/[gxemul]/trunk/src/cpus/generate_head.c
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Annotation of /trunk/src/cpus/generate_head.c

Parent Directory Parent Directory | Revision Log Revision Log


Revision 20 - (hide annotations)
Mon Oct 8 16:19:23 2007 UTC (16 years, 5 months ago) by dpavlin
File MIME type: text/plain
File size: 5672 byte(s)
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1055 2005/11/25 22:48:36 debug Exp $
20051031	Adding disassembly support for more ARM instructions (clz,
		smul* etc), and adding a hack to support "new tiny" pages
		for StrongARM.
20051101	Minor documentation updates (NetBSD 2.0.2 -> 2.1, and OpenBSD
		3.7 -> 3.8, and lots of testing).
		Changing from 1-sector PIO mode 0 transfers to 128-sector PIO
		mode 3 (in dev_wdc).
		Various minor ARM dyntrans updates (pc-relative loads from
		within the same page as the instruction are now treated as
		constant "mov").
20051102	Re-enabling instruction combinations (they were accidentally
		disabled).
		Dyntrans TLB entries are now overwritten using a round-robin
		scheme instead of randomly. This increases performance.
		Fixing a typo in file.c (thanks to Chuan-Hua Chang for
		noticing it).
		Experimenting with adding ATAPI support to dev_wdc (to make
		emulated *BSD detect cdroms as cdroms, not harddisks).
20051104	Various minor updates.
20051105	Continuing on the ATAPI emulation. Seems to work well enough
		for a NetBSD/cats installation, but not OpenBSD/cats.
		Various other updates.
20051106	Modifying the -Y command line option to allow scaleup with
		certain graphic controllers (only dev_vga so far), not just
		scaledown.
		Some minor dyntrans cleanups.
20051107	Beginning a cleanup up the PCI subsystem (removing the
		read_register hack, etc).
20051108	Continuing the cleanup; splitting up some pci devices into a
		normal autodev device and some separate pci glue code.
20051109	Continuing on the PCI bus stuff; all old pci_*.c have been
		incorporated into normal devices and/or rewritten as glue code
		only, adding a dummy Intel 82371AB PIIX4 for Malta (not really
		tested yet).
		Minor pckbc fix so that Linux doesn't complain.
		Working on the DEC 21143 NIC (ethernet mac rom stuff mostly).
		Various other minor fixes.
20051110	Some more ARM dyntrans fine-tuning (e.g. some instruction
		combinations (cmps followed by conditional branch within the
		same page) and special cases for DPIs with regform when the
		shifter isn't used).
20051111	ARM dyntrans updates: O(n)->O(1) for just-mark-as-non-
		writable in the generic pc_to_pointers function, and some other
		minor hacks.
		Merging Cobalt and evbmips (Malta) ISA interrupt handling,
		and some minor fixes to allow Linux to accept harddisk irqs.
20051112	Minor device updates (pckbc, dec21143, lpt, ...), most
		importantly fixing the ALI M1543/M5229 so that harddisk irqs
		work with Linux/CATS.
20051113	Some more generalizations of the PCI subsystem.
		Finally took the time to add a hack for SCSI CDROM TOCs; this
		enables OpenBSD to use partition 'a' (as needed by the OpenBSD
		installer), and Windows NT's installer to get a bit further.
		Also fixing dev_wdc to allow Linux to detect ATAPI CDROMs.
		Continuing on the DEC 21143.
20051114	Minor ARM dyntrans tweaks; ARM cmps+branch optimization when
		comparing with 0, and generalizing the xchg instr. comb.
		Adding disassembly of ARM mrrc/mcrr and q{,d}{add,sub}.
20051115	Continuing on various PPC things (BATs, other address trans-
		lation things, various loads/stores, BeBox emulation, etc.).
		Beginning to work on PPC interrupt/exception support.
20051116	Factoring out some code which initializes legacy ISA devices
		from those machines that use them (bus_isa).
		Continuing on PPC interrupt/exception support.
20051117	Minor Malta fixes: RTC year offset = 80, disabling a speed hack
		which caused NetBSD to detect a too fast cpu, and adding a new
		hack to make Linux detect a faster cpu.
		Continuing on the Artesyn PM/PPC emulation mode.
		Adding an Algor emulation skeleton (P4032 and P5064);
		implementing some of the basics.
		Continuing on PPC emulation in general; usage of unimplemented
		SPRs is now easier to track, continuing on memory/exception
		related issues, etc.
20051118	More work on PPC emulation (tgpr0..3, exception handling,
		memory stuff, syscalls, etc.).
20051119	Changing the ARM dyntrans code to mostly use cpu->pc, and not
		necessarily use arm reg 15. Seems to work.
		Various PPC updates; continuing on the PReP emulation mode.
20051120	Adding a workaround/hack to dev_mc146818 to allow NetBSD/prep
		to detect the clock.
20051121	More cleanup of the PCI bus (memory and I/O bases, etc).
		Continuing on various PPC things (decrementer and timebase,
		WDCs on obio (on PReP) use irq 13, not 14/15).
20051122	Continuing on the CPC700 controller (interrupts etc) for PMPPC,
		and on PPC stuff in general.
		Finally! After some bug fixes to the virtual to physical addr
		translation, NetBSD/{prep,pmppc} 2.1 reach userland and are
		stable enough to be interacted with.
		More PCI updates; reverse-endian device access for PowerPC etc.
20051123	Generalizing the IEEE floating point subsystem (moving it out
		from src/cpus/cpu_mips_coproc.c into a new src/float_emul.c).
		Input via slave xterms was sometimes not really working; fixing
		this for ns16550, and a warning message is now displayed if
		multiple non-xterm consoles are active.
		Adding some PPC floating point support, etc.
		Various interrupt related updates (dev_wdc, _ns16550, _8259,
		and the isa32 common code in machine.c).
		NetBSD/prep can now be installed! :-) (Well, with some manual
		commands necessary before running sysinst.) Updating the
		documentation and various other things to reflect this.
20051124	Various minor documentation updates.
		Continuing the work on the DEC 21143 NIC.
20051125	LOTS of work on the 21143. Both OpenBSD and NetBSD work fine
		with it now, except that OpenBSD sometimes gives a time-out
		warning.
		Minor documentation updates.

