| 1 |
/* |
/* |
| 2 |
* Cisco 7200/3600 simulation platform. |
* Cisco 7200/3600/2691 simulation platform. |
| 3 |
*/ |
*/ |
| 4 |
|
|
| 5 |
15-Aug-2005, the project is starting. |
15-Aug-2005, the project is starting. |
| 1594 |
- Centralized NM/PA EEPROM to have common definitions for platforms |
- Centralized NM/PA EEPROM to have common definitions for platforms |
| 1595 |
with the same type of network interfaces. |
with the same type of network interfaces. |
| 1596 |
- 0.2.6-RC2 release. |
- 0.2.6-RC2 release. |
| 1597 |
|
|
| 1598 |
|
19-Oct-2006 |
| 1599 |
|
----------- |
| 1600 |
|
- C2691: added sketelon code. |
| 1601 |
|
- C2691: working DUART. |
| 1602 |
|
- C2691: added mainboard EEPROM. |
| 1603 |
|
|
| 1604 |
|
20-Oct-2006 |
| 1605 |
|
----------- |
| 1606 |
|
- Bugfix: dec21140 and amd79c97x were incorrectly discarding frames based |
| 1607 |
|
on the source address, preventing HSRP/VRRP to work (BTS entry #75). |
| 1608 |
|
- C2691: added hypervisor module to handle instances. |
| 1609 |
|
|
| 1610 |
|
22-Oct-2006 |
| 1611 |
|
----------- |
| 1612 |
|
- C2691: trying to understand the network interrupt mechanism. |
| 1613 |
|
|
| 1614 |
|
23-Oct-2006 |
| 1615 |
|
----------- |
| 1616 |
|
- C2691: fixed Galileo interrupt (IRQ 3), allowing packets to be received! |
| 1617 |
|
- Added a basic GT96100 system controller (for C2691). |
| 1618 |
|
- GT96100: added MII registers. |
| 1619 |
|
- Added a basic Flash device to be used as ROM+NVRAM for C2691. |
| 1620 |
|
- C2691: NVRAM (simulated from flash) is now ok. |
| 1621 |
|
- C2691: Analyzed environmental monitor register. No warning anymore. |
| 1622 |
|
|
| 1623 |
|
24-Oct-2006 |
| 1624 |
|
----------- |
| 1625 |
|
- C2691: NVRAM config export is working, config import requires more work |
| 1626 |
|
(since write operations to flash are not immediate). |
| 1627 |
|
- Allowed Galileo DMA IRQ to preempt the idle loop. |
| 1628 |
|
- Fixed ATA Flash "current of sectors per card" which must be in LSW/MSW |
| 1629 |
|
order and not MSW/LSW. |
| 1630 |
|
- Added another ATA Flash access method (for c2691). |
| 1631 |
|
- C2691: added support for CompactFlash. |
| 1632 |
|
|
| 1633 |
|
25-Oct-2006 |
| 1634 |
|
----------- |
| 1635 |
|
- GT96100: added some definitions for the Ethernet part. |
| 1636 |
|
|
| 1637 |
|
26-Oct-2006 |
| 1638 |
|
----------- |
| 1639 |
|
- Working on TX part for GT96100. Unfortunately, don't know yet how to |
| 1640 |
|
signal an interrupt for it on the 2691 platform :( |
| 1641 |
|
|
| 1642 |
|
27-Oct-2006 |
| 1643 |
|
----------- |
| 1644 |
|
- C2691: found how to announce correctly NM presence in slot 1. |
| 1645 |
|
- GT96100: finally found how to notify appropriately the network interrupt: |
| 1646 |
|
the Serial Cause Register has to be handled. |
| 1647 |
|
- C2691: added the glue code to set up GT96100 ethernet ports. |
| 1648 |
|
- GT96100: added RX part. Packets are now sucessfully handled. |
| 1649 |
|
- C2691: better understanding of network interrupt status registers. |
| 1650 |
|
