1 |
$Id: TODO,v 1.343 2006/08/14 18:46:30 debug Exp $ |
$Id: TODO,v 1.536 2007/06/15 22:30:17 debug Exp $ |
2 |
|
|
3 |
Hm. This file is in random order, and not all parts of it are up-to-date. |
Some things, in no specific order, that I'd like to fix: |
4 |
|
(Some items in this list are perhaps already fixed.) |
5 |
|
|
6 |
|
M88K: |
7 |
Implementation: |
o) Neither NIP nor FIP valid in rte? |
8 |
x) ARM "wait"-like instruction. |
o) FIP != NIP + 4, in rte! (Simulate delayed branch stuff.) |
9 |
x) CLOCK FRAMEWORK! |
o) cpu_dyntrans.c: MEMORY_USER_ACCESS implementation for M88K! |
10 |
x) Mouse support for NetBSD/pmax 4.x! |
o) xmem: Set transaction registers! |
11 |
x) See netwinder_reset() in NetBSD; the current "an internal error |
o) CMMUs: |
12 |
occured" message after reboot/halt is too ugly. |
o) Translation invalidations, could be optimized. |
13 |
x) 64-bit ranges in src/cpus/memory_mips_v2p.c |
o) Move initialization from dev_mvme187 to somewhere |
14 |
x) Revert the dyntrans page template experiment? Hm. |
more reasonable? |
15 |
x) Refactor the cpu type detection/initialization/listing. |
o) Instruction trace by using bits of ??IP control regs. |
16 |
Macro, which can be used as long as the cpu definitions |
o) Interrupts (these are machine dependent, though). |
17 |
contain a 'name'? |
o) Implement devices etc. for one or more machine modes, |
18 |
x) Testmachine includes: |
to get some guest OS running. OpenBSD/mvme88k on MVME187 |
19 |
+ dev_fb block fill and copy |
seems to be the smartest path to follow for now. |
20 |
+ dev_fb draw characters (from the built-in font)? |
o) VME bus device |
21 |
+ dev_fb input device? mouse pointer coordinates and buttons |
o) PCC2 |
22 |
(allow changes in these to cause interrupts as well?) |
o) Cirrus Logic serial port controller |
23 |
+ Redefine the halt() function so that it stops "sometimes |
o) Instruction disassembly, and implementation: |
24 |
soon", i.e. usage in demo code should be: |
o) See http://www.panggih.staff.ugm.ac.id/download/GCC/info/gcc.i5 |
25 |
for (;;) { |
for some strange cases of when "div" can fail (?) |
26 |
halt(); |
o) Floating point stuff |
27 |
} |
o) "Graphics" instructions (M88110-specific) |
|
x) Continue on SPARC emulation |
|
|
+ Enable it in the configure script as soon as it can |
|
|
run all the demo programs. |
|
|
x) Continue on Alpha emulation (virtual memory, etc). Cleanup. |
|
|
x) Nicer MIPS status bits in register dumps. |
|
|
x) Alignment exceptions (MIPS, PPC, ARM?, ...) |
|
|
x) Rewrite the networking stack; make OpenBSD work better as a guest |
|
|
OS, fix the performance problems, make Linux work with DHCP, etc. |
|
|
Support VDE (vde.sf.net)? Allow SLIP connections, possibly PPP, |
|
|
in addition to ethernet? |
|
|
x) Implement more ethernet NICs. |
|
|
x) IOP (I2O) device? |
|
|
|
|
|
Documentation: |
|
|
x) "Install netbsd/pmax first" => only use the install kernel? |
|
|
x) Rewrite the section about experimental devices, after the |
|
|
framebuffer acceleration has been implemented, and demos |
|
|
written. (Symbolic names instead of numbers; example |
|
|
use cases, etc. Mention demo files that use the various |
|
|
features?) |
|
|
x) "a very simple linear framebuffer device (for graphics output)" |
|
|
under "which machines does gxemul emulate" ==> better |
|
|
description? |
|
|
x) Better description on how to set up a cross compiler? |
|
|
Example for MIPS64. |
|
|
|
|
|
Long-term design: |
|
|
x) Instruction combination collisions? How to avoid easily... |
|
|
x) Think about how to do both SHmedia and SHcompact in a reasonable |
|
|
way! |
|
|
o) Actually use the settings object, better debugger stuff, etc! |
|
|
o) Debugger command for enabling/disabling instruction statistics |
|
|
during runtime. machine.statistics = on|off |
|
|
x) MAINBUS REDESIGN! |
|
|
x) PCI redesign... I need to read up on how PCI actually works :) |
|
|
x) Clock framework! Go through all clock devices, make sure they |
|
|
return correct data, and run at correct speeds! |
|
|
x) Dyntrans with valgrind-inspired memory checker. (In memory_rw, |
|
|
it would be reasonably simple to add; in each individual fast |
|
|
load/store routine = a lot more work, and it would become |
|
|
kludgy very fast.) |
|
|
x) Dyntrans with SMP... lots of work to be done here. |
|
|
x) Dyntrans with cache emulation... lots of work here as well. |
|
|
x) Reimplement the config file parser from scratch. |
|
|
|
|
|
------------------------------------------------------------------------------- |
|
|
|
|
|
Simple Valgrind-like checks? |
|
|
o) Mark every address with bits which tell whether or not the address |
|
|
has been written to. |
|
|
o) What should happen when programs are loaded? Text/data, bss (zero |
|
|
filled). But stack space and heap is uninitialized. |
|
|
o) Uninitialized local variables: |
|
|
A load from a place on the stack which has not previously |
|
|
been stored to => warning. Increasing the stack pointer using |
|
|
any available means should reset the memory to uninitialized. |
|
|
o) If calls to malloc() and free() can be intercepted: |
|
|
o) Access to a memory area after free() => warning. |
|
|
o) Memory returned by malloc() is marked as not-initialized. |
|
