/[gxemul]/trunk/src/cpus/arm_quick_pc_to_pointers.h
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Log of /trunk/src/cpus/arm_quick_pc_to_pointers.h

Parent Directory Parent Directory | Revision Log Revision Log


Sticky Revision:
(Current path doesn't exist after revision 21)

Revision 20 - (view) (annotate) - [select for diffs]
Modified Mon Oct 8 16:19:23 2007 UTC (13 years, 1 month ago) by dpavlin
File length: 497 byte(s)
Diff to previous 18
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1055 2005/11/25 22:48:36 debug Exp $
20051031	Adding disassembly support for more ARM instructions (clz,
		smul* etc), and adding a hack to support "new tiny" pages
		for StrongARM.
20051101	Minor documentation updates (NetBSD 2.0.2 -> 2.1, and OpenBSD
		3.7 -> 3.8, and lots of testing).
		Changing from 1-sector PIO mode 0 transfers to 128-sector PIO
		mode 3 (in dev_wdc).
		Various minor ARM dyntrans updates (pc-relative loads from
		within the same page as the instruction are now treated as
		constant "mov").
20051102	Re-enabling instruction combinations (they were accidentally
		disabled).
		Dyntrans TLB entries are now overwritten using a round-robin
		scheme instead of randomly. This increases performance.
		Fixing a typo in file.c (thanks to Chuan-Hua Chang for
		noticing it).
		Experimenting with adding ATAPI support to dev_wdc (to make
		emulated *BSD detect cdroms as cdroms, not harddisks).
20051104	Various minor updates.
20051105	Continuing on the ATAPI emulation. Seems to work well enough
		for a NetBSD/cats installation, but not OpenBSD/cats.
		Various other updates.
20051106	Modifying the -Y command line option to allow scaleup with
		certain graphic controllers (only dev_vga so far), not just
		scaledown.
		Some minor dyntrans cleanups.
20051107	Beginning a cleanup up the PCI subsystem (removing the
		read_register hack, etc).
20051108	Continuing the cleanup; splitting up some pci devices into a
		normal autodev device and some separate pci glue code.
20051109	Continuing on the PCI bus stuff; all old pci_*.c have been
		incorporated into normal devices and/or rewritten as glue code
		only, adding a dummy Intel 82371AB PIIX4 for Malta (not really
		tested yet).
		Minor pckbc fix so that Linux doesn't complain.
		Working on the DEC 21143 NIC (ethernet mac rom stuff mostly).
		Various other minor fixes.
20051110	Some more ARM dyntrans fine-tuning (e.g. some instruction
		combinations (cmps followed by conditional branch within the
		same page) and special cases for DPIs with regform when the
		shifter isn't used).
20051111	ARM dyntrans updates: O(n)->O(1) for just-mark-as-non-
		writable in the generic pc_to_pointers function, and some other
		minor hacks.
		Merging Cobalt and evbmips (Malta) ISA interrupt handling,
		and some minor fixes to allow Linux to accept harddisk irqs.
20051112	Minor device updates (pckbc, dec21143, lpt, ...), most
		importantly fixing the ALI M1543/M5229 so that harddisk irqs
		work with Linux/CATS.
20051113	Some more generalizations of the PCI subsystem.
		Finally took the time to add a hack for SCSI CDROM TOCs; this
		enables OpenBSD to use partition 'a' (as needed by the OpenBSD
		installer), and Windows NT's installer to get a bit further.
		Also fixing dev_wdc to allow Linux to detect ATAPI CDROMs.
		Continuing on the DEC 21143.
20051114	Minor ARM dyntrans tweaks; ARM cmps+branch optimization when
		comparing with 0, and generalizing the xchg instr. comb.
		Adding disassembly of ARM mrrc/mcrr and q{,d}{add,sub}.
20051115	Continuing on various PPC things (BATs, other address trans-
		lation things, various loads/stores, BeBox emulation, etc.).
		Beginning to work on PPC interrupt/exception support.
20051116	Factoring out some code which initializes legacy ISA devices
		from those machines that use them (bus_isa).
		Continuing on PPC interrupt/exception support.
20051117	Minor Malta fixes: RTC year offset = 80, disabling a speed hack
		which caused NetBSD to detect a too fast cpu, and adding a new
		hack to make Linux detect a faster cpu.
		Continuing on the Artesyn PM/PPC emulation mode.
		Adding an Algor emulation skeleton (P4032 and P5064);
		implementing some of the basics.
		Continuing on PPC emulation in general; usage of unimplemented
		SPRs is now easier to track, continuing on memory/exception
		related issues, etc.
20051118	More work on PPC emulation (tgpr0..3, exception handling,
		memory stuff, syscalls, etc.).
20051119	Changing the ARM dyntrans code to mostly use cpu->pc, and not
		necessarily use arm reg 15. Seems to work.
		Various PPC updates; continuing on the PReP emulation mode.
20051120	Adding a workaround/hack to dev_mc146818 to allow NetBSD/prep
		to detect the clock.
20051121	More cleanup of the PCI bus (memory and I/O bases, etc).
		Continuing on various PPC things (decrementer and timebase,
		WDCs on obio (on PReP) use irq 13, not 14/15).
20051122	Continuing on the CPC700 controller (interrupts etc) for PMPPC,
		and on PPC stuff in general.
		Finally! After some bug fixes to the virtual to physical addr
		translation, NetBSD/{prep,pmppc} 2.1 reach userland and are
		stable enough to be interacted with.
		More PCI updates; reverse-endian device access for PowerPC etc.
20051123	Generalizing the IEEE floating point subsystem (moving it out
		from src/cpus/cpu_mips_coproc.c into a new src/float_emul.c).
		Input via slave xterms was sometimes not really working; fixing
		this for ns16550, and a warning message is now displayed if
		multiple non-xterm consoles are active.
		Adding some PPC floating point support, etc.
		Various interrupt related updates (dev_wdc, _ns16550, _8259,
		and the isa32 common code in machine.c).
		NetBSD/prep can now be installed! :-) (Well, with some manual
		commands necessary before running sysinst.) Updating the
		documentation and various other things to reflect this.
20051124	Various minor documentation updates.
		Continuing the work on the DEC 21143 NIC.
20051125	LOTS of work on the 21143. Both OpenBSD and NetBSD work fine
		with it now, except that OpenBSD sometimes gives a time-out
		warning.
		Minor documentation updates.

