--- trunk/man/gxemul.1 2007/10/08 16:18:38 12 +++ trunk/man/gxemul.1 2007/10/08 16:21:17 34 @@ -1,6 +1,6 @@ -.\" $Id: gxemul.1,v 1.29 2005/08/10 15:51:09 debug Exp $ +.\" $Id: gxemul.1,v 1.85 2007/02/05 16:49:21 debug Exp $ .\" -.\" Copyright (C) 2004-2005 Anders Gavare. All rights reserved. +.\" Copyright (C) 2004-2007 Anders Gavare. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions are met: @@ -29,7 +29,7 @@ .\" This is a minimal man page for GXemul. Process this file with .\" groff -man -Tascii gxemul.1 or nroff -man gxemul.1 .\" -.Dd AUGUST 2005 +.Dd FEBRUARY 2007 .Dt GXEMUL 1 .Os .Sh NAME @@ -41,33 +41,40 @@ .Op file Ar ... .Nm .Op general options -.Op Ar @configfile ... -.Nm -.Op userland, other, and general options -.Ar file Op Ar args ... +.Ar @configfile +.\" TODO: Reenable this once userland emulation works: +.\" .Nm +.\" .Op userland, other, and general options +.\" .Ar file Op Ar args ... .Sh DESCRIPTION .Nm -is an experimental instruction-level machine emulator. It can be used to -run binary code for MIPS-based machines, regardless of host -platform. Several emulation modes are available. For some modes, -processors and surrounding hardware components are emulated well enough to -let unmodified operating systems (e.g. NetBSD) run as if they were running -on a real machine. -.Pp -(Non-MIPS emulation modes are also under development, but so far none of -those modes has reached the completeness required to run unmodified -operating systems.) -.Pp -There are three ways to invoke the emulator. When emulating a -complete machine, settings can be entered directly on the command line, or -they can be read from a configuration file. When emulating a userland -environment (syscall-only emulation, not emulating complete machines), -then the program name and its argument should be given on the command -line. +is an experimental instruction-level machine emulator. Several +emulation modes are available. In some modes, processors and surrounding +hardware components are emulated well enough to let unmodified operating +systems (e.g. NetBSD) run inside the emulator as if they were running on a +real machine. +.Pp +Processors (ARM, MIPS, PowerPC, SuperH) are emulated using dynamic translation. +However, unlike some other dynamically translating emulators, GXemul does +not need to generate native code, only a "runnable intermediate +representation", and will thus run on any host architecture, without the +need to implement per-architecture backends. +.Pp +The emulator can be invoked in the following ways: +.Pp +1. When emulating a complete machine, configuration options can be entered +directly on the command line. +.Pp +2. Options can be read from a configuration file. +.\" .Pp +.\" 3. When emulating a userland environment (syscall-only emulation, not +.\" emulating complete machines), then the program name and its argument +.\" should be given on the command line. (This mode doesn't really work yet, +.\" and is disabled for stable release builds.) .Pp The easiest way to use the emulator is to supply settings directly on the command line. The most important thing you need to supply is the -file argument. This is the name of a binary file (an ELF, a.out, ECOFF, +file argument. This is the name of a binary file (an ELF, a.out, COFF/ECOFF, SREC, or a raw binary image) which you wish to run in the emulator. This file might be an operating system kernel, or perhaps a ROM image file. .Pp @@ -82,19 +89,31 @@ .Fl H to get a list of available emulation modes. .Pp -There are two exceptions to the normal invocation usage mentioned above. -The first is for DECstation emulation: if you have a bootable -DECstation harddisk or CDROM image, then just supplying the diskimage via -the +There are three exceptions to the normal invocation usage mentioned above. +.Pp +1. For DECstation emulation, if you have a bootable DECstation harddisk or +CDROM image, then just supplying the diskimage via the .Fl d -option is sufficient. (The filename of the kernel can then be +option is sufficient. The filename of the kernel can then be skipped, as the emulator runs the bootblocks from the diskimage directly and -doesn't need the kernel as a separate file.) -The second is if you supply an ISO9660 CDROM disk image. You may then use -the +doesn't need the kernel as a separate file. +.Pp +2. If you supply an ISO9660 CDROM disk image, then using the +.Fl j +option to indicate a file on the CDROM filesystem to load is sufficient; +no additional kernel filename needs to be supplied on the command line. +.Pp +3. For Dreamcast emulation, when booting e.g. a NetBSD/dreamcast CDROM +image, it is enough to supply the disk image (with the correct ISO +partition start offset). Bootblocks will be read directly from the CDROM +image, and there is no need to supply the name of an external kernel on +the command line. +.Pp +Gzipped kernels are automatically unzipped, by calling the external gunzip +program, both when specifying a gzipped file directly on the command line +and when loading such a file using the .Fl j -option to indicate which file on the CDROM filesystem that should be -loaded into emulated memory. +option. .Pp Machine selection options: .Bl -tag -width Ds @@ -117,14 +136,6 @@ .Pp Other options: .Bl -tag -width Ds -.It Fl A -Disable load/store alignment checks in some cases. This might give a small -increase in performance, but the emulator will not run correctly if the -emulated code actually tries to do unaligned loads or stores. -.It Fl B -Disable dynamic binary translation. By default, bintrans -will be turned on if the host+target architecture combination is -supported. .It Fl C Ar x Try to emulate a specific CPU type, .Ar "x". @@ -132,12 +143,12 @@ (Use .Fl H to get a list of available CPU types.) -.It Fl d Ar name +.It Fl d Ar [modifiers:]filename Add -.Ar name +.Ar filename as a disk image. By adding one or more modifier characters and then a colon (":") as a prefix to -.Ar "name", +.Ar filename, you can modify the way the disk image is treated. Available modifiers are: .Bl -tag -width Ds .It b @@ -152,99 +163,207 @@ Override the default geometry; use H heads and S sectors-per-track. (The number of cylinders is calculated automatically.) .It i -IDE. +IDE. (This is the default for most machine types.) +.It oOFS; +Set the base offset for an ISO9660 filesystem on a disk image. The default +is 0. A suitable offset when booting from Dreamcast ISO9660 filesystem +images, which are offset by 11702 sectors, is 23965696. .It r Read-only (don't allow changes to be written to the file). .It s -SCSI (this is the default for most machine types). +SCSI. .It t Tape. .It 0-7 Force a specific ID number. .El .Pp -Unless otherwise specified, filenames ending with ".iso" are assumed to be -CDROM images. Most others are assumed to be disks. Depending on which -machine is being emulated, the default for disks can be either SCSI or -IDE. Some disk images that are very small are assumed to be floppy disks. -(If you are not happy with the way a disk image is detected, then you need -to use explicit prefixes to force a specific type.) +For SCSI devices, the ID number is the SCSI ID. For IDE harddisks, the ID +number has the following meaning: +.Bl -tag -width Ds +.It 0 +Primary master. +.It 1 +Primary slave. +.It 2 +Secondary master. +.It 3 +Secondary slave. +.El +.Pp +Unless otherwise specified, filenames ending with ".iso" or ".cdr" are +assumed to be CDROM images. Most others are assumed to be disks. Depending +on which machine is being emulated, the default for disks can be either +SCSI or IDE. Some disk images that are very small are assumed to be floppy +disks. (If you are not happy with the way a disk image is detected, then +you need to use explicit prefixes to force a specific type.) .Pp For floppies, the gH;S; prefix is ignored. Instead, the number of heads and cylinders are assumed to be 2 and 80, respectively, and the number of sectors per track is calculated automatically. (This works for 720KB, 1.2MB, 1.44MB, and 2.88MB floppies.) -.It Fl I Ar x -Emulate clock interrupts at -.Ar x -Hz. (This affects emulated clock devices only, not actual runtime speed. -This disables automatic clock adjustments, which is otherwise turned on.) -(This option is probably only valid for DECstation emulation.) +.It Fl G Ar port +Pause at startup, and listen to TCP port +.Ar port +for incoming remote GDB connections. The emulator starts up in paused +mode, and it is up to the remote GDB instance to start the session. +.It Fl I Ar hz +Set the main CPUs frequency to +.Ar hz +Hz. This option does not work for all emulated machine modes. It affects +the way