|
o) Non-passive, but good to have: Change the argument |
|
|
given to malloc, to return a slightly larger memory |
|
|
area, i.e. margin_before + size + margin_after, |
|
|
and return the pointer + margin_before. |
|
|
Any access to the margin_before or _after space results |
|
|
in warnings. (free() must be modified to free the |
|
|
actually allocated address.) |
|
|
|
|
|
SMP: |
|
|
o) dev_mp doesn't work well with dyntrans yet |
|
|
o) In general, IPIs, CAS, LL/SC etc must be made to work with dyntrans |
|
28 |
|
|
29 |
MIPS: |
MIPS: |
30 |
+) Some more work on opcodes. |
o) Nicer MIPS status bits in register dumps. |
31 |
x) The "wait" instruction. How to implement this functionality? |
o) Floating point exception correctness. |
32 |
(SMP, non-MIPS, interrupt correctness, host idling, ...) |
o) Fix this? Triggered by NetBSD/sgimips? Hm: |
33 |
|
to_be_translated(): TODO: unimplemented instruction: |
34 |
|
000000000065102c: 00200800 (d) rot_00 at,zr,0 |
35 |
|
o) Some more work on opcodes. |
36 |
x) MIPS64 revision 2. |
x) MIPS64 revision 2. |
37 |
o) Find out which actual CPUs implement the rev2 ISA! |
o) Find out which actual CPUs implement the rev2 ISA! |
38 |
|
o) DINS, DINSM, DINSU etc |
39 |
|
o) DROTR32 and similar MIPS64 rev 2 instructions, |
40 |
|
which have a rotation bit which differs from |
41 |
|
previous ISAs. |
42 |
x) _MAYBE_ TX79 and R5900 actually differ in their |
x) _MAYBE_ TX79 and R5900 actually differ in their |
43 |
opcodes? Check this carefully! |
opcodes? Check this carefully! |
44 |
o) Dyntrans: Count register updates are probably not 100% correct yet. |
o) Dyntrans: Count register updates are probably not 100% correct yet. |
45 |
o) Refactor code for performance and readability/maintainability. |
o) Refactor code for performance and readability/maintainability. |
|
o) DROTR32 and similar MIPS64 rev 2 instructions, which have |
|
|
a rotation bit which differs from previous ISAs. |
|
|
o) EI and DI instructions for MIPS64/32 rev 2. NOTE: These are |
|
|
_NOT_ the same as for R5900! |
|
46 |
o) (Re)implement 128-bit loads/stores for R5900. |
o) (Re)implement 128-bit loads/stores for R5900. |
47 |
|
o) Coprocessor 1x (i.e. 3) should cause cp1 exceptions, not 3? |
48 |
|
(See http://lists.gnu.org/archive/html/qemu-devel/2007-05/msg00005.html) |
49 |
o) R4000 and others: |
o) R4000 and others: |
50 |
x) watchhi/watchlo exceptions, and other exception |
x) watchhi/watchlo exceptions, and other exception |
51 |
handling details |
handling details |
52 |
|
o) MIPS 5K* have 42 physical address bits, not 40/44? |
53 |
o) R10000 and others: (R12000, R14000 ?) |
o) R10000 and others: (R12000, R14000 ?) |
54 |
|
x) The code before the line |
55 |
|
/* reg[COP0_PAGEMASK] = cpu->cd.mips.coproc[0]->tlbs[0].mask & PAGEMASK_MASK; */ |
56 |
|
in cpu_mips.c is not correct for R10000 according to |
57 |
|
Lemote's Godson patches for GXemul. TODO: Go through all |
58 |
|
register definitions according to http://techpubs.sgi.com/library/tpl/cgi-bin/getdoc.cgi/hdwr/bks/SGI_Developer/books/R10K_UM/sgi_html/t5.Ver.2.0.book_263.html#HEADING334 |
59 |
|
and make sure everything works with R10000. |
60 |
|
Then test with OpenBSD/sgi? |
61 |
|
x) Entry LO mask (as above). |
62 |
x) memory space, exceptions, ... |
x) memory space, exceptions, ... |
63 |
x) use cop0 framemask for tlb lookups |
x) use cop0 framemask for tlb lookups |
64 |
(http://techpubs.sgi.com/library/tpl/cgi-bin/getdoc.cgi/hdwr/bks/SGI_Developer/books/R10K_UM/sgi_html/t5.Ver.2.0.book_284.html) |
(http://techpubs.sgi.com/library/tpl/cgi-bin/getdoc.cgi/hdwr/bks/SGI_Developer/books/R10K_UM/sgi_html/t5.Ver.2.0.book_284.html) |
65 |
|
|
66 |
Dyntrans: |
SuperH: |
67 |
x) Redesign/rethink the delay slot mechanism used for e.g. MIPS, |
x) Auto-generation of loads/stores! This should get rid of at least |
68 |
so that it caches a translation (that is, an instruction |
the endianness check in each load/store. |
69 |
word and the instr_call it was translated to the last |
x) Experiment with whether or not correct ITLB emulation is |
70 |
time), so that it doesn't need to do slow |
actually needed. (20070522: I'm turning it off today.) |
71 |
to_be_translated for each end of page? |
x) SH4 interrupt controller: |
72 |
x) Program Counter statistics: |
x) MASKING should be possible! |
73 |
Per machine? What about SMP? All data to the same file? |
x) SH4 DMA (0xffa00000) |
74 |
A debugger command should be possible to use to enable/ |
x) SH4 UBC (0xff200000) |
75 |
disable statistics gathering. |
x) Store queues can copy 32 bytes at a time, there's no need to |
76 |
Configuration file option! |
copy individual 32-bit words. (Performance improvement.) |
77 |
x) Common fatal_abort() function, which drops into the debugger |
x) SH4 BSC (Bus State Controller) |
78 |
without continuing. |
x) Instruction tracing should include symbols for branch targets, |
79 |
x) INVALIDATION should cause translations in _all_ cpus to be |
and so on, to make the output more human readable. |
80 |
invalidated, e.g. on a write to a write-protected page |
x) SH3-specific devices: Pretty much everything! |
81 |
(containing code) |
x) NetBSD/evbsh3, hpcsh! Linux? |
82 |
x) 16-bit encodings? (MIPS16, ARM Thumb, SH3, ...) |
