/[gxemul]/trunk/README
This is repository of my old source code which isn't updated any more. Go to git.rot13.org for current projects!
ViewVC logotype

Contents of /trunk/README

Parent Directory Parent Directory | Revision Log Revision Log


Revision 14 - (show annotations)
Mon Oct 8 16:18:51 2007 UTC (11 years, 9 months ago) by dpavlin
File size: 1338 byte(s)
++ trunk/HISTORY	(local)
$Id: HISTORY,v 1.982 2005/10/07 22:45:32 debug Exp $
20050816	Some success in decoding the way the SGI O2 PROM draws graphics
		during bootup; lines/rectangles and bitmaps work, enough to
		show the bootlogo etc. :-)
		Adding more PPC instructions, and (dummy) BAT registers.
20050817	Updating the pckbc to support scancode type 3 keyboards
		(required in order to interact with the SGI O2 PROM).
		Adding more PPC instructions.
20050818	Adding more ARM instructions; general register forms.
		Importing armreg.h from NetBSD (ARM cpu ids). Adding a (dummy)
		CATS machine mode (using SA110 as the default CPU).
		Continuing on general dyntrans related stuff.
20050819	Register forms for ARM load/stores. Gaah! The Compaq C Compiler
		bug is triggered for ARM loads as well, not just PPC :-(
		Adding full support for ARM PC-relative load/stores, and load/
		stores where the PC register is the destination register.
		Adding support for ARM a.out binaries.
20050820	Continuing to add more ARM instructions, and correcting some
		bugs. Continuing on CATS emulation.
		More work on the PPC stuff.
20050821	Minor PPC and ARM updates. Adding more machine types.
20050822	All ARM "data processing instructions" are now generated
		automatically.
20050824	Beginning the work on the ARM system control coprocessor.
		Adding support for ARM halfword load/stores, and signed loads.
20050825	Fixing an important bug related to the ARM condition codes.
		OpenBSD/zaurus and NetBSD/netwinder now print some boot
		messages. :)
		Adding a dummy SH (Hitachi SuperH) cpu family.
		Beginning to add some ARM virtual address translation.
		MIPS bugfixes: unaligned PC now cause an ADEL exception (at
		least for non-bintrans execution), and ADEL/ADES (not
		TLBL/TLBS) are used if userland tries to access kernel space.
		(Thanks to Joshua Wise for making me aware of these bugs.)
20050827	More work on the ARM emulation, and various other updates.
20050828	More ARM updates.
		Finally taking the time to work on translation invalidation
		(i.e. invalidating translated code mappings when memory is
		written to). Hopefully this doesn't break anything.
20050829	Moving CPU related files from src/ to a new subdir, src/cpus/.
		Moving PROM emulation stuff from src/ to src/promemul/.
		Better debug instruction trace for ARM loads and stores.
20050830	Various ARM updates (correcting CMP flag calculation, etc).
20050831	PPC instruction updates. (Flag fixes, etc.)
20050901	Various minor PPC and ARM instruction emulation updates.
		Minor OpenFirmware emulation updates.
20050903	Adding support for adding arbitrary ARM coprocessors (with
		the i80321 I/O coprocessor as a first test).
		Various other ARM and PPC updates.
20050904	Adding some SHcompact disassembly routines.
20050907	(Re)adding a dummy HPPA CPU module, and a dummy i960 module.
20050908	Began hacking on some Apple Partition Table support.
20050909	Adding support for loading Mach-O (Darwin PPC) binaries.
20050910	Fixing an ARM bug (Carry flag was incorrectly updated for some
		data processing instructions); OpenBSD/cats and NetBSD/
		netwinder get quite a bit further now.
		Applying a patch to dev_wdc, and a one-liner to dev_pcic, to
		make them work better when emulating new versions of OpenBSD.
		(Thanks to Alexander Yurchenko for the patches.)
		Also doing some other minor updates to dev_wdc. (Some cleanup,
		and finally converting to devinit, etc.)
20050912	IRIX doesn't have u_int64_t by default (noticed by Andreas
		<avr@gnulinux.nl>); configure updated to reflect this.
		Working on ARM register bank switching, CPSR vs SPSR issues,
		and beginning the work on interrupt/exception support.
20050913	Various minor ARM updates (speeding up load/store multiple,
		and fixing a ROR bug in R(); NetBSD/cats now boots as far as
		OpenBSD/cats).
20050917	Adding a dummy Atmel AVR (8-bit) cpu family skeleton.
20050918	Various minor updates.
20050919	Symbols are now loaded from Mach-O executables.
		Continuing the work on adding ARM exception support.
20050920	More work on ARM stuff: OpenBSD/cats and NetBSD/cats reach
		userland! :-)
20050921	Some more progress on ARM interrupt specifics.
20050923	Fixing linesize for VR4121 (patch by Yurchenko). Also fixing
		linesizes/cachesizes for some other VR4xxx.
		Adding a dummy Acer Labs M1543 PCI-ISA bridge (for CATS) and a
		dummy Symphony Labs 83C553 bridge (for Netwinder), usable by 
		dev_footbridge.
20050924	Some PPC progress.
20050925	More PPC progress.
20050926	PPC progress (fixing some bugs etc); Darwin's kernel gets
		slightly further than before.
20050928	Various updates: footbridge/ISA/pciide stuff, and finally
		fixing the VGA text scroll-by-changing-the-base-offset bug.
20050930	Adding a dummy S3 ViRGE pci card for CATS emulation, which
		both NetBSD and OpenBSD detects as VGA.
		Continuing on Footbridge (timers, ISA interrupt stuff).
20051001	Continuing... there are still bugs, probably interrupt-
		related.
20051002	More work on the Footbridge (interrupt stuff).
20051003	Various minor updates. (Trying to find the bug(s).)
20051004	Continuing on the ARM stuff.
20051005	More ARM-related fixes.
20051007	FINALLY! Found and fixed 2 ARM bugs: 1 memory related, and the
		other was because of an error in the ARM manual (load multiple
		with the S-bit set should _NOT_ load usermode registers, as the
		manual says, but it should load saved registers, which may or
		may not happen to be usermode registers).
		NetBSD/cats and OpenBSD/cats seem to install fine now :-)
		except for a minor bug at the end of the OpenBSD/cats install.
		Updating the documentation, preparing for the next release.
20051008	Continuing with release testing and cleanup.