count/compare interrupts are faked to simulate emulated time = +real world time. If the guest operating system relies on RTC interrupts +instead of count/compare interrupts, then this option has no effect. +.Pp +Setting the frequency to zero disables automatic synchronization of +emulated time vs real world time, and the count/compare system runs at a +fixed rate. .It Fl i -Display each instruction as it is being executed. +Enable instruction trace, i.e. display disassembly of each instruction as +it is being executed. .It Fl J -Disable some speed tricks. +Disable instruction combinations in the dynamic translator. .It Fl j Ar n Set the name of the kernel to .Ar "n". When booting from an ISO9660 filesystem, the emulator will try to boot using this file. (In some emulation modes, eg. DECstation, this name is passed along to the boot program. Useful names are "bsd" for OpenBSD/pmax, -or "vmunix" for Ultrix.) +"vmunix" for Ultrix, or "vmsprite" for Sprite.) .It Fl M Ar m Emulate .Ar m MBs of physical RAM. This overrides the default amount of RAM for the selected machine type. -.It Fl m Ar nr -Run at most -.Ar nr -instructions (on any cpu). .It Fl N -Display nr of instructions/second average, at regular intervals. +Display the number of executed instructions per second on average, at +regular intervals. .It Fl n Ar nr -Set nr of CPUs (for SMP experiments). +Set the number of processors in the machine, for SMP experiments. +.Pp +Note 1: The emulator allocates quite a lot of virtual memory for +per-CPU translation tables. On 64-bit hosts, this is normally not a +problem. On 32-bit hosts, this can use up all available virtual userspace +memory. The solution is to either run the emulator on a 64-bit host, +or limit the number of emulated CPUs to a reasonably low number. +.Pp +Note 2: SMP simulation is not working very well yet; multiple processors +are simulated, but synchronization between the processors does not map +very well to how real-world SMP systems work. .It Fl O Force a "netboot" (tftp instead of disk), even when a disk image is present (for DECstation, SGI, and ARC emulation). .It Fl o Ar arg -Set the boot argument (for DEC, ARC, or SGI emulation). +Set the boot argument (mostly useful for DEC, ARC, or SGI emulation). Default .Ar arg -for DEC is "-a", for ARC "-aN". +for DEC is "-a", for ARC/SGI it is "-aN", and for CATS it is "-A". .It Fl p Ar pc -Add a breakpoint. (Remember to use the "0x" prefix for hex.) +Add a breakpoint. +.Ar pc +can be a symbol, or a numeric value. (Remember to use the "0x" prefix for +hexadecimal values.) .It Fl Q -Disable the built-in PROM emulation. This is useful for running raw ROM -images from real machines. +Disable the built-in (software-only) PROM emulation. This option is useful +for experimenting with running raw ROM images from real machines. The default +behaviour of the emulator is to "fake" certain PROM calls used by guest +operating systems (e.g. NetBSD), so that no real PROM image is needed. .It Fl R -Use a random bootstrap cpu, instead of CPU nr 0. (For SMP experiments.) +Use a random bootstrap cpu, instead of CPU nr 0. (This option is only +meaningful together with the +.Fl n +option.) .It Fl r Dump register contents for every executed instruction. .It Fl S -Initialize the emulated RAM to random data, instead of zeroes. +Initialize emulated RAM to random data, instead of zeroes. This option +is useful when trying to trigger bugs in a program that occur because the +program assumed that uninitialized memory contains zeros. (Use with +care.) +.It Fl s Ar flags:filename +Gather statistics based on the current emulated program counter value, +while the program executes. The statistics is actually just a raw dump of +all program counter values in sequence, suitable for post-analysis with +separate tools. Output is appended to +.Ar filename. +.Pp +The +.Ar flags +should include one or more of the following type specifiers: +.Bl -tag -width Ds +.It v +Virtual. This means that the program counter value is used. +.It p +Physical. This means that the physical address of where the program +is actually running is used. +.It i +Instruction call. This type of statistics gathering is practically only +useful during development of the emulator itself. The output is a list of +addresses of instruction call functions (ic->f), which after some +post-processing can be used as a basis for deciding when to implement +instruction combinations. +.El +.Pp +The +.Ar flags +may also include the following optional modifiers: +.Bl -tag -width Ds +.It d +Disabled at startup. +.It o +Overwrite the file, instead of appending to it. +.El +.Pp +Statistics gathering can be enabled/disabled at runtime by using the +"statistics_enabled = yes" and "statistics_enabled = no" debugger +commands. +.Pp +When gathering instruction statistics using the +.Fl s +option, instruction combinations and native code generation +are always disabled (i.e. implicit +.Fl J +and +.Fl B +flags are added to the command line). +.Pp +If a value is missing (e.g. the end-of-page slot does not really have a +known physical address), it is written out as just a dash ("-"). .It Fl T -Enter the single-step debugger on unimplemented memory accesses. +Halt if the emulated program attempts to access non-existing memory. .It Fl t Show a trace tree of all function calls being made. .It Fl U Enable slow_serial_interrupts_hack_for_linux. .It Fl X -Use X11. +Use X11. This option enables graphical framebuffers. .It Fl x -Open up new xterms for emulated serial ports. (Default is to open up -xterms when using configuration files, but not when starting an -emulation with settings directly on the command line.) +Open up new xterms for emulated serial ports. The default behaviour is to +open up xterms when using configuration files, or if X11 is enabled. When +starting up a simple emulation session with settings directly on the +command line, and neither +.Fl X +nor +.Fl x +is used, then all output is confined to the terminal that +.Nm +started in. .It Fl Y Ar n Scale down framebuffer windows by .Ar n x .Ar n -times. -.It Fl y Ar x -Set max_random_cycles_per_chunk to -.Ar x -(experimental). +times. This option is useful when emulating a very large framebuffer, and +the actual display is of lower resolution. If +.Ar n +is negative, then there will be no scaledown, but emulation of certain +graphic controllers will be scaled up +by +.Ar -n +times instead. E.g. Using +.Ar -2 +with VGA text mode emulation will result in 80x25 character cells rendered +in a 1280x800 window, instead of the normal resolution of 640x400. .It Fl Z Ar n Set the number of graphics cards, for emulating a dual-head or tripple-head environment. (Only for DECstation emulation so far.) @@ -254,46 +373,65 @@ as an X11 display to use for framebuffers. .El .Pp -Userland options: -.Bl -tag -width Ds -.It Fl u Ar emul-mode -Userland-only (syscall) emulation. (Use -.Fl H -to get a list of available emulation modes.) Some (but not all) of the -options listed under Other options above can also be used with userland -emulation. -.El -.Pp +.\" Userland options: +.\" .Bl -tag -width Ds +.\" .It Fl u Ar emul-mode +.\" Userland-only (syscall) emulation. (Use +.\" .Fl H +.\" to get a list of available emulation modes.) Some (but not all) of the +.\" options listed under Other options above can also be used with +.\" userland emulation. +.\" .El +.\" .Pp General options: .Bl -tag -width Ds +.It Fl b +Enable native code generation at runtime. This is not really implemented +yet. Don't use it unless you know what you are doing. It will most +likely not work. +.It Fl B +Disable native code generation at runtime. (This is the default in +GXemul 0.4.4; there are no implemented native code generation backends.) +.It Fl c Ar cmd +Add +.Ar cmd +as a command to run before starting the simulation. A similar effect can +be achieved by using the +.Fl V +option, and entering the commands manually. .It Fl D -Guarantee fully deterministic behavior. Normally, the emulator calls -srandom() with a seed based on the current time at startup. When the -.Fl D -option is used, the srandom() call is skipped, which should cause two -subsequent invocations of the emulator to be identical, if all other -settings are identical and no user input is taking place. (If this option -is used, then -.Fl I -must also be used.) +Causes the emulator to skip a call to srandom(). This leads to somewhat +more deterministic behaviour than running without this option. +However, if the emulated machine has clocks or timer interrupt sources, +or if user interaction is taking place (e.g. keyboard input at irregular +intervals), then