This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Contents of /trunk/RELEASE

Parent Directory Parent Directory | Revision Log Revision Log

Revision 32 - (show annotations)
Mon Oct 8 16:20:58 2007 UTC (13 years, 3 months ago) by dpavlin
File size: 8673 byte(s)
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1421 2006/11/06 05:32:37 debug Exp $
20060816	Adding a framework for emulated/virtual timers (src/timer.c),
		using only setitimer().
		Rewriting the mc146818 to use the new timer framework.
20060817	Adding a call to gettimeofday() every now and then (once every
		second, at the moment) to resynch the timer if it drifts.
		Beginning to convert the ISA timer interrupt mechanism (8253
		and 8259) to use the new timer framework.
		Removing the -I command line option.
20060819	Adding the -I command line option again, with new semantics.
		Working on Footbridge timer interrupts; NetBSD/NetWinder and
		NetBSD/CATS now run at correct speed, but unfortunately with
		HUGE delays during bootup.
20060821	Some minor m68k updates. Adding the first instruction: nop. :)
		Minor Alpha emulation updates.
20060822	Adding a FreeBSD development specific YAMON environment
		variable ("khz") (as suggested by Bruce M. Simpson).
		Moving YAMON environment variable initialization from
		machine_evbmips.c into promemul/yamon.c, and adding some more
		Continuing on the LCA PCI bus controller (for Alpha machines).
20060823	Continuing on the timer stuff: experimenting with MIPS count/
		compare interrupts connected to the timer framework.
20060825	Adding bogus SCSI commands 0x51 (SCSICDROM_READ_DISCINFO) and
		0x52 (SCSICDROM_READ_TRACKINFO) to the SCSI emulation layer,
		to allow NetBSD/pmax 4.0_BETA to be installed from CDROM.
		Minor updates to the LCA PCI controller.
20060827	Implementing a CHIP8 cpu mode, and a corresponding CHIP8
		machine, for fun. Disassembly support for all instructions,
		and most of the common instructions have been implemented: mvi,
		mov_imm, add_imm, jmp, rand, cls, sprite, skeq_imm, jsr,
		skne_imm, bcd, rts, ldr, str, mov, or, and, xor, add, sub,
		font, ssound, sdelay, gdelay, bogus skup/skpr, skeq, skne.
20060828	Beginning to convert the CHIP8 cpu in the CHIP8 machine to a
		(more correct) RCA 180x cpu. (Disassembly for all 1802
		instructions has been implemented, but no execution yet, and
		no 1805 extended instructions.)
20060829	Minor Alpha emulation updates.
20060830	Beginning to experiment a little with PCI IDE for SGI O2.
		Fixing the cursor key mappings for MobilePro 770 emulation.
		Fixing the LK201 warning caused by recent NetBSD/pmax.
		The MIPS R41xx standby, suspend, and hibernate instructions now
		behave like the RM52xx/MIPS32/MIPS64 wait instruction.
		Fixing dev_wdc so it calculates correct (64-bit) offsets before
		giving them to diskimage_access().
20060831	Continuing on Alpha emulation (OSF1 PALcode).
20060901	Minor Alpha updates; beginning on virtual memory pagetables.
		Removed the limit for max nr of devices (in preparation for
		allowing devices' base addresses to be changed during runtime).
		Adding a hack for MIPS [d]mfc0 select 0 (except the count
		register), so that the coproc register is simply copied.
		The MIPS suspend instruction now exits the emulator, instead
		of being treated as a wait instruction (this causes NetBSD/
		hpcmips to get correct 'halt' behavior).
		The VR41xx RTC now returns correct time.
		Connecting the VR41xx timer to the timer framework (fixed at
		128 Hz, for now).
		Continuing on SPARC emulation, adding more instructions:
		restore, ba_xcc, ble. The rectangle drawing demo works :)
		Removing the last traces of the old ENABLE_CACHE_EMULATION
		MIPS stuff (not usable with dyntrans anyway).
20060902	Splitting up src/net.c into several smaller files in its own
		subdirectory (src/net/).
20060903	Cleanup of the files in src/net/, to make them less ugly.
20060904	Continuing on the 'settings' subsystem.
		Minor progress on the SPARC emulation mode.
