This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Annotation of /trunk/RELEASE

Parent Directory Parent Directory | Revision Log Revision Log

Revision 24 - (hide annotations)
Mon Oct 8 16:19:56 2007 UTC (13 years, 3 months ago) by dpavlin
File size: 7319 byte(s)
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1256 2006/06/23 20:43:44 debug Exp $
20060219	Various minor updates. Removing the old MIPS16 skeleton code,
		because it will need to be rewritten for dyntrans anyway.
20060220-22	Removing the non-working dyntrans backend support.
		Continuing on the 64-bit dyntrans virtual memory generalization.
20060223	More work on the 64-bit vm generalization.
20060225	Beginning on MIPS dyntrans load/store instructions.
		Minor PPC updates (64-bit load/store, etc).
		Fixes for the variable-instruction-length framework, some
		minor AVR updates (a simple Hello World program works!).
		Beginning on a skeleton for automatically generating documen-
		tation (for devices etc.).
20060226	PPC updates (adding some more 64-bit instructions, etc).
		AVR updates (more instructions).
		FINALLY found and fixed the zs bug, making NetBSD/macppc
		accept the serial console.
20060301	Adding more AVR instructions.
20060304	Continuing on AVR-related stuff. Beginning on a framework for
		cycle-accurate device emulation. Adding an experimental "PAL
		TV" device (just a dummy so far).
20060305	Adding more AVR instructions.
		Adding a dummy epcom serial controller (for TS7200 emulation).
20060310	Removing the emul() command from configuration files, so only
		net() and machine() are supported.
		Minor progress on the MIPS dyntrans rewrite.
20060311	Continuing on the MIPS dyntrans rewrite (adding more
		instructions, etc).
20060315	Adding more instructions (sllv, srav, srlv, bgtz[l], blez[l],
		beql, bnel, slti[u], various loads and stores).
20060316	Removing the ALWAYS_SIGNEXTEND_32 option, since it was rarely
		Adding more MIPS dyntrans instructions, and fixing bugs.
20060318	Implementing fast loads/stores for MIPS dyntrans (big/little
		endian, 32-bit and 64-bit modes).
20060320	Making MIPS dyntrans the default configure option; use
		"--enable-oldmips" to use the old bintrans system.
		Adding MIPS dyntrans dmult[u]; minor updates.
20060322	Continuing... adding some more instructions.
		Adding a simple skeleton for demangling C++ "_ZN" symbols.
20060323	Moving src/debugger.c into a new directory (src/debugger/).
20060324	Fixing the hack used to load PPC ELFs (useful for relocated
		Linux/ppc kernels), and adding a dummy G3 machine mode.
20060325-26	Beginning to experiment with GDB remote serial protocol
		connections; adding a -G command line option for selecting
		which TCP port to listen to.
20060330	Beginning a major cleanup to replace things like "0x%016llx"
		with more correct "0x%016"PRIx64, etc.
		Continuing on the GDB remote serial protocol support.
20060331	More cleanup, and some minor GDB remote progress.
20060402	Adding a hack to the configure script, to allow compilation
		on systems that lack PRIx64 etc.
20060406	Removing the temporary FreeBSD/arm hack in dev_ns16550.c and
		replacing it with a better fix from Olivier Houchard.
20060407	A remote debugger (gdb or ddd) can now start and stop the
		emulator using the GDB remote serial protocol, and registers
		and memory can be read. MIPS only for now.
20060408	More GDB progress: single-stepping also works, and also adding
		support for ARM, PowerPC, and Alpha targets.
		Continuing on the delay-slot-across-page-boundary issue.
20060412	Minor update: beginning to add support for the SPARC target
		to the remote GDB functionality.
20060414	Various MIPS updates: adding more instructions for dyntrans
		(eret, add), and making some exceptions work. Fixing a bug
		in dmult[u].
		Implementing the first SPARC instructions (sethi, or).
20060415	Adding "magic trap" instructions so that PROM calls can be
		software emulated in MIPS dyntrans.
		Adding more MIPS dyntrans instructions (ddiv, dadd) and
		fixing another bug in dmult.
