR. More test programs start running (but with strange output). Various other SH4-related updates. 20061102 Various Dreamcast and SH4 updates; more KOS demos run now. 20061104 Adding a skeleton dev_mb8696x.c (the Dreamcast's LAN adapter). 20061105 Continuing on the MB8696x; NetBSD/dreamcast detects it as mbe0. Testing for the release. ============== RELEASE 0.4.3 ==============
This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.
ViewVC Help | |
Powered by ViewVC 1.1.26 |