/[gxemul]/trunk/src/cpus
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Log of /trunk/src/cpus

View Directory Listing Directory Listing


Sticky Revision:

Revision 59 - Directory Listing
Modified Fri Oct 12 16:26:40 2007 UTC (11 years, 9 months ago) by dpavlin
exit on memory_ppc exception

Revision 48 - Directory Listing
Modified Wed Oct 10 22:58:29 2007 UTC (11 years, 9 months ago) by dpavlin
remove CVS dirs all over

Revision 46 - Directory Listing
Modified Wed Oct 10 21:07:01 2007 UTC (11 years, 9 months ago) by dpavlin
first cut at emulating DSM G600 -- serial port work and not much else...

Revision 44 - Directory Listing
Modified Mon Oct 8 16:22:56 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1632 2007/09/11 21:46:35 debug Exp $
20070616	Implementing the MIPS32/64 revision 2 "ror" instruction.
20070617	Adding a struct for each physpage which keeps track of which
		ranges within that page (base offset, length) that are
		continuously translatable. When running with native code
		generation enabled (-b), a range is added after each read-
		ahead loop.
		Experimenting with using the physical program counter sample
		data (implemented 20070608) together with the "translatable
		range" information, to figure out which physical address ranges
		would be worth translating to native code (if the number of
		samples falling within a range is above a certain threshold).
20070618	Adding automagic building of .index comment files for
		src/file/, src/promemul/, src src/useremul/ as well.
		Adding a "has been translated" bit to the ranges, so that only
		not-yet-translated ranges will be sampled.
20070619	Moving src/cpu.c and src/memory_rw.c into src/cpus/,
		src/device.c into src/devices/, and src/machine.c into
		src/machines/.
		Creating a skeleton cc/ld native backend module; beginning on
		the function which will detect cc command line, etc.
20070620	Continuing on the native code generation infrastructure.
20070621	Moving src/x11.c and src/console.c into a new src/console/
		subdir (for everything that is console or framebuffer related).
		Moving src/symbol*.c into a new src/symbol/, which should
		contain anything that is symbol handling related.
20070624	Making the program counter sampling threshold a "settings
		variable" (sampling_threshold), i.e. it can now be changed
		during runtime.
		Switching the RELEASE notes format from plain text to HTML.
		If the TMPDIR environment variable is set, it is used instead
		of "/tmp" for temporary files.
		Continuing on the cc/ld backend: simple .c code is generated,
		the compiler and linker are called, etc.
		Adding detection of host architecture to the configure script
		(again), and adding icache invalidation support (only
		implemented for Alpha hosts so far).
20070625	Simplifying the program counter sampling mechanism.
20070626	Removing the cc/ld native code generation stuff, program
		counter sampling, etc; it would not have worked well in the
		general case.
20070627	Removing everything related to native code generation.
20070629	Removing the (practically unusable) support for multiple
		emulations. (The single emulation allowed now still supports
		multiple simultaneous machines, as before.)
		Beginning on PCCTWO and M88K interrupts.
20070723	Adding a dummy skeleton for emulation of M32R processors.
20070901	Fixing a warning found by "gcc version 4.3.0 20070817
		(experimental)" on amd64.
20070905	Removing some more traces of the old "multiple emulations"
		code.
		Also looking in /usr/local/include and /usr/local/lib for
		X11 libs, when running configure.
20070909	Minor updates to the guest OS install instructions, in
		preparation for the NetBSD 4.0 release.
20070918	More testing of NetBSD 4.0 RC1.


Revision 42 - Directory Listing
Modified Mon Oct 8 16:22:32 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1613 2007/06/15 20:11:26 debug Exp $
20070501	Continuing a little on m88k disassembly (control registers,
		more instructions).
		Adding a dummy mvme88k machine mode.
20070502	Re-adding MIPS load/store alignment exceptions.
20070503	Implementing more of the M88K disassembly code.
20070504	Adding disassembly of some more M88K load/store instructions.
		Implementing some relatively simple M88K instructions (br.n,
		xor[.u] imm, and[.u] imm).
20070505	Implementing M88K three-register and, or, xor, and jmp[.n],
		bsr[.n] including function call trace stuff.
		Applying a patch from Bruce M. Simpson which implements the
		SYSCON_BOARD_CPU_CLOCK_FREQ_ID object of the syscon call in
		the yamon PROM emulation.
20070506	Implementing M88K bb0[.n] and bb1[.n], and skeletons for
		ldcr and stcr (although no control regs are implemented yet).
20070509	Found and fixed the bug which caused Linux for QEMU_MIPS to
		stop working in 0.4.5.1: It was a faulty change to the MIPS
		'sc' and 'scd' instructions I made while going through gcc -W
		warnings on 20070428.
20070510	Updating the Linux/QEMU_MIPS section in guestoses.html to
		use mips-test-0.2.tar.gz instead of 0.1.
		A big thank you to Miod Vallat for sending me M88K manuals.
		Implementing more M88K instructions (addu, subu, div[u], mulu,
		ext[u], clr, set, cmp).
20070511	Fixing bugs in the M88K "and" and "and.u" instructions (found
		by comparing against the manual).
		Implementing more M88K instructions (mask[.u], mak, bcnd (auto-
		generated)) and some more control register details.
		Cleanup: Removing the experimental AVR emulation mode and
		corresponding devices; AVR emulation wasn't really meaningful.
		Implementing autogeneration of most M88K loads/stores. The
		rectangle drawing demo (with -O0) for M88K runs :-)
		Beginning on M88K exception handling.
		More M88K instructions: tb0, tb1, rte, sub, jsr[.n].
		Adding some skeleton MVME PROM ("BUG") emulation.
20070512	Fixing a bug in the M88K cmp instruction.
		Adding the M88K lda (scaled register) instruction.
		Fixing bugs in 64-bit (32-bit pairs) M88K loads/stores.
		Removing the unused tick_hz stuff from the machine struct.
		Implementing the M88K xmem instruction. OpenBSD/mvme88k gets
		far enough to display the Copyright banner :-)
		Implementing subu.co (guess), addu.co, addu.ci, ff0, and ff1.
		Adding a dev_mvme187, for MVME187-specific devices/registers.
		OpenBSD/mvme88k prints more boot messages. :)
20070515	Continuing on MVME187 emulation (adding more devices, beginning
		on the CMMUs, etc).
		Adding the M88K and.c, xor.c, and or.c instructions, and making
		sure that mul, div, etc cause exceptions if executed when SFD1
		is disabled.
20070517	Continuing on M88K and MVME187 emulation in general; moving
		the CMMU registers to the CPU struct, separating dev_pcc2 from
		dev_mvme187, and beginning on memory_m88k.c (BATC and PATC).
		Fixing a bug in 64-bit (32-bit pairs) M88K fast stores.
		Implementing the clock part of dev_mk48txx.
		Implementing the M88K fstcr and xcr instructions.
		Implementing m88k_cpu_tlbdump().
		Beginning on the implementation of a separate address space
		for M88K .usr loads/stores.
20070520	Removing the non-working (skeleton) Sandpoint, SonyNEWS, SHARK
		Dnard, and Zaurus machine modes.
		Experimenting with dyntrans to_be_translated read-ahead. It
		seems to give a very small performance increase for MIPS
		emulation, but a large performance degradation for SuperH. Hm.
20070522	Disabling correct SuperH ITLB emulation; it does not seem to be
		necessary in order to let SH4 guest OSes run, and it slows down
		userspace code.
		Implementing "samepage" branches for SuperH emulation, and some
		other minor speed hacks.
20070525	Continuing on M88K memory-related stuff: exceptions, memory
		transaction register contents, etc.
		Implementing the M88K subu.ci instruction.
		Removing the non-working (skeleton) Iyonix machine mode.
		OpenBSD/mvme88k reaches userland :-), starts executing
		/sbin/init's instructions, and issues a few syscalls, before
		crashing.
20070526	Fixing bugs in dev_mk48txx, so that OpenBSD/mvme88k detects
		the correct time-of-day.
		Implementing a generic IRQ controller for the test machines
		(dev_irqc), similar to a proposed patch from Petr Stepan.
		Experimenting some more with translation read-ahead.
		Adding an "expect" script for automated OpenBSD/landisk
		install regression/performance tests.
20070527	Adding a dummy mmEye (SH3) machine mode skeleton.
		FINALLY found the strange M88K bug I have been hunting: I had
		not emulated the SNIP value for exceptions occurring in
		branch delay slots correctly.
		Implementing correct exceptions for 64-bit M88K loads/stores.
		Address to symbol lookups are now disabled when M88K is
		running in usermode (because usermode addresses don't have
		anything to do with supervisor addresses).
20070531	Removing the mmEye machine mode skeleton.
20070604	Some minor code cleanup.
20070605	Moving src/useremul.c into a subdir (src/useremul/), and
		cleaning up some more legacy constructs.
		Adding -Wstrict-aliasing and -fstrict-aliasing detection to
		the configure script.
20070606	Adding a check for broken GCC on Solaris to the configure
		script. (GCC 3.4.3 on Solaris cannot handle static variables
		which are initialized to 0 or NULL. :-/)
		Removing the old (non-working) ARC emulation modes: NEC RD94,
		R94, R96, and R98, and the last traces of Olivetti M700 and
		Deskstation Tyne.
		Removing the non-working skeleton WDSC device (dev_wdsc).
20070607	Thinking about how to use the host's cc + ld at runtime to
		generate native code. (See experiments/native_cc_ld_test.i
		for an example.)
20070608	Adding a program counter sampling timer, which could be useful
		for native code generation experiments.
		The KN02_CSR_NRMMOD bit in the DECstation 5000/200 (KN02) CSR
		should always be set, to allow a 5000/200 PROM to boot.
20070609	Moving out breakpoint details from the machine struct into
		a helper struct, and removing the limit on max nr of
		breakpoints.
20070610	Moving out tick functions into a helper struct as well (which
		also gets rid of the max limit).
20070612	FINALLY figured out why Debian/DECstation stopped working when
		translation read-ahead was enabled: in src/memory_rw.c, the
		call to invalidate_code_translation was made also if the
		memory access was an instruction load (if the page was mapped
		as writable); it shouldn't be called in that case.
20070613	Implementing some more MIPS32/64 revision 2 instructions: di,
		ei, ext, dext, dextm, dextu, and ins.
20070614	Implementing an instruction combination for the NetBSD/arm
		idle loop (making the host not use any cpu if NetBSD/arm
		inside the emulator is not using any cpu).
		Increasing the nr of ARM VPH entries from 128 to 384.
20070615	Removing the ENABLE_arch stuff from the configure script, so
		that all included architectures are included in both release
		and development builds.
		Moving memory related helper functions from misc.c to memory.c.
		Adding preliminary instructions for netbooting NetBSD/pmppc to
		guestoses.html; it doesn't work yet, there are weird timeouts.
		Beginning a total rewrite of the userland emulation modes
		(removing all emulation modes, beginning from scratch with
		NetBSD/MIPS and FreeBSD/Alpha only).
20070616	After fixing a bug in the DEC21143 NIC (the TDSTAT_OWN bit was
		only cleared for the last segment when transmitting, not all
		segments), NetBSD/pmppc boots with root-on-nfs without the
		timeouts. Updating guestoses.html.
		Removing the skeleton PSP (Playstation Portable) mode.
		Moving X11-related stuff in the machine struct into a helper
		struct.
		Cleanup of out-of-memory checks, to use a new CHECK_ALLOCATION
		macro (which prints a meaningful error message).
		Adding a COMMENT to each machine and device (for automagic
		.index comment generation).
		Doing regression testing for the next release.