x) Floating point speed! |
83 |
x) Lots of other stuff: see src/cpus/README_DYNTRANS |
x) Floating point exception correctness. |
84 |
x) true recompilation backend? think carefully about this, |
x) NetBSD HEAD (as of April 2007) hangs during bootup, because it |
85 |
experiment in a separate project (not in GXemul) |
turns on/off interrupts in an unfortunately synchronized way |
86 |
o) First test would be to just implement a simple |
with dyntrans. This needs to be fixed. |
87 |
instruction such as MIPS' addiu or lui, on AMD64 |
x) Exceptions for unaligned load/stores. OpenBSD/landisk uses |
88 |
hosts... |
this mechanism for its reboot code (machine_reset). |
89 |
x) Idle loop detection? (Depends on target.) Could be turned |
x) Think carefully about how to implement SH5/SH64 (for evbsh5). |
90 |
into usleep(1) or similar on the host... except when doing |
|
91 |
e.g. SMP emulation. Then it becomes trickier. |
Landisk SH4: |
92 |
|
x) When NetBSD/landisk 4.0 has been released, make sure it works |
93 |
Transputer: |
in the emulator. (Update documentation, etc.) |
94 |
x) Implement support for Helios binaries. |
|
95 |
x) Stack and register contents at startup? |
Dreamcast: |
96 |
x) Figure out how to boot an entire Helios distribution. |
x) G2 DMA |
97 |
x) Implement all instructions. :) |
x) LAN adapter (dev_mb8696x.c). NetBSD root-on-nfs. |
98 |
|
x) PVR: Lots of stuff. See dev_pvr.c. |
99 |
|
x) Better GDROM support |
100 |
|
x) Modem |
101 |
|
x) PCI bridge/bus? |
102 |
|
x) Maple bus: |
103 |
|
x) Correct controller input |
104 |
|
x) Mouse input |
105 |
|
x) Software emulation of BIOS calls: |
106 |
|
x) GD-ROM emulation: Use the GDROM device. |
107 |
|
x) Use the VGA font as a fake ROM font. (Better than |
108 |
|
nothing.) |
109 |
|
x) Make as many as possible of the KOS examples run! |
110 |
|
x) More homebrew demos/games. |
111 |
|
x) SPU: Sound emulation (ARM cpu). |
112 |
|
x) VME processor emulation? "(Sanyo LC8670 "Potato")" according to |
113 |
|
Wikipedia, LC86K87 according to Comstedt's page. See |
114 |
|
http://www.maushammer.com/vmu.html for a good description of |
115 |
|
the differences between LC86104C and the one used in the VME. |
116 |
|
|
117 |
Alpha: |
Alpha: |
118 |
o) Virtual memory (tlbs etc) |
x) OSF1 PALcode, Virtual memory support. |
119 |
o) Get {NetBSD,OpenBSD,Linux}/alpha booting. :) |
x) PALcode replacement! PAL1E etc opcodes...? |
120 |
|
x) Interrupt/exception/trap handling. |
121 |
SPARC: |
x) Floating point exception correctness. |
122 |
o) Load/stores to alternate address spaces! |
x) More work on bootup memory and register contents. |
123 |
o) Save/restore register windows etc! |
x) More Alpha machine types, so it could work with |
124 |
|
OpenBSD, FreeBSD, and Linux too? |
125 |
|
|
126 |
|
SPARC (both the ISA and the machines): |
127 |
|
o) Implement Adress space identifiers; load/stores etc. |
128 |
|
o) Exception/trap/interrupt handling. |
129 |
|
o) Save/restore register windows etc! Both v9 and pre-v9! |
130 |
o) Finish the subcc and addcc flag computation code. |
o) Finish the subcc and addcc flag computation code. |
131 |
o) Add more registers (floating point, control regs etc) |
o) Add more registers (floating point, control regs etc) |
132 |
o) Disassemly of some more instructions? |
o) Disassemly of some more instructions? |
133 |
o) Are sll etc 32-bit sign-extending or zero-extending? |
o) Are sll etc 32-bit sign-extending or zero-extending? |
134 |
o) Finish the GDB register stuff. |
o) Floating point exception correctness. |
135 |
o) SPARC v8, v7 etc? |
o) SPARC v8, v7 etc? |
136 |
|
o) More machine modes and devices. |
|
Debugger: |
|
|
o) How does SMP debugging work? Does it simply use "threads"? |
|
|
What if the guest OS (running on an emulated SMP machine) |
|
|
has a usertask running, with userland threads? |
|
|
o) Try to make the debugger more modular and, if possible, reentrant! |
|
|
o) Remove the emul command? (But show network info if showing |
|
|
machines?) |
|
|
o) Generalize the expression evaluator. (debugger_expr.c?) |
|
|
settable variables ("show nr of instructions on average") |
|
|
emul[x] defaults to current emul |
|
|
machine[x] defaults to current machine |
|
|
cpu[x] defaults to currently focused cpu |
|
|
registers cpu arch dependent (#-prefix) |
|
|
symbols @-prefix |
|
|
numeric constants decimal, hex, and octal ($-prefix) |
|
|
boolean yes,no, true,false |
|
|
operators (+ - * / % & | ^ !) |
|
|
parentheses for grouping subexpressions |
|
|
NOTE: the change from % to # for register prefix! |
|
|
examples: |
|
|
emul[0].machine[2].cpu[0].pc |
|
|
machine[test2].cpu[1].ra = main |
|
|
settings.show_trace_tree = yes |
|
|
|
|
|
Settings: |
|
|
o) Remove a setting. |
|
|
o) Read/write a setting given a name. (Read as |
|
|
string and/or int64_t simultaneously?) |
|
|
o) Warnings when exiting the emulator, if the |
|
|
settings have not been removed exactly in |
|
|
the same way as they were added? This would |
|
|
improve code cleanliness in the long term. |
|
|
(I.e. require a corresponding _destroy() |
|
|
function for all _new functions... machine_ |
|
|
cpu_ etc.) |
|
|
|
|
|
Help command should have subsections! One for "expressions", |
|
|