20060905	Cleanup of various things, and connecting the settings
		infrastructure to various subsystems (emul, machine, cpu, etc).
		Changing the lk201 mouse update routine to not rely on any
		emulated hardware framebuffer cursor coordinates, but instead
		always do (semi-usable) relative movements.
20060906	Continuing on the lk201 mouse stuff. Mouse behaviour with
		multiple framebuffers (which was working in Ultrix) is now
		semi-broken (but it still works, in a way).
		Moving the documentation about networking into its own file
		(networking.html), and refreshing it a bit. Adding an example
		of how to use ethernet frame direct-access (udp_snoop).
20060907	Continuing on the settings infrastructure.
20060908	Minor updates to SH emulation: for 32-bit emulation: delay
		slots and the 'jsr @Rn' instruction. I'm putting 64-bit SH5 on
		ice, for now.
20060909-10	Implementing some more 32-bit SH instructions. Removing the
		64-bit mode completely. Enough has now been implemented to run
		the rectangle drawing demo. :-)
20060912	Adding more SH instructions.
20060916	Continuing on SH emulation (some more instructions: div0u,
		div1, rotcl/rotcr, more mov instructions, dt, braf, sets, sett,
		tst_imm, dmuls.l, subc, ldc_rm_vbr, movt, clrt, clrs, clrmac).
		Continuing on the settings subsystem (beginning on reading/
		writing settings, removing bugs, and connecting more cpus to
		the framework).
20060919	More work on SH emulation; adding an ldc banked instruction,
		and attaching a 640x480 framebuffer to the Dreamcast machine
		mode (NetBSD/dreamcast prints the NetBSD copyright banner :-),
		and then panics).
20060920	Continuing on the settings subsystem.
20060921	Fixing the Footbridge timer stuff so that NetBSD/cats and
		NetBSD/netwinder boot up without the delays.
20060922	Temporarily hardcoding MIPS timer interrupt to 100 Hz. With
		'wait' support disabled, NetBSD/malta and Linux/malta run at
		correct speed.
20060923	Connecting dev_gt to the timer framework, so that NetBSD/cobalt
		runs at correct speed.
		Moving SH4-specific memory mapped registers into its own
		device (dev_sh4.c).
		Running with -N now prints "idling" instead of bogus nr of
		instrs/second (which isn't valid anyway) while idling.
20060924	Algor emulation should now run at correct speed.
		Adding disassembly support for some MIPS64 revision 2
		instructions: ext, dext, dextm, dextu.
20060926	The timer framework now works also when the MIPS wait
		instruction is used.
20060928	Re-implementing checks for coprocessor availability for MIPS
		cop0 instructions. (Thanks to Carl van Schaik for noticing the
		lack of cop0 availability checks.)
20060929	Implementing an instruction combination hack which treats
		NetBSD/pmax' idle loop as a wait-like instruction.
20060930	The ENTRYHI_R_MASK was missing in (at least) memory_mips_v2p.c,
		causing TLB lookups to sometimes succeed when they should have
		failed. (A big thank you to Juli Mallett for noticing the
		Adding disassembly support for more MIPS64 revision 2 opcodes
		(seb, seh, wsbh, jalr.hb, jr.hb, synci, ins, dins, dinsu,
		dinsm, dsbh, dshd, ror, dror, rorv, drorv, dror32). Also
		implementing seb, seh, dsbh, dshd, and wsbh.
		Implementing an instruction combination hack for Linux/pmax'
		idle loop, similar to the NetBSD/pmax case.
20061001	Changing the NetBSD/sgimips install instructions to extract
		files from an iso image, instead of downloading them via ftp.
20061002	More-than-31-bit userland addresses in memory_mips_v2p.c were
		not actually working; applying a fix from Carl van Schaik to
		enable them to work + making some other updates (adding kuseg
		Fixing hpcmips (vr41xx) timer initialization.
		Experimenting with O(n)->O(1) reduction in the MIPS TLB lookup
		loop. Seems to work both for R3000 and non-R3000.
20061003	Continuing a little on SH emulation (adding more control
		registers; mini-cleanup of memory_sh.c).