==============  RELEASE 0.4.6  ==============



Revision 40 - Directory Listing
Modified Mon Oct 8 16:22:11 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1539 2007/05/01 04:03:51 debug Exp $
20070415	Landisk PCLOCK should be 33.33 MHz, not 50 MHz. (This makes
		the clock run at correct speed.)
		FINALLY found and fixed the bug which caused OpenBSD/landisk
		to randomly bug out: an &-sign was missing in the special case
		handling of FPSCR in the 'LDS.L @Rm+,FPSCR' instruction.
		Adding similar special case handling for 'LDC.L @Rm+,SR'
		(calling sh_update_sr() instead of just loading).
		Implementing the 'FCNVSD FPUL,DRn' and 'FCNVDS DRm,FPUL'
		SuperH instructions.
		The 'LDC Rm,SR' instruction now immediately breaks out of the
		dyntrans loop if an interrupt is to be triggered.
20070416	In memory_rw.c, if mapping a page as writable, make sure to
		invalidate code translations even if the data access was a
		read.
		Minor SuperH updates.
20070418	Removing the dummy M68K emulation mode.
		Minor SH update (turning unnecessary sts_mach_rn, sts_macl_rn,
		and sts_pr_rn instruction handlers into mov_rm_rn).
20070419	Beginning to add a skeleton for an M88K mode: Adding a hack to
		allow OpenBSD/m88k a.out binaries to be loaded, and disassembly
		of a few simple 88K instructions.
		Commenting out the 'LDC Rm,SR' fix from a few days ago, because
		it made Linux/dreamcast bug out.
		Adding a hack to dev_sh4.c (an extra translation cache
		invalidation), which allows OpenBSD/landisk to boot ok after
		an install. Upgrading the Landisk machine mode to stable,
		updating documentation, etc.
20070420	Experimenting with adding a PCI controller (pcic) to dev_sh4.
		Adding a dummy Realtek 8139C+ skeleton device (dev_rtl8139c).
		Implementing the first M88K instructions (br, or[.u] imm), and
		adding disassembly of some more instructions.
20070421	Continuing a little on dev_rtl8139c.
20070422	Implementing the 9346 EEPROM "read" command for dev_rtl8139c.
		Finally found and fixed an old bug in the log n symbol search
		(it sometimes missed symbols). Debug trace (-i, -t etc) should
		now show more symbols. :-)
20070423	Continuing a little on M88K disassembly.
20070428	Fixing a memset arg order bug in src/net/net.c (thanks to
		Nigel Horne for noticing the bug).
		Applying parts of a patch from Carl van Schaik to clear out
		bottom bits of MIPS addresses more correctly, when using large
		page sizes, and doing some other minor cleanup/refactoring.
		Fixing a couple of warnings given by gcc with the -W option (a
		few more warnings than just plain -Wall).
		Reducing SuperH dyntrans physical address space from 64-bit to
		32-bit (since SH5/SH64 isn't imlemented yet anyway).
		Adding address-to-symbol annotation to a few more instructions
		in the SuperH instruction trace output.
		Beginning regression testing for the next release.
		Reverting the value of SCIF_DELAYED_TX_VALUE from 1 to 2,
		because OpenBSD/landisk may otherwise hang randomly.
20070429	The ugly hack/workaround to get OpenBSD/landisk booting without
		crashing does NOT work anymore (with the April 21 snapshot
		of OpenBSD/landisk). Strangely enough, removing the hack
		completely causes OpenBSD/landisk to work (!).
		More regression testing (re-testing everything SuperH-related,
		and some other things).
		Cobalt interrupts were actually broken; fixing by commenting
		out the DEC21143s in the Cobalt machine.
20070430	More regression testing.
20070501	Updating the OpenBSD/landisk install instructions to use
		4.1 instead of the current snapshot.
		GAAAH! OpenBSD/landisk 4.1 _needs_ the ugly hack/workaround;
		reintroducing it again. (The 4.1 kernel is actually from
		2007-03-11.)
		Simplifying the NetBSD/evbarm install instructions a bit.
		More regression testing.

==============  RELEASE 0.4.5.1  ==============



Revision 38 - Directory Listing
Modified Mon Oct 8 16:21:53 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1515 2007/04/14 05:39:46 debug Exp $
20070324	Adding a "--debug" option to the configure script, to disable
		optimizations in unstable development builds.
		Moving out SCSI-specific stuff from diskimage.c into a new
		diskimage_scsicmd.c.
		Applying Hĺvard Eidnes' patch for SCSICDROM_READ_DISKINFO and
		SCSICDROM_READ_TRACKINFO. (Not really tested yet.)
		Implementing disk image "overlays" (to allow simple roll-back
		to previous disk state). Adding a 'V' disk flag for this, and
		updating the man page and misc.html.
20070325	Stability fix to cpu_dyntrans.c, when multiple physical pages
		share the same initial table entry. (The ppp == NULL check
		should be physpage_ofs == 0.) Bug found by analysing GXemul
		against a version patched for Godson.
		Fixing a second occurance of the same problem (also in
		cpu_dyntrans.c).
		Fixing a MAJOR physical page leak in cpu_dyntrans.c; pages
		weren't _added_ to the set of translated pages, they _replaced_
		all previous pages. It's amazing that this bug has been able
		to live for this long. (Triggered when emulating >128MB RAM.)
20070326	Removing the GDB debugging stub support; it was too hackish
		and ugly.
20070328	Moving around some native code generation skeleton code.
20070329	The -lm check in the configure script now also checks for sin()
		in addition to sqrt(). (Thanks to Nigel Horne for noticing that
		sqrt was not enough on Fedora Core 6.) (Not verified yet.)
20070330	Fixing an indexing bug in dev_sh4.c, found by using gcc version
		4.3.0 20070323.
20070331	Some more experimentation with native code generation.
20070404	Attempting to fix some more SH4 SCIF interrupt bugs; rewriting
		the SH interrupt assertion/deassertion code somewhat.
20070410	Splitting src/file.c into separate files in src/file/.
		Cleanup: Removing the dummy TS7200, Walnut, PB1000, and
		Meshcube emulation modes, and dev_epcom and dev_au1x00.
		Removing the experimental CHIP8/RCA180x code; it wasn't really
		working much lately, anyway. It was fun while it lasted.
		Also removing the experimental Transputer CPU support.
20070412	Moving the section about how the dynamic translation system
		works from intro.html to a separate translation.html file.
		Minor SH fixes; attempting to get OpenBSD/landisk to run
		without randomly bugging out, but no success yet.
20070413	SH SCI (serial bit interface) should now work together with a
		(new) RS5C313 clock device (for Landisk emulation).
20070414	Moving Redhat/MIPS down from supported to experimental, in
		guestoses.html.
		Preparing for a new release; doing some regression testing etc.

==============  RELEASE 0.4.5  ==============



Revision 36 - Directory Listing
Modified Mon Oct 8 16:21:34 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1497 2007/03/18 03:41:36 debug Exp $
20070224	Minor update to the initialization of the ns16550 in
		machine_walnut.c, to allow that machine type to boot with the
		new interrupt system (although it is still a dummy machine).
		Adding a wdc at 0x14000000 to machine_landisk.c, and fixing
		the SCIF serial interrupts of the SH4 cpu enough to get
		NetBSD/landisk booting from a disk image :-)  Adding a
		preliminary install instruction skeleton to guestoses.html.
20070306	Adding SH-IPL+G PROM emulation, and also passing the "end"
		symbol in r5 on bootup, for Landisk emulation. This is enough
		to get OpenBSD/landisk to install :)  Adding a preliminary
		install instruction skeleton to the documentation. SuperH
		emulation is still shaky, though :-/
20070307	Fixed a strangeness in memory_sh.c (read/write was never
		returned for any page). (Unknown whether this fixes any actual
		problems, though.)
20070308	dev_ram.c fix: invalidate code translations on writes to
		RAM, emulated as separate devices. Linux/dreamcast gets
		further in the boot process than before, but still bugs out
		in userland.
		Fixing bugs in the "stc.l gbr,@-rN" and "ldc.l @rN+,gbr" SuperH 
		instructions (they should NOT check the MD bit), allowing the
		Linux/dreamcast Live CD to reach userland correctly :-)
20070310	Changing the cpu name "Alpha" in src/useremul.c to "21364" to
		unbreak userland syscall emulation of FreeBSD/Alpha binaries.
20070314	Applying a patch from Michael Yaroslavtsev which fixes the
		previous Linux lib64 patch to the configure script.
20070315	Adding a (dummy) sun4v machine type, and SPARC T1 cpu type.
20070316	Creating a new directory, src/disk, and moving diskimage.c
		to it. Separating out bootblock loading stuff from emul.c into
		new files in src/disk.
		Adding some more SPARC registers.
20070318	Preparing/testing for a minirelease, 0.4.4.1.