- C2691: added correct flash code detection. |
| 1651 |
|
- GT96100: fixed the "PHY reset" problem. |
| 1652 |
|
- C2691: added default correct chassis base MAC address. |
| 1653 |
|
|
| 1654 |
|
28-Oct-2006 |
| 1655 |
|
----------- |
| 1656 |
|
- GT96100: added hash function (Mode 0 ok, Mode 1 to fix) for Ethernet |
| 1657 |
|
address filtering + appropriate definitions. |
| 1658 |
|
|
| 1659 |
|
29-Oct-2006 |
| 1660 |
|
----------- |
| 1661 |
|
- GT96100: fixed hash mode 1 (not tested). |
| 1662 |
|
- GT96100: added address filtering process. |
| 1663 |
|
|
| 1664 |
|
30-Oct-2006 |
| 1665 |
|
----------- |
| 1666 |
|
- GT96100: added minimal MIB counters. |
| 1667 |
|
- Implemented LBA mode for PCMCIA ATA disk devices and fixed data access. |
| 1668 |
|
- Changed the default idle sleep time from 50ms to 30ms to avoid timer |
| 1669 |
|
IRQ loss and timer drift. |
| 1670 |
|
- Added hypervisor command "vm show_timer_drift <vm_instance> <cpu_id>" |
| 1671 |
|
to display potential problem with a given idle-pc value. |
| 1672 |
|
- C2691: added proper support for IO memory. |
| 1673 |
|
- NM-16ESW: generalized code to support multiple platforms. |
| 1674 |
|
- C2691: added support for NM-16ESW. |
| 1675 |
|
|
| 1676 |
|
31-Oct-2006 |
| 1677 |
|
----------- |
| 1678 |
|
- C3725: initial support. Hardware very similar to c2691: Cisco rocks! |
| 1679 |
|
- C3745: added skeleton. |
| 1680 |
|
- C3745: fixed GT96100 address. |
| 1681 |
|
- C3745: added PCI bridges. |
| 1682 |
|
- C3745: Network Modules are working! |
| 1683 |
|
- C3745: CompactFlash working. |
| 1684 |
|
|
| 1685 |
|
01-Nov-2006 |
| 1686 |
|
----------- |
| 1687 |
|
- C3745: finally understood how to handle the system EEPROMs. |
| 1688 |
|
- Updated documentation (README). |
| 1689 |
|
- GT96100: minor enhancement of interrupt handling. |
| 1690 |
|
|
| 1691 |
|
02-Nov-2006 |
| 1692 |
|
----------- |
| 1693 |
|
- Added support for "ghost" RAM: instances use a RAM file (previously |
| 1694 |
|
created) and use copy-on-write on it. It allows to share common memory |
| 1695 |
|
between instances and so less memory is used. |
| 1696 |
|
|
| 1697 |
|
03-Nov-2006 |
| 1698 |
|
----------- |
| 1699 |
|
- Better support for ghost RAM, added hypervisor commands |
| 1700 |
|
"vm set_ghost_status" and "vm set_ghost_file". |
| 1701 |
|
|
| 1702 |
|
04-Nov-2006 |
| 1703 |
|
----------- |
| 1704 |
|
- NM-16ESW: fixed incorrect BPDU handling (which caused to add a 2nd |
| 1705 |
|
802.1Q tag to BPDU packets) and now 0100.0ccc.cccd is recognized as |
| 1706 |
|
a BPDU MAC address (BTS entry #). |
| 1707 |
|
- DEC21140: fixed CSR8 handling (missed frame counter), which returned |
| 1708 |
|
an undefined value (BTS entry #81). |
| 1709 |
|
- Merged a patch from Rostislav Opocensky who added support for C3600 |
| 1710 |
|
in nvram_export utility. |
| 1711 |
|
- Re-enaebled debugging info for NM-16ESW on 2691/3600/37xx. |
| 1712 |
|
|
| 1713 |
|
05-Nov-2006 |
| 1714 |
|
----------- |
| 1715 |
|
- NM-16ESW: fixed a crash due to incomplete device removal. |
| 1716 |