==============  RELEASE 0.3.7  ==============


1 dpavlin 14 /*
2     * Copyright (C) 2005 Anders Gavare. All rights reserved.
3     *
4     * Redistribution and use in source and binary forms, with or without
5     * modification, are permitted provided that the following conditions are met:
6     *
7     * 1. Redistributions of source code must retain the above copyright
8     * notice, this list of conditions and the following disclaimer.
9     * 2. Redistributions in binary form must reproduce the above copyright
10     * notice, this list of conditions and the following disclaimer in the
11     * documentation and/or other materials provided with the distribution.
12     * 3. The name of the author may not be used to endorse or promote products
13     * derived from this software without specific prior written permission.
14     *
15     * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16     * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17     * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18     * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19     * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20     * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21     * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22     * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23     * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24     * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25     * SUCH DAMAGE.
26     *
27     *
28 dpavlin 20 * $Id: generate_head.c,v 1.8 2005/11/06 22:41:12 debug Exp $
29 dpavlin 14 */
30    
31     #include <stdio.h>
32     #include <stdlib.h>
33     #include <string.h>
34    
35    
36     char *uppercase(char *l)
37     {
38     static char staticbuf[1000];
39     int i = 0;
40    
41     while (*l && i < sizeof(staticbuf)) {
42     char u = *l++;
43     if (u >= 'a' && u <= 'z')
44     u -= 32;
45     staticbuf[i++] = u;
46     }
47     if (i == sizeof(staticbuf))
48     i--;
49     staticbuf[i] = 0;
50     return staticbuf;
51     }
52    
53    
54     int main(int argc, char *argv[])
55     {
56     char *a, *b;
57    
58     if (argc != 3) {
59     fprintf(stderr, "usage: %s arch Arch\n", argv[0]);
60     fprintf(stderr, "Example: %s alpha Alpha\n", argv[0]);
61     fprintf(stderr, " or: %s arm ARM\n", argv[0]);
62     exit(1);
63     }
64    
65     a = argv[1];
66     b = argv[2];
67    
68     printf("\n/* AUTOMATICALLY GENERATED! Do not edit. */\n\n");
69    
70     printf("#define DYNTRANS_MAX_VPH_TLB_ENTRIES "
71     "%s_MAX_VPH_TLB_ENTRIES\n", uppercase(a));
72     printf("#define DYNTRANS_ARCH %s\n", a);
73     printf("#define DYNTRANS_%s\n", uppercase(a));
74     printf("#ifdef DYNTRANS_32\n"
75     "#define DYNTRANS_1LEVEL\n"
76     "#endif\n");
77     printf("#ifndef DYNTRANS_PAGESIZE\n"
78     "#define DYNTRANS_PAGESIZE 4096\n"
79     "#endif\n");
80     printf("#define DYNTRANS_IC %s_instr_call\n", a);
81     printf("#define DYNTRANS_IC_ENTRIES_PER_PAGE "
82     "%s_IC_ENTRIES_PER_PAGE\n", uppercase(a));
83     printf("#define DYNTRANS_INSTR_ALIGNMENT_SHIFT "
84     "%s_INSTR_ALIGNMENT_SHIFT\n", uppercase(a));