==============  RELEASE 0.4.4.1  ==============



Revision 34 - Directory Listing
Modified Mon Oct 8 16:21:17 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1480 2007/02/19 01:34:42 debug Exp $
20061029	Changing usleep(1) calls in the debugger to usleep(10000)
20061107	Adding a new disk image option (-d o...) which sets the ISO9660
		filesystem base offset; also making some other hacks to allow
		NetBSD/dreamcast and homebrew demos/games to boot directly
		from a filesystem image.
		Moving Dreamcast-specific stuff in the documentation to its
		own page (dreamcast.html).
		Adding a border to the Dreamcast PVR framebuffer.
20061108	Adding a -T command line option (again?), for halting the
		emulator on unimplemented memory accesses.
20061109	Continuing on various SH4 and Dreamcast related things.
		The emulator should now halt on more unimplemented device
		accesses, instead of just printing a warning, forcing me to
		actually implement missing stuff :)
20061111	Continuing on SH4 and Dreamcast stuff.
		Adding a bogus Landisk (SH4) machine mode.
20061112	Implementing some parts of the Dreamcast GDROM device. With
		some ugly hacks, NetBSD can (barely) mount an ISO image.
20061113	NetBSD/dreamcast now starts booting from the Live CD image,
		but crashes randomly quite early on in the boot process.
20061122	Beginning on a skeleton interrupt.h and interrupt.c for the
		new interrupt subsystem.
20061124	Continuing on the new interrupt system; taking the first steps
		to attempt to connect CPUs (SuperH and MIPS) and devices
		(dev_cons and SH4 timer interrupts) to it. Many things will
		probably break from now on.
20061125	Converting dev_ns16550, dev_8253 to the new interrupt system.
		Attempting to begin to convert the ISA bus.
20061130	Incorporating a patch from Brian Foley for the configure
		script, which checks for X11 libs in /usr/X11R6/lib64 (which
		is used on some Linux systems).
20061227	Adding a note in the man page about booting from Dreamcast
		CDROM images (i.e. that no external kernel is needed).
20061229	Continuing on the interrupt system rewrite: beginning to
		convert more devices, adding abort() calls for legacy interrupt
		system calls so that everything now _has_ to be rewritten!
		Almost all machine modes are now completely broken.
20061230	More progress on removing old interrupt code, mostly related
		to the ISA bus + devices, the LCA bus (on AlphaBook1), and
		the Footbridge bus (for CATS). And some minor PCI stuff.
		Connecting the ARM cpu to the new interrupt system.
		The CATS, NetWinder, and QEMU_MIPS machine modes now work with
		the new interrupt system :)
20061231	Connecting PowerPC CPUs to the new interrupt system.
		Making PReP machines (IBM 6050) work again.
		Beginning to convert the GT PCI controller (for e.g. Malta
		and Cobalt emulation). Some things work, but not everything.
		Updating Copyright notices for 2007.
20070101	Converting dev_kn02 from legacy style to devinit; the 3max
		machine mode now works with the new interrupt system :-]
20070105	Beginning to convert the SGI O2 machine to the new interrupt
		system; finally converting O2 (IP32) devices to devinit, etc.
20070106	Continuing on the interrupt system redesign/rewrite; KN01
		(PMAX), KN230, and Dreamcast ASIC interrupts should work again,
		moving out stuff from machine.h and devices.h into the
		corresponding devices, beginning the rewrite of i80321
		interrupts, etc.
20070107	Beginning on the rewrite of Eagle interrupt stuff (PReP, etc).
20070117	Beginning the rewrite of Algor (V3) interrupts (finally
		changing dev_v3 into devinit style).
20070118	Removing the "bus" registry concept from machine.h, because
		it was practically meaningless.
		Continuing on the rewrite of Algor V3 ISA interrupts.
20070121	More work on Algor interrupts; they are now working again,
		well enough to run NetBSD/algor. :-)
20070122	Converting VR41xx (HPCmips) interrupts. NetBSD/hpcmips
		can be installed using the new interrupt system :-)
20070123	Making the testmips mode work with the new interrupt system.
20070127	Beginning to convert DEC5800 devices to devinit, and to the
		new interrupt system.
		Converting Playstation 2 devices to devinit, and converting
		the interrupt system. Also fixing a severe bug: the interrupt
		mask register on Playstation 2 is bitwise _toggled_ on writes.
20070128	Removing the dummy NetGear machine mode and the 8250 device
		(which was only used by the NetGear machine).
		Beginning to convert the MacPPC GC (Grand Central) interrupt
		controller to the new interrupt system.
		Converting Jazz interrupts (PICA61 etc.) to the new interrupt
		system. NetBSD/arc can be installed again :-)
		Fixing the JAZZ timer (hardcoding it at 100 Hz, works with
		NetBSD and it is better than a completely dummy timer as it
		was before).
		Converting dev_mp to the new interrupt system, although I
		haven't had time to actually test it yet.
		Completely removing src/machines/interrupts.c, cpu_interrupt
		and cpu_interrupt_ack in src/cpu.c, and
		src/include/machine_interrupts.h! Adding fatal error messages
		+ abort() in the few places that are left to fix.
		Converting dev_z8530 to the new interrupt system.
		FINALLY removing the md_int struct completely from the
		machine struct.
		SH4 fixes (adding a PADDR invalidation in the ITLB replacement
		code in memory_sh.c); the NetBSD/dreamcast LiveCD now runs
		all the way to the login prompt, and can be interacted with :-)
		Converting the CPC700 controller (PCI and interrupt controller
		for PM/PPC) to the new interrupt system.
20070129	Fixing MACE ISA interrupts (SGI IP32 emulation). Both NetBSD/
		sgimips' and OpenBSD/sgi's ramdisk kernels can now be
		interacted with again.
20070130	Moving out the MIPS multi_lw and _sw instruction combinations
		so that they are auto-generated at compile time instead.
20070131	Adding detection of amd64/x86_64 hosts in the configure script,
		for doing initial experiments (again :-) with native code
		generation.
		Adding a -k command line option to set the size of the dyntrans
		cache, and a -B command line option to disable native code
		generation, even if GXemul was compiled with support for
		native code generation for the specific host CPU architecture.
20070201	Experimenting with a skeleton for native code generation.
		Changing the default behaviour, so that native code generation
		is now disabled by default, and has to be enabled by using
		-b on the command line.
20070202	Continuing the native code generation experiments.
		Making PCI interrupts work for Footbridge again.
20070203	More native code generation experiments.
		Removing most of the native code generation experimental code,
		it does not make sense to include any quick hacks like this.
		Minor cleanup/removal of some more legacy MIPS interrupt code.
20070204	Making i80321 interrupts work again (for NetBSD/evbarm etc.),
		and fixing the timer at 100 Hz.
20070206	Experimenting with removing the wdc interrupt slowness hack.
20070207	Lowering the number of dyntrans TLB entries for MIPS from
		192 to 128, resulting in a minor speed improvement.
		Minor optimization to the code invalidation routine in
		cpu_dyntrans.c.
20070208	Increasing (experimentally) the nr of dyntrans instructions per
		loop from 60 to 120.
20070210	Commenting out (experimentally) the dyntrans_device_danger
		detection in memory_rw.c.
		Changing the testmips and baremips machines to use a revision 2
		MIPS64 CPU by default, instead of revision 1.
		Removing the dummy i960, IA64, x86, AVR32, and HP PA-RISC
		files, the PC bios emulation, and the Olivetti M700 (ARC) and
		db64360 emulation modes.
20070211	Adding an "mp" demo to the demos directory, which tests the
		SMP functionality of the testmips machine.
		Fixing PReP interrupts some more. NetBSD/prep now boots again.
20070216	Adding a "nop workaround" for booting Mach/PMAX to the
		documentation; thanks to Artur Bujdoso for the values.
		Converting more of the MacPPC interrupt stuff to the new
		system.
		Beginning to convert BeBox interrupts to the new system.
		PPC603e should NOT have the PPC_NO_DEC flag! Removing it.
		Correcting BeBox clock speed (it was set to 100 in the NetBSD
		bootinfo block, but should be 33000000/4), allowing NetBSD
		to start without using the (incorrect) PPC_NO_DEC hack.
20070217	Implementing (slow) AltiVec vector loads and stores, allowing
		NetBSD/macppc to finally boot using the GENERIC kernel :-)
		Updating the documentation with install instructions for
		NetBSD/macppc.
20070218-19	Regression testing for the release.