this option is meaningless. .It Fl H Display a list of available CPU types, machine types, and userland emulation modes. (Most of these don't work. Please read the documentation included in the .Nm -distribution for details on which modes that actually work.) +distribution for details on which modes that actually work. Userland +emulation is not included in stable release builds, since it doesn't work +yet.) .It Fl h Display a list of all available command line options. +.It Fl k Ar n +Set the size of the dyntrans cache (per emulated CPU) to +.Ar n +MB. The default size is 32 MB. .It Fl K Force the single-step debugger to be entered at the end of a simulation. .It Fl q Quiet mode; this suppresses startup messages. -.It Fl s -Show opcode usage statistics after the simulation. +.\".It Fl s +.\"For MIPS emulation: Show opcode usage statistics after the simulation. +.\"For non-MIPS emulation (i.e. using dyntrans): Save statistics to a file +.\"at regular intervals of which physical addresses that were executed. .It Fl V Start up in the single-step debugger, paused. .It Fl v -Verbose debug messages. +Increase verbosity (show more debug messages). This option can be used +multiple times. .El .Pp Configuration file startup: @@ -329,30 +467,54 @@ .Pp .Dl "gxemul -E testmips -V hello_mips" .Pp -(Paused mode means that you enter the interactive single-step debugger -directly at startup, instead of launching the Hello World program.) +Paused mode means that you enter the interactive single-step debugger +directly at startup, instead of launching the Hello World program. +.Pp +The paused mode is also what should be used when running "unknown" files +for the first time in the emulator. E.g. if you have a binary which you +think is some kind of MIPS ROM image, then you can try the following: +.Pp +.Dl "gxemul -vv -E baremips -V 0xbfc00000:image.raw" +.Pp +You can then use the single-stepping functionality of the built-in +debugger to run the code in the ROM image, to see how it behaves. Based on +that, you can deduce what machine type it was actually from (the +baremips machine is not a real machine), and perhaps try again with +another emulation mode. +.Pp +In general, however, real ROM images require much more emulation detail +than GXemul provides, so they can usually not run. .Pp Please read the documentation for more details. .Sh BUGS -There are many bugs. Some of the known bugs are listed in the BUGS +There are many bugs. Some of the known bugs are mentioned in the TODO file in the .Nm -source distribution, some are indirectly mentioned in the TODO file, -and some are mentioned in the source code itself. +source distribution, some are marked as TODO in the source code itself. .Pp -The binary translation subsystem is really terrible, but it is less -terrible than running without it. +Userland (syscall-only) emulation, i.e. running a userland binary directly +without simulating an entire machine, doesn't really work yet. .Pp -Userland (syscall-only) emulation doesn't really work yet. +The documentation sometimes only reflects the way things worked with +the old MIPS emulation mode (prior to 0.4.0), and it is incorrect when +applied to current releases. .Pp .Nm -does not simulate individual pipe-line stages or penalties caused by -branch-prediction misses or cache misses, so it cannot be used for -accurate performance measurement. +is in general not cycle-accurate; it does not simulate individual +pipe-line stages or penalties caused by branch-prediction misses or +cache misses, so it cannot be used for accurate simulation of any actual +real-world processor. .Pp .Nm -is not timing-accurate. +is in general not timing-accurate. Some emulation modes +(DECstation, CATS, NetWinder, MobilePro (hpcmips), Malta (evbmips), +Cobalt, Algor, Dreamcast, PICA-61, and IQ80321) try to make the guest +operating system's clock run at the same speed as the host clock. +However, the number of instructions executed per clock tick can +obviously vary, depending on the current CPU load on the host. .Sh AUTHOR -Anders Gavare +GXemul is Copyright (C) 2003-2007 Anders Gavare .Pp -See http://gavare.se/gxemul/ for more information. +See http://gavare.se/gxemul/ for more information. For other Copyright +messages, see the corresponding parts of the source code and/or +documentation.