|
|
| 1717 |
|
06-Nov-2006 |
| 1718 |
|
----------- |
| 1719 |
|
- Validated use of Serial interfaces with 2691/3725/3745. |
| 1720 |
|
- Correct config register handling for 3600/2691/3725/3745 platforms |
| 1721 |
|
(config register setting was ignored). |
| 1722 |
|
- Added detection of empty NVRAM for 2691/3725/3745 to set the ignore config |
| 1723 |
|
flag in the config register (to boot faster). |
| 1724 |
|
- C3745: Fixed NVRAM properties. |
| 1725 |
|
- C7200/C3600: rewrite of configuration push into NVRAM (can now be done |
| 1726 |
|
offline). |
| 1727 |
|
- C2691/C3725/C3745: added support for config push into ROM flash |
| 1728 |
|
(simulated NVRAM). |
| 1729 |
|
|
| 1730 |
|
07-Nov-2006 |
| 1731 |
|
----------- |
| 1732 |
|
- Modified config export from NVRAM for all platforms (can now be done |
| 1733 |
|
offline). |
| 1734 |
|
- Better handling of base MAC address (2691/3725/3745 + NM-16ESW). |
| 1735 |
|
|
| 1736 |
|
08-Nov-2006 |
| 1737 |
|
----------- |
| 1738 |
|
- Rework of the MTS subsystem (generalization of MTS64 algorithms to MTS32 |
| 1739 |
|
which was broken). |
| 1740 |
|
- Fast memory operations for 32-bit mode. |
| 1741 |
|
|
| 1742 |
|
09-Nov-2006 |
| 1743 |
|
----------- |
| 1744 |
|
- Rewrite of the MIPS TLB lookup operation. |
| 1745 |
|
|
| 1746 |
|
10-Nov-2006 |
| 1747 |
|
----------- |
| 1748 |
|
- Fixed another bug in TLB lookup. |
| 1749 |
|
- Beginning of work for PA-MC-8TE1 support. |
| 1750 |
|
- Added hypervisor commands to send messages to instances VTTY. |
| 1751 |
|
- Working on PLX PCI9054 for PA-MC-8TE1. |
| 1752 |
|
|
| 1753 |
|
11-Nov-2006 |
| 1754 |
|
----------- |
| 1755 |
|
- Continuing a bit on PA-MC-8TE1. |
| 1756 |
|
|
| 1757 |
|
14-Nov-2006 |
| 1758 |
|
----------- |
| 1759 |
|
- Correct handling of VPN2 mask for TLB lookup. |
| 1760 |
|
- bugfix: support of c3745 was missing in the hypervisor. |
| 1761 |
|
- Merged a patch from Akim Dreyer for Debian support. |
| 1762 |
|
- 0.2.6-RC3 release. |
| 1763 |
|
|
| 1764 |
|
15-Nov-2006 |
| 1765 |
|
----------- |
| 1766 |
|
- C2691/C3725: fixed a crash occuring on some IOS images due to incorrect |
| 1767 |
|
platform type. |
| 1768 |
|
- Modified performance counter to have stats for instructions or blocks |
| 1769 |
|
(cannot be used simultaneously). |
| 1770 |
|
- "beq" jump code (x86) was incorrectly using non-local jump. |
| 1771 |
|
- Bugfix: incorrect number of arguments for hypervisor commands related |
| 1772 |
|
to ghost file handling. |
| 1773 |
|
- 0.2.6-RC4 release. |
| 1774 |
|
|
| 1775 |
|
17-Nov-2006 |
| 1776 |
|
----------- |
| 1777 |
|
- Major code cleanup to make devices independent from the virtual processors. |
| 1778 |
|
- Generic CPU stuff. |
| 1779 |
|
|
| 1780 |
|
20-Nov-2006 |
| 1781 |
|
----------- |
| 1782 |
|
- Merged of patch from Thomas Pani to list VM TCP console ports (required |
| 1783 |
|
for gDynagen). |
| 1784 |
|
- NM-16ESW: fixed (again) BPDU handling (incorrect VLAN tagging with non |
| 1785 |
|
trunk ports). |
| 1786 |
|