==============  RELEASE 0.4.4  ==============



Revision 32 - Directory Listing
Modified Mon Oct 8 16:20:58 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1421 2006/11/06 05:32:37 debug Exp $
20060816	Adding a framework for emulated/virtual timers (src/timer.c),
		using only setitimer().
		Rewriting the mc146818 to use the new timer framework.
20060817	Adding a call to gettimeofday() every now and then (once every
		second, at the moment) to resynch the timer if it drifts.
		Beginning to convert the ISA timer interrupt mechanism (8253
		and 8259) to use the new timer framework.
		Removing the -I command line option.
20060819	Adding the -I command line option again, with new semantics.
		Working on Footbridge timer interrupts; NetBSD/NetWinder and
		NetBSD/CATS now run at correct speed, but unfortunately with
		HUGE delays during bootup.
20060821	Some minor m68k updates. Adding the first instruction: nop. :)
		Minor Alpha emulation updates.
20060822	Adding a FreeBSD development specific YAMON environment
		variable ("khz") (as suggested by Bruce M. Simpson).
		Moving YAMON environment variable initialization from
		machine_evbmips.c into promemul/yamon.c, and adding some more
		variables.
		Continuing on the LCA PCI bus controller (for Alpha machines).
20060823	Continuing on the timer stuff: experimenting with MIPS count/
		compare interrupts connected to the timer framework.
20060825	Adding bogus SCSI commands 0x51 (SCSICDROM_READ_DISCINFO) and
		0x52 (SCSICDROM_READ_TRACKINFO) to the SCSI emulation layer,
		to allow NetBSD/pmax 4.0_BETA to be installed from CDROM.
		Minor updates to the LCA PCI controller.
20060827	Implementing a CHIP8 cpu mode, and a corresponding CHIP8
		machine, for fun. Disassembly support for all instructions,
		and most of the common instructions have been implemented: mvi,
		mov_imm, add_imm, jmp, rand, cls, sprite, skeq_imm, jsr,
		skne_imm, bcd, rts, ldr, str, mov, or, and, xor, add, sub,
		font, ssound, sdelay, gdelay, bogus skup/skpr, skeq, skne.
20060828	Beginning to convert the CHIP8 cpu in the CHIP8 machine to a
		(more correct) RCA 180x cpu. (Disassembly for all 1802
		instructions has been implemented, but no execution yet, and
		no 1805 extended instructions.)
20060829	Minor Alpha emulation updates.
20060830	Beginning to experiment a little with PCI IDE for SGI O2.
		Fixing the cursor key mappings for MobilePro 770 emulation.
		Fixing the LK201 warning caused by recent NetBSD/pmax.
		The MIPS R41xx standby, suspend, and hibernate instructions now
		behave like the RM52xx/MIPS32/MIPS64 wait instruction.
		Fixing dev_wdc so it calculates correct (64-bit) offsets before
		giving them to diskimage_access().
20060831	Continuing on Alpha emulation (OSF1 PALcode).
20060901	Minor Alpha updates; beginning on virtual memory pagetables.
		Removed the limit for max nr of devices (in preparation for
		allowing devices' base addresses to be changed during runtime).
		Adding a hack for MIPS [d]mfc0 select 0 (except the count
		register), so that the coproc register is simply copied.
		The MIPS suspend instruction now exits the emulator, instead
		of being treated as a wait instruction (this causes NetBSD/
		hpcmips to get correct 'halt' behavior).
		The VR41xx RTC now returns correct time.
		Connecting the VR41xx timer to the timer framework (fixed at
		128 Hz, for now).
		Continuing on SPARC emulation, adding more instructions:
		restore, ba_xcc, ble. The rectangle drawing demo works :)
		Removing the last traces of the old ENABLE_CACHE_EMULATION
		MIPS stuff (not usable with dyntrans anyway).
20060902	Splitting up src/net.c into several smaller files in its own
		subdirectory (src/net/).
20060903	Cleanup of the files in src/net/, to make them less ugly.
20060904	Continuing on the 'settings' subsystem.
		Minor progress on the SPARC emulation mode.
20060905	Cleanup of various things, and connecting the settings
		infrastructure to various subsystems (emul, machine, cpu, etc).
		Changing the lk201 mouse update routine to not rely on any
		emulated hardware framebuffer cursor coordinates, but instead
		always do (semi-usable) relative movements.
20060906	Continuing on the lk201 mouse stuff. Mouse behaviour with
		multiple framebuffers (which was working in Ultrix) is now
		semi-broken (but it still works, in a way).
		Moving the documentation about networking into its own file
		(networking.html), and refreshing it a bit. Adding an example
		of how to use ethernet frame direct-access (udp_snoop).
20060907	Continuing on the settings infrastructure.
20060908	Minor updates to SH emulation: for 32-bit emulation: delay
		slots and the 'jsr @Rn' instruction. I'm putting 64-bit SH5 on
		ice, for now.
20060909-10	Implementing some more 32-bit SH instructions. Removing the
		64-bit mode completely. Enough has now been implemented to run
		the rectangle drawing demo. :-)
20060912	Adding more SH instructions.
20060916	Continuing on SH emulation (some more instructions: div0u,
		div1, rotcl/rotcr, more mov instructions, dt, braf, sets, sett,
		tst_imm, dmuls.l, subc, ldc_rm_vbr, movt, clrt, clrs, clrmac).
		Continuing on the settings subsystem (beginning on reading/
		writing settings, removing bugs, and connecting more cpus to
		the framework).
20060919	More work on SH emulation; adding an ldc banked instruction,
		and attaching a 640x480 framebuffer to the Dreamcast machine
		mode (NetBSD/dreamcast prints the NetBSD copyright banner :-),
		and then panics).
20060920	Continuing on the settings subsystem.
20060921	Fixing the Footbridge timer stuff so that NetBSD/cats and
		NetBSD/netwinder boot up without the delays.
20060922	Temporarily hardcoding MIPS timer interrupt to 100 Hz. With
		'wait' support disabled, NetBSD/malta and Linux/malta run at
		correct speed.
20060923	Connecting dev_gt to the timer framework, so that NetBSD/cobalt
		runs at correct speed.
		Moving SH4-specific memory mapped registers into its own
		device (dev_sh4.c).
		Running with -N now prints "idling" instead of bogus nr of
		instrs/second (which isn't valid anyway) while idling.
20060924	Algor emulation should now run at correct speed.
		Adding disassembly support for some MIPS64 revision 2
		instructions: ext, dext, dextm, dextu.
20060926	The timer framework now works also when the MIPS wait
		instruction is used.
20060928	Re-implementing checks for coprocessor availability for MIPS
		cop0 instructions. (Thanks to Carl van Schaik for noticing the
		lack of cop0 availability checks.)
20060929	Implementing an instruction combination hack which treats
		NetBSD/pmax' idle loop as a wait-like instruction.
20060930	The ENTRYHI_R_MASK was missing in (at least) memory_mips_v2p.c,
		causing TLB lookups to sometimes succeed when they should have
		failed. (A big thank you to Juli Mallett for noticing the
		problem.)
		Adding disassembly support for more MIPS64 revision 2 opcodes
		(seb, seh, wsbh, jalr.hb, jr.hb, synci, ins, dins, dinsu,
		dinsm, dsbh, dshd, ror, dror, rorv, drorv, dror32). Also
		implementing seb, seh, dsbh, dshd, and wsbh.
		Implementing an instruction combination hack for Linux/pmax'
		idle loop, similar to the NetBSD/pmax case.
20061001	Changing the NetBSD/sgimips install instructions to extract
		files from an iso image, instead of downloading them via ftp.
20061002	More-than-31-bit userland addresses in memory_mips_v2p.c were
		not actually working; applying a fix from Carl van Schaik to
		enable them to work + making some other updates (adding kuseg
		support).
		Fixing hpcmips (vr41xx) timer initialization.
		Experimenting with O(n)->O(1) reduction in the MIPS TLB lookup
		loop. Seems to work both for R3000 and non-R3000.
20061003	Continuing a little on SH emulation (adding more control
		registers; mini-cleanup of memory_sh.c).
20061004	Beginning on a dev_rtc, a clock/timer device for the test
		machines; also adding a demo, and some documentation.
		Fixing a bug in SH "mov.w @(disp,pc),Rn" (the result wasn't
		sign-extended), and adding the addc and ldtlb instructions.
20061005	Contining on SH emulation: virtual to physical address
		translation, and a skeleton exception mechanism.
20061006	Adding more SH instructions (various loads and stores, rte,
		negc, muls.w, various privileged register-move instructions).
20061007	More SH instructions: various move instructions, trapa, div0s,
		float, fdiv, ftrc.
		Continuing on dev_rtc; removing the rtc demo.
20061008	Adding a dummy Dreamcast PROM module. (Homebrew Dreamcast
		programs using KOS libs need this.)
		Adding more SH instructions: "stc vbr,rn", rotl, rotr, fsca,
		fmul, fadd, various floating-point moves, etc. A 256-byte
		demo for Dreamcast runs :-)
20061012	Adding the SH "lds Rm,pr" and bsr instructions.
20061013	More SH instructions: "sts fpscr,rn", tas.b, and some more
		floating point instructions, cmp/str, and more moves.
		Adding a dummy dev_pvr (Dreamcast graphics controller).
20061014	Generalizing the expression evaluator (used in the built-in
		debugger) to support parentheses and +-*/%^&|.
20061015	Removing the experimental tlb index hint code in
		mips_memory_v2p.c, since it didn't really have any effect.
20061017	Minor SH updates; adding the "sts pr,Rn", fcmp/gt, fneg,
		frchg, and some other instructions. Fixing missing sign-
		extension in an 8-bit load instruction.
20061019	Adding a simple dev_dreamcast_rtc.
		Implementing memory-mapped access to the SH ITLB/UTLB arrays.
20061021	Continuing on various SH and Dreamcast things: sh4 timers,
		debug messages for dev_pvr, fixing some virtual address
		translation bugs, adding the bsrf instruction.
		The NetBSD/dreamcast GENERIC_MD kernel now reaches userland :)
		Adding a dummy dev_dreamcast_asic.c (not really useful yet).
		Implementing simple support for Store Queues.
		Beginning on the PVR Tile Accelerator.
20061022	Generalizing the PVR framebuffer to support off-screen drawing,
		multiple bit-depths, etc. (A small speed penalty, but most
		likely worth it.)
		Adding more SH instructions (mulu.w, fcmp/eq, fsub, fmac,
		fschg, and some more); correcting bugs in "fsca" and "float".
20061024	Adding the SH ftrv (matrix * vector) instruction. Marcus
		Comstedt's "tatest" example runs :) (wireframe only).
		Correcting disassembly for SH floating point instructions that
		use the xd* registers.
		Adding the SH fsts instruction.
		In memory_device_dyntrans_access(), only the currently used
		range is now invalidated, and not the entire device range.
20061025	Adding a dummy AVR32 cpu mode skeleton.
20061026	Various Dreamcast updates; beginning on a Maple bus controller.
20061027	Continuing on the Maple bus. A bogus Controller, Keyboard, and
		Mouse can now be detected by NetBSD and KOS homebrew programs.
		Cleaning up the SH4 Timer Management Unit, and beginning on
		SH4 interrupts.
		Implementing the Dreamcast SYSASIC.
20061028	Continuing on the SYSASIC.
		Adding the SH fsqrt instruction.
		memory_sh.c now actually scans the ITLB.
		Fixing a bug in dev_sh4.c, related to associative writes into
		the memory-mapped UTLB array. NetBSD/dreamcast now reaches
		userland stably, and prints the "Terminal type?" message :-]
		Implementing enough of the Dreamcast keyboard to make NetBSD
		accept it for input.
		Enabling SuperH for stable (non-development) builds.
		Adding NetBSD/dreamcast to the documentation, although it
		doesn't support root-on-nfs yet.
20061029	Changing usleep(1) calls in the debugger to to usleep(10000)
		(according to Brian Foley, this makes GXemul run better on
		MacOS X).
		Making the Maple "Controller" do something (enough to barely
		interact with dcircus.elf).
20061030-31	Some progress on the PVR. More test programs start running (but
		with strange output).
		Various other SH4-related updates.
20061102	Various Dreamcast and SH4 updates; more KOS demos run now.
20061104	Adding a skeleton dev_mb8696x.c (the Dreamcast's LAN adapter).
20061105	Continuing on the MB8696x; NetBSD/dreamcast detects it as mbe0.
		Testing for the release.