==============  RELEASE 0.3.7  ==============



Revision 18 - (view) (annotate) - [select for diffs]
Added Mon Oct 8 16:19:11 2007 UTC (13 years, 1 month ago) by dpavlin
File length: 586 byte(s)
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1004 2005/10/27 14:01:10 debug Exp $
20051011        Passing -A as the default boot arg for CATS (works fine with
                OpenBSD/cats).
20051012	Fixing the VGA cursor offset bug, and speeding up framebuffer
		redraws if character cells contain the same thing as during
		the last redraw.
20051013	Adding a slow strd ARM instruction hack.
20051017	Minor updates: Adding a dummy i80321 Verde controller (for
		XScale emulation), fixing the disassembly of the ARM "ldrd"
		instruction, adding "support" for less-than-4KB pages for ARM
		(by not adding them to translation tables).
20051020	Continuing on some HPCarm stuff. A NetBSD/hpcarm kernel prints
		some boot messages on an emulated Jornada 720.
		Making dev_ram work better with dyntrans (speeds up some things
		quite a bit).
20051021	Automatically generating some of the most common ARM load/store
		multiple instructions.
20051022	Better statistics gathering for the ARM load/store multiple.
		Various other dyntrans and device updates.
20051023	Various minor updates.
20051024	Continuing; minor device and dyntrans fine-tuning. Adding the
		first "reasonable" instruction combination hacks for ARM (the
		cores of NetBSD/cats' memset and memcpy).
20051025	Fixing a dyntrans-related bug in dev_vga. Also changing the
		dyntrans low/high access notification to only be updated on
		writes, not reads. Hopefully it will be enough. (dev_vga in
		charcell mode now seems to work correctly with both reads and
		writes.)
		Experimenting with gathering dyntrans statistics (which parts
		of emulated RAM that are actually executed), and adding
		instruction combination hacks for cache cleaning and a part of
		NetBSD's scanc() function.
20051026	Adding a bitmap for ARM emulation which indicates if a page is
		(specifically) user accessible; loads and stores with the t-
		flag set can now use the translation arrays, which results in
		a measurable speedup.
20051027	Dyntrans updates; adding an extra bitmap array for 32-bit
		emulation modes, speeding up the check whether a physical page
		has any code translations or not (O(n) -> O(1)). Doing a
		similar reduction of O(n) to O(1) by avoiding the scan through
		the translation entries on a translation update (32-bit mode
		only).
		Various other minor hacks.
20051029	Quick release, without any testing at all.

==============  RELEASE 0.3.6.2  ==============



This form allows you to request diffs between any two revisions of this file. For each of the two "sides" of the diff, enter a numeric revision.

  Diffs between and
  Type of Diff should be a

  ViewVC Help
Powered by ViewVC 1.1.26