20061004	Beginning on a dev_rtc, a clock/timer device for the test
		machines; also adding a demo, and some documentation.
		Fixing a bug in SH "mov.w @(disp,pc),Rn" (the result wasn't
		sign-extended), and adding the addc and ldtlb instructions.
20061005	Contining on SH emulation: virtual to physical address
		translation, and a skeleton exception mechanism.
20061006	Adding more SH instructions (various loads and stores, rte,
		negc, muls.w, various privileged register-move instructions).
20061007	More SH instructions: various move instructions, trapa, div0s,
		float, fdiv, ftrc.
		Continuing on dev_rtc; removing the rtc demo.
20061008	Adding a dummy Dreamcast PROM module. (Homebrew Dreamcast
		programs using KOS libs need this.)
		Adding more SH instructions: "stc vbr,rn", rotl, rotr, fsca,
		fmul, fadd, various floating-point moves, etc. A 256-byte
		demo for Dreamcast runs :-)
20061012	Adding the SH "lds Rm,pr" and bsr instructions.
20061013	More SH instructions: "sts fpscr,rn", tas.b, and some more
		floating point instructions, cmp/str, and more moves.
		Adding a dummy dev_pvr (Dreamcast graphics controller).
20061014	Generalizing the expression evaluator (used in the built-in
		debugger) to support parentheses and +-*/%^&|.
20061015	Removing the experimental tlb index hint code in
		mips_memory_v2p.c, since it didn't really have any effect.
20061017	Minor SH updates; adding the "sts pr,Rn", fcmp/gt, fneg,
		frchg, and some other instructions. Fixing missing sign-
		extension in an 8-bit load instruction.
20061019	Adding a simple dev_dreamcast_rtc.
		Implementing memory-mapped access to the SH ITLB/UTLB arrays.
20061021	Continuing on various SH and Dreamcast things: sh4 timers,
		debug messages for dev_pvr, fixing some virtual address
		translation bugs, adding the bsrf instruction.
		The NetBSD/dreamcast GENERIC_MD kernel now reaches userland :)
		Adding a dummy dev_dreamcast_asic.c (not really useful yet).
		Implementing simple support for Store Queues.
		Beginning on the PVR Tile Accelerator.
20061022	Generalizing the PVR framebuffer to support off-screen drawing,
		multiple bit-depths, etc. (A small speed penalty, but most
		likely worth it.)
		Adding more SH instructions (mulu.w, fcmp/eq, fsub, fmac,
		fschg, and some more); correcting bugs in "fsca" and "float".
20061024	Adding the SH ftrv (matrix * vector) instruction. Marcus
		Comstedt's "tatest" example runs :) (wireframe only).
		Correcting disassembly for SH floating point instructions that
		use the xd* registers.
		Adding the SH fsts instruction.
		In memory_device_dyntrans_access(), only the currently used
		range is now invalidated, and not the entire device range.
20061025	Adding a dummy AVR32 cpu mode skeleton.
20061026	Various Dreamcast updates; beginning on a Maple bus controller.
20061027	Continuing on the Maple bus. A bogus Controller, Keyboard, and
		Mouse can now be detected by NetBSD and KOS homebrew programs.
		Cleaning up the SH4 Timer Management Unit, and beginning on
		SH4 interrupts.
		Implementing the Dreamcast SYSASIC.
20061028	Continuing on the SYSASIC.
		Adding the SH fsqrt instruction.
		memory_sh.c now actually scans the ITLB.
		Fixing a bug in dev_sh4.c, related to associative writes into
		the memory-mapped UTLB array. NetBSD/dreamcast now reaches
		userland stably, and prints the "Terminal type?" message :-]
		Implementing enough of the Dreamcast keyboard to make NetBSD
		accept it for input.
		Enabling SuperH for stable (non-development) builds.
		Adding NetBSD/dreamcast to the documentation, although it
		doesn't support root-on-nfs yet.
20061029	Changing usleep(1) calls in the debugger to to usleep(10000)
		(according to Brian Foley, this makes GXemul run better on
		MacOS X).
		Making the Maple "Controller" do something (enough to barely
		interact with dcircus.elf).