==============  RELEASE 0.4.3  ==============



Revision 30 - Directory Listing
Modified Mon Oct 8 16:20:40 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1325 2006/08/15 15:38:37 debug Exp $
20060723	More Transputer instructions (pfix, nfix, opr, mint, ldl, ldlp,
		eqc, rev, ajw, stl, stlf, sthf, sub, ldnl, ldnlp, ldpi, move,
		wcnt, add, bcnt).
		Adding more SPARC instructions (andcc, addcc, bl, rdpr).
		Progress on the igsfb framebuffer used by NetBSD/netwinder.
		Enabling 8-bit fills in dev_fb.
		NetBSD/netwinder 3.0.1 can now run from a disk image :-)
20060724	Cleanup/performance fix for 64-bit virtual translation table
		updates (by removing the "timestamp" stuff). A full NetBSD/pmax
		3.0.1 install for R4400 has dropped from 667 seconds to 584 :)
		Fixing the igsfb "almost vga" color (it is 24-bit, not 18-bit).
		Adding some MIPS instruction combinations (3*lw, and 3*addu).
		The 8048 keyboard now turns off interrupt enable between the
		KBR_ACK and the KBR_RSTDONE, to work better with Linux 2.6.
		Not causing PPC DEC interrupts if PPC_NO_DEC is set for a
		specific CPU; NetBSD/bebox gets slightly further than before.
		Adding some more SPARC instructions: branches, udiv.
20060725	Refreshing dev_pckbc.c a little.
		Cleanups for the SH emulation mode, and adding the first
		"compact" (16-bit) instructions: various simple movs, nop,
		shll, stc, or, ldc.
20060726	Adding dummy "pcn" (AMD PCnet NIC) PCI glue.
20060727	Various cleanups; removing stuff from cpu.h, such as
		running_translated (not really meaningful anymore), and
		page flags (breaking into the debugger clears all translations
		anyway).
		Minor MIPS instruction combination updates.
20060807	Expanding the 3*sw and 3*lw MIPS instruction combinations to
		work with 2* and 4* too, resulting in a minor performance gain.
		Implementing a usleep hack for the RM52xx/MIPS32/MIPS64 "wait"
		instruction (when emulating 1 cpu).
20060808	Experimenting with some more MIPS instruction combinations.
		Implementing support for showing a (hardcoded 12x22) text
		cursor in igsfb.
20060809	Simplifying the NetBSD/evbmips (Malta) install instructions
		somewhat (by using a NetBSD/pmax ramdisk install kernel).
20060812	Experimenting more with the MIPS 'wait' instruction.
		PCI configuration register writes can now be handled, which
		allow PCI IDE controllers to work with NetBSD/Malta 3.0.1 and
		NetBSD/cobalt 3.0.1. (Previously only NetBSD 2.1 worked.)
20060813	Updating dev_gt.c based on numbers from Alec Voropay, to enable
		Linux 2.6 to use PCI on Malta.
		Continuing on Algor interrupt stuff.
20060814	Adding support for routing ISA interrupts to two different
		interrupts, making it possible to run NetBSD/algor :-)
20060814-15	Testing for the release.

==============  RELEASE 0.4.2  ==============



Revision 28 - Directory Listing
Modified Mon Oct 8 16:20:26 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1298 2006/07/22 11:27:46 debug Exp $
20060626	Continuing on SPARC emulation (beginning on the 'save'
		instruction, register windows, etc).
20060629	Planning statistics gathering (new -s command line option),
		and renaming speed_tricks to allow_instruction_combinations.
20060630	Some minor manual page updates.
		Various cleanups.
		Implementing the -s command line option.
20060701	FINALLY found the bug which prevented Linux and Ultrix from
		running without the ugly hack in the R2000/R3000 cache isol
		code; it was the phystranslation hint array which was buggy.
		Removing the phystranslation hint code completely, for now.
20060702	Minor dyntrans cleanups; invalidation of physpages now only
		invalidate those parts of a page that have actually been
		translated. (32 parts per page.)
		Some MIPS non-R3000 speed fixes.
		Experimenting with MIPS instruction combination for some
		addiu+bne+sw loops, and sw+sw+sw.
		Adding support (again) for larger-than-4KB pages in MIPS tlbw*.
		Continuing on SPARC emulation: adding load/store instructions.
20060704	Fixing a virtual vs physical page shift bug in the new tlbw*
		implementation. Problem noticed by Jakub Jermar. (Many thanks.)
		Moving rfe and eret to cpu_mips_instr.c, since that is the
		only place that uses them nowadays.
20060705	Removing the BSD license from the "testmachine" include files,
		placing them in the public domain instead; this enables the
		testmachine stuff to be used from projects which are
		incompatible with the BSD license for some reason.
20060707	Adding instruction combinations for the R2000/R3000 L1
		I-cache invalidation code used by NetBSD/pmax 3.0, lui+addiu,
		various branches followed by addiu or nop, and jr ra followed
		by addiu. The time it takes to perform a full NetBSD/pmax R3000
		install on the laptop has dropped from 573 seconds to 539. :-)
20060708	Adding a framebuffer controller device (dev_fbctrl), which so
		far can be used to change the fb resolution during runtime, but
		in the future will also be useful for accelerated block fill/
		copy, and possibly also simplified character output.
		Adding an instruction combination for NetBSD/pmax' strlen.
20060709	Minor fixes: reading raw files in src/file.c wasn't memblock
		aligned, removing buggy multi_sw MIPS instruction combination,
		etc.
20060711	Adding a machine_qemu.c, which contains a "qemu_mips" machine.
		(It mimics QEMU's MIPS machine mode, so that a test kernel
		made for QEMU_MIPS also can run in GXemul... at least to some
		extent.)  Adding a short section about how to run this mode to
		doc/guestoses.html.
20060714	Misc. minor code cleanups.
20060715	Applying a patch which adds getchar() to promemul/yamon.c
		(from Oleksandr Tymoshenko).
		Adding yamon.h from NetBSD, and rewriting yamon.c to use it
		(instead of ugly hardcoded numbers) + some cleanup.
20060716	Found and fixed the bug which broke single-stepping of 64-bit
		programs between 0.4.0 and 0.4.0.1 (caused by too quick
		refactoring and no testing). Hopefully this fix will not
		break too many other things.
20060718	Continuing on the 8253 PIT; it now works with Linux/QEMU_MIPS.
		Re-adding the sw+sw+sw instr comb (the problem was that I had
		ignored endian issues); however, it doesn't seem to give any
		big performance gain.
20060720	Adding a dummy Transputer mode (T414, T800 etc) skeleton (only
		the 'j' and 'ldc' instructions are implemented so far). :-}
20060721	Adding gtreg.h from NetBSD, updating dev_gt.c to use it, plus
		misc. other updates to get Linux 2.6 for evbmips/malta working
		(thanks to Alec Voropay for the details).
		FINALLY found and fixed the bug which made tlbw* for non-R3000
		buggy; it was a reference count problem in the dyntrans core.
20060722	Testing stuff; things seem stable enough for a new release.

==============  RELEASE 0.4.1  ==============



Revision 26 - Directory Listing
Modified Mon Oct 8 16:20:10 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1264 2006/06/25 11:08:04 debug Exp $
20060624	Replacing the error-prone machine type initialization stuff
		with something more reasonable.
		Finally removing the old "cpu_run" kludge; moving around stuff
		in machine.c and emul.c to better suit the dyntrans system.
		Various minor dyntrans cleanups (renaming translate_address to
		translate_v2p, and experimenting with template physpages).
20060625	Removing the speed hack which separated the vph entries into
		two halves (code vs data); things seem a lot more stable now.
		Minor performance hack: R2000/R3000 cache isolation now only
		clears address translations when going into isolation, not
		when going out of it.
		Fixing the MIPS interrupt problems by letting mtc0 immediately
		cause interrupts.