- Very minimal PowerPC definitions. Only non-JIT mode at this time. |
| 1787 |
|
- PPC: added "crorc", "cror", "crnor", "crnand", "crandc", "crand". |
| 1788 |
|
- PPC: added "and", "andc", "andi", "andis", "creqv", "crxor". |
| 1789 |
|
- PPC: added "eqv", "isync", "mfmsr", "mtmsr", "nand", "nor", "or", "orc". |
| 1790 |
|
- PPC: added "ori", "oris", "sync", "xor", "xori", "xoris", "mfcr". |
| 1791 |
|
- PPC: added "addi", "addis". |
| 1792 |
|
|
| 1793 |
|
21-Nov-2006 |
| 1794 |
|
----------- |
| 1795 |
|
- PPC: added "cmp", "cmpl", "cmpi", "cmpli", "extsb", "extsh". |
| 1796 |
|
- PPC: added "add", "add.", "and.", "andc.", "extsb.", "extsh.". |
| 1797 |
|
- PPC: added a dummy memory access function (does nothing yet). |
| 1798 |
|
- PPC: added "lbz", "lbzu", "lbzux", "lbzx". |
| 1799 |
|
- PPC: added "lhz", "lhzu", "lhzux", "lhzx". |
| 1800 |
|
- PPC: added "lwz", "lwzu", "lwzux", "lwzx". |
| 1801 |
|
- PPC: added "stb", "stbu", "stbux", "stbx". |
| 1802 |
|
- PPC: added "sth", "sthu", "sthux", "sthx". |
| 1803 |
|
- PPC: added "stw", "stwu", "stwux", "stwx". |
| 1804 |
|
- PPC: added "xor.", "b", "ba", "bl", "bla". |
| 1805 |
|
- bugfix: hypervisor commands specific to CPU crashed if the VM was not |
| 1806 |
|
started (noticed by Greg). |
| 1807 |
|
|
| 1808 |
|
22-Nov-2006 |
| 1809 |
|
----------- |
| 1810 |
|
- PPC: added "addo", "addo.", "addc", "addc.", "addco", "addco." |
| 1811 |
|
- PPC: added "addic", "addic.", "adde", "adde.", "addeo", "addeo." |
| 1812 |
|
- PPC: added "neg", "neg.", "nego", "nego.", "nand.", "nor.", "or.", "orc." |
| 1813 |
|
- PPC: added "slw", "slw.", "srw", "srw." |
| 1814 |
|
|
| 1815 |
|
23-Nov-2006 |
| 1816 |
|
----------- |
| 1817 |
|
- PPC: added "rlwimi", "rlwimi.", "rlwinm", "rlwinm.", "rlwnm", "rlwnm." |
| 1818 |
|
|
| 1819 |
|
24-Nov-2006 |
| 1820 |
|
----------- |
| 1821 |
|
- PPC: added "mulhw", "mulhw.", "mulhwu", "mulhwu.", "mulli". |
| 1822 |
|
- PPC: added "mullw", "mullw.", "mullwo", "mullwo." |
| 1823 |
|
- PPC: added "subf", "subf.", "subfo", "subfo." |
| 1824 |
|
- PPC: added "bc", "bca", "bcl", "bcla", "bclr", "bclrl". |
| 1825 |
|
- PPC: added minimal memory operation glue code. |
| 1826 |
|
|
| 1827 |
|
25-Nov-2006 |
| 1828 |
|
----------- |
| 1829 |
|
- PPC: added dump functions for MMU registers. |
| 1830 |
|
- PPC: added support for BAT registers. |
| 1831 |
|
|
| 1832 |
|
26-Nov-2006 |
| 1833 |
|
----------- |
| 1834 |
|
- PPC: fixed branch offset computation. |
| 1835 |
|
- PPC: added a dummy virtual machines for tests. |
| 1836 |
|
- PPC: fixed bclrx opcodes. |
| 1837 |
|
- PPC: added "mflr", "mtlr". |
| 1838 |
|
|
| 1839 |
|
27-Nov-2006 |
| 1840 |
|
----------- |
| 1841 |
|
- PPC: fixes in comparison functions. |
| 1842 |
|
- PPC: added "subfc", "subfc.", "subfco", "subfco." |
| 1843 |
|
|
| 1844 |
|
28-Nov-2006 |
| 1845 |
|
----------- |
| 1846 |
|
- PPC: added "subfic", "mfctr". |
| 1847 |
|
- PPC: fixed a lot of bugs. |
| 1848 |
|
|
| 1849 |
|
29-Nov-2006 |
| 1850 |
|
----------- |
| 1851 |
|
- PPC: added "rfi", "lha", "lhau", "lhaux", "lhax", "addze", "addme". |