mirrored in the documentation, but the internal help should |
|
|
be the one that should be considered correct. |
|
|
o) see src/debugger.c for more |
|
137 |
|
|
138 |
POWER/PowerPC: |
POWER/PowerPC: |
139 |
|
x) Fix DECR timer speed, so it matches the host. |
140 |
|
x) NetBSD/prep 3.x triggers a possible bug in the emulator: |
141 |
|
<wdc_exec_command(0xd005e514,0xd60cdd30,0,8,..)> |
142 |
|
<ata_get_xfer(0,0xd60cdd30,0,8,..)> |
143 |
|
<0x26c550(&ata_xfer_pool,2,0,8,..)> |
144 |
|
<0x35c71c(0x3f27000,0,52,8,..)> |
145 |
|
<ata_exec_xfer(0xd005e4c8,0x3f27000,0,13,..)> |
146 |
|
<atastart(0xd005e4c8,0x3f27000,0,13,..)> |
147 |
|
<__wdccommand_start(0xd005e4c8,0x3f27000,0,13,..)> |
148 |
|
<bsw1(&prep_isa_io_space_tag,0x800001f6,0,176,..)> |
149 |
|
[ wdc: write to SDH: 0xb0 (sectorsize 2, lba=1, drive 1, head 0) ] |
150 |
|
<wdcwait(0xd005e4c8,72,64,0xbb8,..)> |
151 |
|
<0x198120(0xd005e4c8,72,64,0xbb8,..)> |
152 |
|
<bsr1(&prep_isa_io_space_tag,0,0,0xbb8,..)> |
153 |
|
<delay(100,0,0,0xbb8,..)> |
154 |
|
Note: <bsr1(&prep_isa_io_space_tag,0,0,0xbb8,..)> |
155 |
x) PPC optimizations; instr combs |
x) PPC optimizations; instr combs |
156 |
x) 64-bit stuff: either Linux on G5, or perhaps some hobbyist |
x) 64-bit stuff: either Linux on G5, or perhaps some hobbyist |
157 |
version of AIX? (if there exists such a thing) |
version of AIX? (if there exists such a thing) |
|
x) find and fix the bug which causes NetBSD/macppc to fail after |
|
|
an install! |
|
158 |
x) macppc: adb controller; keyboard (for framebuffer mode) |
x) macppc: adb controller; keyboard (for framebuffer mode) |
159 |
x) make OpenBSD/macppc work (PCI controller stuff) |
x) make OpenBSD/macppc work (PCI controller stuff) |
160 |
|
x) Floating point exception correctness. |
161 |
|
x) Alignment exceptions. |
162 |
|
|
163 |
|
PReP: |
164 |
|
x) Clock time! ("Bad battery blah blah") |
165 |
|
|
166 |
Algor: |
Algor: |
167 |
PCI interrupts... needed or stuff like the tlp NIC? |
o) Other models than the P5064? |
168 |
|
o) PCI interrupts... needed for stuff like the tlp NIC? |
169 |
|
|
170 |
|
BeBox: |
171 |
|
o) Interrupts. There seems to be a problem with WDC interrupts |
172 |
|
"after a short while", although a few interrupts get through? |
173 |
|
o) Perhaps find a copy of BeOS and try it? |
174 |
|
|
175 |
|
HPCmips: |
176 |
|
x) Mouse/pad support! :) |
177 |
|
x) A NIC? (As a PCMCIA device?) |
178 |
|
|
179 |
ARM: |
ARM: |
180 |
o) try to get netbsd/evbarm 3.x running (iq80321) |
o) See netwinder_reset() in NetBSD; the current "an internal error |
181 |
|
occured" message after reboot/halt is too ugly. |
182 |
|
o) Generic ARM "wait"-like instruction? |
183 |
|
o) try to get netbsd/evbarm 3.x or 4.x running (iq80321) |
184 |
o) make the xscale counter registers (ccnt) work |
o) make the xscale counter registers (ccnt) work |
185 |
o) make the ata controller usable for FreeBSD! |
o) make the ata controller usable for FreeBSD! |
186 |
o) zaurus for openbsd... |
o) Debian/cats crashes because of unimplemented coproc stuff. |
|
o) debian/cats crashes because of unimplemented coproc stuff. |
|
187 |
fix this? |
fix this? |
188 |
|
|
189 |
|
Test machines: |
190 |
|
o) dev_fb block fill and copy |
191 |
|
o) dev_fb draw characters (from the built-in font)? |
192 |
|
o) dev_fb input device? mouse pointer coordinates and buttons |
193 |
|
(allow changes in these to cause interrupts as well?) |
194 |
|
o) Redefine the halt() function so that it stops "sometimes |
195 |
|
soon", i.e. usage in demo code should be: |
196 |
|
for (;;) { |
197 |
|
halt(); |
198 |
|
} |
199 |
|
|
200 |
|
Debugger: |
201 |
|
o) How does SMP debugging work? Does it simply use "threads"? |
202 |
|
What if the guest OS (running on an emulated SMP machine) |
203 |
|
has a usertask running, with userland threads? |
204 |
|
o) Try to make the debugger more modular and, if possible, reentrant! |
205 |
|
o) Remove the emul command? (But show network info if showing |
206 |
|
machines?) |
207 |
|
o) Memory dumps should be able to dump both physical and |
208 |
|
virtual emulated memory. |
209 |
|
o) Evaluate expressions within []? That would allow stuff like |
210 |
|
cpu[x] where x is an expression. |
211 |
|
o) "pc = pc + 4" doesn't work! Bug. Should work. ("pc=pc+4" works.) |
212 |
|
o) Settings: |
213 |
|
x) Special handlers for Write! |
214 |
|
+) MIPS coproc regs |
215 |
|
+) Alpha/MIPS/SPARC zero registers |
216 |
|
+) x86 64/32/16-bit registers |
217 |
|
x) Value formatter for resulting output. |
218 |
|
o) Call stack display (back-trace) of emulated programs. |
219 |
|
o) Nicer looking output of register dumps, floating point registers, |
220 |
|
etc. Warn about weird/invalid register contents. |
221 |
|
o) Ctrl-C doesn't enter the debugger on some OSes (HP-UX?)... |
222 |
|
|
223 |
|
Dyntrans: |
224 |
|
x) For 32-bit emulation modes, that have emulated TLBs: tlbindex |
225 |
|
arrays of mapped pages? Things to think about: |
226 |
|
x) Only 32-bit mode! (64-bit => too much code) |
227 |
|
x) One array for global pages, and one array _PER ASID_, |
228 |
|
for those archs that support that. On M88K, there should |
229 |
|
be one array for userspace, and one for supervisor, etc. |
230 |
|
x) Larger-than-4K-pages must fill several bits in the array. |
