/[gxemul]/trunk/README
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Contents of /trunk/README

Parent Directory Parent Directory | Revision Log Revision Log


Revision 30 - (show annotations)
Mon Oct 8 16:20:40 2007 UTC (13 years, 3 months ago) by dpavlin
File size: 3281 byte(s)
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.1325 2006/08/15 15:38:37 debug Exp $
20060723	More Transputer instructions (pfix, nfix, opr, mint, ldl, ldlp,
		eqc, rev, ajw, stl, stlf, sthf, sub, ldnl, ldnlp, ldpi, move,
		wcnt, add, bcnt).
		Adding more SPARC instructions (andcc, addcc, bl, rdpr).
		Progress on the igsfb framebuffer used by NetBSD/netwinder.
		Enabling 8-bit fills in dev_fb.
		NetBSD/netwinder 3.0.1 can now run from a disk image :-)
20060724	Cleanup/performance fix for 64-bit virtual translation table
		updates (by removing the "timestamp" stuff). A full NetBSD/pmax
		3.0.1 install for R4400 has dropped from 667 seconds to 584 :)
		Fixing the igsfb "almost vga" color (it is 24-bit, not 18-bit).
		Adding some MIPS instruction combinations (3*lw, and 3*addu).
		The 8048 keyboard now turns off interrupt enable between the
		KBR_ACK and the KBR_RSTDONE, to work better with Linux 2.6.
		Not causing PPC DEC interrupts if PPC_NO_DEC is set for a
		specific CPU; NetBSD/bebox gets slightly further than before.
		Adding some more SPARC instructions: branches, udiv.
20060725	Refreshing dev_pckbc.c a little.
		Cleanups for the SH emulation mode, and adding the first
		"compact" (16-bit) instructions: various simple movs, nop,
		shll, stc, or, ldc.
20060726	Adding dummy "pcn" (AMD PCnet NIC) PCI glue.
20060727	Various cleanups; removing stuff from cpu.h, such as
		running_translated (not really meaningful anymore), and
		page flags (breaking into the debugger clears all translations
		anyway).
		Minor MIPS instruction combination updates.
20060807	Expanding the 3*sw and 3*lw MIPS instruction combinations to
		work with 2* and 4* too, resulting in a minor performance gain.
		Implementing a usleep hack for the RM52xx/MIPS32/MIPS64 "wait"
		instruction (when emulating 1 cpu).
20060808	Experimenting with some more MIPS instruction combinations.
		Implementing support for showing a (hardcoded 12x22) text
		cursor in igsfb.
20060809	Simplifying the NetBSD/evbmips (Malta) install instructions
		somewhat (by using a NetBSD/pmax ramdisk install kernel).
20060812	Experimenting more with the MIPS 'wait' instruction.
		PCI configuration register writes can now be handled, which
		allow PCI IDE controllers to work with NetBSD/Malta 3.0.1 and
		NetBSD/cobalt 3.0.1. (Previously only NetBSD 2.1 worked.)
20060813	Updating dev_gt.c based on numbers from Alec Voropay, to enable
		Linux 2.6 to use PCI on Malta.
		Continuing on Algor interrupt stuff.
20060814	Adding support for routing ISA interrupts to two different
		interrupts, making it possible to run NetBSD/algor :-)
20060814-15	Testing for the release.

==============  RELEASE 0.4.2  ==============


1 Gavare's eXperimental Emulator -- GXemul 0.4.2
2 ==================================================
3
4 Copyright (C) 2003-2006 Anders Gavare.
5
6
7 Overview -- What is GXemul?
8 -----------------------------
9
10 GXemul is an experimental instruction-level machine emulator. Several
11 emulation modes are available. In some modes, processors and surrounding
12 hardware components are emulated well enough to let unmodified operating
13 systems (e.g. NetBSD) run as if they were running on a real machine.
14
15 Processors (ARM, MIPS, PowerPC) are emulated using a kind of dynamic
16 translation system. Performance is somewhere between traditional
17 interpretation and recompilation into native code. However, the dynamic
18 translation system used in GXemul does not (currently) generate native
19 code, and thus does not require platform-specific back-ends. In plain
20 English, this means that the dyntrans system works on any host platform.
21
22 Possible uses of the emulator include:
23
24 o) educational purposes, e.g. to learn how to write code for MIPS
25
26 o) hobby operating system development; the emulator can be used as a
27 complement to testing your code on real hardware
28
29 o) running guest operating systems in a "sandboxed" environment
30
31 o) compiling your source code inside a guest operating system which you
32 otherwise would not have access to (e.g. various exotic ports of
33 NetBSD), to make sure that your source code is portable to those
34 platforms
35
36 o) simulating (ethernet) networks of computers running various
37 operating systems, to study their interaction with each other
38
39 o) debugging code in general
40
41 Use your imagination :-)
42
43
44 GXemul's limitations
45 --------------------
46
47 o) GXemul is not (in general) a cycle-accurate simulator, because it does
48 not simulate things smaller than an instruction. Pipe-line stalls,
49 instruction latency effects etc. are more or less completely ignored.
50
51 o) Hardware devices have been implemented in an ad-hoc and as-needed
52 manner, usually only enough to fool certain guest operating systems
53 (e.g. NetBSD) that the hardware devices exist and function well
54 enough for those guest operating systems to use them.
55
56 A consequence of this is that a machine mode may be implemented well
57 enough to run NetBSD for that machine mode, but other guest operating
58 systems may not run at all, or behave strangely.
59
60
61 Quick start
62 -----------
63
64 To compile, type './configure' and then 'make'. This should work on most
65 Unix-like systems. If it does not, then please mail me a bug report.
66
67 You might want to experiment with various CC and CFLAGS environment
68 variable settings, to get optimum performance.
69
70 If you are impatient, and want to try out running a guest operating system
71 inside GXemul, read this: doc/guestoses.html#netbsdcatsinstall
72
73 If you want to use GXemul for experimenting with code of your own,
74 then I suggest you compile a Hello World program according to the tips
75 listed here: doc/experiments.html#hello
76
77 Please read the rest of the documentation in the doc/ sub-directory for
78 more detailed information on how to use the emulator.
79
80
81 Feedback
82 --------
83
84 If you have found GXemul useful in some way, or feel like sending me
85 comments or feedback in general, then mail me at anders(at)gavare.se.
86

  ViewVC Help
Powered by ViewVC 1.1.26