| 1852 |
|
- PPC: fixed "mtcrf". |
| 1853 |
|
|
| 1854 |
|
30-Nov-2006 |
| 1855 |
|
----------- |
| 1856 |
|
- Added IRQ routing vectors for virtual machines. |
| 1857 |
|
|
| 1858 |
|
01-Dec-2006 |
| 1859 |
|
----------- |
| 1860 |
|
- Playing with NPE-G2, just for fun. |
| 1861 |
|
|
| 1862 |
|
02-Dec-2006 |
| 1863 |
|
----------- |
| 1864 |
|
- NPE-G2: environmental monitor is now working! |
| 1865 |
|
|
| 1866 |
|
03-Dec-2006 |
| 1867 |
|
----------- |
| 1868 |
|
- PPC: added an empty MV64460 controller (need the datasheet). |
| 1869 |
|
- PPC: added "lmw" instruction, fixed "stmw". |
| 1870 |
|
- PPC: added "cntlzw". |
| 1871 |
|
|
| 1872 |
|
05-Dec-2006 |
| 1873 |
|
----------- |
| 1874 |
|
- NPE-G2: analyzed midplane data: this is similar to other NPE. |
| 1875 |
|
- Added a basic PLX6520CB PCI bridge. |
| 1876 |
|
- NPE-G2: added appropriate PCI bridges and PCI busses for Port Adapters. |
| 1877 |
|
|
| 1878 |
|
06-Dec-2006 |
| 1879 |
|
----------- |
| 1880 |
|
- NPE-G2: added PCI I/O space. |
| 1881 |
|
- NPE-G2: added CLPD6729, it is now possible to use PCMCIA ATA disks. |
| 1882 |
|
|
| 1883 |
|
08-Dec-2006 |
| 1884 |
|
----------- |
| 1885 |
|
- MV64460: added ugly experimental SDMA support to have a console for the |
| 1886 |
|
NPE-G2 (using the GT96100A datasheet). This code must be rewritten. |
| 1887 |
|
- MV64460/NPE-G2: playing with the various IRQs. |
| 1888 |
|
|
| 1889 |
|
09-Dec-2006 |
| 1890 |
|
----------- |
| 1891 |
|
- PPC: added idle-pc support. |
| 1892 |
|
|
| 1893 |
|
10-Dec-2006 |
| 1894 |
|
----------- |
| 1895 |
|
- PPC: added virtual breakpoint support. |
| 1896 |
|
|
| 1897 |
|
15-Dec-2006 |
| 1898 |
|
----------- |
| 1899 |
|
- PPC: added functions to manually set up page tables. |
| 1900 |
|
- MV64460: added more interrupt definitions (with help of GT96100A manual). |
| 1901 |
|
|
| 1902 |
|
19-Dec-2006 |
| 1903 |
|
----------- |
| 1904 |
|
- MV64460: fixed interrupt loss problem. |
| 1905 |
|
|
| 1906 |
|
20-Dec-2006 |
| 1907 |
|
----------- |
| 1908 |
|
- Basic port of the microcode for the PowerPC platforms. IOS now starts |
| 1909 |
|
normally (like the MIPS64 platforms). |
| 1910 |
|
|
| 1911 |
|
21-Dec-2006 |
| 1912 |
|
----------- |
| 1913 |
|
- NPE-G2: found OIR IRQ. |
| 1914 |
|
- MV64460: added more definitions (for SDMA). |
| 1915 |
|
- Cleanup of MIPS64 JIT code (better naming). |
| 1916 |
|
|
| 1917 |
|
22-Dec-2006 |
| 1918 |
|
----------- |
| 1919 |
|
- PPC32: added the minimal JIT core infrastructure. |
| 1920 |
|
- PPC32-JIT: added unknown opcode handling. |
| 1921 |
|
- PPC32-JIT: added some instructions. |
| 1922 |
|
|
| 1923 |
|
23-24-Dec-2006 |
| 1924 |
|
-------------- |
| 1925 |
|
- PPC32-JIT: added more instructions. |
| 1926 |
|
|
| 1927 |
|
26-Dec-2006 |
| 1928 |
|
----------- |
| 1929 |
|
- PPC32-JIT: continuing... |
| 1930 |
|
|
| 1931 |
|
27-Dec-2006 |
| 1932 |
|
----------- |
| 1933 |
|
- PPC32-JIT: added fast memory operations. |
| 1934 |
|
|
| 1935 |
|
28-Dec-2006 |
| 1936 |
|
----------- |
| 1937 |
|