20061030-31	Some progress on the PVR. More test programs start running (but
		with strange output).
		Various other SH4-related updates.
20061102	Various Dreamcast and SH4 updates; more KOS demos run now.
20061104	Adding a skeleton dev_mb8696x.c (the Dreamcast's LAN adapter).
20061105	Continuing on the MB8696x; NetBSD/dreamcast detects it as mbe0.
		Testing for the release.

==============  RELEASE 0.4.3  ==============

1 Release notes for Gavare's eXperimental Emulator (GXemul), 0.4.3
2 ================================================================
4 Copyright (C) 2003-2006 Anders Gavare.
7 GXemul is an experimental instruction-level machine emulator. Several
8 emulation modes are available. In some modes, processors and surrounding
9 hardware components are emulated well enough to let unmodified operating
10 systems (e.g. NetBSD) run as if they were running on a real machine.
12 The documentation lists the machines and guest operating systems that can
13 be regarded as "working" in GXemul. The best working guest operating
14 systems are probably NetBSD/pmax, NetBSD/cats, and OpenBSD/cats.
17 Changes between release 0.4.2 and 0.4.3 include, among other things:
19 o) SuperH (SH4) emulation is now stable enough to let a NetBSD/dreamcast
20 GENERIC_MD (ramdisk) kernel reach userland.
22 o) There is now a simple framework for letting emulated clocks, as seen
23 by guest operating systems, run at the same speed as the host clock.
25 So far, the DECstation, MobilePro (hpcmips), NetWinder, CATS, Malta
26 (evbmips), Cobalt, Algor, Dreamcast, and testmips machine modes
27 use the new clock/timer framework.
29 o) Some changes to the way expressions are evaluated in the built-in
30 debugger, and some changes in command behaviour:
32 x) Expressions (including assignments) can now be arbitrarily
33 complex, using parentheses, and the following operators:
35 + - * / % (modulo) ^ (xor) & (and) | (or)
37 x) Some internal emulator variables can now be read/written using
38 normal expressions. Examples of commands that did not work
39 earlier, but should work now:
41 print verbose
42 r5 = sp - arch_pagesize * 4
43 machine[0].statistics_enabled = 1
45 x) To force a name to be interpreted as a setting/register name,
46 a hash sign (#) is now used instead of the percentage sign (%).
47 (In the new expression evaluator, % means arithmetic modulo.)
49 x) The 'focus' command now also selects a cpu, in addition to
50 selecting machine and emul.
52 x) The 'reg' command only prints registers for one cpu now, not
53 all cpus in the currently focused machine.
55 o) The wdc (standard IDE controller) had a bug which prevented disk
56 images larger than 2 GB to work correctly. This has been fixed.
58 o) For MIPS emulation, some combinations of emulated processor + guest
59 operating system should now work better when idling (i.e. the host
60 should not run at 100% CPU):
62 x) For MIPS32/MIPS64 and RM5200, the 'wait' instruction should
63 now work more or less as expected.
65 x) For VR41xx (e.g. MobilePro) emulation, the standby instruction
66 should work like the 'wait' instruction.
68 x) For R3000 emulation, where there is no hardware wait instruction,
69 I've implemented "instruction combination" hacks for both
70 NetBSD/pmax and Debian/pmax, so that their cpu idle loops are
71 detected and treated almost as a wait instruction.
73 o) MIPS 64-bit address translation (X=1) was not fully working before;
74 TLB exception handling for xkseg and larger-than-2GB-userland should
75 now actually work. (Thanks to Juli Mallett and Carl van Schaik for
76 noticing these problems.)
78 o) The mouse cursor update routines in DECstation (LK201) emulation
79 previously used the fact that guest OSes set the _hardware_
80 cursor position. In order to support X Windows when emulating
81 modern versions of NetBSD/pmax, which don't set the hardware
82 position anymore, a workaround has been implemented which only
83 sends relative coordinates to the guest OS. This has two drawbacks:
85 1. Ultrix emulation with dual- and tripple-head emulation will
86 most likely feel very strange. It will still work, though.