20060416	More MIPS dyntrans progress: adding [d]addi, movn, movz, dsllv,
		rfi, an ugly hack for supporting R2000/R3000 style faked caches,
		preliminary interrupt support, and various other updates and
20060417	Adding more SPARC instructions (add, sub, sll[x], sra[x],
		srl[x]), and useful SPARC header definitions.
		Adding the first (trivial) x86/AMD64 dyntrans instructions (nop,
		cli/sti, stc/clc, std/cld, simple mov, inc ax). Various other
		x86 updates related to variable instruction length stuff.
		Adding unaligned loads/stores to the MIPS dyntrans mode (but
		still using the pre-dyntrans (slow) imlementation).
20060419	Fixing a MIPS dyntrans exception-in-delay-slot bug.
		Removing the old "show opcode statistics" functionality, since
		it wasn't really useful and isn't implemented for dyntrans.
		Single-stepping (or running with instruction trace) now looks
		ok with dyntrans with delay-slot architectures.
20060420	Minor hacks (removing the -B command line option when compiled
		for non-bintrans, and some other very minor updates).
		Adding (slow) MIPS dyntrans load-linked/store-conditional.
20060422	Applying fixes for bugs discovered by Nils Weller's nwcc
		(static DEC memmap => now per machine, and adding an extern
		keyword in cpu_arm_instr.c).
		Finally found one of the MIPS dyntrans bugs that I've been
		looking for (copy/paste spelling error BIG vs LITTLE endian in
		cpu_mips_instr_loadstore.c for 16-bit fast stores).
		FINALLY found the major MIPS dyntrans bug: slti vs sltiu
		signed/unsigned code in cpu_mips_instr.c. :-)
		Adding more MIPS dyntrans instructions (lwc1, swc1, bgezal[l],
		ctc1, tlt[u], tge[u], tne, beginning on rdhwr).
		NetBSD/hpcmips can now reach userland when using dyntrans :-)
		Adding some more x86 dyntrans instructions.
		Finally removed the old Alpha-specific virtual memory code,
		and replaced it with the generic 64-bit version.
		Beginning to add disassembly support for SPECIAL3 MIPS opcodes.
20060423	Continuing on the delay-slot-across-page-boundary issue;
		adding an end_of_page2 ic slot (like I had planned before, but
		had removed for some reason).
		Adding a quick-and-dirty fallback to legacy coprocessor 1
		code (i.e. skipping dyntrans implementation for now).
		NetBSD/hpcmips and NetBSD/pmax (when running on an emulated
		R4400) can now be installed and run. :-)  (Many bugs left
		to fix, though.)
		Adding more MIPS dyntrans instructions: madd[u], msub[u].
		Cleaning up the SPECIAL2 vs R5900/TX79/C790 "MMI" opcode
		maps somewhat (disassembly and dyntrans instruction decoding).
20060424	Adding an isa_revision field to mips_cpu_types.h, and making
		sure that SPECIAL3 opcodes cause Reserved Instruction
		exceptions on MIPS32/64 revisions lower than 2.
		Adding the SPARC 'ba', 'call', 'jmpl/retl', 'and', and 'xor'
20060425	Removing the -m command line option ("run at most x 
		instructions") and -T ("single_step_on_bad_addr"), because
		they never worked correctly with dyntrans anyway.
		Freshening up the man page.
20060428	Adding more MIPS dyntrans instructions: bltzal[l], idle.
		Enabling MIPS dyntrans compare interrupts.
20060429	FINALLY found the weird dyntrans bug, causing NetBSD etc. to
		behave strangely: some floating point code (conditional
		coprocessor branches) could not be reused from the old
		non-dyntrans code. The "quick-and-dirty fallback" only appeared
		to work. Fixing by implementing bc1* for MIPS dyntrans.
		More MIPS instructions: [d]sub, sdc1, ldc1, dmtc1, dmfc1, cfc0.
		Freshening up MIPS floating point disassembly appearance.
20060430	Continuing on C790/R5900/TX79 disassembly; implementing 128-bit
		"por" and "pextlw".
20060504	Disabling -u (userland emulation) unless compiled as unstable
		development version.
		Beginning on freshening up the testmachine include files,
		to make it easier to reuse those files (placing them in
		src/include/testmachine/), and beginning on a set of "demos"
		or "tutorials" for the testmachine functionality.