- Added PPC32 nojit support. |
| 1938 |
|
- PPC32: better checking for IRQs. |
| 1939 |
|
|
| 1940 |
|
29-Dec-2006 |
| 1941 |
|
----------- |
| 1942 |
|
- PPC32-JIT: added "amd64" support. |
| 1943 |
|
- PPC32: added "lwbrx" and "stwbrx" instructions. |
| 1944 |
|
|
| 1945 |
|
30-Dec-2006 |
| 1946 |
|
----------- |
| 1947 |
|
- PPC32: added "tw"/"twi" instructions. |
| 1948 |
|
- PPC32: added TLB support for PowerPC 405. |
| 1949 |
|
- PPC32: added "tlbre", "tlbwe", "iccci", "dccci", "mfdcr", "mtdcr" for |
| 1950 |
|
PowerPC 405. |
| 1951 |
|
- Fixed a bug with ILT tables (incorrect count - last entry was missing). |
| 1952 |
|
|
| 1953 |
|
31-Dec-2006 |
| 1954 |
|
----------- |
| 1955 |
|
- PPC32: added "dcbst" instruction. |
| 1956 |
|
|
| 1957 |
|
05-Jan-2007 |
| 1958 |
|
----------- |
| 1959 |
|
- NPE-G2: correct handling of DUART interrupt with I/O card. |
| 1960 |
|
|
| 1961 |
|
07-Jan-2007 |
| 1962 |
|
----------- |
| 1963 |
|
- NPE-G2: correct console selection (NPE or I/O board) depending on slot 0. |
| 1964 |
|
- PPC32: fixup for decrementer interrupt. |
| 1965 |
|
- Generic CPU MTS rebuild (mips64/ppc32). |
| 1966 |
|
- Split of memory.c / mips64_mem.c. memory.c will only contain generic |
| 1967 |
|
functions independent of the CPU model. |
| 1968 |
|
- Memlogger is now independent of CPU type (untested). |
| 1969 |
|
|
| 1970 |
|
08-Jan-2007 |
| 1971 |
|
----------- |
| 1972 |
|
- Rewrite of the MTS subsystem to have less overhead with inlined |
| 1973 |
|
operations -> better performance. |
| 1974 |
|
|
| 1975 |
|
09-Jan-2007 |
| 1976 |
|
----------- |
| 1977 |
|
- Finished the MTS rewrite (amd64, statistics). |
| 1978 |
|
- NPE-G2: added a 64 Mb bootflash (needs to be tested). |
| 1979 |
|
|
| 1980 |
|
10-Jan-2007 |
| 1981 |
|
----------- |
| 1982 |
|
- PPC32: added clean loading of BAT registers. |
| 1983 |
|
- Fixed device remapping. |
| 1984 |
|
|
| 1985 |
|
12-Jan-2007 |
| 1986 |
|
----------- |
| 1987 |
|
- PPC32: added "lswi", "stswi", "lswx", "stswx". |
| 1988 |
|
|
| 1989 |
|
13-Jan-2007 |
| 1990 |
|
----------- |
| 1991 |
|
- PPC32: fixed carry evaluation for "srawi" instruction. |
| 1992 |
|
|
| 1993 |
|
15-Jan-2007 |
| 1994 |
|
----------- |
| 1995 |
|
- Playing with c2600 to see if support can be added. |
| 1996 |
|
|
| 1997 |
|
17-Jan-2007 |
| 1998 |
|
----------- |
| 1999 |
|
- C2600: adding skeleton code, added NM selection. However, unable |
| 2000 |
|
to get a positive result for "sh diag 0". |
| 2001 |
|
|
| 2002 |
|
19-Jan-2007 |
| 2003 |
|
----------- |
| 2004 |
|
- Experimenting with sparse memory to reduce virtual memory use in |
| 2005 |
|
hypervisor mode. |
| 2006 |
|
|
| 2007 |
|
20-Jan-2007 |
| 2008 |
|
----------- |
| 2009 |
|
- Continuing on sparse memory work. |
| 2010 |
|
|
| 2011 |
|
21-Jan-2007 |
| 2012 |
|
----------- |
| 2013 |
|
- C2600: added mainboard basic support. |
| 2014 |
|
- MPC860: added a basic IDMA support. |
| 2015 |
|
- C2600: first packet exchange :) |
| 2016 |
|
|
| 2017 |
|
22-Jan-2007 |
| 2018 |
|
----------- |
| 2019 |
|