88 2. Cursor movement feels "accelerated", because the emulator
89 sends unaccelerated movements to the guest OS, which then
90 accelerates them. This can however be compensated to some
91 degree by running 'xset m 1 0' in the guest OS.
93 Having weird accelerated mouse movement is better than having no
94 mouse support at all, so this change was necessary.
96 Please read the HISTORY files for more details.
99 Files included in this release are:
101 HISTORY Detailed revision history / changelog.
102 LICENSE Copyright message / license.
103 README Quick start instructions, for the impatient.
104 RELEASE This file.
105 TODO TODO notes.
106 configure, Makefile.skel sh and make scripts for building GXemul.
107 demos Tutorial-like demos of testmachine functionality.
108 doc Documentation.
109 experiments Experimental code. (Usually not needed.)
110 src Source code.
112 To build the emulator, run the configure script, and then run make. This
113 should work on most Unix-like systems.
116 Regarding files in the src/include/ directory: only some of these are written
117 by me, the rest are from other sources (such as NetBSD). The license text says
118 that "All advertising materials mentioning features or use of this software"
119 must display acknowledgements. Even though I do NOT feel I mention features or
120 use of the header files (the "software") in any advertising materials, I am
121 still very grateful for the fact that these people have made their files
122 available for re-use, so regardless of legal requirements, I guess thanking
123 them like this is in order:
125 This product includes software developed by the University of
126 California, Berkeley and its contributors.
128 This product includes software developed for the
129 NetBSD Project. See http://www.netbsd.org/ for
130 information about NetBSD.
132 This product includes software developed by Jonathan Stone for
133 the NetBSD Project.
135 This product includes software developed for the NetBSD Project
136 by Matthias Drochner.
138 This product includes software developed by the NetBSD
139 Foundation, Inc. and its contributors.
141 This product includes software developed by Christopher G. Demetriou.
142 [for the NetBSD Project.]
144 This product includes software developed by Adam Glass.
146 This product includes software developed by the PocketBSD project
147 and its contributors.
149 This product includes software developed by Peter Galbavy.
151 Carnegie Mellon University (multiple header files,
152 no specific advertisement text required)
154 This product includes software developed by Charles M. Hannum.
156 This product includes software developed under OpenBSD by Per Fogelström.
158 This product includes software developed by Per Fogelström.
160 This product includes software developed at Ludd, University of
161 Luleå, Sweden and its contributors.
163 This product includes software developed by Hellmuth Michaelis
164 and Joerg Wunsch
166 The font(s) in devices/fonts are Copyright (c) 1992, 1993, 1994
167 by Hellmuth Michaelis and Joerg Wunsch. ("This product includes software
168 developed by Hellmuth Michaelis and Joerg Wunsch", well, the font
169 is maybe not software, but still...)
171 impactsr-bsd.h is Copyright (C) 2004 by Stanislaw Skowronek.
173 This product includes software developed for the NetBSD Project by
174 Wasabi Systems, Inc. [by Simon Burge]
176 arcbios_other.h is Copyright (c) 1996 M. Warner Losh.
178 This product includes software developed by Marc Horowitz.
180 This product includes software developed by Brini.
182 This product includes software developed by Mark Brinicombe
183 for the NetBSD Project.
185 This product includes software developed by TooLs GmbH.
187 This product includes software developed by Manuel Bouyer.
189 This product includes software developed by the Alice Group.
191 This product includes software developed by Ichiro FUKUHARA.
193 This product includes software developed by Marcus Comstedt.
195 Also, src/include/alpha_rpb.h requires the following:
197 Copyright (c) 1994, 1995, 1996 Carnegie-Mellon University.
198 All rights reserved.
200 Author: Keith Bostic, Chris G. Demetriou
202 Permission to use, copy, modify and distribute this software and
203 its documentation is hereby granted, provided that both the copyright
204 notice and this permission notice appear in all copies of the
205 software, derivative works or modified versions, and any portions
206 thereof, and that both notices appear in supporting documentation.
208 See individual files for license details, if you plan to redistribute GXemul
209 or reuse code.
212 If you have found GXemul useful in some way, or feel like sending me comments
213 or feedback in general, then mail me at anders(at)gavare.se.

  ViewVC Help
Powered by ViewVC 1.1.26