		Minor updates to the MIPS GDB remote protocol stub.
		Refreshing doc/experiments.html and gdb_remote.html.
		Enabling Alpha emulation in the stable release configuration,
		even though no guest OSes for Alpha can run yet.
20060505	Adding a generic 'settings' object, which will contain
		references to settable variables (which will later be possible
		to access using the debugger).
20060506	Updating dev_disk and corresponding demo/documentation (and
		switching from SCSI to IDE disk types, so it actually works
		with current test machines :-).
20060510	Adding a -D_LARGEFILE_SOURCE hack for 64-bit Linux hosts,
		so that fseeko() doesn't give a warning.
		Updating the section about how dyntrans works (the "runnable
		IR") in doc/intro.html.
		Instruction updates (some x64=1 checks, some more R5900
		dyntrans stuff: better mul/mult separation from MIPS32/64,
		adding ei and di).
		Updating MIPS cpuregs.h to a newer one (from NetBSD).
		Adding more MIPS dyntrans instructions: deret, ehb.
20060514	Adding disassembly and beginning implementation of SPARC wr
		and wrpr instructions.
20060515	Adding a SUN SPARC machine mode, with dummy SS20 and Ultra1
		machines. Adding the 32-bit "rd psr" instruction.
20060517	Disassembly support for the general SPARC rd instruction.
		Partial implementation of the cmp (subcc) instruction.
		Some other minor updates (making sure that R5900 processors
		start up with the EIE bit enabled, otherwise Linux/playstation2
		receives no interrupts).
20060519	Minor MIPS updates/cleanups.
20060521	Moving the MeshCube machine into evbmips; this seems to work
		reasonably well with a snapshot of a NetBSD MeshCube kernel.
		Cleanup/fix of MIPS config0 register initialization.
20060529	Minor MIPS fixes, including a sign-extension fix to the
		unaligned load/store code, which makes NetBSD/pmax on R3000
		work better with dyntrans. (Ultrix and Linux/DECstation still
		don't work, though.)
20060530	Minor updates to the Alpha machine mode: adding an AlphaBook
		mode, an LCA bus (forwarding accesses to an ISA bus), etc.
20060531	Applying a bugfix for the MIPS dyntrans sc[d] instruction from
		Ondrej Palkovsky. (Many thanks.)
20060601	Minifix to allow ARM immediate msr instruction to not give
		an error for some valid values.
		More Alpha updates.
20060602	Some minor Alpha updates.
20060603	Adding the Alpha cmpbge instruction. NetBSD/alpha prints its
		first boot messages :-) on an emulated Alphabook 1.
20060612	Minor updates; adding a dev_ether.h include file for the
		testmachine ether device. Continuing the hunt for the dyntrans
		bug which makes Linux and Ultrix on DECstation behave
		strangely... FINALLY found it! It seems to be related to
		invalidation of the translation cache, on tlbw{r,i}. There
		also seems to be some remaining interrupt-related problems.
20060614	Correcting the implementation of ldc1/sdc1 for MIPS dyntrans
		(so that it uses 16 32-bit registers if the FR bit in the
		status register is not set).
		Removing the old MIPS interpretation mode.
		Removing the MFHILO_DELAY and instruction delay stuff, because
		they wouldn't work with dyntrans anyway.
20060617	Some documentation updates (adding "NetBSD-archive" to some
		URLs, and new Debian/DECstation installation screenshots).
		Removing the "tracenull" and "enable-caches" configure options.
		Improving MIPS dyntrans performance somewhat (only invalidate
		translations if necessary, on writes to the entryhi register,
		instead of doing it for all cop0 writes).
20060618	More cleanup after the removal of the old MIPS emulation.
		Trying to fix the MIPS dyntrans performance bugs/bottlenecks;
		only semi-successful so far (for R3000).
20060620	Minor update to allow clean compilation again on Tru64/Alpha.
20060622	MIPS cleanup and fixes (removing the pc_last stuff, which
		doesn't make sense with dyntrans anyway, and fixing a cross-
		page-delay-slot-with-exception case in end_of_page).
		Removing the old max_random_cycles_per_chunk stuff, and the
		concept of cycles vs instructions for MIPS emulation.
