/[gxemul]/trunk/src/devices/dev_ahc.c
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Contents of /trunk/src/devices/dev_ahc.c

Parent Directory Parent Directory | Revision Log Revision Log


Revision 28 - (show annotations)
Mon Oct 8 16:20:26 2007 UTC (13 years, 1 month ago) by dpavlin
File MIME type: text/plain
File size: 5373 byte(s)
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1298 2006/07/22 11:27:46 debug Exp $
20060626	Continuing on SPARC emulation (beginning on the 'save'
		instruction, register windows, etc).
20060629	Planning statistics gathering (new -s command line option),
		and renaming speed_tricks to allow_instruction_combinations.
20060630	Some minor manual page updates.
		Various cleanups.
		Implementing the -s command line option.
20060701	FINALLY found the bug which prevented Linux and Ultrix from
		running without the ugly hack in the R2000/R3000 cache isol
		code; it was the phystranslation hint array which was buggy.
		Removing the phystranslation hint code completely, for now.
20060702	Minor dyntrans cleanups; invalidation of physpages now only
		invalidate those parts of a page that have actually been
		translated. (32 parts per page.)
		Some MIPS non-R3000 speed fixes.
		Experimenting with MIPS instruction combination for some
		addiu+bne+sw loops, and sw+sw+sw.
		Adding support (again) for larger-than-4KB pages in MIPS tlbw*.
		Continuing on SPARC emulation: adding load/store instructions.
20060704	Fixing a virtual vs physical page shift bug in the new tlbw*
		implementation. Problem noticed by Jakub Jermar. (Many thanks.)
		Moving rfe and eret to cpu_mips_instr.c, since that is the
		only place that uses them nowadays.
20060705	Removing the BSD license from the "testmachine" include files,
		placing them in the public domain instead; this enables the
		testmachine stuff to be used from projects which are
		incompatible with the BSD license for some reason.
20060707	Adding instruction combinations for the R2000/R3000 L1
		I-cache invalidation code used by NetBSD/pmax 3.0, lui+addiu,
		various branches followed by addiu or nop, and jr ra followed
		by addiu. The time it takes to perform a full NetBSD/pmax R3000
		install on the laptop has dropped from 573 seconds to 539. :-)
20060708	Adding a framebuffer controller device (dev_fbctrl), which so
		far can be used to change the fb resolution during runtime, but
		in the future will also be useful for accelerated block fill/
		copy, and possibly also simplified character output.
		Adding an instruction combination for NetBSD/pmax' strlen.
20060709	Minor fixes: reading raw files in src/file.c wasn't memblock
		aligned, removing buggy multi_sw MIPS instruction combination,
		etc.
20060711	Adding a machine_qemu.c, which contains a "qemu_mips" machine.
		(It mimics QEMU's MIPS machine mode, so that a test kernel
		made for QEMU_MIPS also can run in GXemul... at least to some
		extent.)  Adding a short section about how to run this mode to
		doc/guestoses.html.
20060714	Misc. minor code cleanups.
20060715	Applying a patch which adds getchar() to promemul/yamon.c
		(from Oleksandr Tymoshenko).
		Adding yamon.h from NetBSD, and rewriting yamon.c to use it
		(instead of ugly hardcoded numbers) + some cleanup.
20060716	Found and fixed the bug which broke single-stepping of 64-bit
		programs between 0.4.0 and 0.4.0.1 (caused by too quick
		refactoring and no testing). Hopefully this fix will not
		break too many other things.
20060718	Continuing on the 8253 PIT; it now works with Linux/QEMU_MIPS.
		Re-adding the sw+sw+sw instr comb (the problem was that I had
		ignored endian issues); however, it doesn't seem to give any
		big performance gain.
20060720	Adding a dummy Transputer mode (T414, T800 etc) skeleton (only
		the 'j' and 'ldc' instructions are implemented so far). :-}
20060721	Adding gtreg.h from NetBSD, updating dev_gt.c to use it, plus
		misc. other updates to get Linux 2.6 for evbmips/malta working
		(thanks to Alec Voropay for the details).
		FINALLY found and fixed the bug which made tlbw* for non-R3000
		buggy; it was a reference count problem in the dyntrans core.
20060722	Testing stuff; things seem stable enough for a new release.