- C2600: added basic mainboard drivers for integrated Ethernet ports. |
| 2020 |
|
- C2600: added IRQ preemption for network interrupt and DUART. |
| 2021 |
|
- Fixed use of sparse memory with ghost files. |
| 2022 |
|
- Added a command line option to test sparse memory ("--sparse-mem"). |
| 2023 |
|
- Added locking for shared ghost images. |
| 2024 |
|
|
| 2025 |
|
24-Jan-2007 |
| 2026 |
|
----------- |
| 2027 |
|
- Validation of dynagen 0.8.3 with sparse memory and ghost image enabled. |
| 2028 |
|
- MIPS64: fixed a bug of the JIT which incorrectly handled jump instructions |
| 2029 |
|
with a delay slot in another page. |
| 2030 |
|
|
| 2031 |
|
25-Jan-2007 |
| 2032 |
|
----------- |
| 2033 |
|
- C2600: added NVRAM configuration import/export and appropriate config |
| 2034 |
|
register setting if NVRAM is empty at startup. |
| 2035 |
|
- C2600: added a basic bootflash support. |
| 2036 |
|
|
| 2037 |
|
26-Jan-2007 |
| 2038 |
|
----------- |
| 2039 |
|
- C2600: io-mem size support. |
| 2040 |
|
|
| 2041 |
|
31-Jan-2007 |
| 2042 |
|
----------- |
| 2043 |
|
- i8254x: added skeleton code (for PA-2FE-TX). |
| 2044 |
|
|
| 2045 |
|
01-Feb-2007 |
| 2046 |
|
----------- |
| 2047 |
|
- i8254x: added MDIO code. |
| 2048 |
|
|
| 2049 |
|
04-Feb-2006 |
| 2050 |
|
----------- |
| 2051 |
|
- C2600: added "set_chassis" hypervisor command. |
| 2052 |
|
- C2600: possible chassis/mainboards now displayed at command line help. |
| 2053 |
|
|
| 2054 |
|
05-Feb-2007 |
| 2055 |
|
----------- |
| 2056 |
|
- Fixed a bug when handling packet discard flag on NM-16ESW (seems to be |
| 2057 |
|
only valid for native packets). |
| 2058 |
|
|
| 2059 |
|
06-Feb-2007 |
| 2060 |
|
----------- |
| 2061 |
|
- Working on i8254x TX part. Problem with TX ring wrapping. |
| 2062 |
|
|
| 2063 |
|
08-Feb-2007 |
| 2064 |
|
----------- |
| 2065 |
|
- Added packet capture to NIO filters, with PCAP output (Greg Anuzelli). |
| 2066 |
|
- i82543: RX and TX parts are now basically working (of course, no IP/TCP |
| 2067 |
|
checksum offloading, but this doesn't seem to be used). |
| 2068 |
|
|
| 2069 |
|
09-Feb-2007 |
| 2070 |
|
----------- |
| 2071 |
|
- C7200: added C7200-IO-2FE card, based on Intel i82543 chips. |
| 2072 |
|
- C7200: added PA-GE interface, but TX part is broken. |
| 2073 |
|
- i8254x: TDH/TDT and RDH/RDT registers are located at a different address. |
| 2074 |
|
PA-GE is now working. |
| 2075 |
|
|
| 2076 |
|
12-Feb-2007 |
| 2077 |
|
----------- |
| 2078 |
|
- i8254x: delayed RX IRQ. |
| 2079 |
|
- MIPS64: fixed (again) TLB lookup for entries in ksseg and kseg3. |
| 2080 |
|
- Added a "byte-swapping" device. |
| 2081 |
|
|
| 2082 |
|
13-Feb-2007 |
| 2083 |
|
----------- |
| 2084 |
|
- i8254x: added byte-swapped data transfer. |
| 2085 |
|
- PA-POS-OC3: applied byte-swapped data transfer for TX ring (RX ring |
| 2086 |
|
doesn't seem to need this - strange). |
| 2087 |
|
|
| 2088 |
|
14-Feb-2007 |
| 2089 |
|
----------- |
| 2090 |
|
- C7200: added C7200-IO-GE+E, based on Intel i82543 chips. |
Parent Directory
| 
Revision Log
| 
Patch