==============  RELEASE 0.4.0.1  ==============



Revision 24 - Directory Listing
Modified Mon Oct 8 16:19:56 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1256 2006/06/23 20:43:44 debug Exp $
20060219	Various minor updates. Removing the old MIPS16 skeleton code,
		because it will need to be rewritten for dyntrans anyway.
20060220-22	Removing the non-working dyntrans backend support.
		Continuing on the 64-bit dyntrans virtual memory generalization.
20060223	More work on the 64-bit vm generalization.
20060225	Beginning on MIPS dyntrans load/store instructions.
		Minor PPC updates (64-bit load/store, etc).
		Fixes for the variable-instruction-length framework, some
		minor AVR updates (a simple Hello World program works!).
		Beginning on a skeleton for automatically generating documen-
		tation (for devices etc.).
20060226	PPC updates (adding some more 64-bit instructions, etc).
		AVR updates (more instructions).
		FINALLY found and fixed the zs bug, making NetBSD/macppc
		accept the serial console.
20060301	Adding more AVR instructions.
20060304	Continuing on AVR-related stuff. Beginning on a framework for
		cycle-accurate device emulation. Adding an experimental "PAL
		TV" device (just a dummy so far).
20060305	Adding more AVR instructions.
		Adding a dummy epcom serial controller (for TS7200 emulation).
20060310	Removing the emul() command from configuration files, so only
		net() and machine() are supported.
		Minor progress on the MIPS dyntrans rewrite.
20060311	Continuing on the MIPS dyntrans rewrite (adding more
		instructions, etc).
20060315	Adding more instructions (sllv, srav, srlv, bgtz[l], blez[l],
		beql, bnel, slti[u], various loads and stores).
20060316	Removing the ALWAYS_SIGNEXTEND_32 option, since it was rarely
		used.
		Adding more MIPS dyntrans instructions, and fixing bugs.
20060318	Implementing fast loads/stores for MIPS dyntrans (big/little
		endian, 32-bit and 64-bit modes).
20060320	Making MIPS dyntrans the default configure option; use
		"--enable-oldmips" to use the old bintrans system.
		Adding MIPS dyntrans dmult[u]; minor updates.
20060322	Continuing... adding some more instructions.
		Adding a simple skeleton for demangling C++ "_ZN" symbols.
20060323	Moving src/debugger.c into a new directory (src/debugger/).
20060324	Fixing the hack used to load PPC ELFs (useful for relocated
		Linux/ppc kernels), and adding a dummy G3 machine mode.
20060325-26	Beginning to experiment with GDB remote serial protocol
		connections; adding a -G command line option for selecting
		which TCP port to listen to.
20060330	Beginning a major cleanup to replace things like "0x%016llx"
		with more correct "0x%016"PRIx64, etc.
		Continuing on the GDB remote serial protocol support.
20060331	More cleanup, and some minor GDB remote progress.
20060402	Adding a hack to the configure script, to allow compilation
		on systems that lack PRIx64 etc.
20060406	Removing the temporary FreeBSD/arm hack in dev_ns16550.c and
		replacing it with a better fix from Olivier Houchard.
20060407	A remote debugger (gdb or ddd) can now start and stop the
		emulator using the GDB remote serial protocol, and registers
		and memory can be read. MIPS only for now.
20060408	More GDB progress: single-stepping also works, and also adding
		support for ARM, PowerPC, and Alpha targets.
		Continuing on the delay-slot-across-page-boundary issue.
20060412	Minor update: beginning to add support for the SPARC target
		to the remote GDB functionality.
20060414	Various MIPS updates: adding more instructions for dyntrans
		(eret, add), and making some exceptions work. Fixing a bug
		in dmult[u].
		Implementing the first SPARC instructions (sethi, or).
20060415	Adding "magic trap" instructions so that PROM calls can be
		software emulated in MIPS dyntrans.
		Adding more MIPS dyntrans instructions (ddiv, dadd) and
		fixing another bug in dmult.
20060416	More MIPS dyntrans progress: adding [d]addi, movn, movz, dsllv,
		rfi, an ugly hack for supporting R2000/R3000 style faked caches,
		preliminary interrupt support, and various other updates and
		bugfixes.
20060417	Adding more SPARC instructions (add, sub, sll[x], sra[x],
		srl[x]), and useful SPARC header definitions.
		Adding the first (trivial) x86/AMD64 dyntrans instructions (nop,
		cli/sti, stc/clc, std/cld, simple mov, inc ax). Various other
		x86 updates related to variable instruction length stuff.
		Adding unaligned loads/stores to the MIPS dyntrans mode (but
		still using the pre-dyntrans (slow) imlementation).
20060419	Fixing a MIPS dyntrans exception-in-delay-slot bug.
		Removing the old "show opcode statistics" functionality, since
		it wasn't really useful and isn't implemented for dyntrans.
		Single-stepping (or running with instruction trace) now looks
		ok with dyntrans with delay-slot architectures.
20060420	Minor hacks (removing the -B command line option when compiled
		for non-bintrans, and some other very minor updates).
		Adding (slow) MIPS dyntrans load-linked/store-conditional.
20060422	Applying fixes for bugs discovered by Nils Weller's nwcc
		(static DEC memmap => now per machine, and adding an extern
		keyword in cpu_arm_instr.c).
		Finally found one of the MIPS dyntrans bugs that I've been
		looking for (copy/paste spelling error BIG vs LITTLE endian in
		cpu_mips_instr_loadstore.c for 16-bit fast stores).
		FINALLY found the major MIPS dyntrans bug: slti vs sltiu
		signed/unsigned code in cpu_mips_instr.c. :-)
		Adding more MIPS dyntrans instructions (lwc1, swc1, bgezal[l],
		ctc1, tlt[u], tge[u], tne, beginning on rdhwr).
		NetBSD/hpcmips can now reach userland when using dyntrans :-)
		Adding some more x86 dyntrans instructions.
		Finally removed the old Alpha-specific virtual memory code,
		and replaced it with the generic 64-bit version.
		Beginning to add disassembly support for SPECIAL3 MIPS opcodes.
20060423	Continuing on the delay-slot-across-page-boundary issue;
		adding an end_of_page2 ic slot (like I had planned before, but
		had removed for some reason).
		Adding a quick-and-dirty fallback to legacy coprocessor 1
		code (i.e. skipping dyntrans implementation for now).
		NetBSD/hpcmips and NetBSD/pmax (when running on an emulated
		R4400) can now be installed and run. :-)  (Many bugs left
		to fix, though.)
		Adding more MIPS dyntrans instructions: madd[u], msub[u].
		Cleaning up the SPECIAL2 vs R5900/TX79/C790 "MMI" opcode
		maps somewhat (disassembly and dyntrans instruction decoding).
20060424	Adding an isa_revision field to mips_cpu_types.h, and making
		sure that SPECIAL3 opcodes cause Reserved Instruction
		exceptions on MIPS32/64 revisions lower than 2.
		Adding the SPARC 'ba', 'call', 'jmpl/retl', 'and', and 'xor'
		instructions.
20060425	Removing the -m command line option ("run at most x 
		instructions") and -T ("single_step_on_bad_addr"), because
		they never worked correctly with dyntrans anyway.
		Freshening up the man page.
20060428	Adding more MIPS dyntrans instructions: bltzal[l], idle.
		Enabling MIPS dyntrans compare interrupts.
20060429	FINALLY found the weird dyntrans bug, causing NetBSD etc. to
		behave strangely: some floating point code (conditional
		coprocessor branches) could not be reused from the old
		non-dyntrans code. The "quick-and-dirty fallback" only appeared
		to work. Fixing by implementing bc1* for MIPS dyntrans.
		More MIPS instructions: [d]sub, sdc1, ldc1, dmtc1, dmfc1, cfc0.
		Freshening up MIPS floating point disassembly appearance.
20060430	Continuing on C790/R5900/TX79 disassembly; implementing 128-bit
		"por" and "pextlw".
20060504	Disabling -u (userland emulation) unless compiled as unstable
		development version.
		Beginning on freshening up the testmachine include files,
		to make it easier to reuse those files (placing them in
		src/include/testmachine/), and beginning on a set of "demos"
		or "tutorials" for the testmachine functionality.
		Minor updates to the MIPS GDB remote protocol stub.
		Refreshing doc/experiments.html and gdb_remote.html.
		Enabling Alpha emulation in the stable release configuration,
		even though no guest OSes for Alpha can run yet.
20060505	Adding a generic 'settings' object, which will contain
		references to settable variables (which will later be possible
		to access using the debugger).
20060506	Updating dev_disk and corresponding demo/documentation (and
		switching from SCSI to IDE disk types, so it actually works
		with current test machines :-).
20060510	Adding a -D_LARGEFILE_SOURCE hack for 64-bit Linux hosts,
		so that fseeko() doesn't give a warning.
		Updating the section about how dyntrans works (the "runnable
		IR") in doc/intro.html.
		Instruction updates (some x64=1 checks, some more R5900
		dyntrans stuff: better mul/mult separation from MIPS32/64,
		adding ei and di).
		Updating MIPS cpuregs.h to a newer one (from NetBSD).
		Adding more MIPS dyntrans instructions: deret, ehb.
20060514	Adding disassembly and beginning implementation of SPARC wr
		and wrpr instructions.
20060515	Adding a SUN SPARC machine mode, with dummy SS20 and Ultra1
		machines. Adding the 32-bit "rd psr" instruction.
20060517	Disassembly support for the general SPARC rd instruction.
		Partial implementation of the cmp (subcc) instruction.
		Some other minor updates (making sure that R5900 processors
		start up with the EIE bit enabled, otherwise Linux/playstation2
		receives no interrupts).
20060519	Minor MIPS updates/cleanups.
20060521	Moving the MeshCube machine into evbmips; this seems to work
		reasonably well with a snapshot of a NetBSD MeshCube kernel.
		Cleanup/fix of MIPS config0 register initialization.
20060529	Minor MIPS fixes, including a sign-extension fix to the
		unaligned load/store code, which makes NetBSD/pmax on R3000
		work better with dyntrans. (Ultrix and Linux/DECstation still
		don't work, though.)
20060530	Minor updates to the Alpha machine mode: adding an AlphaBook
		mode, an LCA bus (forwarding accesses to an ISA bus), etc.
20060531	Applying a bugfix for the MIPS dyntrans sc[d] instruction from
		Ondrej Palkovsky. (Many thanks.)
20060601	Minifix to allow ARM immediate msr instruction to not give
		an error for some valid values.
		More Alpha updates.
20060602	Some minor Alpha updates.
20060603	Adding the Alpha cmpbge instruction. NetBSD/alpha prints its
		first boot messages :-) on an emulated Alphabook 1.
20060612	Minor updates; adding a dev_ether.h include file for the
		testmachine ether device. Continuing the hunt for the dyntrans
		bug which makes Linux and Ultrix on DECstation behave
		strangely... FINALLY found it! It seems to be related to
		invalidation of the translation cache, on tlbw{r,i}. There
		also seems to be some remaining interrupt-related problems.
20060614	Correcting the implementation of ldc1/sdc1 for MIPS dyntrans
		(so that it uses 16 32-bit registers if the FR bit in the
		status register is not set).
20060616	REMOVING BINTRANS COMPLETELY!
		Removing the old MIPS interpretation mode.
		Removing the MFHILO_DELAY and instruction delay stuff, because
		they wouldn't work with dyntrans anyway.
20060617	Some documentation updates (adding "NetBSD-archive" to some
		URLs, and new Debian/DECstation installation screenshots).
		Removing the "tracenull" and "enable-caches" configure options.
		Improving MIPS dyntrans performance somewhat (only invalidate
		translations if necessary, on writes to the entryhi register,
		instead of doing it for all cop0 writes).
20060618	More cleanup after the removal of the old MIPS emulation.
		Trying to fix the MIPS dyntrans performance bugs/bottlenecks;
		only semi-successful so far (for R3000).
20060620	Minor update to allow clean compilation again on Tru64/Alpha.
20060622	MIPS cleanup and fixes (removing the pc_last stuff, which
		doesn't make sense with dyntrans anyway, and fixing a cross-
		page-delay-slot-with-exception case in end_of_page).
		Removing the old max_random_cycles_per_chunk stuff, and the
		concept of cycles vs instructions for MIPS emulation.
		FINALLY found and fixed the bug which caused NetBSD/pmax
		clocks to behave strangely (it was a load to the zero register,
		which was treated as a NOP; now it is treated as a load to a
		dummy scratch register).
20060623	Increasing the dyntrans chunk size back to
		N_SAFE_DYNTRANS_LIMIT, instead of N_SAFE_DYNTRANS_LIMIT/2.
		Preparing for a quick release, even though there are known
		bugs, and performance for non-R3000 MIPS emulation is very
		poor. :-/
		Reverting to half the dyntrans chunk size again, because
		NetBSD/cats seemed less stable with full size chunks. :(
		NetBSD/sgimips 3.0 can now run :-)  (With release 0.3.8, only
		NetBSD/sgimips 2.1 worked, not 3.0.)