		FINALLY found and fixed the bug which caused NetBSD/pmax
		clocks to behave strangely (it was a load to the zero register,
		which was treated as a NOP; now it is treated as a load to a
		dummy scratch register).
20060623	Increasing the dyntrans chunk size back to
		Preparing for a quick release, even though there are known
		bugs, and performance for non-R3000 MIPS emulation is very
		poor. :-/
		Reverting to half the dyntrans chunk size again, because
		NetBSD/cats seemed less stable with full size chunks. :(
		NetBSD/sgimips 3.0 can now run :-)  (With release 0.3.8, only
		NetBSD/sgimips 2.1 worked, not 3.0.)

==============  RELEASE 0.4.0  ==============

1 dpavlin 24 Release notes for Gavare's eXperimental Emulator (GXemul), 0.4.0
2 dpavlin 20 ================================================================
3 dpavlin 2
4 dpavlin 22 Copyright (C) 2003-2006 Anders Gavare.
5 dpavlin 2
7 dpavlin 14 GXemul is an experimental instruction-level machine emulator. Several
8     emulation modes are available. In some modes, processors and surrounding
9 dpavlin 12 hardware components are emulated well enough to let unmodified operating
10     systems (e.g. NetBSD) run as if they were running on a real machine.
11 dpavlin 2
12 dpavlin 22 The documentation lists the machines and guest operating systems that can
13     be regarded as "working" in GXemul. The best supported guest operating
14     systems are probably NetBSD/pmax, NetBSD/cats, and OpenBSD/cats.
15 dpavlin 2
16 dpavlin 20
17 dpavlin 24 The most important change between release 0.3.8 and 0.4.0 is:
18 dpavlin 12
19 dpavlin 24 o) The emulation of MIPS processors has been completely rewritten;
20     it now uses the same portable dynamic translation system as the
21     ARM and PowerPC emulation modes.
22 dpavlin 2
23 dpavlin 24 On Alpha and i386 hosts (and AMD64 hosts running in 32-bit mode),
24     GXemul previously used translation into native code. This release
25     will perform worse than 0.3.8 on those host architectures.
26 dpavlin 10
27 dpavlin 24 On all other hosts (including AMD64 running in native 64-bit mode),
28     0.4.0 is likely to be faster than 0.3.8, when emulating MIPS, at
29     least for R3000 emulation.
30 dpavlin 2
31 dpavlin 24 I think that in the long term, moving towards full portability like
32     this is a good idea.
33 dpavlin 2
34 dpavlin 24 (Since the MIPS emulation mode has been rewritten from scratch, and I have
35     not really had much time over for debugging, there are most likely new
36     bugs in 0.4.0 that were not present in 0.3.8. However, I feel that it is
37     better to make a quick release now than to wait even longer.)
38 dpavlin 2
39 dpavlin 24 There have also been many other changes, including, but not limited to:
40 dpavlin 2
41 dpavlin 24 o) The "test machine" functionality is more well-defined than before,
42     and some tutorial-like demos have been added. These could be useful
43     e.g. in operating system construction courses.
44 dpavlin 20
45 dpavlin 24 o) NetBSD/sgimips 3.0 works now. This is most likely due to the rewrite
46     of the MIPS emulation mode. Previous releases of GXemul only worked
47     with NetBSD/sgimips 2.1.
49     o) I have begun implementing rudimentary support for GDB remote serial
50     protocol connections. This means that you can run e.g. the Data
51     Display Debugger, and connect it to a GXemul instance.
53     No advanced GDB functionality is working yet, but starting and
54     stopping the emulated machine and single-stepping should work.
56     Please read the HISTORY files for more details.
59 dpavlin 2 Files included in this release are:
61 dpavlin 24 BUGS List of known bugs for this release.
62 dpavlin 2 HISTORY Detailed revision history / changelog.
63     LICENSE Copyright message / license.
64     README Quick start instructions, for the impatient.
65     RELEASE This file.
66     TODO TODO notes.
67 dpavlin 4 configure, Makefile.skel sh and make scripts for building GXemul.
68 dpavlin 24 demos Tutorial-like demos of testmachine functionality.
69 dpavlin 2 doc Documentation.
70     experiments Experimental code. (Usually not needed.)
71 dpavlin 4 src Source code.