231 |
|
x) No TLB search will be necessary. |
232 |
|
x) Total host space used, for 4 KB pages: 1 MB per table, |
233 |
|
i.e. 65 MB for 32-bit MIPS, 2 MB for M88K, if one byte |
234 |
|
is used as the tlb index. |
235 |
|
x) (The index is actually +1, so that 0 means no hit.) |
236 |
|
x) "Merge" the cur_physpage and cur_ic_page variables/pointers to |
237 |
|
one? I.e. change cur_ic_page to cur_physpage.ic_page or something. |
238 |
|
x) Instruction combination collisions? How to avoid easily... |
239 |
|
x) Think about how to do both SHmedia and SHcompact in a reasonable |
240 |
|
way! (Or AMD64 long/protected/real, for that matter.) |
241 |
|
x) 68K emulation; think about how to do variable instruction |
242 |
|
lengths across page boundaries. |
243 |
|
x) Dyntrans with valgrind-inspired memory checker. (In memory_rw, |
244 |
|
it would be reasonably simple to add; in each individual fast |
245 |
|
load/store routine = a lot more work, and it would become |
246 |
|
kludgy very fast.) |
247 |
|
x) Dyntrans with SMP... lots of work to be done here. |
248 |
|
x) Dyntrans with cache emulation... lots of work here as well. |
249 |
|
x) Remove the concept of base RAM completely; it would be more |
250 |
|
generic to allow RAM devices to be used "anywhere". |
251 |
|
o) dev_mp doesn't work well with dyntrans yet |
252 |
|
o) In general, IPIs, CAS, LL/SC etc must be made to work with dyntrans |
253 |
|
x) Redesign/rethink the delay slot mechanism used for e.g. MIPS, |
254 |
|
so that it caches a translation (that is, an instruction |
255 |
|
word and the instr_call it was translated to the last |
256 |
|
time), so that it doesn't need to do slow |
257 |
|
to_be_translated for each end of page? |
258 |
|
x) Program Counter statistics: |
259 |
|
Per machine? What about SMP? All data to the same file? |
260 |
|
A debugger command should be possible to use to enable/ |
261 |
|
disable statistics gathering. |
262 |
|
Configuration file option! |
263 |
|
x) Breakpoints: |
264 |
|
o) Physical vs virtual addresses! |
265 |
|
o) 32-bit vs 64-bit sign extension for MIPS, and others? |
266 |
|
x) INVALIDATION should cause translations in _all_ cpus to be |
267 |
|
invalidated, e.g. on a write to a write-protected page |
268 |
|
(containing code) |
269 |
|
x) 16-bit encodings? (MIPS16, ARM Thumb, 32-bit SH on SH64) |
270 |
|
x) Lots of other stuff: see src/cpus/README_DYNTRANS |
271 |
|
x) Native code generation backends: |
272 |
|
o) calculate at runtime whether or not chunks of emulated |
273 |
|
(physical) memory are worth translating to native code |
274 |
|
(it is assumed that it has high overhead) |
275 |
|
o) experiment with calling the host's cc and ld externally; |
276 |
|
extremely high overhead, but could be interesting none- |
277 |
|
theless. |
278 |
|
o) experiment with using LLVM, or GNU Lightning? |
279 |
|
o) Important cases to think about: |
280 |
|
x) loads/stores |
281 |
|
x) delay branches |
282 |
|
x) other kinds of calls, branches |
283 |
|
o) branches to already translated code blocks can |
284 |
|
link the blocks together (block-chaining), although |
285 |
|
I'll probably want to wait with this until other |
286 |
|
things work. |
287 |
|
o) The first tests should be done with "testm88k", because |
288 |
|
that does not affect other modes. |
289 |
|
|
290 |
|
------------------------------------------------------------------------------- |
291 |
|
|
292 |
|
Performance comparison when emulating the QEMU_MIPS machine (QEMU's default |
293 |
|
MIPS machine mode): |
294 |
|
|
295 |
|
mips-test-0.2: |
296 |
|
-------------- |
297 |
|
|
298 |
|
1. while true; do ls -l > /dev/null; echo -n .; done, 80x36 dots |
299 |
|
2. while true; do /usr/bin/md5sum /usr/bin/* > /dev/null; echo -n .; done, 80 dots |
300 |
|
3. while true; do grep hej lib/libc.so.6 > /dev/null; echo -n .; done, 80 dots |
301 |
|
|
302 |
|
Test 1 Test 2 Test 3 |
303 |
|
------ ------ ------ |
304 |
|
QEMU 0.9.0: 2 min 20 sec 45 sec 4 min 41 seconds |
305 |
|
GXemul-20070608: 1 min 59 sec 3 min 18 sec 18 min 10 seconds [A] |
306 |
|
|
307 |
|
|
308 |
|
[A] = Normal portable dyntrans, no native code generation. |
309 |
|
|
310 |
|
------------------------------------------------------------------------------- |
311 |
|
|
312 |
|
|
313 |
|
Simple Valgrind-like checks? |
314 |
|
o) Mark every address with bits which tell whether or not the address |
315 |
|
has been written to. |
316 |
|
o) What should happen when programs are loaded? Text/data, bss (zero |
317 |
|
filled). But stack space and heap is uninitialized. |
318 |
|
o) Uninitialized local variables: |
319 |
|
A load from a place on the stack which has not previously |
320 |
|
been stored to => warning. Increasing the stack pointer using |
321 |
|
any available means should reset the memory to uninitialized. |
322 |
|
o) If calls to malloc() and free() can be intercepted: |
323 |
|
o) Access to a memory area after free() => warning. |
324 |
|
o) Memory returned by malloc() is marked as not-initialized. |
325 |
|
o) Non-passive, but good to have: Change the argument |
326 |
|
given to malloc, to return a slightly larger memory |
327 |
|
area, i.e. margin_before + size + margin_after, |
328 |
|