==============  RELEASE 0.4.0  ==============



Revision 22 - Directory Listing
Modified Mon Oct 8 16:19:37 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1121 2006/02/18 21:03:08 debug Exp $
20051126	Cobalt and PReP now work with the 21143 NIC.
		Continuing on Alpha dyntrans things.
		Fixing some more left-shift-by-24 to unsigned.
20051127	Working on OpenFirmware emulation; major cleanup/redesign.
		Progress on MacPPC emulation: NetBSD detects two CPUs (when
		running with -n 2), framebuffer output (for text) works.
		Adding quick-hack Bandit PCI controller and "gc" interrupt
		controller for MacPPC.
20051128	Changing from a Bandit to a Uni-North controller for macppc.
		Continuing on OpenFirmware and MacPPC emulation in general
		(obio controller, and wdc attached to the obio seems to work).
20051129	More work on MacPPC emulation (adding a dummy ADB controller).
		Continuing the PCI bus cleanup (endianness and tag composition)
		and rewriting all PCI controllers' access functions.
20051130	Various minor PPC dyntrans optimizations.
		Manually inlining some parts of the framebuffer redraw routine.
		Slowly beginning the conversion of the old MIPS emulation into
		dyntrans (but this will take quite some time to get right).
		Generalizing quick_pc_to_pointers.
20051201	Documentation update (David Muse has made available a kernel
		which simplifies Debian/DECstation installation).
		Continuing on the ADB bus controller.
20051202	Beginning a rewrite of the Zilog serial controller (dev_zs).
20051203	Continuing on the zs rewrite (now called dev_z8530); conversion
		to devinit style.
		Reworking some of the input-only vs output-only vs input-output
		details of src/console.c, better warning messages, and adding
		a debug dump.
		Removing the concept of "device state"; it wasn't really used.
		Changing some debug output (-vv should now be used to show all
		details about devices and busses; not shown during normal
		startup anymore).
		Beginning on some SPARC instruction disassembly support.
20051204	Minor PPC updates (WALNUT skeleton stuff).
		Continuing on the MIPS dyntrans rewrite.
		More progress on the ADB controller (a keyboard is "detected"
		by NetBSD and OpenBSD).
		Downgrading OpenBSD/arc as a guest OS from "working" to
		"almost working" in the documentation.
		Progress on Algor emulation ("v3" PCI controller).
20051205	Minor updates.
20051207	Sorting devices according to address; this reduces complexity
		of device lookups from O(n) to O(log n) in memory_rw (but no
		real performance increase (yet) in experiments).
20051210	Beginning the work on native dyntrans backends (by making a
		simple skeleton; so far only for Alpha hosts).
20051211	Some very minor SPARC updates.
20051215	Fixing a bug in the MIPS mul (note: not mult) instruction,
		so it also works with non-64-bit emulation. (Thanks to Alec
		Voropay for noticing the problem.)
20051216	More work on the fake/empty/simple/skeleton/whatever backend;
		performance doesn't increase, so this isn't really worth it,
		but it was probably worth it to prepare for a real backend
		later.
20051219	More instr call statistics gathering and analysis stuff.
20051220	Another fix for MIPS 'mul'. Also converting mul and {d,}cl{o,z}
		to dyntrans.
		memory_ppc.c syntax error fix (noticed by Peter Valchev).
		Beginning to move out machines from src/machine.c into
		individual files in src/machines (in a way similar to the
		autodev system for devices).
20051222	Updating the documentation regarding NetBSD/pmax 3.0.
20051223	- " - NetBSD/cats 3.0.
20051225	- " - NetBSD/hpcmips 3.0.
20051226	Continuing on the machine registry redesign.
		Adding support for ARM rrx (33-bit rotate).
		Fixing some signed/unsigned issues (exposed by gcc -W).
20051227	Fixing the bug which prevented a NetBSD/prep 3.0 install kernel
		from starting (triggered when an mtmsr was the last instruction
		on a page). Unfortunately not enough to get the kernel to run
		as well as the 2.1 kernels did.
20051230	Some dyntrans refactoring.
20051231	Continuing on the machine registry redesign.
20060101-10	Continuing... moving more machines. Moving MD interrupt stuff
		from machine.c into a new src/machines/interrupts.c.
20060114	Adding various mvmeppc machine skeletons.
20060115	Continuing on mvme* stuff. NetBSD/mvmeppc prints boot messages
		(for MVME1600) and reaches the root device prompt, but no
		specific hardware devices are emulated yet.
20060116	Minor updates to the mvme1600 emulation mode; the Eagle PCI bus
		seems to work without much modification, and a 21143 can be
		detected, interrupts might work (but untested so far).
		Adding a fake MK48Txx (mkclock) device, for NetBSD/mvmeppc.
20060121	Adding an aux control register for ARM. (A BIG thank you to
		Olivier Houchard for tracking down this bug.)
20060122	Adding more ARM instructions (smulXY), and dev_iq80321_7seg.
20060124	Adding disassembly of more ARM instructions (mia*, mra/mar),
		and some semi-bogus XScale and i80321 registers.
20060201-02	Various minor updates. Moving the last machines out of
		machine.c.
20060204	Adding a -c command line option, for running debugger commands
		before the simulation starts, but after all files have been
		loaded.
		Minor iq80321-related updates.
20060209	Minor hacks (DEVINIT macro, etc).
		Preparing for the generalization of the 64-bit dyntrans address
		translation subsystem.
20060216	Adding ARM ldrd (double-register load).
20060217	Continuing on various ARM-related stuff.
20060218	More progress on the ATA/wdc emulation for NetBSD/iq80321.
		NetBSD/evbarm can now be installed :-)  Updating the docs, etc.
		Continuing on Algor emulation.

==============  RELEASE 0.3.8  ==============



Revision 20 - Directory Listing
Modified Mon Oct 8 16:19:23 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1055 2005/11/25 22:48:36 debug Exp $
20051031	Adding disassembly support for more ARM instructions (clz,
		smul* etc), and adding a hack to support "new tiny" pages
		for StrongARM.
20051101	Minor documentation updates (NetBSD 2.0.2 -> 2.1, and OpenBSD
		3.7 -> 3.8, and lots of testing).
		Changing from 1-sector PIO mode 0 transfers to 128-sector PIO
		mode 3 (in dev_wdc).
		Various minor ARM dyntrans updates (pc-relative loads from
		within the same page as the instruction are now treated as
		constant "mov").
20051102	Re-enabling instruction combinations (they were accidentally
		disabled).
		Dyntrans TLB entries are now overwritten using a round-robin
		scheme instead of randomly. This increases performance.
		Fixing a typo in file.c (thanks to Chuan-Hua Chang for
		noticing it).
		Experimenting with adding ATAPI support to dev_wdc (to make
		emulated *BSD detect cdroms as cdroms, not harddisks).
20051104	Various minor updates.
20051105	Continuing on the ATAPI emulation. Seems to work well enough
		for a NetBSD/cats installation, but not OpenBSD/cats.
		Various other updates.
20051106	Modifying the -Y command line option to allow scaleup with
		certain graphic controllers (only dev_vga so far), not just
		scaledown.
		Some minor dyntrans cleanups.
20051107	Beginning a cleanup up the PCI subsystem (removing the
		read_register hack, etc).
20051108	Continuing the cleanup; splitting up some pci devices into a
		normal autodev device and some separate pci glue code.
20051109	Continuing on the PCI bus stuff; all old pci_*.c have been
		incorporated into normal devices and/or rewritten as glue code
		only, adding a dummy Intel 82371AB PIIX4 for Malta (not really
		tested yet).
		Minor pckbc fix so that Linux doesn't complain.
		Working on the DEC 21143 NIC (ethernet mac rom stuff mostly).
		Various other minor fixes.
20051110	Some more ARM dyntrans fine-tuning (e.g. some instruction
		combinations (cmps followed by conditional branch within the
		same page) and special cases for DPIs with regform when the
		shifter isn't used).
20051111	ARM dyntrans updates: O(n)->O(1) for just-mark-as-non-
		writable in the generic pc_to_pointers function, and some other
		minor hacks.
		Merging Cobalt and evbmips (Malta) ISA interrupt handling,
		and some minor fixes to allow Linux to accept harddisk irqs.
20051112	Minor device updates (pckbc, dec21143, lpt, ...), most
		importantly fixing the ALI M1543/M5229 so that harddisk irqs
		work with Linux/CATS.
20051113	Some more generalizations of the PCI subsystem.
		Finally took the time to add a hack for SCSI CDROM TOCs; this
		enables OpenBSD to use partition 'a' (as needed by the OpenBSD
		installer), and Windows NT's installer to get a bit further.
		Also fixing dev_wdc to allow Linux to detect ATAPI CDROMs.
		Continuing on the DEC 21143.
20051114	Minor ARM dyntrans tweaks; ARM cmps+branch optimization when
		comparing with 0, and generalizing the xchg instr. comb.
		Adding disassembly of ARM mrrc/mcrr and q{,d}{add,sub}.
20051115	Continuing on various PPC things (BATs, other address trans-
		lation things, various loads/stores, BeBox emulation, etc.).
		Beginning to work on PPC interrupt/exception support.
20051116	Factoring out some code which initializes legacy ISA devices
		from those machines that use them (bus_isa).
		Continuing on PPC interrupt/exception support.
20051117	Minor Malta fixes: RTC year offset = 80, disabling a speed hack
		which caused NetBSD to detect a too fast cpu, and adding a new
		hack to make Linux detect a faster cpu.
		Continuing on the Artesyn PM/PPC emulation mode.
		Adding an Algor emulation skeleton (P4032 and P5064);
		implementing some of the basics.
		Continuing on PPC emulation in general; usage of unimplemented
		SPRs is now easier to track, continuing on memory/exception
		related issues, etc.
20051118	More work on PPC emulation (tgpr0..3, exception handling,
		memory stuff, syscalls, etc.).
20051119	Changing the ARM dyntrans code to mostly use cpu->pc, and not
		necessarily use arm reg 15. Seems to work.
		Various PPC updates; continuing on the PReP emulation mode.
20051120	Adding a workaround/hack to dev_mc146818 to allow NetBSD/prep
		to detect the clock.
20051121	More cleanup of the PCI bus (memory and I/O bases, etc).
		Continuing on various PPC things (decrementer and timebase,
		WDCs on obio (on PReP) use irq 13, not 14/15).
20051122	Continuing on the CPC700 controller (interrupts etc) for PMPPC,
		and on PPC stuff in general.
		Finally! After some bug fixes to the virtual to physical addr
		translation, NetBSD/{prep,pmppc} 2.1 reach userland and are
		stable enough to be interacted with.
		More PCI updates; reverse-endian device access for PowerPC etc.
20051123	Generalizing the IEEE floating point subsystem (moving it out
		from src/cpus/cpu_mips_coproc.c into a new src/float_emul.c).
		Input via slave xterms was sometimes not really working; fixing
		this for ns16550, and a warning message is now displayed if
		multiple non-xterm consoles are active.
		Adding some PPC floating point support, etc.
		Various interrupt related updates (dev_wdc, _ns16550, _8259,
		and the isa32 common code in machine.c).
		NetBSD/prep can now be installed! :-) (Well, with some manual
		commands necessary before running sysinst.) Updating the
		documentation and various other things to reflect this.
20051124	Various minor documentation updates.
		Continuing the work on the DEC 21143 NIC.
20051125	LOTS of work on the 21143. Both OpenBSD and NetBSD work fine
		with it now, except that OpenBSD sometimes gives a time-out
		warning.
		Minor documentation updates.