72 dpavlin 2
73 dpavlin 24 To build the emulator, run the configure script, and then run make. This
74 dpavlin 22 should work on most Unix-like systems.
75 dpavlin 2
76 dpavlin 24
77 dpavlin 4 Regarding files in the src/include/ directory: only some of these are written
78     by me, the rest are from other sources (such as NetBSD). The license text says
79 dpavlin 2 that "All advertising materials mentioning features or use of this software"
80     must display acknowledgements. Even though I do NOT feel I mention features or
81     use of the header files (the "software") in any advertising materials, I am
82     still very grateful for the fact that these people have made their files
83     available for re-use, so regardless of legal requirements, I guess thanking
84     them like this is in order:
86     This product includes software developed by the University of
87     California, Berkeley and its contributors.
89     This product includes software developed for the
90     NetBSD Project. See http://www.netbsd.org/ for
91     information about NetBSD.
93     This product includes software developed by Jonathan Stone for
94     the NetBSD Project.
96     This product includes software developed for the NetBSD Project
97     by Matthias Drochner.
99     This product includes software developed by the NetBSD
100     Foundation, Inc. and its contributors.
102     This product includes software developed by Christopher G. Demetriou.
103     [for the NetBSD Project.]
105     This product includes software developed by Adam Glass.
107     This product includes software developed by the PocketBSD project
108     and its contributors.
110     This product includes software developed by Peter Galbavy.
112     Carnegie Mellon University (multiple header files,
113     no specific advertisement text required)
115     This product includes software developed by Charles M. Hannum.
117     This product includes software developed under OpenBSD by Per Fogelström.
119     This product includes software developed by Per Fogelström.
121     This product includes software developed at Ludd, University of
122     Luleå, Sweden and its contributors.
124     This product includes software developed by Hellmuth Michaelis
125     and Joerg Wunsch
127     The font(s) in devices/fonts are Copyright (c) 1992, 1993, 1994
128     by Hellmuth Michaelis and Joerg Wunsch. ("This product includes software
129     developed by Hellmuth Michaelis and Joerg Wunsch", well, the font
130     is maybe not software, but still...)
132     impactsr-bsd.h is Copyright (C) 2004 by Stanislaw Skowronek.
134     This product includes software developed for the NetBSD Project by
135     Wasabi Systems, Inc. [by Simon Burge]
137     arcbios_other.h is Copyright (c) 1996 M. Warner Losh.
139     This product includes software developed by Marc Horowitz.
141 dpavlin 14 This product includes software developed by Brini.
143     This product includes software developed by Mark Brinicombe
144     for the NetBSD Project.
146 dpavlin 20 This product includes software developed by TooLs GmbH.
148     This product includes software developed by Manuel Bouyer.
150 dpavlin 22 This product includes software developed by the Alice Group.
152 dpavlin 24 This product includes software developed by Ichiro FUKUHARA.
154 dpavlin 12 Also, src/include/alpha_rpb.h requires the following:
156     Copyright (c) 1994, 1995, 1996 Carnegie-Mellon University.
157     All rights reserved.
159     Author: Keith Bostic, Chris G. Demetriou
161     Permission to use, copy, modify and distribute this software and
162     its documentation is hereby granted, provided that both the copyright
163     notice and this permission notice appear in all copies of the
164     software, derivative works or modified versions, and any portions
165     thereof, and that both notices appear in supporting documentation.
167 dpavlin 2 See individual files for license details, if you plan to redistribute GXemul
168     or reuse code.
170 dpavlin 24
171 dpavlin 22 Thanks to (in no specific order) Joachim Buss, Olivier Houchard, Juli Mallett,
172     Juan Romero Pardines, Alec Voropay, Göran Weinholt, Alexander Yurchenko, and
173     everyone else who has provided me with feedback.
174 dpavlin 2
175 dpavlin 24 Special thanks to Alec Voropay for testing this release with Linux
176     kernels, and on Cygwin, and also thanks to Ondrej Palkovsky for testing
177     with HelenOS.
179 dpavlin 2 If you have found GXemul useful in some way, or feel like sending me comments
180     or feedback in general, then mail me at anders(at)gavare.se.

  ViewVC Help
Powered by ViewVC 1.1.26