and return the pointer + margin_before. |
329 |
|
Any access to the margin_before or _after space results |
330 |
|
in warnings. (free() must be modified to free the |
331 |
|
actually allocated address.) |
332 |
|
|
333 |
|
Better CD Image file support: |
334 |
|
x) Support CD formats that contain more than 1 track, e.g. |
335 |
|
CDI files (?). These can then contain a mixture of e.g. sound |
336 |
|
and data tracks, and booting from an ISO filesystem path |
337 |
|
would boot from [by default] the first data track. |
338 |
|
(This would make sense for e.g. Dreamcast CD images, or |
339 |
|
possibly other live-CD formats.) |
340 |
|
|
341 |
|
Networking: |
342 |
|
x) Redesign of the networking subsystem, at least the NAT translation |
343 |
|
part. The current way of allowing raw ethernet frames to be |
344 |
|
transfered to/from the emulator via UDP should probably be |
345 |
|
extended to allow the frames to be transmitted other ways as |
346 |
|
well. |
347 |
|
x) Also adding support for connecting ttys (either to xterms, or to |
348 |
|
pipes/sockets etc, or even to PPP->NAT or SLIP->NAT :-). |
349 |
|
x) Documentation updates (!) are very important, making it easier to |
350 |
|
use the (already existing) network emulation features. |
351 |
|
x) Fix performance problems caused by only allowing a |
352 |
|
single TCP packet to be unacked. |
353 |
|
x) Don't hardcode offsets into packets! |
354 |
|
x) Test with lower than 100 max tcp/udp connections, |
355 |
|
to make sure that reuse works! |
356 |
|
x) Make OpenBSD work better as a guest OS! |
357 |
|
x) DHCP? Debian doesn't actually send DHCP packets, even |
358 |
|
though it claims to? So it is hard to test. |
359 |
|
x) Multiple networks per emulation, and let different |
360 |
|
NICs in machines connect to different networks. |
361 |
|
x) Support VDE (vde.sf.net)? Easiest/cleanest (before a |
362 |
|
redesign of the network framework has been done) is |
363 |
|
probably to connect it using the current (udp) solution. |
364 |
|
x) Allow SLIP connections, possibly PPP, in addition to |
365 |
|
ethernet? |
366 |
|
|
367 |
Cache simulation: |
Cache simulation: |
368 |
o) Command line flags for: |
o) Command line flags for: |
369 |
o) CPU endianness? |
o) CPU endianness? |
380 |
is another option (easier to implement, but very very slow). |
is another option (easier to implement, but very very slow). |
381 |
|
|
382 |
Documentation: |
Documentation: |
383 |
o) machines, cpus, devices. |
x) Update the documentation regarding the testmachine interrupts. |
384 |
o) Automagic documentation generation: |
x) Note about sandboxing/security: |
385 |
|
Not all emulated instructions fail in the way they would |
386 |
|
do on real hardware (e.g. a userspace program writing to |
387 |
|
a system register might work in GXemul, but it would |
388 |
|
fail on real hardware). Sandbox = contain from the |
389 |
|
host OS. But the emulated programs will run "less |
390 |
|
securely". |
391 |
|
x) Try NetBSD/arc 4.x! (It seems to work with disk images!) |
392 |
|
x) NetBSD/pmax 4 install instructions: xterm instead of vt100! |
393 |
|
x) BETTER DEVICE EXAMPLES! |
394 |
|
o) Move away from technical.html to somewhere new. |
395 |
|
o) DEVICE_TICK |
396 |
|
o) Implement example devices using interrupts, dyntrans |
397 |
|
memory access, etc.? |
398 |
|
x) Document the dyntrans core? |
399 |
|
x) Rewrite the section about experimental devices, after the |
400 |
|
framebuffer acceleration has been implemented, and demos |
401 |
|
written. (Symbolic names instead of numbers; example |
402 |
|
use cases, etc. Mention demo files that use the various |
403 |
|
features?) |
404 |
|
x) "a very simple linear framebuffer device (for graphics output)" |
405 |
|
under "which machines does gxemul emulate" ==> better |
406 |
|
description? |
407 |
|
x) Better description on how to set up a cross compiler? |
408 |
|
Example for MIPS64. |
409 |
|
o) Automagic documentation generation? |
410 |
|
x) machines, cpus, devices. |
411 |
x) REMEMBER that several machines/devices can be in |
x) REMEMBER that several machines/devices can be in |
412 |
the same source file! |
the same source file! |
413 |
o) Try to rewrite the install instructions for those machines |
o) Try to rewrite the install instructions for those machines |
414 |
that use 3MAX into using CATS? (To remove the need to a raw |
that use 3MAX into using CATS or hpcmips? (To remove the need |
415 |
ffs partition using up all of the disk image.) |
to use a raw ffs partition, using up all of the disk image.) |
|
|
|
|
More generic out_of_memory error reporting, and check everywhere! |
|
|
Causes: OpenBSD has low default limits for normal users. |
|
|
Host is 32-bit? (32-bit hosts are limited to 4 GB or less |
|
|
of userspace memory.) |
|
|
You are actually low on RAM. (As trivial as this might sound, |
|
|
Unix systems usually allow processes to allocate virtual |
|
|
memory beyond the amount of RAM in the machine.) |
|
|
|
|
|
Breakpoints: 32-bit vs 64-bit sign extension for MIPS, warnings, etc. |
|
|
Use the debugger's symbolic name stuff. (which will have to be |
|
|
extended soon to support stuff like "2*x + symbol + y" etc. cool |
|
|
stuff) |
|
416 |
|
|
417 |
The Device subsystem: |