==============  RELEASE 0.3.7  ==============



Revision 18 - Directory Listing
Modified Mon Oct 8 16:19:11 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1004 2005/10/27 14:01:10 debug Exp $
20051011        Passing -A as the default boot arg for CATS (works fine with
                OpenBSD/cats).
20051012	Fixing the VGA cursor offset bug, and speeding up framebuffer
		redraws if character cells contain the same thing as during
		the last redraw.
20051013	Adding a slow strd ARM instruction hack.
20051017	Minor updates: Adding a dummy i80321 Verde controller (for
		XScale emulation), fixing the disassembly of the ARM "ldrd"
		instruction, adding "support" for less-than-4KB pages for ARM
		(by not adding them to translation tables).
20051020	Continuing on some HPCarm stuff. A NetBSD/hpcarm kernel prints
		some boot messages on an emulated Jornada 720.
		Making dev_ram work better with dyntrans (speeds up some things
		quite a bit).
20051021	Automatically generating some of the most common ARM load/store
		multiple instructions.
20051022	Better statistics gathering for the ARM load/store multiple.
		Various other dyntrans and device updates.
20051023	Various minor updates.
20051024	Continuing; minor device and dyntrans fine-tuning. Adding the
		first "reasonable" instruction combination hacks for ARM (the
		cores of NetBSD/cats' memset and memcpy).
20051025	Fixing a dyntrans-related bug in dev_vga. Also changing the
		dyntrans low/high access notification to only be updated on
		writes, not reads. Hopefully it will be enough. (dev_vga in
		charcell mode now seems to work correctly with both reads and
		writes.)
		Experimenting with gathering dyntrans statistics (which parts
		of emulated RAM that are actually executed), and adding
		instruction combination hacks for cache cleaning and a part of
		NetBSD's scanc() function.
20051026	Adding a bitmap for ARM emulation which indicates if a page is
		(specifically) user accessible; loads and stores with the t-
		flag set can now use the translation arrays, which results in
		a measurable speedup.
20051027	Dyntrans updates; adding an extra bitmap array for 32-bit
		emulation modes, speeding up the check whether a physical page
		has any code translations or not (O(n) -> O(1)). Doing a
		similar reduction of O(n) to O(1) by avoiding the scan through
		the translation entries on a translation update (32-bit mode
		only).
		Various other minor hacks.
20051029	Quick release, without any testing at all.

==============  RELEASE 0.3.6.2  ==============



Revision 16 - Directory Listing
Modified Mon Oct 8 16:19:01 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.988 2005/10/11 03:53:57 debug Exp $

==============  RELEASE 0.3.6  ==============

20051008	The bug was not because of faulty ARM documentation after all,
		but it was related to those parts of the code.
		Fixing the RTC (dev_mc146818) to work with CATS.
20051009	Rewriting the R() function; now there are 8192 automatically
		generated smaller functions doing the same thing, but hopefully
		faster. This also fixes some bugs which were triggered when
		trying to compile GXemul inside itself. :-)
		Adding a dummy dev_lpt.
20051010	Small hack to not update virtual translation tables if memory
		accesses are done with the NO_EXCEPTION flag; a time reduction
		of almost a factor 2 for a full NetBSD/cats install. :-)
20051011	Passing -A as the default boot arg for CATS (works fine with
		OpenBSD/cats).

==============  RELEASE 0.3.6.1  ==============



Revision 14 - Directory Listing
Added Mon Oct 8 16:18:51 2007 UTC (11 years, 9 months ago) by dpavlin
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.982 2005/10/07 22:45:32 debug Exp $
20050816	Some success in decoding the way the SGI O2 PROM draws graphics
		during bootup; lines/rectangles and bitmaps work, enough to
		show the bootlogo etc. :-)
		Adding more PPC instructions, and (dummy) BAT registers.
20050817	Updating the pckbc to support scancode type 3 keyboards
		(required in order to interact with the SGI O2 PROM).
		Adding more PPC instructions.
20050818	Adding more ARM instructions; general register forms.
		Importing armreg.h from NetBSD (ARM cpu ids). Adding a (dummy)
		CATS machine mode (using SA110 as the default CPU).
		Continuing on general dyntrans related stuff.
20050819	Register forms for ARM load/stores. Gaah! The Compaq C Compiler
		bug is triggered for ARM loads as well, not just PPC :-(
		Adding full support for ARM PC-relative load/stores, and load/
		stores where the PC register is the destination register.
		Adding support for ARM a.out binaries.
20050820	Continuing to add more ARM instructions, and correcting some
		bugs. Continuing on CATS emulation.
		More work on the PPC stuff.
20050821	Minor PPC and ARM updates. Adding more machine types.
20050822	All ARM "data processing instructions" are now generated
		automatically.
20050824	Beginning the work on the ARM system control coprocessor.
		Adding support for ARM halfword load/stores, and signed loads.
20050825	Fixing an important bug related to the ARM condition codes.
		OpenBSD/zaurus and NetBSD/netwinder now print some boot
		messages. :)
		Adding a dummy SH (Hitachi SuperH) cpu family.
		Beginning to add some ARM virtual address translation.
		MIPS bugfixes: unaligned PC now cause an ADEL exception (at
		least for non-bintrans execution), and ADEL/ADES (not
		TLBL/TLBS) are used if userland tries to access kernel space.
		(Thanks to Joshua Wise for making me aware of these bugs.)
20050827	More work on the ARM emulation, and various other updates.
20050828	More ARM updates.
		Finally taking the time to work on translation invalidation
		(i.e. invalidating translated code mappings when memory is
		written to). Hopefully this doesn't break anything.
20050829	Moving CPU related files from src/ to a new subdir, src/cpus/.
		Moving PROM emulation stuff from src/ to src/promemul/.
		Better debug instruction trace for ARM loads and stores.
20050830	Various ARM updates (correcting CMP flag calculation, etc).
20050831	PPC instruction updates. (Flag fixes, etc.)
20050901	Various minor PPC and ARM instruction emulation updates.
		Minor OpenFirmware emulation updates.
20050903	Adding support for adding arbitrary ARM coprocessors (with
		the i80321 I/O coprocessor as a first test).
		Various other ARM and PPC updates.
20050904	Adding some SHcompact disassembly routines.
20050907	(Re)adding a dummy HPPA CPU module, and a dummy i960 module.
20050908	Began hacking on some Apple Partition Table support.
20050909	Adding support for loading Mach-O (Darwin PPC) binaries.
20050910	Fixing an ARM bug (Carry flag was incorrectly updated for some
		data processing instructions); OpenBSD/cats and NetBSD/
		netwinder get quite a bit further now.
		Applying a patch to dev_wdc, and a one-liner to dev_pcic, to
		make them work better when emulating new versions of OpenBSD.
		(Thanks to Alexander Yurchenko for the patches.)
		Also doing some other minor updates to dev_wdc. (Some cleanup,
		and finally converting to devinit, etc.)
20050912	IRIX doesn't have u_int64_t by default (noticed by Andreas
		<avr@gnulinux.nl>); configure updated to reflect this.
		Working on ARM register bank switching, CPSR vs SPSR issues,
		and beginning the work on interrupt/exception support.
20050913	Various minor ARM updates (speeding up load/store multiple,
		and fixing a ROR bug in R(); NetBSD/cats now boots as far as
		OpenBSD/cats).
20050917	Adding a dummy Atmel AVR (8-bit) cpu family skeleton.
20050918	Various minor updates.
20050919	Symbols are now loaded from Mach-O executables.
		Continuing the work on adding ARM exception support.
20050920	More work on ARM stuff: OpenBSD/cats and NetBSD/cats reach
		userland! :-)
20050921	Some more progress on ARM interrupt specifics.
20050923	Fixing linesize for VR4121 (patch by Yurchenko). Also fixing
		linesizes/cachesizes for some other VR4xxx.
		Adding a dummy Acer Labs M1543 PCI-ISA bridge (for CATS) and a
		dummy Symphony Labs 83C553 bridge (for Netwinder), usable by 
		dev_footbridge.
20050924	Some PPC progress.
20050925	More PPC progress.
20050926	PPC progress (fixing some bugs etc); Darwin's kernel gets
		slightly further than before.
20050928	Various updates: footbridge/ISA/pciide stuff, and finally
		fixing the VGA text scroll-by-changing-the-base-offset bug.
20050930	Adding a dummy S3 ViRGE pci card for CATS emulation, which
		both NetBSD and OpenBSD detects as VGA.
		Continuing on Footbridge (timers, ISA interrupt stuff).
20051001	Continuing... there are still bugs, probably interrupt-
		related.
20051002	More work on the Footbridge (interrupt stuff).
20051003	Various minor updates. (Trying to find the bug(s).)
20051004	Continuing on the ARM stuff.
20051005	More ARM-related fixes.
20051007	FINALLY! Found and fixed 2 ARM bugs: 1 memory related, and the
		other was because of an error in the ARM manual (load multiple
		with the S-bit set should _NOT_ load usermode registers, as the
		manual says, but it should load saved registers, which may or
		may not happen to be usermode registers).
		NetBSD/cats and OpenBSD/cats seem to install fine now :-)
		except for a minor bug at the end of the OpenBSD/cats install.
		Updating the documentation, preparing for the next release.
20051008	Continuing with release testing and cleanup.


  ViewVC Help
Powered by ViewVC 1.1.26