1 Gavare's eXperimental Emulator -- GXemul 0.3.6
2 ==================================================
3
4 Copyright (C) 2003-2005 Anders Gavare.
5
6
7 Overview
8 --------
9
10 GXemul is an experimental instruction-level machine emulator. Several
11 emulation modes are available. In some modes, processors and surrounding
12 hardware components are emulated well enough to let unmodified operating
13 systems (e.g. NetBSD) run as if they were running on a real machine.
14
15 The processor architecture best emulated by GXemul is MIPS, but other
16 architectures are also partially emulated.
17
18
19 Quick start
20 -----------
21
22 To compile, type './configure' and then 'make'. This should work on most
23 Unix-like systems. If not, then please mail me a bug report.
24
25 If you are impatient, and want to try out running a guest operating system
26 inside GXemul, please read this: doc/guestoses.html#netbsdinstall
27
28 If you want to use GXemul for experimenting with code of your own,
29 then I suggest you compile a Hello World program according to the tips
30 listed here: doc/experiments.html#hello
31
32 Please read the rest of the documentation in the doc/ sub-directory for
33 more detailed information on how to use the emulator.
34
35
36 Feedback
37 --------
38
39 If you have found GXemul useful in some way, or feel like sending me
40 comments or feedback in general, then mail me at anders(at)gavare.se.
41

  ViewVC Help
Powered by ViewVC 1.1.26