The Device subsystem: |
418 |
x) allow devices to be moved and/or changed in size (down to a |
x) allow devices to be moved and/or changed in size (down to a |
419 |
minimum size, etc, or up to a max size) |
minimum size, etc, or up to a max size); if there is a collision, |
420 |
|
return false. It is up to the caller to handle this situation! |
421 |
|
x) NOTE: Translations must be invalidated, both for |
422 |
|
registering new devices, and for moving existing ones. |
423 |
|
cpu->invalidate translation caches, for all CPUs that |
424 |
|
are connected to a specific memory. |
425 |
x) keep track of interrupts and busses? actually, allowing any device |
x) keep track of interrupts and busses? actually, allowing any device |
426 |
to be a bus might be a nice idea. |
to be a bus might be a nice idea. |
427 |
x) turn interrupt controllers into devices? :-) |
x) turn interrupt controllers into devices? :-) |
428 |
x) refactor various clocks/nvram/cmos into one device? |
x) refactor various clocks/nvram/cmos into one device? |
429 |
|
|
|
Clocks: |
|
|
x) General framework for automagic clock adjustment for _all_ |
|
|
kinds of clocks and timers. (Which should be possible to turn |
|
|
off, of course, like the way DECstation emulation works now.) |
|
|
|
|
430 |
PCI: |
PCI: |
431 |
|
x) Pretty much everything related to runtime configuration, device |
432 |
|
slots, interrupts, etc must be redesigned/cleaned up. The current |
433 |
|
code is very hardcoded and ugly. |
434 |
|
o) Allow cards to be added/removed during runtime more easily. |
435 |
|
o) Allow cards to be enabled/disabled (i/o ports, etc, like |
436 |
|
NetBSD needs for disk controller detection). |
437 |
|
o) Allow devices to be moved in memory during runtime. |
438 |
|
o) Interrupts per PCI slot, etc. (A-D). |
439 |
|
o) PCI interrupt controller logic... very hard to get right, |
440 |
|
because these differ a lot from one machine to the next. |
441 |
x) last write was ffffffff ==> fix this, it should be used |
x) last write was ffffffff ==> fix this, it should be used |
442 |
together with a mask to get the correct bits. also, not ALL |
together with a mask to get the correct bits. also, not ALL |
443 |
bits are size bits! (lowest 4 vs lowest 2?) |
bits are size bits! (lowest 4 vs lowest 2?) |
444 |
x) add support for address fixups |
x) add support for address fixups |
445 |
x) generalize the interrupt routing stuff (lines etc). this should |
x) generalize the interrupt routing stuff (lines etc) |
|
be per machine? or per bus, that's better |
|
|
x) add a "pcn" NIC (AMD PCnet32 Lance 79c970 (PCI 1022:2000)), |
|
|
could be useful for several machine modes (Malta, Algor, evbarm, |
|
|
hp700?, macppc, etc.) |
|
|
|
|
|
Network layer: |
|
|
o) DHCP (for Debian and BSD installers :-) |
|
|
o) increase performance |
|
|
o) don't rely on NetBSD-ish usage |
|
|
o) Multiple networks per emulation, and let different |
|
|
NICs in machines connect to different networks. |
|
|
o) many other issues: see src/net.c |
|
446 |
|
|
447 |
Busses: |
Clocks and timers: |
448 |
o) Redesign the entire "mainbus" concept! |
x) Fix the PowerPC DECR interrupt speed! (MacPPC and PReP speed, etc.) |
449 |
o) Busses should be placed in a hierarchical tree! |
x) DON'T HARDCODE 100 HZ IN cpu_mips_coproc.c! |
450 |
o) Easily configurable interrupt routing in SMP systems. |
x) NetWinder timeofday is incorrect! Huh? grep -R for ta_rtc_read in |
451 |
o) Specific clock/bus speeds, cpu speeds etc. |
NetBSD sources; it doesn't seem to be initialized _AT ALL_?! |
452 |
o) Synchronization over network? or at least in dyntrans within |
x) Cobalt TOD is incorrect! |
453 |
one emulated machine |
x) Go through all other machines, one by one, and fix them. |
|
o) dev->bus: TurboChannel, PCMCIA, ADB? |
|
454 |
|
|
455 |
Config file parser: |
Config file parser: |
456 |
o) Rewrite it from scratch! |
o) Rewrite it from scratch! |
457 |
o) Usage of any expression available through the debugger |
o) Usage of any expression available through the debugger |
458 |
|
o) Allow interrupt controllers to be added! and interrupts |
459 |
|
to be used in more ways than before |
460 |
o) Support for running debugger commands (like the -c |
o) Support for running debugger commands (like the -c |
461 |
command line option) |
command line option) |
462 |
|
|
463 |
Floating point layer: |
Floating point layer: |
464 |
o) make it common enough to be used by _all_ emulation modes |
o) make it common enough to be used by _all_ emulation modes |
465 |
o) implement more stuff |
o) implement correct error/exception handling and rounding modes |
466 |
|
o) implement more helper functions (i.e. add, sub, mul...) |
467 |
o) non-IEEE modes (i.e. x86)? |
o) non-IEEE modes (i.e. x86)? |
468 |
|
|
469 |
Userland emulation: |
Userland emulation: |
470 |
x) Lots of stuff; freebsd and netbsd (and linux?) syscalls. |
x) Try to prefix "/emul/mips/" or similar to all filenames, |
471 |
x) Dynamic linking? Hm. |
and only if that fails, try the given filename. |
472 |
|
Read this setting from an environment variable, and only |
473 |
|
if there is none, fall back to hardcoded string. |
474 |
|
x) File descriptor (0,1,2) assumptions? Find and fix these? |
475 |
|
