Log of /trunk/src/cpus/cpu_m88k.c

---

Revision 42 - (view) (annotate) - [select for diffs]
Modified Mon Oct 8 16:22:32 2007 UTC (16 years, 6 months ago) by dpavlin
File length: 35380 byte(s)
Diff to previous 40

++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1613 2007/06/15 20:11:26 debug Exp $
20070501	Continuing a little on m88k disassembly (control registers,
		more instructions).
		Adding a dummy mvme88k machine mode.
20070502	Re-adding MIPS load/store alignment exceptions.
20070503	Implementing more of the M88K disassembly code.
20070504	Adding disassembly of some more M88K load/store instructions.
		Implementing some relatively simple M88K instructions (br.n,
		xor[.u] imm, and[.u] imm).
20070505	Implementing M88K three-register and, or, xor, and jmp[.n],
		bsr[.n] including function call trace stuff.
		Applying a patch from Bruce M. Simpson which implements the
		SYSCON_BOARD_CPU_CLOCK_FREQ_ID object of the syscon call in
		the yamon PROM emulation.
20070506	Implementing M88K bb0[.n] and bb1[.n], and skeletons for
		ldcr and stcr (although no control regs are implemented yet).
20070509	Found and fixed the bug which caused Linux for QEMU_MIPS to
		stop working in 0.4.5.1: It was a faulty change to the MIPS
		'sc' and 'scd' instructions I made while going through gcc -W
		warnings on 20070428.
20070510	Updating the Linux/QEMU_MIPS section in guestoses.html to
		use mips-test-0.2.tar.gz instead of 0.1.
		A big thank you to Miod Vallat for sending me M88K manuals.
		Implementing more M88K instructions (addu, subu, div[u], mulu,
		ext[u], clr, set, cmp).
20070511	Fixing bugs in the M88K "and" and "and.u" instructions (found
		by comparing against the manual).
		Implementing more M88K instructions (mask[.u], mak, bcnd (auto-
		generated)) and some more control register details.
		Cleanup: Removing the experimental AVR emulation mode and
		corresponding devices; AVR emulation wasn't really meaningful.
		Implementing autogeneration of most M88K loads/stores. The
		rectangle drawing demo (with -O0) for M88K runs :-)
		Beginning on M88K exception handling.
		More M88K instructions: tb0, tb1, rte, sub, jsr[.n].
		Adding some skeleton MVME PROM ("BUG") emulation.
20070512	Fixing a bug in the M88K cmp instruction.
		Adding the M88K lda (scaled register) instruction.
		Fixing bugs in 64-bit (32-bit pairs) M88K loads/stores.
		Removing the unused tick_hz stuff from the machine struct.
		Implementing the M88K xmem instruction. OpenBSD/mvme88k gets
		far enough to display the Copyright banner :-)
		Implementing subu.co (guess), addu.co, addu.ci, ff0, and ff1.
		Adding a dev_mvme187, for MVME187-specific devices/registers.
		OpenBSD/mvme88k prints more boot messages. :)
20070515	Continuing on MVME187 emulation (adding more devices, beginning
		on the CMMUs, etc).
		Adding the M88K and.c, xor.c, and or.c instructions, and making
		sure that mul, div, etc cause exceptions if executed when SFD1
		is disabled.
20070517	Continuing on M88K and MVME187 emulation in general; moving
		the CMMU registers to the CPU struct, separating dev_pcc2 from
		dev_mvme187, and beginning on memory_m88k.c (BATC and PATC).
		Fixing a bug in 64-bit (32-bit pairs) M88K fast stores.
		Implementing the clock part of dev_mk48txx.
		Implementing the M88K fstcr and xcr instructions.
		Implementing m88k_cpu_tlbdump().
		Beginning on the implementation of a separate address space
		for M88K .usr loads/stores.
20070520	Removing the non-working (skeleton) Sandpoint, SonyNEWS, SHARK
		Dnard, and Zaurus machine modes.
		Experimenting with dyntrans to_be_translated read-ahead. It
		seems to give a very small performance increase for MIPS
		emulation, but a large performance degradation for SuperH. Hm.
20070522	Disabling correct SuperH ITLB emulation; it does not seem to be
		necessary in order to let SH4 guest OSes run, and it slows down
		userspace code.
		Implementing "samepage" branches for SuperH emulation, and some
		other minor speed hacks.
20070525	Continuing on M88K memory-related stuff: exceptions, memory
		transaction register contents, etc.