85     printf("#define DYNTRANS_TC_PHYSPAGE %s_tc_physpage\n", a);
86     printf("#define DYNTRANS_INVALIDATE_TLB_ENTRY "
87     "%s_invalidate_tlb_entry\n", a);
88     printf("#define DYNTRANS_ADDR_TO_PAGENR %s_ADDR_TO_PAGENR\n",
89     uppercase(a));
90     printf("#define DYNTRANS_PC_TO_IC_ENTRY %s_PC_TO_IC_ENTRY\n",
91     uppercase(a));
92     printf("#define DYNTRANS_TC_ALLOCATE "
93     "%s_tc_allocate_default_page\n", a);
94     printf("#define DYNTRANS_TC_PHYSPAGE %s_tc_physpage\n", a);
95     printf("#define DYNTRANS_PC_TO_POINTERS %s_pc_to_pointers\n", a);
96     printf("#define DYNTRANS_PC_TO_POINTERS_GENERIC "
97     "%s_pc_to_pointers_generic\n", a);
98     printf("#define COMBINE_INSTRUCTIONS %s_combine_instructions\n", a);
99     printf("#define DISASSEMBLE %s_cpu_disassemble_instr\n", a);
100    
101     printf("\nextern volatile int single_step, single_step_breakpoint;"
102     "\nextern int debugger_n_steps_left_before_interaction;\n"
103     "extern int old_show_trace_tree;\n"
104     "extern int old_instruction_trace;\n"
105     "extern int old_quiet_mode;\n"
106 dpavlin 18 "extern int show_opcode_statistics;\n"
107 dpavlin 14 "extern int quiet_mode;\n");
108    
109     printf("\n/* instr uses the same names as in "
110     "cpu_%s_instr.c */\n#define instr(n) %s_instr_ ## n\n\n", a, a);
111    
112     printf("#ifdef DYNTRANS_DUALMODE_32\n"
113     "#define instr32(n) %s32_instr_ ## n\n\n", a);
114     printf("#endif\n\n");
115    
116 dpavlin 18 printf("/* This is for marking a physical page as containing"
117     "\n combined instructions: */\n");
118 dpavlin 14 printf("#define combined (cpu->cd.%s.cur_physpage->flags "
119     "|= COMBINATIONS)\n", a);
120    
121     printf("\n#define X(n) void %s_instr_ ## n(struct cpu *cpu, \\\n"
122     " struct %s_instr_call *ic)\n", a, a);
123    
124     printf("\n/*\n * nothing: Do nothing.\n *\n"
125     " * The difference between this function and a \"nop\" "
126     "instruction is that\n * this function does not increase "
127     "the program counter or the number of\n * translated "
128     "instructions. It is used to \"get out\" of running in "
129     "translated\n * mode.\n *\n"
130     " * IMPORTANT NOTE: Do a cpu->running_translated = 0;\n"
131     " * before setting cpu->cd.%s.next_ic = "
132     "&nothing_call;\n */\n", a);
133     printf("X(nothing)\n{\n");
134     printf("\tcpu->n_translated_instrs --;\n");
135     printf("\tcpu->cd.%s.next_ic --;\n", a);
136     printf("}\n\n");
137    
138     /* TODO: solve this in a nicer way! */
139     if (strcmp(a, "avr") == 0)
140     printf("static struct %s_instr_call nothing_call = { "
141 dpavlin 20 "instr(nothing), 0, {0,0} };\n", a);
142     else {
143     printf("#ifdef DYNTRANS_VARIABLE_INSTRUCTION_LENGTH\n");
144 dpavlin 14 printf("static struct %s_instr_call nothing_call = { "
145 dpavlin 20 "instr(nothing), 0, {0,0,0} };\n", a);
146     printf("#else\n");
147     printf("static struct %s_instr_call nothing_call = { "
148 dpavlin 14 "instr(nothing), {0,0,0} };\n", a);
149 dpavlin 20 printf("#endif\n");
150     }
151 dpavlin 14
152     printf("\n");
153    
154     return 0;
155     }

  ViewVC Help
Powered by ViewVC 1.1.26