x) Dynamic linking! |
476 |
|
x) Lots of stuff; freebsd, netbsd, linux, ... syscalls. |
477 |
|
x) Initial register/stack contents (environment, command line args). |
478 |
|
x) Return value (from main). |
479 |
|
x) mmap emulation layer |
480 |
|
x) errno emulation layer |
481 |
|
x) struct conversions for many syscalls |
482 |
|
|
483 |
Sound: |
Sound: |
484 |
x) generic sound framework |
x) generic sound framework |
485 |
x) add one or more sound cards as devices |
x) add one or more sound cards as devices; add a testmachine |
486 |
|
sound card first? |
487 |
|
x) Dreamcast sound? Generic PCI sound cards? |
488 |
|
|
489 |
ASC SCSI controller: |
ASC SCSI controller: |
490 |
x) NetBSD/arc 2.0 uses the ASC controller in a way which GXemul |
x) NetBSD/arc 2.0 uses the ASC controller in a way which GXemul |
491 |
cannot yet handle. (NetBSD 1.6.2 works ok.) (Possibly a problem |
cannot yet handle. (NetBSD 1.6.2 works ok.) (Possibly a problem |
492 |
in NetBSD itself, http://mail-index.netbsd.org/source-changes/ |
in NetBSD itself, http://mail-index.netbsd.org/source-changes/ |
493 |
2005/11/06/0024.html suggests that.) |
2005/11/06/0024.html suggests that.) |
494 |
|
NetBSD 4.x seems to work? :) |
495 |
|
|
496 |
Caches / memory hierarchies: (this is mostly MIPS-specific) |
Caches / memory hierarchies: (this is mostly MIPS-specific) |
497 |
o) src/memory*.c: Implement correct cache emulation for |
o) src/memory*.c: Implement correct cache emulation for |
510 |
possible. |
possible. |
511 |
|
|
512 |
File/disk/symbol handling: |
File/disk/symbol handling: |
513 |
|
o) Make sure that disks can be added/removed during runtime! |
514 |
|
(Perhaps this needs a reasonably large re-write.) |
515 |
o) Remove some of the complexity in file format guessing, for |
o) Remove some of the complexity in file format guessing, for |
516 |
Ultrix kernels that are actually disk images? |
Ultrix kernels that are actually disk images? |
517 |
o) Better handling of tape files |
o) Better handling of tape files |
518 |
o) Read function argument count and types from binaries? (ELF?) |
o) Read function argument count and types from binaries? (ELF?) |
519 |
o) Better demangling of C++ names. Note: GNU's C++ differs from e.g. |
o) Better demangling of C++ names. Note: GNU's C++ differs from e.g. |
520 |
Microsoft's C++, so multiple schemes must be possible. See |
Microsoft's C++, so multiple schemes must be possible. See |
523 |
Userland ABI emulation: |
Userland ABI emulation: |
524 |
o) see src/useremul.c |
o) see src/useremul.c |
525 |
|
|
|
Terminal/console: |
|
|
o) allow emulated serial ports to be connected to the outside |
|
|
world in a more generic way, or even to other emulated |
|
|
machines(?) |
|
|
|
|
|
Save state of the whole emulated machine, to be able to load it back |
|
|
in later? (Memory, all device's states, all registers and |
|
|
so on. Like taking a snapshot. (SimOS seems to do this, |
|
|
according to its website.)) |
|
|
|
|
526 |
Better framebuffer and X-windows functionality: |
Better framebuffer and X-windows functionality: |
527 |
|
o) Generalize the update_x1y1x2y2 stuff to an extend-region() |
528 |
|
function... |
529 |
o) -Yx sometimes causes crashes. |
o) -Yx sometimes causes crashes. |
530 |
o) Simple device access to framebuffer_blockcopyfill() etc, |
o) Simple device access to framebuffer_blockcopyfill() etc, |
531 |
and text output (using the built-in fonts), for dev_fb. |
and text output (using the built-in fonts), for dev_fb. |
536 |
o) Non-resizable windows? Or choose scaledown depending |
o) Non-resizable windows? Or choose scaledown depending |
537 |
on size (and center the image, with a black border). |
on size (and center the image, with a black border). |
538 |
o) Different scaledown on different windows? |
o) Different scaledown on different windows? |
539 |
|
o) Non-integral scale-up? (E.g. 640x480 -> 1024x768) |
540 |
o) Switch scaledown during runtime? (Ala CTRL-ALT-plus/minus) |
o) Switch scaledown during runtime? (Ala CTRL-ALT-plus/minus) |
541 |
o) Bug reported by Elijah Rutschman on MacOS with weird |
o) Bug reported by Elijah Rutschman on MacOS with weird |
542 |
keys (F5 = cursor down?). |
keys (F5 = cursor down?). |
550 |
o) Generalize the framebuffer stuff by moving _ALL_ X11 |
o) Generalize the framebuffer stuff by moving _ALL_ X11 |
551 |
specific code to src/x11.c! |
specific code to src/x11.c! |
552 |
|
|
553 |
Statistics: (this could be interesting) |
------------------------------------------------------------------------------- |
|
o) Save to file and show graphics. It should be possible to |
|
|
run gxemul after a simulation to just show the graphics, |
|
|
or convert to a .ppm or .tga or similar. |
|
|
o) memory accesses (to measure cache efficiency and |
|
|
page coloring efficiency) |
|
|
o) nr of simultaneous ASIDs in use in the TLB, for MIPS |
|
|
o) percentage of time spent in different "states", such as |
|
|
running userland code, kernel code, or idling (for CPUs |
|
|
that have such an instruction, or whenever the PC is |
|
|
inside a specific idle-function (address range)). |
|
|
Possible additional state (for example on R3000): caches |
|
|
disabled. |
|
|
o) position of read/write on (SCSI) disks |
|
554 |
|
|