		Implementing the M88K subu.ci instruction.
		Removing the non-working (skeleton) Iyonix machine mode.
		OpenBSD/mvme88k reaches userland :-), starts executing
		/sbin/init's instructions, and issues a few syscalls, before
		crashing.
20070526	Fixing bugs in dev_mk48txx, so that OpenBSD/mvme88k detects
		the correct time-of-day.
		Implementing a generic IRQ controller for the test machines
		(dev_irqc), similar to a proposed patch from Petr Stepan.
		Experimenting some more with translation read-ahead.
		Adding an "expect" script for automated OpenBSD/landisk
		install regression/performance tests.
20070527	Adding a dummy mmEye (SH3) machine mode skeleton.
		FINALLY found the strange M88K bug I have been hunting: I had
		not emulated the SNIP value for exceptions occurring in
		branch delay slots correctly.
		Implementing correct exceptions for 64-bit M88K loads/stores.
		Address to symbol lookups are now disabled when M88K is
		running in usermode (because usermode addresses don't have
		anything to do with supervisor addresses).
20070531	Removing the mmEye machine mode skeleton.
20070604	Some minor code cleanup.
20070605	Moving src/useremul.c into a subdir (src/useremul/), and
		cleaning up some more legacy constructs.
		Adding -Wstrict-aliasing and -fstrict-aliasing detection to
		the configure script.
20070606	Adding a check for broken GCC on Solaris to the configure
		script. (GCC 3.4.3 on Solaris cannot handle static variables
		which are initialized to 0 or NULL. :-/)
		Removing the old (non-working) ARC emulation modes: NEC RD94,
		R94, R96, and R98, and the last traces of Olivetti M700 and
		Deskstation Tyne.
		Removing the non-working skeleton WDSC device (dev_wdsc).
20070607	Thinking about how to use the host's cc + ld at runtime to
		generate native code. (See experiments/native_cc_ld_test.i
		for an example.)
20070608	Adding a program counter sampling timer, which could be useful
		for native code generation experiments.
		The KN02_CSR_NRMMOD bit in the DECstation 5000/200 (KN02) CSR
		should always be set, to allow a 5000/200 PROM to boot.
20070609	Moving out breakpoint details from the machine struct into
		a helper struct, and removing the limit on max nr of
		breakpoints.
20070610	Moving out tick functions into a helper struct as well (which
		also gets rid of the max limit).
20070612	FINALLY figured out why Debian/DECstation stopped working when
		translation read-ahead was enabled: in src/memory_rw.c, the
		call to invalidate_code_translation was made also if the
		memory access was an instruction load (if the page was mapped
		as writable); it shouldn't be called in that case.
20070613	Implementing some more MIPS32/64 revision 2 instructions: di,
		ei, ext, dext, dextm, dextu, and ins.
20070614	Implementing an instruction combination for the NetBSD/arm
		idle loop (making the host not use any cpu if NetBSD/arm
		inside the emulator is not using any cpu).
		Increasing the nr of ARM VPH entries from 128 to 384.
20070615	Removing the ENABLE_arch stuff from the configure script, so
		that all included architectures are included in both release
		and development builds.
		Moving memory related helper functions from misc.c to memory.c.
		Adding preliminary instructions for netbooting NetBSD/pmppc to
		guestoses.html; it doesn't work yet, there are weird timeouts.
		Beginning a total rewrite of the userland emulation modes
		(removing all emulation modes, beginning from scratch with
		NetBSD/MIPS and FreeBSD/Alpha only).
20070616	After fixing a bug in the DEC21143 NIC (the TDSTAT_OWN bit was
		only cleared for the last segment when transmitting, not all
		segments), NetBSD/pmppc boots with root-on-nfs without the
		timeouts. Updating guestoses.html.
		Removing the skeleton PSP (Playstation Portable) mode.
		Moving X11-related stuff in the machine struct into a helper
		struct.
		Cleanup of out-of-memory checks, to use a new CHECK_ALLOCATION
		macro (which prints a meaningful error message).
		Adding a COMMENT to each machine and device (for automagic
		.index comment generation).
		Doing regression testing for the next release.