==============  RELEASE 0.4.1  ==============


1 /*
2 * Copyright (C) 2004-2006 Anders Gavare. All rights reserved.
3 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions are met:
6 *
7 * 1. Redistributions of source code must retain the above copyright
8 * notice, this list of conditions and the following disclaimer.
9 * 2. Redistributions in binary form must reproduce the above copyright
10 * notice, this list of conditions and the following disclaimer in the
11 * documentation and/or other materials provided with the distribution.
12 * 3. The name of the author may not be used to endorse or promote products
13 * derived from this software without specific prior written permission.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25 * SUCH DAMAGE.
26 *
27 *
28 * $Id: dev_ahc.c,v 1.5 2006/07/21 16:55:41 debug Exp $
29 *
30 * Adaptec AHC SCSI controller.
31 *
32 * NetBSD should say something like this, on SGI-IP32:
33 * ahc0 at pci0 dev 1 function 0
34 * ahc0: interrupting at crime irq 0
35 * ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
36 * ahc0: Host Adapter Bios disabled. Using default SCSI device parameters
37 *
38 * TODO: This more or less just a dummy device, so far.
39 */
40
41 #include <stdio.h>
42 #include <stdlib.h>
43 #include <string.h>
44
45 #include "cpu.h"
46 #include "device.h"
47 #include "machine.h"
48 #include "memory.h"
49 #include "misc.h"
50
51 #include "aic7xxx_reg.h"
52
53
54 /* #define AHC_DEBUG
55 #define debug fatal */
56
57
58 #define DEV_AHC_LENGTH 0x100
59
60 struct ahc_data {
61 unsigned char reg[DEV_AHC_LENGTH];
62 };
63
64
65 DEVICE_ACCESS(ahc)
66 {
67 struct ahc_data *d = extra;
68 uint64_t idata, odata = 0;
69 int ok = 0;
70 char *name = NULL;
71
72 idata = memory_readmax64(cpu, data, len);
73
74 /* YUCK! SGI uses reversed order inside 32-bit words: */
75 if (cpu->byte_order == EMUL_BIG_ENDIAN)
76 relative_addr = (relative_addr & ~0x3)
77 | (3 - (relative_addr & 3));
78
79 relative_addr %= DEV_AHC_LENGTH;
80
81 if (len != 1)
82 fatal("[ ahc: ERROR! Unimplemented len %i ]\n", len);
83
84 if (writeflag == MEM_READ)
85 odata = d->reg[relative_addr];
86
87 switch (relative_addr) {
88
89 case SCSIID:
90 if (writeflag == MEM_READ) {
91 ok = 1; name = "SCSIID";
92 odata = 0;
93 } else {
94 fatal("[ ahc: write to SCSIOFFSET, data = 0x"
95 "%02x: TODO ]\n", (int)idata);
96 }
97 break;
98
99 case KERNEL_QINPOS:
100 if (writeflag == MEM_WRITE) {
101
102 /* TODO */
103
104 d->reg[INTSTAT] |= SEQINT;
105 }
106 break;
107
108 case SEECTL:
109 ok = 1; name = "SEECTL";
110 if (writeflag == MEM_WRITE)
111 d->reg[relative_addr] = idata;
112 odata |= SEERDY;
113 break;
114
115 case SCSICONF:
116 ok = 1; name = "SCSICONF";
117 if (writeflag == MEM_READ) {
118 odata = 0;
119 } else {
120 fatal("[ ahc: write to SCSICONF, data = 0x%02x:"
121 " TODO ]\n", (int)idata);
122 }
123 break;
124
125 case SEQRAM:
126 case SEQADDR0:
127 case SEQADDR1:
128 /* TODO: This is just a dummy. */
129 break;
130
131 case HCNTRL:
132 ok = 1; name = "HCNTRL";
133 if (writeflag == MEM_WRITE)
134 d->reg[relative_addr] = idata;
135 break;
136
137 case INTSTAT:
138 ok = 1; name = "INTSTAT";
139 if (writeflag == MEM_WRITE)
140 fatal("[ ahc: write to INTSTAT? data = 0x%02x ]\n",
141 (int)idata);
142 break;
143
144 case CLRINT:
145 if (writeflag == MEM_READ) {
146 ok = 1; name = "ERROR";
147 /* TODO */
148 } else {
149 ok = 1; name = "CLRINT";
150 if (idata & ~0xf)
151 fatal("[ ahc: write to CLRINT: 0x%02x "
152 "(TODO) ]\n", (int)idata);
153 /* Clear the lowest 4 bits of intstat: */
154 d->reg[INTSTAT] &= ~(idata & 0xf);
155 }
156 break;
157
158 default:
159 if (writeflag == MEM_WRITE)
160 fatal("[ ahc: UNIMPLEMENTED write to address 0x%x, "
161 "data=0x%02x ]\n", (int)relative_addr, (int)idata);
162 else
163 fatal("[ ahc: UNIMPLEMENTED read from address 0x%x ]\n",
164 (int)relative_addr);
165 }
166
167 #if 0
168 cpu_interrupt(cpu, 0x200);
169 #endif
170
171 #ifdef AHC_DEBUG
172 if (ok) {
173 if (name == NULL) {
174 if (writeflag == MEM_WRITE)
175 debug("[ ahc: write to address 0x%x: 0x"
176 "%02x ]\n", (int)relative_addr, (int)idata);
177 else
178 debug("[ ahc: read from address 0x%x: 0x"
179 "%02x ]\n", (int)relative_addr, (int)odata);
180 } else {
181 if (writeflag == MEM_WRITE)
182 debug("[ ahc: write to %s: 0x%02x ]\n",
183 name, (int)idata);
184 else
185 debug("[ ahc: read from %s: 0x%02x ]\n",
186 name, (int)odata);
187 }
188 }
189 #endif
190
191 if (writeflag == MEM_READ)
192 memory_writemax64(cpu, data, len, odata);
193
194 return 1;
195 }
196
197
198 DEVINIT(ahc)
199 {
200 struct ahc_data *d = malloc(sizeof(struct ahc_data));
201 if (d == NULL) {
202 fprintf(stderr, "out of memory\n");
203 exit(1);
204 }
205 memset(d, 0, sizeof(struct ahc_data));
206
207 memory_device_register(devinit->machine->memory, devinit->name,
208 devinit->addr, DEV_AHC_LENGTH, dev_ahc_access, d,
209 DM_DEFAULT, NULL);
210
211 return 1;
212 }
213

  ViewVC Help
Powered by ViewVC 1.1.26