==============  RELEASE 0.4.6  ==============

---

Revision 40 - (view) (annotate) - [select for diffs]
Added Mon Oct 8 16:22:11 2007 UTC (16 years, 6 months ago) by dpavlin
File length: 13086 byte(s)

++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1539 2007/05/01 04:03:51 debug Exp $
20070415	Landisk PCLOCK should be 33.33 MHz, not 50 MHz. (This makes
		the clock run at correct speed.)
		FINALLY found and fixed the bug which caused OpenBSD/landisk
		to randomly bug out: an &-sign was missing in the special case
		handling of FPSCR in the 'LDS.L @Rm+,FPSCR' instruction.
		Adding similar special case handling for 'LDC.L @Rm+,SR'
		(calling sh_update_sr() instead of just loading).
		Implementing the 'FCNVSD FPUL,DRn' and 'FCNVDS DRm,FPUL'
		SuperH instructions.
		The 'LDC Rm,SR' instruction now immediately breaks out of the
		dyntrans loop if an interrupt is to be triggered.
20070416	In memory_rw.c, if mapping a page as writable, make sure to
		invalidate code translations even if the data access was a
		read.
		Minor SuperH updates.
20070418	Removing the dummy M68K emulation mode.
		Minor SH update (turning unnecessary sts_mach_rn, sts_macl_rn,
		and sts_pr_rn instruction handlers into mov_rm_rn).
20070419	Beginning to add a skeleton for an M88K mode: Adding a hack to
		allow OpenBSD/m88k a.out binaries to be loaded, and disassembly
		of a few simple 88K instructions.
		Commenting out the 'LDC Rm,SR' fix from a few days ago, because
		it made Linux/dreamcast bug out.
		Adding a hack to dev_sh4.c (an extra translation cache
		invalidation), which allows OpenBSD/landisk to boot ok after
		an install. Upgrading the Landisk machine mode to stable,
		updating documentation, etc.
20070420	Experimenting with adding a PCI controller (pcic) to dev_sh4.
		Adding a dummy Realtek 8139C+ skeleton device (dev_rtl8139c).
		Implementing the first M88K instructions (br, or[.u] imm), and
		adding disassembly of some more instructions.
20070421	Continuing a little on dev_rtl8139c.
20070422	Implementing the 9346 EEPROM "read" command for dev_rtl8139c.
		Finally found and fixed an old bug in the log n symbol search
		(it sometimes missed symbols). Debug trace (-i, -t etc) should
		now show more symbols. :-)
20070423	Continuing a little on M88K disassembly.
20070428	Fixing a memset arg order bug in src/net/net.c (thanks to
		Nigel Horne for noticing the bug).
		Applying parts of a patch from Carl van Schaik to clear out
		bottom bits of MIPS addresses more correctly, when using large
		page sizes, and doing some other minor cleanup/refactoring.
		Fixing a couple of warnings given by gcc with the -W option (a
		few more warnings than just plain -Wall).
		Reducing SuperH dyntrans physical address space from 64-bit to
		32-bit (since SH5/SH64 isn't imlemented yet anyway).
		Adding address-to-symbol annotation to a few more instructions
		in the SuperH instruction trace output.
		Beginning regression testing for the next release.
		Reverting the value of SCIF_DELAYED_TX_VALUE from 1 to 2,
		because OpenBSD/landisk may otherwise hang randomly.
20070429	The ugly hack/workaround to get OpenBSD/landisk booting without
		crashing does NOT work anymore (with the April 21 snapshot
		of OpenBSD/landisk). Strangely enough, removing the hack
		completely causes OpenBSD/landisk to work (!).
		More regression testing (re-testing everything SuperH-related,
		and some other things).
		Cobalt interrupts were actually broken; fixing by commenting
		out the DEC21143s in the Cobalt machine.
20070430	More regression testing.
20070501	Updating the OpenBSD/landisk install instructions to use
		4.1 instead of the current snapshot.
		GAAAH! OpenBSD/landisk 4.1 _needs_ the ugly hack/workaround;
		reintroducing it again. (The 4.1 kernel is actually from
		2007-03-11.)
		Simplifying the NetBSD/evbarm install instructions a bit.
		More regression testing.

==============  RELEASE 0.4.5.1  ==============